Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “multiple faults”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Autoencoder-Based Sensor Drift Detection and Mitigation for Resilient Charging Systems

This work presents an autoencoder-based approach for sensor signal reconstruction and drift detection for charging systems. The proposed strategy is implemented within a Simulink-based system framework and evaluated under multiple operating conditions. An autoencoder with 8 neurons in the bottleneck layer is adopted, achieving accurate reconstruction across 10 variables and strong agreement with the physical sensor readings under normal conditions. In the case of a sensor fault, the autoencoder reconstruction remains closer to the expected true value compared to the corrupted measurement. Furthermore, feeding the autoencoder-reconstructed signal value back into the control framework in place of the faulty sensor signal leads to improved power monitoring. These results highlight the potential of autoencoder-based virtual sensing to extend the concept of resiliency to all components of the charging system, including sensors.

Rezende Da Costa Reis Kimpara, Renata [ORNL] (ORCI↗

Advanced Geomechanical Model to Predict the Impact of CO2-Induced Microstructural Alterations on the Cohesive-Frictional Behavior of Mt. Simon Sandstone

We investigated the influence of CO2-induced geochemical reactions on the cohesive-frictional properties of host rock within the context of CO2 storage in a saline aquifer and focused on the Mt. Simon sandstone. The research objective was to model geo-mechanical changes due to host rock exposure to CO2-saturated brine while accounting for heterogeneity, double-scale porosity, and granular structure. We formulated a three-level multi-scale model for host rocks. We conducted scanning electron microscopy analyses to probe the microstructure and grid nanoindentation to measure the mechanical response. We derived new nonlinear strength upscaling solutions to correlate the effective strength characteristics and the macroscopic yield surface to the micro-structure at the nano-, micro-, and meso-scales. Specifically, our theoretical model links CO2-induced microstructural alterations to a reduction in the size of the yield surface, and a drop in the value of the friction coefficient. In turn, regarding the Illinois Basin Decatur Project, the CO2-induced drop in friction coefficient is linked to an increase in the risk of fault slip and a higher probability of induced microseismicity during and after the end of CO2 underground injection operations. The theoretical model presented is essential for the geo-mechanical modeling of CO2 underground injection operations at multiple length-scales.

58 GEOSCIENCES↗

On-Ramp Wireless: Program Final Report

The objective of the project was to develop and demonstrate a centrally managed, wide area wireless distribution grid sensor and faulted circuit indicator system capable of monitoring underground and other hard-to-reach distribution circuits while delivering the reliability, ease of installation, security, battery life and low cost structure required to be a commercially viable product for the electric utility industry. This integrated wireless grid monitoring system enables utilities across the United States to enhance the reliability of their distribution grids, improve performance metrics (i.e., SAIFI, CAIDI, SAIDI), support dynamic load management and predictive maintenance, and enable future remote monitoring applications necessary to achieve the goals of the Smart Grid. This project scope included: conceptual design; trade studies focused on maximizing ease of installation, sensing capabilities, power budget analysis to reduce maintenance costs and time to replace; sensor product development; and field technology demonstration. The trade studies included Radio Frequency (RF) propagation. The RF Trade Study was completed for the 2.4 GHz ISM-band and not extended to 1 GHz band due to availability of suitable radio solutions and associated impacts to overall commercial value of the solution. The technology demonstrations/field trials were performed in partnership with Southern California Edison and San Diego Gas and Electric. The sensing systems included fault indicator and wireless analog sensor devices from Schweitzer Engineering Labs (SEL) and smart transformer monitoring devices from Gridsense. Both SEL and Gridsense worked with ORW during this project to During the demonstration phase, sensors were deployed in multiple locations. Resulting data was analyzed for the following: RF performance, communication systems reliability, sensor system capabilities, and system level analytics relative to the commercial value to the smart grid.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Pajarito Fault System Paleoseismic Trenching Project: Phase 1 Report

The Pajarito fault system (PFS) is a late Quaternary, 50-km-long fault system that bounds the western margin of the Rio Grande rift and crosses the western margin of Los Alamos National Laboratory (LANL) in Los Alamos, NM. As currently interpreted, the PFS is the largest contributing seismic source to ground motion hazard at LANL (Wong et al., 2007). Thus, understanding the fault system’s paleoseismic history is important for characterizing seismic hazard at LANL. The PFS consists of several distinct fault sections, from south to north, the Pajarito fault (PF), Guaje Mountain fault (GMF), Rendija Canyon fault (RCF) and Santa Clara Canyon fault (SCCF) (Wong et al., 2007). In the 2007 seismic source model for the LANL PSHA (Wong et al., 2007), the PFS is interpreted to be a single segmented rupture source. An earthquake recurrence model for the PFS was developed for the PSHA based primarily on the results of previous paleoseismic studies performed on the PF, RCF, and GMF (no detailed paleoseismic studies have been performed on the SCCF). LANL’s 2007 updated probabilistic seismic hazard analysis heavily favored the three Holocene event paleoearthquake model, despite having no single subsurface trenching investigation yield evidence for multiple earthquakes in the Holocene. Sensitivity analyses from the most recent PSHA update (Wong et al., 2007) and subsequent review by the LANL Update Steering Committee (USC, 2013) show that the recurrence of earthquakes within the Holocene epoch (~11,700 years ago to the present) along the PFS is significant to hazard. The USC (2013) recommended additional paleoseismic information be collected on the Pajarito fault section of the PFS to test recurrence models presented by Wong et al. (2007) and Lewis et al. (2009). To address the USC (2013) recommendations, a multi-year paleoseismic investigation of the PFS was conceived consisting of several field phases to evaluate the Holocene earthquake history of the PFS. This report presents the results from the initial Phase 1 paleoseismic investigation of the Pajarito fault. Phase 1 included the excavation and interpretation of six paleoseismic trenches, two each at three separate locations on the Pajarito fault - Sites A, B, and C. Sites B and C were located on the primary trace of the Pajarito fault, and Site A was located on an antithetic trace of the Pajarito fault east of the main fault.

58 GEOSCIENCES↗

Inference of Rock Flow and Mechanical Properties from Injection-Induced Microseismic Events During Geologic CO 2 Storage

Monitoring microseismic activities during CO 2 injection into geologic formations is important for ensuring the safety of the storage operations. The resulting data provide insight into the response of the storage formation to CO 2 injection and can be used to infer the underlying rock flow and mechanical properties. In this paper, assimilation of microseismic data is performed for dynamic characterization of the storage formation by using a stochastic simulation model to forecast the microseismic response of a geologic formation during CO 2 injection. Two modeling approaches are adopted to predict the space-time distribution of the injection-induced microseismicity. The first model is based on pore pressure relaxation assumption, while the second model uses coupled flow and geomechanics simulation to establish the complex physical relation between the storage formation properties and the corresponding microseismic responses during CO 2 injection. The stochastic predictive models in each case are used in ensemble data assimilation frameworks to estimate rock properties from the observed microseismic data. Two data assimilation methods are considered: (i) a new ensemble-based stochastic point process filter (EnPPF) that can directly integrate discrete microseismic events, and (ii) a variant of ensemble smoother, known as the ensemble smoother with multiple data assimilation (ES-MDA), which requires continuous representation of microseismic events for assimilation. The two methods are successfully applied to a geologically realistic model of the Farnsworth Field in Texas, with complex geologic flow units and interacting fault systems.

42 ENGINEERING↗

Co-introduction of precipitate hardening and TRIP in a TWIP high-entropy alloy using friction stir alloying

Tuning deformation mechanisms is imperative to overcome the well-known strength-ductility paradigm. Twinning-induced plasticity (TWIP), transformation-induced plasticity (TRIP) and precipitate hardening have been investigated separately and have been altered to achieve exceptional strength or ductility in several alloy systems. In this study, we use a novel solid-state alloying method—friction stir alloying (FSA)—to tune the microstructure, and a composition of a TWIP high-entropy alloy by adding Ti, and thus activating site-specific deformation mechanisms that occur concomitantly in a single alloy. During the FSA process, grains of the as-cast face-centered cubic matrix were refined by high-temperature severe plastic deformation and, subsequently, a new alloy composition was obtained by dissolving Ti into the matrix. After annealing the FSA specimen at 900 °C, hard Ni–Ti rich precipitates formed to strengthen the alloy. An additional result was a Ni-depleted region in the vicinity of newly-formed precipitates. The reduction in Ni locally reduced the stacking fault energy, thus inducing TRIP-based deformation while the remaining matrix still deformed as a result of TWIP. Our current approach presents a novel microstructural architecture to design alloys, an approach that combines and optimizes local compositions such that multiple deformation mechanisms can be activated to enhance engineering properties.

36 MATERIALS SCIENCE↗

Refinements to the Graves–Pitarka Kinematic Rupture Generator, Including a Dynamically Consistent Slip-Rate Function, Applied to the 2019 Mw 7.1 Ridgecrest Earthquake

The main objective of this study is to develop physics–based constraints on the spatiotemporal variation of the slip–rate function using a simplified dynamic rupture model. First, we performed dynamic rupture modeling of the 2019 M w 7.1 Ridgecrest, California, earthquake, to analyze the effects of depth–dependent stress and material friction on slip rate. Then, we used our modeling results to guide refinements to the slip–rate function that were implemented in the Graves–Pitarka kinematic rupture generation technique. The dynamic ruptures were computed on a surface–rupturing, planar strike–slip fault that includes a weak (negative to low–stress–drop) zone in the upper 4 km of the crust. Below the weak zone, we placed high–stress–drop patches designed to mirror the large–slip areas seen in various rupture model inversions of the event. The locations of the high–stress–drop patches and the hypocenter were varied in multiple realizations to investigate how changing the dynamic conditions affected the resulting rupture kinematics, in particular, the slip rate. From these simulations, we observed a systematic change in the shape of the slip–rate function from Kostrov type below the weak zone to a predominantly symmetric shape within the weak zone, along with a depth–dependent reduction of peak slip rate. We generalized these shallow rupture features into a depth–dependent parametric variation of the slip–rate function and implemented it in the Graves–Pitarka kinematic rupture model generator. The performance of the updated kinematic approach was then verified in 0–4 Hz simulations of the M w 7.1 Ridgecrest earthquake, which showed that incorporating the depth–dependent variation in the shape of the slip–rate function improves the fit to the observed near–fault ground motions in the 0.5–3 s period range.

58 GEOSCIENCES↗

WinGridder-A graphic grid generator for TOUGH2 simulators (WinGridder) v3.0

WINGRIDDER V3.0 is a Windows-based software for designing and generating numerical grids for numerical simulators that are based on the "integral finite difference" or the "control volume" numerical scheme (e.g., TOUGH2, Pruess et al., 1996). The user can design and generate grid that properly represents the stratigraphic features, inclined faults, and repository. WINGRIDDER V3.0 is an upgrade from WINGRIDDER V2.0. This revision includes testable requirements as listed in the Requirements Document (RD), 10024-RD-3.0-00, Section 2. With new features, WINGRIDDER V3.0 adds the ability to generate a multiple-interactive-continuum (MINC) grid.

Pan, Lehua↗

Development and Application of Preliminary TOGA Model for CO 2 -EOR with Comparison to Resistivity Data

A new TOUGH code, TOGA (Transport of Oil, Gas, Aqueous), is used to model enhanced oil recovery (EOR) from a South Texas field where a combination of water, CO 2 , and WAG (water-alternating-gas) injection wells are located in the down-dip region of a fault block, with oil and natural gas production occurring from wells located up-dip. The reservoir is composed of interlayered sands and shales at a depth of about 2000 m. TOGA considers three fluid phases (oil, gas, and aqueous), and multiple components. Oil field data including compositional analysis of stock-tank oil, gas-oil ratio, and gas gravity are used to determine the composition of oil and gas phases. Initial conditions for aqueous saturation are determined from a depth to surface resistivity survey conducted prior to the onset of CO 2 injection and Archie’s Law. Simulation results after several years of EOR operations are then converted back to resistivity maps and compared to images created by time-lapse depth-to-surface resistivity surveys. These surveys show a strong increase in resistivity, interpreted as the replacement of aqueous phase by injected CO 2 . In contrast, preliminary TOGA results show that injected CO 2 displaced more oil than water, suggesting that the three-phase relative permeability curves used to describe the interference of fluid phases need to be modified. Limited information on the composition of produced fluids provides another data set for comparison with model results. Model variations including using different relative permeability curve parameters and WAG cycle durations yielded improved model matches to the field data. The practical simplifications needed to simulate an actual operating oil field and the limited amount of field operation data available preclude using the present model to get an accurate history match or to make detailed predictions. Rather, the modeling is intended to illustrate the general trends occurring during CO 2 -EOR and to indicate where more detailed information is needed.

02 PETROLEUM↗

Astor Pass Seismic Surveys Preliminary Report

In collaboration with the Pyramid Lake Paiute Tribe (PLPT), the University of Nevada, Reno (UNR) and Optim re-processed, or collected and processed, over 24 miles of 2d seismic-reflection data near the northwest corner of Pyramid Lake, Nevada. The network of 2d land surveys achieved a near-3d density at the Astor Pass geothermal prospect that the PLPT drilled during Nov. 2010 to Feb. 2011. The Bureau of Indian Affairs funded additional seismic work around the Lake, and an extensive, detailed single-channel marine survey producing more than 300 miles of section, imaging more than 120 ft below the Lake bottom. Optim’s land data collection utilized multiple heavy vibrators and recorded over 200 channels live, providing a state-of-the-art reflection-refraction data set. After advanced seismic analysis including first-arrival velocity optimization and prestack depth migration, the 2d sections show clear fault-plane reflections, in some areas as deep as 4000 ft, tying to distinct terminations of the mostly volcanic stratigraphy. Some lines achieved velocity control to 3000 ft depth; all lines show reflections and terminations to 5000 ft depth. Three separate sets of normal faults appear in an initial interpretation of fault reflections and stratigraphic terminations, after loading the data into the OpendTect 3d seismic visualization system. Each preliminary fault set includes a continuous trace more than 3000 ft long, and a swarm of short fault strands. The three preliminary normal-fault sets strike northerly with westward dip, northwesterly with northeast dip, and easterly with north dip. An intersection of all three fault systems documented in the seismic sections at the end of Phase I helped to locate the APS-2 and APS-3 slimholes. The seismic sections do not show the faults connected to the Astor Pass tufa spire, suggesting that we have imaged mostly Tertiary-aged faults. We hypothesize that the Recent, active faults that produced the tufa through hotspring activity do not have enough offset to produce seismic terminations. We are conducting further high-resolution seismic studies (to 200 ft depths) at the tufa spire to test this hypothesis. Additional work in progress includes a collaborative, iterative joint interpretation of geologic mapping and the seismic sections for fault locations, building the geologic model; and 3d velocity modeling and imaging to locate additional faultplane images appearing between the 2d lines. Overall, the seismic exploration program cost less than $0.5M from all funders. It defines in detail the geologic structure of much of the north margin of Pyramid Lake.

01 COAL, LIGNITE, AND PEAT↗

Hydrogen and water interactions with CrMnFeCoNi alloy from density functional theory calculations

High entropy alloys (HEAs) are a promising class of materials with remarkable mechanical and catalytic properties. Among these, the quinary CrMnFeCoNi alloy (also called “Cantor alloy”) has attracted considerable attention given its thermodynamic stability and remarkable mechanical properties under different temperatures. Given that various degradation mechanisms involve multiple contaminants, such as hydrogen and water in hydrogen embrittlement and surface poisoning, respectively, understanding their interactions with the Cantor alloy is critical for its practical applications as structural, nuclear, or hydrogen storage material. In this work, we perform first-principles calculations based on Density Functional Theory (DFT) to investigate such interactions when considering various microstructures, including bulk materials and those containing certain defects, such as grain boundaries, stacking faults, and vacancies. We also employ Global Sensitivity Analysis to identify the importance of different factors in the stability of the impurities. We find that the accuracy of the H formation energy is significantly affected by spin polarization and chemical short-range order. The study also identifies a strong tendency for hydrogen interstitials to segregate to Σ5(210)/[001] symmetric tilt grain boundary, even when H concentrations are high, suggesting that a certain type of grain boundaries acts as H sinks within the alloy. Further, this result is reinforced by the low formation energy of vacancy-hydrogen complexes, which can contain multiple hydrogen atoms. Finally, the surface reactivity analysis reveals that the adsorption energy of oxygen and hydroxyl groups is highly sensitive to the specific metal atom involved in the binding, with a clear preference for chromium atoms, which could have implications for the alloy’s oxidation and corrosion behavior.

36 MATERIALS SCIENCE↗

Fidelity of an encoded [7,1,3] logical zero

I calculate the fidelity of a [7,1,3] Calderbank-Shor-Steane quantum error correction code logical zero state constructed in a nonequiprobable Pauli operator error environment for two methods of encoding. The first method is to apply fault-tolerant error correction to an arbitrary state of seven qubits utilizing Shor states for syndrome measurement. The Shor states are themselves constructed in the nonequiprobable Pauli operator error environment, and their fidelity depends on the number of verifications done to ensure multiple errors will not propagate into the encoded quantum information. Surprisingly, performing these verifications may lower the fidelity of the constructed Shor states. The second encoding method is to simply implement the [7,1,3] encoding gate sequence also in the nonequiprobable Pauli operator error environment. Perfect error correction is applied after both methods to determine the correctability of the implemented errors. I find that which method attains higher fidelity depends on which of the Pauli operators errors is dominant. Nevertheless, perfect error correction applied after the encoding suppresses errors to at least first order for both methods.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Benchmark study of a new simplified DFN model for shearing of intersecting fractures and faults

It is challenging to quantitatively predict shearing of intersecting fractures/faults because of dynamic frictional contacts accompanied by possible nonlinear rock deformation. To address such challenges, a new conceptual model—the simplified DFN model—was proposed and validated by Hu et al. 46 to use major paths (MPs) to represent complicated DFNs for calculation of shearing. In this work, we conducted a benchmark study for three examples that involve different levels of complexity of intersecting fractures, and correspondingly different numbers of MPs. The codes and software that were used in the benchmark cover a range of continuum, discontinuum and hybrid numerical methods: NMM (LBNL), FLAC3D (LBNL), GBDEM (KIGAM), FRACOD (DynaFrax), and CASRock (CAS). The general consistency between DFN and MP cases as predicted by all the codes/software demonstrates that major paths can be used to simplify the geometry of DFNs in a wide range of software. Disagreement in results made by some software and potential future improvements are discussed. We show that (1) shearing of one or multiple major fractures can be reduced if there are multiple smaller intersecting fractures in that area, which is a useful basis for understanding and controlling induced seismicity and merits further analysis, and (2) the agreement achieved in the benchmark examples provide confidence that the simplified DFN model is a promising conceptual model that can be used for different types of numerical approaches and software for simplifying the analysis of the shearing of intersecting fractures and faults.

58 GEOSCIENCES↗

Creating dynamic equivalent PV circuit models with impedance spectroscopy for arc-fault modeling.

Article 690.11 in the 2011 National Electrical Code{reg_sign} (NEC{reg_sign}) requires new photovoltaic (PV) systems on or penetrating a building to include a listed arc fault protection device. Currently there is little experimental or empirical research into the behavior of the arcing frequencies through PV components despite the potential for modules and other PV components to filter or attenuate arcing signatures that could render the arc detector ineffective. To model AC arcing signal propagation along PV strings, the well-studied DC diode models were found to inadequately capture the behavior of high frequency arcing signals. Instead dynamic equivalent circuit models of PV modules were required to describe the impedance for alternating currents in modules. The nonlinearities present in PV cells resulting from irradiance, temperature, frequency, and bias voltage variations make modeling these systems challenging. Linearized dynamic equivalent circuits were created for multiple PV module manufacturers and module technologies. The equivalent resistances and capacitances for the modules were determined using impedance spectroscopy with no bias voltage and no irradiance. The equivalent circuit model was employed to evaluate modules having irradiance conditions that could not be measured directly with the instrumentation. Although there was a wide range of circuit component values, the complex impedance model does not predict filtering of arc fault frequencies in PV strings for any irradiance level. Experimental results with no irradiance agree with the model and show nearly no attenuation for 1 Hz to 100 kHz input frequencies.

99 GENERAL AND MISCELLANEOUS↗

Efficient Floating-Point Arithmetic on Fault-Tolerant Quantum Computers

We propose a novel floating-point encoding scheme that builds on prior work involving fixed-point encodings. We encode floating-point numbers using Two's Complement fixed-point mantissas and Two's Complement integral exponents. We used our proposed approach to develop quantum algorithms for fundamental arithmetic operations, such as bit-shifting, reciprocation, multiplication, and addition. We prototyped and investigated the performance of the floating-point encoding scheme on quantum computer simulations by performing reciprocation on randomly drawn inputs and by solving first-order ordinary differential equations, while varying the number of qubits in the encoding. We observed rapid convergence to the exact solutions as we increased the number of qubits and a significant reduction in the number of ancilla qubits required for reciprocation when compared with similar approaches.

Serrallés, José Cruz [Weill Cornell Med. Coll.]↗

Investigation into Spectral Parameters as they Impact CPV Module Performance

The CPV industry is well aware that performance of triple junction cells depends on spectral conditions but there is a lack of data quantifying this spectral dependence at the module level. This paper explores the impact of precipitable water vapor, aerosol optical depth (AOD), and optical air mass on multiple CPV module technologies on-sun in Golden, CO.

14 SOLAR ENERGY↗

Shallow (2-meter) Temperature Surveys in Colorado

Shallow temperature surveys are useful in early-stage geothermal exploration to delineate surface outflow zones, with the intent to identify the source of upwelling, usually a fault. Detailed descriptions of the 2-meter survey method and equipment design can be found in Coolbaugh et al. (2007) and Sladek et al. (2007), and are summarized here. The survey method was devised to measure temperature as far below the zone of solar influence as possible, have minimal equilibration time, and yet be portable enough to fit on the back of an all-terrain vehicle (ATV); Figure 2). This method utilizes a direct push technology (DPT) technique where 2.3 m long, 0.54" outer diameter hollow steel rods are pounded into the ground using a demolition hammer. Resistance temperature devices (RTD) are then inserted into the rods at 2-meter depths, and allowed to equilibrate for one hour. The temperatures are then measured and recorded, the rods pulled out of the ground, and re-used at future sites. Usually multiple rods are planted over the course of an hour, and then the sampler returns back to the first station, measures the temperatures, pulls the rods, and so on, to eliminate waiting time. At Wagon Wheel Gap, 32 rods were planted around the hot springs between June 20 and July 1, 2012. The purpose was to determine the direction of a possible upflow fault or other structure. Temperatures at 1.5m and 2m depths were measured and recorded in the attribute table of this point shapefile. Several anomalous temperatures suggest that outflow is coming from a ~N60W striking fault or shear zone that contains the quartz-fluorite-barite veins of the adjacent patented mining claims. It should be noted that temperatures at 2m depth vary according to the amount of solar heating from above, as well as possible geothermal heating from below.

15 GEOTHERMAL ENERGY↗