Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “multiple components”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Introduction to: Atlantic Meridional Overturning Circulation(AMOC)

A striking conclusion of the Intergovernmental Panel on Climate Change 2007 report is the crucial role that the Atlantic Meridional Overturning Circulation (AMOC) may play in anthropogenic climate change. However, these IPCC coupled climate simulations show a broad range of uncertainty in the magnitude and timing of AMOC transport change ranging from none to nearly complete collapse within the 21st century. The potential consequences of large changes in the characteristics of AMOC have motivated the creation in the United States of an interagency program and implementation plan to develop monitoring and prediction capabilities for the AMOC This program parallels the development of substantial monitoring efforts by European, South American and African countries -- notably the UK Rapid and Rapid-Watch programs. The papers contained in this volume are derived from presentations at the First U.S. Atlantic Meridional Overturning Circulation (AMOC) Meeting held 4 - 6 May, 2009 to review the US implementation plan and its coordination with other monitoring activities. The Atlantic Meridional Overturning Circulation consists of multiple components illustrated in an attached figure. Water enters the South Atlantic at upper and intermediate depths through both western and eastern routes (where eddy transport is especially important) and is transported northward across the equator, where it recirculates within the northern subtropical and subpolar gyres. The northern end is defined by the sinking regions of the Nordic Seas and the Labrador Sea where the waters that eventually form the upper and lower branches of North Atlantic Deep Water are conditioned. High surface salinities, the result of high net evaporation in the tropics and subtropics (including the Mediterranean Sea), and presence of regions of the Arctic Ocean that remain ice-free even in winter allow for the rapid cooling and thus densification of surface water. This dense surface water becomes the source of deep water formation in the sinking regions. In addition to transporting mass, the AMOC transports roughly half of the total amount of heat carried northward through the northern subtropics (down the temperature-gradient) by the ocean. In contrast in the Southern Hemisphere AMOC transports heat up-gradient from the cool Circumpolar Current to the warm tropics. Paleoevidence suggests that AMOC heat transport in the two hemispheres has varied over time in ways intimately tied to millennial changes in the Earth's climate. In one example, the abrupt Younger Dryas spell of cold weather over the North Atlantic, which began 13,000 years ago, has generally been linked to a millennial shutdown of the AMOC as a result of massive freshwater discharge from the North American continent. The current AMOC monitoring array consists of a series of instrumented transects located across key passages (see Cunningham et al., 2010 for a recent review). In the Arctic and sub-Arctic, transects cross Fram Strait, Denmark Strait and the Faroe Channel (connecting Greenland, Iceland, and the United Kingdom), as well as the entrance to the Labrador Sea. Further south and extending outwards from the east coast of North America there are a series of monitoring arrays including arrays of the Canadian Atlantic Zone Monitoring Program, deployments of the Rapid Western Atlantic Variability Experiment (WAVE), Line W at 39 N, as well as the Rapid-MOC moored array. The latter spans the entire Atlantic basin along 26.5 N. At tropical latitudes we have the Meridional Overturning Variability Experiment (MOVE) array at 16 N, while in the Southern Hemisphere a corresponding basin-spanning transect is being established at the latitude of Cape of Good Hope, complemented by arrays at Drake Passage.

Hakkinen, Sirpa↗

Pulsars Magnetospheres

Current density determines the plasma flow regime. Cascades are non-stationary. ALWAYS. All flow regimes look different: multiple components (?) Return current regions should have particle accelerating zones in the outer magnetosphere: y-ray pulsars (?) Plasma oscillations in discharges: direct radio emission (?)

Timokhin, Andrey↗

Enhancement of the Earth Science and Remote Sensing Group's Website and Related Projects

The major problem addressed throughout the term was the need to update the group's current website, as it was outdated and required streamlining and modernization. The old Gateway to Astronaut Photography of the Earth website had multiple components, many of which involved searches through expansive databases. The amount of work required to update the website was large and due to a desired release date, assistance was needed to help build new pages and to transfer old information. Additionally, one of the tools listed on the website called Image Detective had been underutilized in the past. It was important to address why the public was not using the tool and how it could potentially become more of a resource for the team. In order to help with updating the website, it was necessary to first learn HTML. After assisting with small edits, I began creating new pages. I utilized the "view page source" and "developer" tools in the internet browser to observe how other websites created their features and to test changes without editing the code. I then edited the code to create an interactive feature on the new page. For the Image Detective Page I began an evaluation of the current page. I also asked my fellow interns and friends at my University to offer their input. I took all of the opinions into account and wrote up a document regarding my recommendations. The recommendations will be considered as I help to improve the Image Detective page for the updated website. In addition to the website, other projects included the need for additional, and updated image collections, along with various project requests. The image collections have been used by educators in the classroom and the impact crater collection was highly requested. The glaciers collection focused mostly on South American glaciers and needed to include more of the earth's many glaciers. The collections had not been updated or created due to the fact that related imagery had not been catalogued. The process of cataloging involves identifying the center point location of the image and feature identification. Other project needs included collecting night images of India in for publishing. Again, many of the images were not catalogued and the database was lacking in night time imagery for that region. The last project was to calculate the size of mega fans in South Africa. Calculating the fan sizes involved several steps. To expedite the study, calculations needed to be made after the base maps had been created. Using data files that included an outline of the mega fans on a topographic map, I opened the file in Photoshop, determined the number of pixels within the outlined area, created a one degree squared box, determined the pixels within the box, converted the pixels within the box to kilometers, and then calculated the fan size using this information. Overall, the internship has been a learning experience for me. I have learned how to use new programs and I developed new skills. These These skills can help me as I enter into the next phase of my career. Learning Photoshop and HTML in addition to coding in Dreamweaver are highly sought after skills that are used in a variety of fields. Additionally, the exposure to different aspects of the team and working with different people helped me to gain a broader set of skills and allowed me to work with people with different experiences. The various projects I have worked on this summer have directly benefitted the team whether it was completing projects they did not have the time to do, or by helping the team reach deadlines sooner. The new website will be the best place to see all of my work as it will include the newly designed pages and will feature my updates to collections.

Coffin, Ashley↗

PROcess Based Diagnostics PROBE

Many of the aspects of the climate system that are of the greatest interest (e.g., the sensitivity of the system to external forcings) are emergent properties that arise via the complex interplay between disparate processes. This is also true for climate models most diagnostics are not a function of an isolated portion of source code, but rather are affected by multiple components and procedures. Thus any model-observation mismatch is hard to attribute to any specific piece of code or imperfection in a specific model assumption. An alternative approach is to identify diagnostics that are more closely tied to specific processes -- implying that if a mismatch is found, it should be much easier to identify and address specific algorithmic choices that will improve the simulation. However, this approach requires looking at model output and observational data in a more sophisticated way than the more traditional production of monthly or annual mean quantities. The data must instead be filtered in time and space for examples of the specific process being targeted.We are developing a data analysis environment called PROcess-Based Explorer (PROBE) that seeks to enable efficient and systematic computation of process-based diagnostics on very large sets of data. In this environment, investigators can define arbitrarily complex filters and then seamlessly perform computations in parallel on the filtered output from their model. The same analysis can be performed on additional related data sets (e.g., reanalyses) thereby enabling routine comparisons between model and observational data. PROBE also incorporates workflow technology to automatically update computed diagnostics for subsequent executions of a model. In this presentation, we will discuss the design and current status of PROBE as well as share results from some preliminary use cases.

PROBE↗

Brachinite-Like Clast in the Kaidun Meteorite: First Report of Primitive Achondrite Material

Kaidun is a brecciated meteorite containing many different types of meteorites. It is composed of carbonaceous, enstatite, ordinary and R chondrites with smaller amounts of basaltic achondrites, impact melt products and unknown [1, 2]. Because of the multiple components and high abundance of carbonaceous chondrites, the Kaidun parent body was probably a large C-type asteroid in order to have accumulated clasts of many unrelated asteroids, and thus Kaidun contains previously unknown materials[1]. It has been suggested that the Kaidun parent body trawled through different regions of the solar system [3], but the formation of Kaidun meteorite is still uncertain. In this abstract, we report the first discovery of a brachinite-like clast in Kaidun.

Higashi, K.↗

Quasi-Periodic Fluctuations and Chromospheric Evaporation in a Solar Flare Ribbon Observed by Hinode/EIS, IRIS, and RHESSI

The Hinode/Extreme-ultraviolet Imaging Spectrometer (EIS) obtained rapid cadence (11.2 s) EUV stare spectra of an M7.3 flare ribbon in AR 12036 on 2014 April 18. Quasi-periodic (P approx. = 75.6 +/- 9.2 s) intensity fluctuations occurred in emission lines of O IV, Mg VI, Mg VII, Si VII, Fe XIV, and Fe XVI during the flare's impulsive rise, and ended when the maximum intensity in Fe XXIII was reached. The profiles of the O IV- Fe XVI lines reveal that they were all redshifted during most of the interval of quasi-periodic intensity fluctuations, while the Fe XXIII profile revealed multiple components including one or two highly blueshifted ones. This indicates that the flare underwent explosive chromospheric evaporation during its impulsive rise. Fluctuations in the relative Doppler velocities were seen, but their amplitudes were too subtle to extract significant quasi-periodicities. RHESSI detected 25-100 keV hard-X-ray sources in the ribbon near the EIS slit's pointing position during the peaks in the EIS intensity fluctuations. The observations are consistent with a series of energy injections into the chromosphere by nonthermal particle beams. Electron densities derived with Fe XIV (4.6 x 10(exp 10) per cu cm) and Mg VII (7.8 x 10(exp 9) per cu cm) average line intensity ratios during the interval of quasi-periodic intensity fluctuations, combined with the radiative loss function of an optically thin plasma, yield radiative cooling times of 32 s at 2.0 x 10(exp 6) K, and 46 s at 6.3 x 10(exp 5) K (about half the quasi-period); assuming Fe XIV's density for Fe XXIII yields a radiative cooling time of 10(exp 3) s (13 times the quasi-period) at 1.4 x 10(exp 7) K.

Brosius, Jeffrey W.↗

Status and Plans for Reanalysis at NASA/GMAO

Reanalysis plays a critical role in GMAOs goal to enhance NASA's program of Earth observations, providing vital data sets for climate research and the development of future missions. As the breadth of NASAs observations expands to include multiple components of the Earth system, so does the need to assimilate observations from currently uncoupled components of the system in a more physically consistent manner. GMAOs most recent reanalysis of the satellite era, MERRA-2, has completed the period 1980-present, and is now running as a continuing global climate analysis with two- to three-week latency. MERRA-2 assimilates meteorological and aerosol observations as a weakly coupled assimilation system as a first step toward GMAOs longer term goal of developing an integrated Earth system analysis (IESA) capability that will couple assimilation systems for the atmosphere, ocean, land and chemistry. The GMAO strategy is to progress incrementally toward an IESA through an evolving combination of coupled systems and offline component reanalyses driven by, for example, MERRA-2 atmospheric forcing. Most recently, the GMAO has implemented a weakly coupled assimilation scheme for analyzing ocean skin temperature within the existing atmospheric analysis. The scheme uses background fields from a near-surface ocean diurnal layer model to assimilate surface-sensitive radiances plus in-situ observations along with all other observations in the atmospheric assimilation system. In addition, MERRA-2-driven simulations of the ocean (plus sea ice) and atmospheric chemistry (for the EOS period) are currently underway, as is the development of a coupled atmosphere-ocean assimilation system. This talk will describe the status of these ongoing efforts and the planned steps toward an IESA capability for climate research.

MERRA-2↗

In-Situ Diagnostic for Assessing Hall Thruster Wear

The design of a new diagnostic to measure the net erosion of Hall thruster surfaces is presented. This diagnostic consists of a pair of optical non-contact profilometer pens mounted to a set of motion stages, which can interrogate the surface features of multiple components of interest including the hollow cathode assembly, magnet front pole covers, and discharge channel. By comparing scans of these surfaces to reference features, estimates of the component erosion rates can be acquired throughout long-duration lifetime tests without venting and removing the thruster from the vacuum facility for external profilometry. This work presents a detailed overview of the diagnostic design including the precision positioning system. In addition, preliminary data are shown which verify diagnostic operation and establish a baseline that will be used to track the erosion of the Hall Effect Rocket with Magnetic Shielding (HERMeS) Technology Demonstration Unit 3 (TDU-3) during an ongoing long-duration wear test.

Ahern, Drew M.↗

In-situ Diagnostic for Assessing Hall Thruster Wear

The design of a new diagnostic to measure the net erosion of Hall thruster surfaces is presented. This diagnostic consists of a pair of optical noncontact profilometer pens mounted to a set of motion stages, which can interrogate the surface features of multiple components of interest including the hollow cathode assembly, magnet front pole covers, and discharge channel. By comparing scans of these surfaces to reference features, estimates of the component erosion rates can be acquired throughout long-duration lifetime tests without venting and removing the thruster from the vacuum facility for external profilometry. This work presents a detailed overview of the diagnostic design including the precision positioning system. In addition, preliminary data are shown which verify diagnostic operation and establish a baseline that will be used to track the erosion of the Hall Effect Rocket with Magnetic Shielding (HERMeS) Technology Demonstration Unit 3 (TDU-3) during an ongoing long-duration wear test.

Ahern, Drew M.↗

In-Situ Diagnostic for Assessing Hall Thruster Wear

The design of a new diagnostic to measure the net erosion of Hall thruster surfaces is presented. This diagnostic consists of a pair of optical non-contact profilometer pens mounted to a set of motion stages, which can interrogate the surface features of multiple components of interest including the hollow cathode assembly, magnet front pole covers, and discharge channel. By comparing scans of these surfaces to reference features, estimates of the component erosion rates can be acquired throughout long-duration lifetime tests without venting and removing the thruster from the vacuum facility for external profilometry. This work presents a detailed overview of the diagnostic design including the precision positioning system. In addition, preliminary data are shown which verify diagnostic operation and establish a baseline that will be used to track the erosion of the Hall Effect Rocket with Magnetic Shielding (HERMeS) Technology Demonstration Unit 3 (TDU-3) during an ongoing long-duration wear test.

Ahern, Drew M.↗

Fluid System Stability Analysis Techniques

Fluid systems, or networks, consist of multiple components that work together to achieve some desired thermofluid state. For any generic application, this fluid state can be a combination of the fluid pressure, flow rate, enthalpy, or species concentration. Fluid system components, such as pumps and valves, are often governed by nonlinear differential equations, resulting in complex component-to-component interactions. System-level fluid network stability occurs when the flow through the system can maintain a steady-state solution in the presence of small perturbations, which depends on these component interactions. System instability, however, can go undetected until issues arise during integrated system testing. This presentation explores a method for system designers to think of the fluid network as an assembly of components, each with their own thermofluid surfaces of partial stability, called nullclines. The intersections of all nullclines yields system-level solutions, called equilibrium points. When designers define operating points, they are tuning system parameters so that these equilibrium points move to the desired location in the thermofluid state plane. However, linearization theory shows us that the dynamic behavior around these points can be unstable. The local stability of these equilibrium points can be assessed analytically with eigen-analysis, or numerically by propagating state-plane samples to construct a phase portrait. Investigating a phase portrait can help designers gain a qualitative understanding of a system’s dynamic performance. This understanding can then help inform requirement definitions, component selection, and operational procedures. This presentation includes an example of the phase portrait technique on a system featuring a centrifugal pump and a back-pressure regulator (BPR). Numerical modeling of this system suggests that equilibrium points on the left-hand side of the pump curve are dynamically unstable.

Fluid System↗

Fluid System Stability Analysis Techniques

Fluid systems, or networks, consist of multiple components that work together to achieve some desired thermofluid state. For any generic application, this fluid state can be a combination of the fluid pressure, flow rate, enthalpy, or species concentration. Fluid system components, such as pumps and valves, are often governed by nonlinear differential equations, resulting in complex component-to-component interactions. System-level fluid network stability occurs when the flow through the system can maintain a steady-state solution in the presence of small perturbations, which depends on these component interactions. System instability, however, can go undetected until issues arise during integrated system testing. This presentation explores a method for system designers to think of the fluid network as an assembly of components, each with their own thermofluid surfaces of partial stability, called nullclines. The intersections of all nullclines yields system-level solutions, called equilibrium points. When designers define operating points, they are tuning system parameters so that these equilibrium points move to the desired location in the thermofluid state plane. However, linearization theory shows us that the dynamic behavior around these points can be unstable. The local stability of these equilibrium points can be assessed analytically with eigen-analysis, or numerically by propagating state-plane samples to construct a phase portrait. Investigating a phase portrait can help designers gain a qualitative understanding of a system’s dynamic performance. This understanding can then help inform requirement definitions, component selection, and operational procedures. This presentation includes an example of the phase portrait technique on a system featuring a centrifugal pump and a back-pressure regulator (BPR). Numerical modeling of this system suggests that equilibrium points on the left-hand side of the pump curve are dynamically unstable.

Fluid System↗

Discovery and Timing of Three Millisecond Pulsars in Radio and Gamma-Rays with the Giant Metrewave Radio Telescope and Fermi Large Area Telescope

We performed deep observations to search for radio pulsations in the directions of 375 unassociated Fermi Large Area Telescope γ-ray sources using the Giant Metrewave Radio Telescope (GMRT) at 322 and 607 MHz. In this paper we report the discovery of three millisecond pulsars (MSPs), PSR J0248+4230, PSR J1207–5050, and PSR J1536–4948. We conducted follow-up timing observations for ∼5 yr with the GMRT and derived phase-coherent timing models for these MSPs. PSR J0248+4230 and J1207–5050 are isolated MSPs having periodicities of 2.60 ms and 4.84 ms. PSR J1536–4948 is a 3.07 ms pulsar in a binary system with an orbital period of ∼62 days about a companion of a minimum mass of 0.32 M⊙. We also present multifrequency pulse profiles of these MSPs from the GMRT observations. PSR J1536–4948 is an MSP with an extremely wide pulse profile having multiple components. Using the radio timing ephemeris we subsequently detected γ-ray pulsations from these three MSPs, confirming them as the sources powering the γ-ray emission. For PSR J1536–4948 we performed combined radio–γ-ray timing using ∼11.6 yr of γ-ray pulse times of arrival (TOAs) along with the radio TOAs. PSR J1536–4948 also shows evidence for pulsed γ-ray emission out to above 25 GeV, confirming earlier associations of this MSP with a ≥10 GeV point source. The multiwavelength pulse profiles of all three MSPs offer challenges to models of radio and γ-ray emission in pulsar magnetospheres.

High energy astrophysics↗

Windform® XT 2.0 Use as 3U CubeSat Primary Structure

CubeSats provide a platform for small-scale space research and technology demonstration at reduced complexity, cost, and development time. These advantages drove the NASA Langley Research Center (LaRC) to develop and launch the GPX2 3U CubeSat to explore the viability of using Commercial Off-The-Shelf (COTS) differential GPS (dGPS) in low earth orbit. To reduce manufacturing costs and increase design flexibility, the project chose additive manufactured Windform® XT 2.0 as the primary bus material rather than traditional subtractive manufactured (milled) metal. The bus is a two-part, Selective Laser Sintered, 3D-print structure consisting of a single-piece, five-walled chassis and single-walled cover. The bus was specially designed to allow the project to accommodate the payload electronics stack as well as antennas, receivers, and deployable mechanisms. By using an additive manufactured solution, LaRC was able to design in features unrealizable through traditional milling, with a lead-time of roughly two weeks. In comparison, traditional subtractive manufacturing limits geometry options due to toolpath reach and bus construction would have required multiple components for each wall. This would have resulted in a more costly, longer lead-time article with more joints, fasteners, and complexity with a commensurate increase in overall mass. A number of lessons-learned were captured during the design, analysis, and testing of the GPX2 CubeSat covering thermal and structural analysis, vibration modeling, and geometric tolerancing. Additionally, a variety of material testing and verification were performed before and during spacecraft design and integration to assure the suitability of Windform® XT 2.0 for the launch and mission environments. This article provides the highlights of designing and testing the GPX2 bus.

CubeSat↗

Use NASA Earthdata in the Cloud

With the impending arrival of new, high-data-volume Earth observation missions, NASA’s ability to effectively ingest, process, and archive large amounts of data requires the most cost-effective, flexible, and scalable data-management architectures and technologies. To meet these demands, NASA's Earth Science Data Systems (ESDS) Program is implementing a strategic vision to develop and operate multiple components of NASA's Earth Observing System Data and Information System (EOSDIS) in a commercial cloud environment. As more earth observing data is moved into the cloud, NASA EOSDIS wants to share our reasoning for moving data into the commercial cloud, as well as demonstrate how end-users can take advantage of both data in the cloud and cloud-deployed services. This presentation explains the enterprise reasons for moving data into the cloud, specifically the scalability of cloud systems, the flexibility to pivot to the most optimal language/system/architecture, and the reduced redundancy of a common architecture. Then we primarily focus on the user-driven reasons for moving to the cloud. Equal access to high performance computing helps all parties, especially users that don't have access to their own on-premise computing infrastructure. Rapid deployment allows users to spin up their own systems without needing the extensive platform previously required for large scale development. Cost effectiveness allows users a wide breadth of computing options, from super computer ability to small scale development, which can help underserved communities. Finally we link to internal resources that users can utilize to begin their cloud based development journey without having to be an expert in the field.

Nicholas Doty↗

X-57 Flight Systems Integration Path

The foundation for a safe and successful flight test of the National Aeronautics and Space Administration (NASA) X-57 Maxwell all-electric experimental airplane, or any X-Plane, is comprehensive system testing on the ground. This test campaign includes verification and validation (V&V) that the integrated system operates as designed and expected, as well as understanding how the system reacts and responds to failures that can occur during flight by performing failure modes and effects testing (FMET). The aircraft should be in the final flight configuration for these test activities because any modifications, even those that appear insignificant, could affect test outcomes. Although the plan was to perform V&V and FMET testing once the airplane was in the flight configuration, due to multiple component redesigns, concurrent software development, and other problems with on-aircraft testing, the X-57 Maxwell never made it into a full-flight configuration. As a result, a build-up approach was followed to test software and hardware as they became ready in order to continue making progress wherever possible. Using this approach revealed problems with the hardware and software faster than waiting for a full-flight configuration, allowing solutions to be found more quickly and in parallel with other project tasks. Other than unloaded motor testing in a lab setting, the only other test setup was on the airplane itself. On-aircraft testing was preferrable in order to test things as close to a flight configuration as possible but was time consuming due to the requirements for testing on the airplane. To overcome some of the on-aircraft barriers, off-aircraft test configurations, such as the Systems Integration Laboratory (SIL) and hardware-in-the-loop (HIL) setups, were used, but each of these setups had limitations to be considered. As a result, solutions found in the SIL or HIL configurations did not always work as expected on the airplane, resulting in an iterative process between on- and off-aircraft testing to find the final solution. Having a dedicated test platform such as an iron bird that closely represents the aircraft - without flight hardware - would have been the most effective off-aircraft test setup, which could have allowed the project to save time and money and potentially reach flight. This paper will highlight the V&V and FMET considerations and testing prerequisites, the build-up approaches to both software and system testing, the benefits and drawbacks to different test configurations, as well as battery testing and operations.

Kassidy M. Mclaughlin↗

X-57 Flight Systems Integration Path

The foundation for a safe and successful flight test of the National Aeronautics and Space Administration (NASA) X-57 Maxwell all-electric experimental airplane, or any X-Plane, is comprehensive system testing on the ground. This test campaign includes verification and validation (V&V) that the integrated system operates as designed and expected, as well as understanding how the system reacts and responds to failures that can occur during flight by performing failure modes and effects testing (FMET). The aircraft should be in the final flight configuration for these test activities because any modifications, even those that appear insignificant, could affect test outcomes. Although the plan was to perform V&V and FMET testing once the airplane was in the flight configuration, due to multiple component redesigns, concurrent software development, and other problems with on-aircraft testing, the X-57 Maxwell never made it into a full-flight configuration. As a result, a build-up approach was followed to test software and hardware as they became ready in order to continue making progress wherever possible. Using this approach revealed problems with the hardware and software faster than waiting for a full-flight configuration, allowing solutions to be found more quickly and in parallel with other project tasks. Other than unloaded motor testing in a lab setting, the only other test setup was on the airplane itself. On-aircraft testing was preferrable in order to test things as close to a flight configuration as possible but was time consuming due to the requirements for testing on the airplane. To overcome some of the on-aircraft barriers, off-aircraft test configurations, such as the Systems Integration Laboratory (SIL) and hardware-in-the-loop (HIL) setups, were used, but each of these setups had limitations to be considered. As a result, solutions found in the SIL or HIL configurations did not always work as expected on the airplane, resulting in an iterative process between on- and off-aircraft testing to find the final solution. Having a dedicated test platform such as an iron bird that closely represents the aircraft - without flight hardware - would have been the most effective off-aircraft test setup, which could have allowed the project to save time and money and potentially reach flight. This paper will highlight the V&V and FMET considerations and testing prerequisites, the build-up approaches to both software and system testing, the benefits and drawbacks to different test configurations, as well as battery testing and operations.

Kassidy McLaughlin↗