Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mooring”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Measurements of electron transport in liquid and gas Xenon using a laser-driven photocathode

Measurements of electron drift properties in liquid and gaseous xenon are reported. The electrons are generated by the photoelectric effect in a semitransparent gold photocathode driven in transmission mode with a pulsed ultraviolet laser. The charges drift and diffuse in a small chamber at various electric fields and a fixed drift distance of 2.0 cm. At an electric field of 0.5 kV/cm, the measured drift velocities and corresponding temperature coefficients respectively are 1.97 ± 0.04 mm/µs and (-0.69 ± 0.05)%/K for liquid xenon, and 1.42 ± 0.03 mm/µs and (+0.11 ± 0.01)%/K for gaseous xenon at 1.5 bar. In addition, we measure longitudinal diffusion coefficients of 25.7±4.6 cm2/s and 149±23 cm2/s, for liquid and gas, respectively. The quantum efficiency of the gold photocathode is studied at the photon energy of 4.73 eV in liquid and gaseous xenon, and vacuum. These charge transport properties and the behavior of photocathodes in a xenon environment are important in designing and calibrating future large scale noble liquid detectors.

Njoya, Oumarou↗
DOE OSTI2020

Development and evaluation of a list mode neutron coincidence collar for spatial response measurements of fresh fuel assemblies

A traditional safeguards neutron coincidence counting system, the Neutron Coincidence Collar, has been modified to incorporate individual preamplifiers on each of its 18 3He tubes in active interrogation mode. When used with list mode data acquisition (LMDA) and analysis, a signal from each 3He tube can be recorded and analyzed to allow a spatial response measurement to be performed on an item based on count rate and 3He tube location within the system. The ultimate goal of this project is to demonstrate the capabilities of a list mode response matrix for the nondestructive assay of fresh nuclear fuel assemblies. To enable partial defect detection of fuel pin locations and absences within an assembly, the project aims to extend well-established correlated neutron analysis techniques on a preexisting Neutron Coincidence Collar by extracting a greater number of useful signatures from the system than are currently generated. LMDA, combined with the addition of multiple preamplifiers, facilitates this capability by increasing the number of simultaneous signals that can be measured; this allows an in-depth analysis of neutron coincidence events to determine a fissioning item’s location based on the measured doubles count rate in various channel logic coincidence combinations. All of this can be done from a single measurement pulse train in offline analysis, which is the major benefit provided by LMDA. Through various stages of development and testing, a Mirion Technologies model JCC-71 Neutron Coincidence Collar has been successfully retrofit with modern electronics designed in-house at Oak Ridge National Laboratory, matching preexisting JAB-01 electronics performance, while maintaining the original system footprint. This paper presents these various stages of development and experimental evaluation of the proof of concept system.

Moore, Angela S.↗
DOE OSTI2020

Iodine Immobilization by Materials through Sorption and Redox-Driven Processes: A Literature Review

Radioiodine-129 (129I) in the subsurface is mobile and limited information is available on treatment technologies. Scientific literature was reviewed to compile information on materials that could potentially be used to immobilize 129I through sorption and redox-driven processes, with an emphasis on ex-situ processes. Candidate materials to immobilize 129I include iron minerals, sulfur-based materials, silver-based materials, bismuth-based materials, ion exchange resins, activated carbon, modified clays, and tailored materials (metal organic frameworks (MOFS), layered double hydroxides (LDHs) and aerogels). Where available, compiled information includes material performance in terms of (i) capacity for 129I uptake; (ii) long-term performance (i.e., solubility of a precipitated phase); (iii) technology maturity; (iv) cost; (v) available quantity; (vi) environmental impact; (vii) ability to emplace the technology for in situ use at the field-scale; and (viii) ex situ treatment (for media extracted from the subsurface or secondary waste streams). Because it can be difficult to compare materials due to differences in experimental conditions applied in the literature, Part II of this review describes results of laboratory studies for selected materials using a standardized batch loading test.

Moore, Robert C.↗
DOE OSTI2022

Frontal Polymerization of Dihydrofuran Comonomer Facilitates Thermoset Deconstruction

Frontal ring-opening metathesis polymerization (FROMP) is a rapid, low-energy manufacturing reaction that is useful for curing thermosetting materials. FROMP of dicyclopentadiene (DCPD) results in poly(dicyclopentadiene) (p(DCPD)), a tough thermoset with excellent mechanical performance and chemical stability. Like most thermosets, p(DCPD) cannot be reprocessed and is therefore difficult to recycle. Previous work demonstrated that the incorporation of a small quantity of cleavable units in the strand segments of p(DCPD) networks enables their deconstruction. Here, we report that a commercially available multifunctional comonomer, 2,3-dihydrofuran (DHF), both acts as a potent Grubbs catalyst inhibitor during FROMP and introduces acid cleavable units. The resulting materials retain high performance characteristics, including glass-transition temperatures ranging from 115 to 165 °C and ultimate strength ranging from 35 to 40 MPa. The addition of DHF above critical loading levels enables deconstructable thermosets. Here, we further demonstrate freeform three-dimensional (3D) printing of deconstructable thermosets via frontal polymerization.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Leveraging Multiproton-Coupled Electron Transfer to Improve Ir(III) Photocatalyst Efficiency

In photoredox reactions, charge recombination (CR) limits quantum yields, hindering the efficient conversion of light energy into catalytic activity. To address this, we drew inspiration from redox relays in photosystem II (PSII) and developed a new series of iridium(III) complexes featuring covalently attached benzimidazole-phenol-pyridine (BIP-Py) groups to facilitate intramolecular multiproton-coupled electron transfer (MPCET). Herein, we evaluate the effects of MPCET through an extended and well-defined hydrogen-bond network to improve photocatalytic activity and mitigate rapid charge recombination. Infrared spectroelectrochemistry reveals pyridine protonation upon phenol oxidation, while visible spectroelectrochemistry and transient absorption spectroscopy confirm the electro- and photochemical formation of chargeseparated states (CSS) involving oxidized BIP, resulting from intramolecular proton-coupled electron transfer (PCET). The application of the BIP-Py platform in a photocatalytic Nhydroxyphthalimide ester reduction reaction resulted in a ∼106-fold reduction in CR rate and a quantum yield enhancement of up to 157%. Our findings suggest that incorporating MPCET-based redox relays into photocatalyst frameworks is an effective strategy to enhance the efficiency of photocatalytic systems.

Catalysts↗
DOE OSTI2022

Scalable Frontal Oligomerization: Insights from Advanced Mass Analysis

Linear oligomers of dicyclopentadiene (DCPD) are reactive precursors for thermoplastic and thermoset materials. Unlike the foul-smelling parent monomer, oligomers composed of DCPD are odorless. With appropriate modification of the end-group or backbone chemistry, telechelic DCPD oligomers have potential utility as cross-linkers and as macromonomer precursors for block and graft copolymers. Most existing methods to produce oligo-DCPD, however, require solvent, are relatively slow, and necessitate air-free techniques. Here we show that frontal ring-opening metathesis oligomerization (FROMO) of neat DCPD and other norbornene derivatives rapidly generates hundreds of grams of material in minutes with catalyst loadings of 0.5 mM. This energy-efficient catalytic process utilizes the heat generated by the reaction to self-propagate oligomerization throughout the liquid monomer. FROMO employs a terminal olefin (e.g., styrene) in which a cross-metathesis reaction (i.e., chain transfer) competes with ring-opening metathesis (i.e., propagation). Kendrick mass analysis enables rapid identification and assignment of all the chain-end types present and quantifies the degree of branching resulting from the infrequent cyclopentene ring-opening reaction. This analytical technique also detects oligomer species derived from trace impurities in the monomer or chain-transfer agent that are otherwise difficult to observe with other characterization methods. Here, the obtained oligomers possess well-defined chain-ends and molecular weight distributions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

M IV /Co –I (M = Zr, Hf) Bis(phosphinoamide) Complexes with η 6 - and η 4 -Arenes

Despite their relevance to catalysis, low-/subvalent cobalt complexes are difficult to synthesize and isolate. Consequently, very few “cobaltate” complexes are known and there is a lack of architectural diversity in this field. Lewis acidic d 0 group IV metals have been demonstrated to stabilize Co –I centers via metal–metal bonds. Herein, we report the synthesis of bis(phosphinoamide) heterobimetallic M IV /Co –I arene complexes (M = Zr, Hf). The driving force to maintain the aromaticity of the arenes dictates the hapticity of the Co-bound arene ligands and influences the binding arrangement of the phosphinoamide ligands. Benzene and toluene were observed to bind η 6 to the Co –I center, forcing dissociation of one of the phosphinoamide ligands, whereas η 4 -coordination of anthracene allows both phosphinoamide ligands to remain bound to the Co center. The identity of both the arene and the group IV metal ion starkly influence the lability of the arene. For instance, the Co-bound benzene ligand in the Zr IV /Co –I benzene complex rapidly exchanges with C 6 D 6 in solution, whereas toluene/C 6 D 6 exchange is much slower and appreciable C 6 H 6 /C 6 D 6 exchange is not observed for the Hf analogue. The Zr IV /Co –I benzene complex loses benzene upon repeated exposure to vacuum to form an arene-free tetrametallic dimer.

aromatic compounds↗
DOE OSTI2023

Biosynthesis of Haloterpenoids in Red Algae via Microbial-like Type I Terpene Synthases

Red algae or seaweeds produce highly distinctive halogenated terpenoid compounds, including the pentabromochlorinated monoterpene halomon that was once heralded as a promising anticancer agent. The first dedicated step in the biosynthesis of these natural product molecules is expected to be catalyzed by terpene synthase (TS) enzymes. Recent work has demonstrated an emerging class of type I TSs in red algal terpene biosynthesis. However, only one such enzyme from a notoriously haloterpenoid-producing red alga (Laurencia pacifica) has been functionally characterized and the product structure is not related to halogenated terpenoids. Herein, we report 10 new type I TSs from the red algae Portieria hornemannii, Plocamium pacificum, L. pacifica, and Laurencia subopposita that produce a diversity of halogenated mono- and sesquiterpenes. Here we used a combination of genome sequencing, terpenoid metabolomics, in vitro biochemistry, and bioinformatics to establish red algal TSs in all four species, including those associated with the selective production of key halogenated terpene precursors myrcene, trans-β-ocimene, and germacrene D-4-ol. These results expand on a small but growing number of characterized red algal TSs and offer insight into the biosynthesis of iconic halogenated algal compounds that are not without precedence elsewhere in biology.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

PCET-Based Ligand Limits Charge Recombination with an Ir(III) Photoredox Catalyst

Upon photoinitiated electron transfer, charge recombination limits the quantum yield of photoredox reactions for which the rates for the forward reaction and back electron transfer are competitive. Taking inspiration from a proton-coupled electron transfer (PCET) process in Photosystem II, here a benzimidazole-phenol (BIP) has been covalently attached to the 2,2'-bipyridyl ligand of [Ir(dF(CF 3 )ppy) 2 (bpy)][PF 6 ] (dF(CF 3 )ppy = 2-(2,4-difluorophenyl)-5-(trifluoromethyl)pyridine; bpy = 2,2'-bipyridyl). Excitation of the [Ir(dF(CF 3 )ppy) 2 (BIP-bpy)][PF 6 ] photocatalyst results in intramolecular PCET to form a charge-separated state with oxidized BIP. Subsequent reduction of methyl viologen dication (MV 2+ ), a substrate surrogate, by the reducing moiety of the charge separated species demonstrates that the inclusion of BIP significantly slows the charge recombination rate. The effect of ~24-fold slower charge recombination in a photocatalytic phthalimide ester reduction resulted in a greater than 2-fold increase in reaction quantum efficiency.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2021

Effect of tectonic processes on biosphere–geosphere feedbacks across a convergent margin

The subsurface is among Earth’s largest biomes, but the extent to which microbial communities vary across tectonic plate boundaries or interact with subduction-scale geological processes remains unknown. Here we compare bacterial community composition with deep-subsurface geochemistry from 21 hot springs across the Costa Rican convergent margin. We find that cation and anion compositions of the springs reflect the dip angle and position of the underlying tectonic structure and also correlate with the bacterial community. Co-occurring microbial cliques related to cultured chemolithoautotrophs that use the reverse tricarboxylic acid cycle (rTCA) as well as abundances of metagenomic rTCA genes correlate with concentrations of slab-volatilized carbon. This, combined with carbon isotope evidence, suggests that fixation of slab-derived CO2 into biomass may support a chemolithoautotrophy-based subsurface ecosystem. We calculate that this forearc subsurface biosphere could sequester 1.4 × 10 9 to 1.4 × 10 10 mol of carbon per year, which would decrease estimates of the total carbon delivered to the mantle by 2 to 22%. Furthermore, based on the observed correlations, we suggest that distribution and composition of the subsurface bacterial community are probably affected by deep tectonic processes across the Costa Rican convergent margin and that, by sequestering carbon volatilized during subduction, these chemolithoautotrophic communities could in turn impact the geosphere.

54 ENVIRONMENTAL SCIENCES↗