Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mooring”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

An Open-Source Frequency-Domain Model for Floating Wind Turbine Design Optimization

A new frequency-domain dynamics model has been developed that uses open-source components to efficiently represent a complete floating wind turbine system. The model, called RAFT (Response Amplitudes of Floating Turbines), incorporates quasi-static mooring reactions, strip-theory and potential-flow hydrodynamics, blade-element-momentum aerodynamics, and linear turbine control. The formulation is compatible with a wide variety of support structure configurations and no manual or time-domain preprocessing steps are required, making RAFT very practical in design and optimization workflows. The model is applied to three reference floating wind turbine designs and its predictions are compared with results from time-domain OpenFAST simulations. There is good agreement in mean offsets as well the statistics and spectra of the dynamic response, verifying RAFT’s general suitability for floating wind analysis. Follow-on work will include verification of potential-flow and turbine-control features and application to optimization problems.

17 WIND ENERGY↗
DOE OSTI2026

OC7 Project Phase II: Code Comparison and Experimental Validation of Hydroelastic Effects and Member-Level Loads in Floating Structures

This paper presents results from Phase II of the OC7 project, focusing on hydroelastic modeling and member-level load prediction for a flexible floating offshore structure. Numerical predictions from 11 academic and industrial partners are validated against experimental measurements obtained from a 1:70-scale test of the VolturnUS-S semisubmersible platform. A comprehensive set of verification and validation cases is examined. The results demonstrate that hydrodynamic added mass has a significant impact on predicted elastic natural frequencies. Under regular wave excitation, the numerical models reproduce platform motions and mooring line tensions with good accuracy. Member-level loads are also predicted with reasonable accuracy. Some discrepancies are observed for potential-flow models not accounting for higher-order effects associated with the instantaneous wetted surface.

17 WIND ENERGY↗
DOE OSTI2020

Chiral topologically ordered insulating phases in arrays of interacting integer quantum Hall islands

Here, we study networks of Coulomb-blockaded integer quantum Hall islands with even fillings ν = 2 k ( k being an integer), including cases with 2 k layers each of ν = 1 fillings. Allowing only spin-current interactions between the islands (i.e., without any charge transfer), we obtain solvable models leading to a rich set of insulating S U ( 2 ) k topologically ordered phases. The case with k = 1 is dual to the Kalmeyer-Laughlin phase, k = 2 to Kitaev's chiral spin liquid and the Moore-Read state, and k = 3 contains a Fibonacci anyon that may be utilized for universal topological quantum computation. Additionally, we show how the S U ( 2 ) k topological phases may be obtained also in an array of islands with ν = 2 k integer quantum Hall states and critical spin chains in a checkerboard pattern. The array and checkerboard constructions gap out the charge mode and additional “flavor” modes by virtue of their geometry. Furthermore, we find that a fine tuning of the system parameter is not needed in the checkerboard configuration and the ν = 2 case. We also discuss their bulk excitations, and show that their thermal Hall conductance is universal, reflecting the central charge c = 3 k / ( k + 2 ) of the chiral edge modes.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Microscopic diagnosis of universal geometric responses in fractional quantum Hall liquids

Topological quantum liquids contain internal degrees of freedom that are coupled to geometric response. Yet, an explicit and microscopic identification of the geometric response remains difficult. Here, taking notable fractional quantum Hall (FQH) states as typical examples, we systematically investigate a promising protocol—the Dehn-twist deformation on the torus geometry—to probe the geometric response of correlated topological states and establish the relation between such response and universal properties of pertinent states. Based on analytical derivations and numerical simulations, we find that the geometry-induced Berry phase encodes features for a broad class of FQH states at the Laughlin, hierarchy, Halperin and non-Abelian Moore-Read fillings. Our findings conclusively demonstrate that the adiabatic Dehn-twist deformation can faithfully capture rich geometric and topological information, including the Hall viscosity and topological spin of the pertinent FQH state and the chiral central charge of the underlying edge conformal field theory. Our approach provides a powerful way to reveal topological orders of generic FQH states and address previously open questions.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Coexistence of non-Abelian chiral spin liquid and magnetic order in a spin-1 antiferromagnet

We study the ground-state properties of a spin-1 Heisenberg model on a square lattice with the first- and second-nearest-neighbor antiferromagnetic couplings $J_1$ and $J_2$ and a three-spin scalar chirality term $J_\chi$. Using the density matrix renormalization group calculation, we map out a global phase diagram including various magnetic order phases and an emergent quantum spin liquid phase. The nature of the spin liquid is identified as a bosonic non-Abelian Moore-Read state from the fingerprint of the entanglement spectra and identification of a full set of topological sectors. We further unveil a stripe magnetic order coexisting with this spin liquid. Furthermore, our results not only establish a rare example of non-Abelian spin liquids in simple spin systems but also demonstrate the coexistence of fractionalized excitations and magnetic order beyond mean-field descriptions.

2-dimensional systems↗
DOE OSTI2021

Shadow poles in the alternative parametrization of R-matrix theory

In this work, we discover new, hitherto unknown, shadow poles in Brune’s alternative parametrization of R-matrix theory [C. R. Brune, Phys. Rev. C 66, 044611 (2002)]. Where these poles are, and how many, depends on how one continues R-matrix operators to complex wavenumbers (specially the shift S and penetration P functions). This has little consequence for the exact R-matrix formalism (past the last energy threshold), as we show one can still always fully reconstruct the scattering matrix with only the previously known alternative parameters (poles and corresponding resonance widths), for which there were as many poles as the number of levels Nλ. However, we generalize the alternative parametrization to the Reich-Moore formalism, and show that the choice of continuation is now critical as it changes the alternative parameters values (poles and residue widths are now complex). In order to establish nuclear libraries with alternative parameters, the nuclear community will thus have to decide what convention to adopt. We argue in favor of analytical continuation (against the legacy Lane and Thomas approach) in a follow-up article [P. Ducru, Phys. Rev. C, submitted (2020)]. We observe the first evidence of shadow poles in the alternative parametrization of R-matrix theory in isotope xenon 134 Xe spin-parity group J π = 1=2 (–) , and show how they indeed depend on the choice of continuation to complex wavenumbers.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Higher Hall conductivity from a single wave function: Obstructions to symmetry-preserving gapped edge of (2+1)-dimensional topological order

A (2+1)D topologically ordered phase with U(1) symmetry may or may not have a symmetric gapped edge state, even if both thermal and electric Hall conductivity are vanishing. It has recently been discovered that there are “higher” versions of Hall conductivity valid for fermionic fractional quantum Hall (FQH) states that obstruct symmetry-preserving gapped edge states beyond thermal and electric Hall conductivity. In this paper, we show that one can extract higher Hall conductivity from a single wave function of an FQH state, by evaluating the expectation value of the “partial rotation” unitary, which is a combination of partial spatial rotation and a U(1) phase rotation. This result is verified numerically with the fermionic Laughlin state with 𝜈=1/3 and 1/5, as well as the non-Abelian Moore-Read state. Together with topological entanglement entropy, we prove that the expectation values of the partial rotation completely determine if a bosonic/fermionic Abelian topological order with U(1) symmetry has a symmetry-preserving gappable edge state or not. We also show that thermal and electric Hall conductivity of Abelian topological order can be extracted by partial rotations. Even in non-Abelian FQH states, partial rotation provides the Lieb-Schultz-Mattis type theorem constraining the low-energy spectrum of the bulk-boundary system. The generalization of higher Hall conductivity to the case with Lie group symmetry is also presented.

2-dimensional systems↗
DOE OSTI2024

Controlling cantilevered adaptive X-ray mirrors

Modeling the behavior of a prototype cantilevered X-ray adaptive mirror (held from one end) demonstrates its potential for use on high-performance X-ray beamlines. Similar adaptive mirrors are used on X-ray beamlines to compensate optical aberrations, control wavefronts and tune mirror focal distances at will. Controlled by 1D arrays of piezoceramic actuators, these glancing-incidence mirrors can provide nanometre-scale surface shape adjustment capabilities. However, significant engineering challenges remain for mounting them with low distortion and low environmental sensitivity. Finite-element analysis is used to predict the micron-scale full actuation surface shape from each channel and then linear modeling is applied to investigate the mirrors' ability to reach target profiles. Using either uniform or arbitrary spatial weighting, actuator voltages are optimized using a Moore–Penrose matrix inverse, or pseudoinverse, revealing a spatial dependence on the shape fitting with increasing fidelity farther from the mount.

47 OTHER INSTRUMENTATION↗
DOE OSTI2023

Errant Beam Detection Using the AMD Versal ACAP and Vitis AI

The prevalence of ML and AI-powered solutions along with the slowing of Moore's Law has given rise to novel hardware platforms aimed at accelerating ML and AI. While programming these hardware platforms can be difficult, particularly for non-hardware experts, hardware vendors provide high-level tooling in an effort to address this difficulty. The Versal ACAP is an SoC designed by AMD that combines CPU cores, FPGA fabric, and a tiled, vector architecture called an AI engine all on the same socket. In an effort to more easily program this heterogeneous system, AMD has provided the Vitis AI development stack. In this work, we leverage Vitis AI to program a Versal ACAP to perform errant beam detection in the Spallation Neutron Source at Oak Ridge National Laboratory. Our initial work shows that after quantization and compilation of the model for the Versal ACAP, the classification accuracy, as measured by the AUC metric, is over 95% accurate while achieving this accuracy in 46 microseconds on average.

Cabrera, Anthony↗
DOE OSTI2020

Tucker-1 Boolean Tensor Factorization with Quantum Annealers

Quantum annealers are an emerging computational architecture that have the potential to address some challenging computational issues that will be left unresolved as we approach the end of the Moore's Law era of computing. D-Wave quantum annealers are designed to solve a challenging set of problems - quadratic unconstrained binary optimization problems. This makes them a natural fit for solving problems with binary or Boolean variables. Here, we explore the use of a quantum annealer to solve Boolean tensor factorization. The goal of Boolean tensor factorization is to represent a high-dimensional tensor filled with Boolean values as a product of Boolean matrices and a Boolean core tensor. We show that a particular Boolean tensor factorization problem (called Tucker-1 factorization) can be decomposed into a sequence of quadratic unconstrained binary optimization problems that can be solved with a D-Wave 2000Q quantum annealer. While quantum annealers specifically and quantum computers in general are at a fairly early stage in their development, they are currently capable of solving these Boolean tensor factorization problems. Importantly, our results show that for fairly small tensors, we are frequently able to obtain an accurate (sometimes exact) factorization using quantum annealing.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Scaled-up Neuromorphic Array Communications Controller (SNACC) for Large-scale Neural Networks

Neuromorphic computing is one promising post-Moore’s law era technology, which takes inspiration from biological brains to perform computing tasks. The human brain contains billions of neurons with trillions of synapses and as neuromorphic hardware systems scale to larger and larger sizes, the communication system used to transfer information between neuromorphic elements and traditional computers must scale to keep up. In prior work, we describe the use of a separate neuromorphic array communications controller to support low-latency, high-throughput communication between our neuromorphic systems and a traditional computer. In this work, the neuromorphic array communications controller is used to support the scaling of a neuromorphic development system which uses multiple neuromorphic processors arranged in a two-dimensional array. The neuromorphic array communications controller, along with scalable local connections, is used to create a scalable neuromorphic platform to enable the development and testing of large neuromorphic network arrays.

Young, Aaron↗
DOE OSTI2021

A Hybrid System for Learning Classical Data in Quantum States

Deep neural network-powered artificial intelligence has rapidly changed our daily life with various applications. However, as one of the essential steps of deep neural networks, training a heavily-weighted network requires a tremendous amount of computing resources. Especially in the post Moore’s Law era, the limit of semiconductor fabrication technology has restricted the development of learning algorithms to cope with the increasing high intensity training data. Meanwhile, quantum computing has exhibited its significant potential in terms of speeding up the traditionally compute-intensive workloads. For example, Google illustrates quantum supremacy by completing a sampling calculation task in 200 seconds, which is otherwise impracticable on the world’s largest supercomputers. To this end, quantum-based learning becomes an area of interest, with the promising of a quantum speedup. In this paper, we propose GenQu, a hybrid and general-purpose quantum framework for learning classical data through quantum states. We evaluate GenQu with real datasets and conduct experiments on both simulations and real quantum computer IBM-Q. Our evaluation demonstrates that, comparing with classical solutions, the proposed models running on GenQu framework achieve similar accuracy with a much smaller number of qubits, while significantly reducing the parameter size by up to 95.86% and converging speedup by 66.67% faster.

Stein, Samuel A.↗
DOE OSTI2022

SpectralFly: Ramanujan Graphs as Flexible and Efficient Interconnection Networks

In recent years, graph theoretic considerations have become increasingly important in the design of HPC interconnection topologies. One approach is to seek optimal or near-optimal families of graphs with respect to a particular graph theoretic property, such as diameter. For example, the SlimFly topology is based on a construction of McKay, Miller, and \v{S}ir\'{a}\v{n} which produces a diameter two graph on a number of nodes approaching the Moore bound, i.e. the largest possible diameter two graph with a fixed radix. Motivated by recent work of Aksoy, Bruillard, Young, and Raugas, we consider topologies which optimize the spectral gap rather than the diameter. In particular, we introduce a novel HPC topology, SpectralFly, designed around the Ramanujan graph construction of Lubotzky, Phillips, and Sarnak (LPS). In this work, we show that the combinatorial properties, such as diameter, bisection bandwidth, average path length, and resilience to link failure, of SpectralFly topologies are better than, or comparable to, similarly constrained DragonFly, SlimFly, and BundleFly topologies. Additionally, we simulate the performance of SpectralFly topologies on a representative sample of physics-inspired HPC workloads using the Structure Simulation Toolkit Macroscale Element Library simulator and demonstrate considerable benefit to using LPS construction as the basis of the SpectralFly topology.

graphs and networks, network topology, interconnec↗
DOE OSTI2023

Quantum Computing and Visualization: A Disruptive Technological Change Ahead

The focus of this Visualization Viewpoints article is to provide some background on quantum computing (QC), to explore ideas related to how visualization helps in understanding QC, and examine how QC might be useful for visualization with the growth and maturation of both technologies in the future. In a quickly evolving technology landscape, QC is emerging as a promising pathway to overcome the growth limits in classical computing. In some cases, QC platforms offer the potential to vastly outperform the familiar classical computer by solving problems more quickly or that may be intractable on any known classical platform. As further performance gains for classical computing platforms are limited by diminishing Moore’s Law scaling, QC platforms might be viewed as a potential successor to the current field of exascale-class platforms. Importantly, while present-day QC hardware platforms are still limited in scale, the field of quantum computing is robust and rapidly advancing in terms of hardware capabilities, software environments for developing quantum algorithms, and educational programs for training the next generation of scientists and engineers. After a brief introduction to QC concepts, the focus of this article is to explore the interplay between the fields of visualization and QC. First, visualization has played a role in QC by providing the means to show representations of the quantum state of single-qubits in superposition states and multiple-qubits in entangled states. Second, there are a number of ways in which the field of visual data exploration and analysis may potentially benefit from this disruptive new technology though there are challenges going forward.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2024

Shifting Between Compute and Memory Bounds: A Compression-Enabled Roofline Model

In the evolving landscape of high-performance computing, especially to fight the end of Moore’s Law and Dennard’s Scaling, the ability to shift between compute-bound and memory-bound states is critical for enhancing adaptability and flexibility to diverse system and domain-specific architectures. Such capability is vital for optimizing performance across distinguished hardware configurations, such as accelerators, memory hierarchies, and cache systems. Despite that ad hoc optimization techniques, such as compressed/approximate computation, have been enabled for compute-/data-intensive computing for improved performance in distinct hardware settings, there lacks an understanding of 1) the rational behind performance improvement; 2) capability of different optimizations; 3) what optimization to respond to specific computational and memory demands. This work proposes a compression-enabled roofline model to facilitate this adaptability with data compression techniques to balance and transform between computational and memory demands. This model enables applications to adjust in response to the specific strengths and limitations of the underlying hardware and system to optimize resource utilization. The effectiveness of this approach is demonstrated with matrix multiplication kernels on different input sizes, with turning on/off various compression techniques, including 1) low-precision floating point; 2) sparse matrix formulation; and 3) compressed arrays with ZFP. By reducing memory transfer volumes and cache misses and increasing data locality and computational intensity through compression, the specific roofline model can transform between compute and memory bounds to align more efficiently with system capabilities. This advancement not only improves overall performance but also maximizes adaptability in diverse computing environments.

Naraparaju, Ramasoumya [University of Washington]↗
DOE OSTI2025

Design of Hopfield Networks Based on Superconducting Coupled Oscillators

The global energy shortage has driven the development of many energy-efficient computational platforms beyond Moore's law, among which brain-inspired neuromorphic computing is one of the promising solutions. Associative memory and pattern recognition are important computations solved by brain-inspired Hopfield networks. Classical Hopfield networks store memories via fixed point attractors of their dynamics. In oscillatory Hopfield networks, these attractors are replaced by periodic orbits. Here, we design an oscillatory Hopfield network based on coupled superconducting oscillators. We first employ a mathematical phase reduction approach to map networks of coupled superconducting rapid single flux quantum (RSFQ) ring oscillators to coupled Kuramoto phase-oscillator networks. We use this theory to numerically optimize the hardware's mutual inductances in order to directly match the phase-reduced superconducting oscillators to a model of phase-oscillator-based Hopfield networks. The resulting network can store multiple oscillatory phase-locked memory patterns and recover the patterns based on the initial phase conditions. As different pattern recognition tasks, or learning, require tunable connectivity strengths between the oscillatory nodes, we further employ a coupler circuit that enables tuning the coupling strength between two oscillators by applying an external flux. We demonstrate the functionality of our design through numerical simulations of a small example network with oscillators operating at 86 GHz and recognizing patterns within 10 ns. Our approach enables the learning and retrieval of dynamical memory patterns with a wide range of applications where rhythmic dynamic output is beneficial.

Cheng, Ran↗
DOE OSTI2023

Property-Graded Stainless Steel 316L by Selective Laser Melting: Characterization & Design

Abstract The purpose of this research work is to characterize and inform the design of (mechanical) property-graded bulk structures made from a single metallic alloy via a laser powder bed fusion (LPBF) process, with an end goal of creating repeatable/reproducible functionally-graded additively manufactured (FGAM) parts. This paper specifically investigates the manufacture of stainless steel (SS) 316L structures via a pulsed selective laser melting (SLM) process, and the underlying causes of property variations (within a functionally-acceptable range) through various material characterization techniques. For this, a design of experiments spanning the volumetric energy density (VED) based process parameter design space was utilized to investigate the range of functionally-acceptable physical/mechanical properties achievable in SS 316L. Five sample conditions (made via different process parameter combinations) were down-selected for in-depth microstructure analysis and mechanical/physical property characterization; these were suitably selected to impart a wide and controllable property range (209–318 HV hardness, 90–99.9% relative density, and 154–211 GPa modulus). It was observed that property variations resulted from combinations of porosity types/amounts, martensitic phase fractions, and grain sizes. Based on these findings, property-graded standard test specimens were designed and manufactured for further investigation—tensile specimens having a monotonic hardness change along its gauge length, four-point bending specimens with varying elastic moduli as a function of the distance from the neutral axis, and Moore’s rotating beam fatigue specimens with moduli variations based on the distance from the center. Altogether, this work lays the foundation for understanding and designing the local and global mechanical performance of FGAM bulk structures.

Engineering↗
DOE OSTI2021

Implementation and Verification of Cable Bending Stiffness in MoorDyn

The relatively large motions experienced by floating wind turbines and wave energy converters pose a challenge for power cables, whose internal components provide significant bending resistance and are sensitive to deformation. The behavior and associated design considerations of power cables in these highly dynamic applications make coupled analysis relevant for design. Bending stiffness capabilities have recently been added to the lumped-mass mooring dynamics model MoorDyn to enable simulation of dynamic power cables. MoorDyn is a common modeling choice for floating wind energy simulation (often coupled with OpenFAST) and floating wave energy converter simulation (often coupled with WEC-Sim) but the model’s previous line elasticity formulation only considered axial stiffness. To properly capture the dynamics of power cables, a bending stiffness model has been added that approximates cable curvature based on the difference in tangent vectors of adjacent elements. The resulting bending moment is realized by applying forces on adjacent nodes, enabling cable modeling while leaving the underlying lumped-mass formulation unchanged. In this paper, the new bending stiffness implementation is verified in static conditions against analytical solutions and then in a dynamic power cable scenario in comparison with the commercial simulator OrcaFlex. The dynamic scenario uses prescribed motions and includes wave loadings on the cable. Results indicate correct implementation of bending stiffness and show close agreement with OrcaFlex.

50 EE - Wind and Water Power Program - Water (EE-4↗