Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “monotonicity”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Constrained Self-adaptive Solutions Procedures for Structure Subject to High Temperature Elastic-plastic Creep Effects

This paper will develop a new solution strategy which can handle elastic-plastic-creep problems in an inherently stable manner. This is achieved by introducing a new constrained time stepping algorithm which will enable the solution of creep initiated pre/postbuckling behavior where indefinite tangent stiffnesses are encountered. Due to the generality of the scheme, both monotone and cyclic loading histories can be handled. The presentation will give a thorough overview of current solution schemes and their short comings, the development of constrained time stepping algorithms as well as illustrate the results of several numerical experiments which benchmark the new procedure.

Padovan, J.↗

Fluid signatures of rotational discontinuities at Earth's magnetopause

Fluid signatures in the MHD approximation at rotational discontinuities (RD) of finite width called rotational shear layers (RSL) are examined for general flow and magnetic geometries. Analytical and geometrical arguments illustrate that the fluid speed can either go up or down across an RSL for a fixed normal mass flux. The speed profile may or may not be monotonic depending on the boundary conditions. The flow velocity may or may not be field aligned or ""jetting'' as a result of traversing the RSL. In general, significant ""convection'' is expected in the layer. The observable signatures of (MHD) RSL's depend on 7 (boundary condition) parameters are (1) the mass density, (2 to 5) the incident normal and transverse components of the magnetic field and fluid velocity, (6) the angle epsilon between the incident tangential flow velocity and tangential magnetic field, and (7) the size of the magnetic angular rotation implemented by the layer delta phi.

Scudder, J. D.↗

Sorption of noble gases by solids, with reference to meteorites. I - Magnetite and carbon

The trapping of meteoritic noble gases by solids is simulated through the synthesis of 18 Fe3O4 samples at 350-720 K in a noble gas atmosphere, by means of the reactions: (1) 3Fe + 4H2O yields Fe3O4 + 4H2, using Ne, Ar, Kr and Xe; and (2) 3Fe + 4CO yields Fe3O4 + 4C + carbides, using Xe. Etching experiments suggest an analogy with 'Phase Q' in meteorites. Adsorbed atmospheric gases are present in all samples, and dominate whenever the noble gas partial pressure in the atmosphere is greater than that in the synthesis. While many of the results of Lancet and Anders (1973) appear to have been dominated by such an atmospheric component, others are suspect. When the doubtful samples of Lancet and Anders are corrected or eliminated, the fractionation pattern no longer peaks at Ar, but rather, as in the present sample, rises monotonically from Ne to Xe. No evidence is found for the earlier study's claim of a strong temperature dependence.

Yang, J.↗

Volcanic eruption plumes on Io

The nine eruption plumes observed by Voyager 1 are discussed. The plumes range in height from about 60 to over 300 km with corresponding ejection velocities of about 0.5 to 1.0 km/s. Plume sources are located on level plains rather than topographic highs and consist of either fissures or calderas. Except for Ple, the brightness distribution monotonically decreases from the core to the top of the plume. Numerous surface deposits similar to those associated with active plumes probably mark the sites of recent eruptions. The distribution of active and recent eruptions appears to be concentrated in the equatorial regions. This suggests that the depositional rate is greater and the surface age younger in the equatorial regions, possibly accounting for the active eruptions suggests that sulfur volcanism rather than silicate volcanism is the most likely driving mechanism for the eruption plumes.

Strom, R. G.↗

Effects of volume averaging on the line spectra of vertical velocity from multiple-Doppler radar observations

Calculations of the ratio of the true one-dimensional spectrum of vertical velocity and that measured with multiple-Doppler radar beams are presented. It was assumed that the effects of pulse volume averaging and objective analysis routines is replacement of a point measurement with a volume integral. A u and v estimate was assumed to be feasible when orthogonal radars are not available. Also, the target fluid was configured as having an infinite vertical dimension, zero vertical velocity at the top and bottom, and having homogeneous and isotropic turbulence with a Kolmogorov energy spectrum. The ratio obtained indicated that equal resolutions among radars yields a monotonically decreasing, wavenumber-dependent response function. A gain of 0.95 was demonstrated in an experimental situation with 40 levels. Possible errors introduced when using unequal resolution radars were discussed. Finally, it was found that, for some flows, the extent of attenuation depends on the number of vertical levels resolvable by the radars.

Gal-Chen, T.↗

A sensitivity/intrusion comparison of mental workload estimation techniques using a flight task emphasizing perceptual piloting activities

In a literature review it was found that little research effort has been directly applied to the problem of specifying a viable workload estimation technique for a given pilot/aircrew problem. Furthermore, the relative sensitivity and intrusion of most techniques has not been studied. The present investigation is concerned with a comparative evaluation of eight workload estimation techniques under identical experimental conditions in a flight simulator. The objective of this comparison was to determine the relative sensitivity and intrusion of each estimation technique in applications to a piloting situation which emphasizes the use of perceptual processes. No differential intrusion could be observed, but six of the eight techniques did show sensitivity to changes in perceptual load. All significant techniques displayed monotonic increases in measured values across the three loading levels considered.

Casali, J. G.↗

Rapid distortion of small-scale turbulence by an axisymmetric contraction

The rapid distortion of small-scale turbulence by an axisymmetric internal contracting flow has been investigated. The analysis is an example of the modern version of rapid distortion theory in that the effects of vortex bending and tilting are included. On the axis of symmetry, the classical results are recovered. The longitudinal and lateral velocity components are suppressed and amplified, respectively, with increasing contraction ratio. These effects are enhanced with increasing radial position. The numerical calculations also show that the correlation between the streamwise and radial velocity components increases monotonically with respect to both the radial location and the contraction ratio. The longitudinal and lateral one-dimensional spectra show a shift towards higher and lower wavenumbers, respectively, as the contraction ratio increases. Here, these effects become less pronounced for larger radii. These results also show that the downstream longitudinal integral length scale based on the streamwise velocity as well as the one based on the transverse velocity increase with the radial coordinate.

Hultgren, L. S.↗

On the seasonal sea ice cover of the Sea of Okhotsk

Satellite microwave imagery has allowed determination of sea ice conditions in the Sea of Okhotsk over years 1973-1976. Comparisons of the general features of the cycle of sea ice distribution with basic oceanographic factors shows that ice forms first in cold, shallow, low-salinity waters and then seems to drift in a direction approximating the Okhotsk-Kuril current system. The heaviest ice cover occurred in 1973, followed by a much weaker ice cover in 1974. Only the 1972-73 growth season experienced close to monotonic advance. A much greater weakening of the ice cover through polynya formation occurred during the 1976 decay season than in any of the other three years. Two fairly common ice macrostructures in the Sea of Okhotsk were identified as a rectangular structure and a wedge structure; these are strongly correlated with the bathymetry of the region and with the known current system.

Parkinson, C. L.↗

Near-wall similarity in three-dimensional turbulent boundary layers. I - Model review. II - Pressure-driven flow results

Eleven proposed models for near-wall similarity for three-dimensional turbulent boundary layer flows are reviewed. Six of these models are comparatively simple scalar models and five are more complex and/or two-component vector models. Ten of the models can be tested as to their validity or predictive capability with the aid of measured mean velocity field, wall pressure field, and direct wall shear stress field (magnitude and direction) data. One of the models cannot be tested owing to its dependence on two parameters that are at present extremely difficult (if not impossible) to measure. Ten three-dimensional near-wall similarity models are then evaluated with direct wall shear, velocity field, and pressure gradient data from a three-dimensional pressure-driven boundary layer flow. In a primary focus of the interval where y+ is between 50 and 300, graphical results suggest that six simpler models and the freestream component of one complex model are adequate for profiles with monotone increasing skew up to about 15 deg.

Pierce, F. J.↗

Turbulent heat transfer in the separated reattached and redevelopment regions of a circular tube

A numerical study is reported on a flow in a circular pipe with an abrupt expansion. In this paper the behavior of flow in the domain including recirculating and redeveloping regions has been reviewed carefully and a new grid system is employed which provides finer grids in the recirculating region and monotonically expanding grids in the redeveloping region. The predicted results were improved for the class of this flow by incorporating and adapting the low-Reynolds number model of turbulence throughout the solution domain. The computational results obtained by the present model generally are better than the former results of the authors, particularly in the prediction of the reattachment points.

Amano, R. S.↗

The effect of microstructure on the fatigue behavior of Ni base superalloys

Nickel-base superalloys are used in jet engine components such as disks, turbine blades, and vanes. Improvements in the fatigue behavior will allow the life to be extended or the payloads to be increased. The first part of the present investigation deals primarily with the effects of microstructural variations on the fatigue crack propagation (FCP) behavior of nickel-base alloys, while the second part is concerned with low-cycle fatigue (LCF) behavior of Ni base systems. Waspaloy at low temperature is considered, taking into account material heat treatment and test procedures, a composite plot of Waspaloy FCP data, Paris law fatigue crack propagation constants, monotonic tensile data, and overload FCP test results for Waspaloy. It is found that the FCP and overload behavior of nickel-base alloys may be markedly improved by heat treating. Attention is given to effects of cyclic deformation on microstructure and substructure, environmental damage, and an environmental/deformation model of high temperature LCF.

Antolovich, S. D.↗

Dependence of 50-keV upstream ion events at IMP 7 and 8 upon magnetic field bow shock geometry

Results are presented for a statistical study of four years (1972-1976) of IMP 7 and 8 observations at approximately 40 R(E) of 50-200 keV upstream ion events measured with the Energetic Particle Experiment. A monotonic increase in the probability of observing upstream particle events is found with a decrease in the angle (theta-Bn) between the interplanetary magnetic field (IMF) and the local shock normal at the point where the IMF intersects the bow shock, independent of the length of time of bow shock connections exceeding approximately 10 min. Approximately equal probabilities are found for observing an event above a given flux from any portion of the bow shock with the same value of theta-Bn, a growth time of the 50-200 keV events of approximately 10 min, a maximum attainable flux of approximately 25,000/sq cm s sr, and a positive correlation between the probability of exceeding a given flux and the 3 hr Kp index. It is concluded that the local structure of the bow shock in the immediate vicinity of the field line connection is the dominant influence in the generation process of energetic upstream particle events and that wave-particle interactions produce a self-throttling mechanism that limits the maximum flux of ions escaping the upstream foreshock.

Mitchell, D. G.↗

On the optical evaluation of the EL2 deep level concentration in semi-insulating GaAs

A practical procedure for the evaluation of the Fermi energy in semi-insulating (SI)GaAs from electrical measurements is presented. This procedure makes it possible to reliably extend the determination of the major deep level (EL2) concentration, by near-infrared absorption measurements, to SIGaAs. Employing this procedure, it is shown that the EL2 concentration in Czochralski-grown GaAs increases monotonically with increasing As/Ga ratio (throughout the conversion from SI n type to semiconducting p-type crystals) rather than abruptly as previously proposed.

Walukiewicz, W.↗

Studies on aqueous two phase polymer systems useful for partitioning of biological materials

The two phase systems that result when aqueous solutions of dextran and poly(ethylene glycol) (PEG) are mixed above a critical concentration of a few percent provide a useful medium for the separation of biological cell subpopulations via partition between the top, PEG-rich phase and the liquid-liquid phase boundary. Interfacial tensions of such systems have been measured by the rotating drop technique and found to range between 0.1-100 micro-N/m. The tension was found to depend on the length of the tie line describing the system on a phase diagram, via a power law relationship which differed depending on the concentration of Na phosphate buffer present. The electrokinetic properties of drops of one phase suspended in the other were studied for a variety of systems. It was found that the droplet electrophoretic mobility increased monotonically with phosphate concentration and drop diameter but exhibited the opposite sign from that anticipated from phosphate partition measurements. It was possible to take advantage of these electrokinetic properties and dramatically enhance the speed of phase separation through application of relatively small electric fields.

Brooks, D. E.↗

Effects of a rough boundary surface on polarization of the scattered field from an inhomogeneous medium

A combination of the standard Kirchhoff method for rough surface scattering with the Rayleigh phase function radiative transfer method for volume scattering is employed in the present study of the effect of surface roughness on the polarization of the scattered field. It is found that for pure surface scattering, the polarization ratio between zero and 20 deg incidence angles is sensitive to surface roughness change. When both surface and volume scattering are present, however, copolarization nulls by colatitude or degree of polarization at zero to 15 deg incidence angle, and copolarization or crosspolarization nulls by longitude at large incidence angles, are better indicators of surface roughness changes. It is noted that degree of polarization and copolarization nulls by colatitude vary monotonously with incidence angle, while in combined surface and volume scattering these have, respectively, a minimum and a maximum. This characteristic allows the separation of combined surface and volume scattering from pure surface or volume scattering.

Fung, A. K.↗

A lifting surface theory in rotational flow

The partial differential equation for small disturbance steady rotational flow in three dimensions is solved through an integral equation approach. The solution is obtained by using the method of weighted residuals. Specific applications are directed to wings in nonuniform subsonic parallel streams with velocity varying in vertical and spanwise directions and to airfoils in nonuniform freestream. Comparison with limited known results indicates that the present method is reasonably accurate. Numerical results for the lifting pressure of airfoil, lift, induced drag, and pitching moments of airfoil, lift, induced drag, and pitching moments of elliptic, rectangular, and delta wings in a jet, wake, or monotonic sheared stream are presented. It is shown that, in addition to the effect of local dynamic pressures, a positive velocity gradient tends to enhance the lift.

Shiau, M. J.↗

Experimental and theoretical study of combustion jet ignition

A combustion jet ignition system was developed to generate turbulent jets of combustion products containing free radicals and to discharge them as ignition sources into a combustible medium. In order to understand the ignition and the inflammation processes caused by combustion jets, the studies of the fluid mechanical properties of turbulent jets with and without combustion were conducted theoretically and experimentally. Experiments using a specially designed igniter, with a prechamber to build up and control the stagnation pressure upstream of the orifice, were conducted to investigate the formation processes of turbulent jets of combustion products. The penetration speed of combustion jets has been found to be constant initially and then decreases monotonically as turbulent jets of combustion products travel closer to the wall. This initial penetration speed to combustion jets is proportional to the initial stagnation pressure upstream of the orifice for the same stoichiometric mixture. Computer simulations by Chorin's Random Vortex Method implemented with the flame propagation algorithm for the theoretical model of turbulent jets with and without combustion were performed to study the turbulent jet flow field. In the formation processes of the turbulent jets, the large-scale eddy structure of turbulence, the so-called coherent structure, dominates the entrainment and mixing processes. The large-scale eddy structure of turbulent jets in this study is constructed by a series of vortex pairs, which are organized in the form of a staggered array of vortex clouds generating local recirculation flow patterns.

Chen, D. Y.↗

Metallurgical characterization of the fracture of several high strength aluminum alloys

The fracture behavior for structural aluminum alloys (2024, 6061, 7075, and 7178) was examined in selected heat treatments. The investigation included tensile, shear, and precracked notch-bend specimens fractured at ambient temperature under monotonic loading. Specimens were obtained from thin sheets and thick plates and were tested in longitudinal and transverse orientations at different strain rates. Microstructures of alloys were examined using the optical microscope and the scanning electron microscope with associated energy dispersive X ray chemical analysis. Several different types of second phase particles, some not reported by other investigators, were identified in the alloys. Fracture morphology was related to microstructural variables, test variables, and type of commercial product. Specimen orientation examined in the present investigation had little effect on fracture morphology. Test strain rate changes resulted in some change in shear fracture morphology, but not in fracture morphology of tensile specimens.

Bhandarkar, M. D.↗