Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “moisture stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Stable polyurethane coatings for electronic circuits. NASA tech briefs, fall 1982, volume 7, no. 1

One of the most severe deficiencies of polyurethanes as engineering materials for electrical applications has been their sensitivity to combined humidity and temperature environments. Gross failure by reversion of urethane connector potting materials has occurred under these conditions. This has resulted in both scrapping of expensive hardware and reduction in reliability in other instances. A basic objective of this study has been to gain a more complete understanding of the mechanisms and interactions of moisture in urethane systems to guide the development of reversion resistant materials for connector potting and conformal coating applications in high humidity environments. Basic polymer studies of molecular weight and distribution, polymer structure, and functionality were carried out to define those areas responsible for hydrolytic instability and to define polymer structural feature conducive to optimum hydrolytic stability.

Source record↗
NASA NTRS1982

Environmental effects on graphite fiber reinforced PMR-15 polyimide

Studies were conducted to establish the effects of thermo-oxidative and hydrothermal exposure on the mechanical properties of T300 graphite fabric reinforced PMR-15 composites. The effects of hydrothermal exposure on the mechanical properties of HTS-2 continuous graphite fiber composites were also investigated. The thermo-oxidative stability characteristics of T300 fabric and T300 fabric/PMR-15 composites were determined. Flexural strengths of specimens were determined. The useful lifetime of T300 fabric/PMR-15 composites in air at 316 C was found to be about 100 hours. The useful lifetimes in air at 228 and 260 C were determined to be 500 and 1000 hours, respectively. Absorbed moisture was found to reduce the elevated temperature properties of both the T300 fabricate and HTS-2 continuous fiber composites. The moisture effect was found to be reversible. Previously announced in STAR as N81-32194

Serafini, T. T.↗
DOE OSTI2024

Dispersal of high-burnup fuel fragment surrogate particles during and after loss-of-coolant accident tests

The issue of fuel fragmentation, relocation, and dispersal is critical in the licensing and use of high-burnup (>62 GWd/MTU) nuclear fuel in light water reactors (LWRs). In this work, two test series are reported that examine the fragment dispersal during a burst event and an additional dispersal following the burst due to vibrations in the rod, such as those induced by accident recovery systems. To examine dispersal during the balloon and burst portion of a Loss-of-Coolant Accident event, HfO 2 fragments and yttria-stabilized zirconia pellets were filled into an as-fabricated cladding tube, which was then pressurized and subjected to loss-of-coolant accident testing in steam. Results from this test were found to be highly non-prototypic, and dispersal was both significantly more violent and significantly greater in magnitude than identified for actual fuel tests. These findings were attributed to the conservative (more dispersive) nature of the particles chosen for dispersal and to the details of the test conditions used that led to particularly wide bursts. Further, the second set of tests examined dispersal following the burst when vibrations were induced in the rod, primarily via recovery activities such as Emergency Core Cooling System actuation leading to rapid water addition. Post-burst dispersal testing was performed by inducing sinusoidal oscillations with 2–25 nm peak-to-peak amplitude and 2–5 Hz frequencies in pre-burst rods that had been refilled with HfO 2 fragments or high-burnup fragment surrogate mixture of HfO 2 fragments and yttria-stabilized zirconia sands. Testing revealed that rods with large burst openings (7 mm wide in this work) led to unmitigated dispersal from above the burst zone but that smaller bursts (5 mm wide), although still much larger than the mean fragment size of 3 mm, led to effectively no dispersal because of interparticle locking. Additionally, mixture and moisture were found to impact the amount of dispersal: mixtures increased dispersal, and moisture drastically reduced it. The implications of these findings on likely dispersal from actual fuel are discussed.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
NASA NTRS2011

Subsurface Emission Effects in AMSR-E Measurements: Implications for Land Surface Microwave Emissivity Retrieval

An analysis of land surface microwave emission time series shows that the characteristic diurnal signature associated with subsurface emission in sandy deserts carry over to arid and semi-arid region worldwide. Prior work found that diurnal variation of Special Sensor Microwave/Imager (SSM/I) brightness temperatures in deserts was small relative to International Satellite Cloud Climatology Project land surface temperature (LST) variation and that the difference varied with surface type and was largest in sand sea regions. Here we find more widespread subsurface emission effects in Advanced Microwave Scanning Radiometer-EOS (AMSR-E) measurements. The AMSR-E orbit has equator crossing times near 01:30 and 13 :30 local time, resulting in sampling when near-surface temperature gradients are likely to be large and amplifying the influence of emission depth on effective emitting temperature relative to other factors. AMSR-E measurements are also temporally coincident with Moderate Resolution Imaging Spectroradiometer (MODIS) LST measurements, eliminating time lag as a source of LST uncertainty and reducing LST errors due to undetected clouds. This paper presents monthly global emissivity and emission depth index retrievals for 2003 at 11, 19, 37, and 89 GHz from AMSR-E, MODIS, and SSM/I time series data. Retrieval model fit error, stability, self-consistency, and land surface modeling results provide evidence for the validity of the subsurface emission hypothesis and the retrieval approach. An analysis of emission depth index, emissivity, precipitation, and vegetation index seasonal trends in northern and southern Africa suggests that changes in the emission depth index may be tied to changes in land surface moisture and vegetation conditions

Galantowicz, John F.↗
DOE OSTI2026

Linking Plant and Microbial Traits to Soil Carbon for Reliable and Resilient Bioenergy Systems

Bioenergy systems in the United States offer a dual opportunity to supply renewable feedstocks while enhancing ecosystem services such as hydrologic regulation, erosion control, and soil carbon (C) storage. National assessments highlight the potential to grow perennial energy crops to improve soil function and ecosystem resilience. Realizing this potential requires understanding the ecological mechanisms that govern how C is added, transformed, and stabilized in soils. Plant traits determine the quantity, depth, and chemistry of organic inputs, while microbial processes—including carbon use efficiency, necromass formation, and trophic interactions—mediate their transformation and partitioning among soil carbon pools. These biological pathways are shaped by soil physical and chemical properties, including aggregation, texture, and mineralogy, and by environmental drivers such as temperature, moisture, and disturbance, leading to context-dependent outcomes across landscapes. Management practices that diversify feedstocks, minimize disturbance, and maintain soil cover can promote both biomass production and C retention, while microbial amendments and rhizosphere engineering offer emerging, but often context-dependent, tools to optimize plant–microbe interactions. Trade-offs between biomass yield and soil carbon storage may arise when systems favor rapid aboveground productivity at the expense of belowground inputs and microbial processing, underscoring the importance of trait combinations that support both functions. Advances in monitoring, reporting, and verification—spanning precision agriculture, remote sensing, and biosensing—are improving predictive capacity through microbial-explicit process models and model–experiment (ModEx) frameworks. By connecting soil, plant, and microbial processes with advances in modeling and biosensing, this review outlines research priorities focused on trait-based parameterization and ModEx integration. These priorities will support the design of bioenergy systems that are both reliable and resilient, enhancing renewable energy production and ecosystem sustainability.

bioenergy systems↗
DOE OSTI2025

Redox Homeostasis as a Key Regulator of Intramolecular Cyclization in Fungal Perylenequinones

Perylenequinones (PQs) such as hypocrellins and hypomycins are fungal-derived redox-active metabolites with known roles as photosensitizers in the oxidative stress response and applications in photodynamic therapy (PDT). Here, we report that Shiraia sp., a filamentous fungus, can survive and grow under strictly anaerobic (argon) conditions─an unexpected finding for a multicellular eukaryote. Modulating redox homeostasis through chemical reduction and oxygen limitation promotes the intramolecular cyclization of hypocrellins, enhancing hypomycin biosynthesis. Moisture content further influences these transformations, with high water levels favoring keto–enol tautomerization and dry, reducing environments promoting hydride substitution at the peripheral positions. These findings highlight redox modulation as a key driver of perylenequinone metabolism and suggest that PQs may contribute to maintaining redox balance under anaerobic stress, hinting at a broader role in oxygen-independent adaptation in filamentous fungi. This work offers new insights at the interface of redox biology, chemical signaling, and fungal metabolism, with potential implications for the stability and function of PQ-based PDT agents in hypoxic, reducing conditions such as tumor microenvironments.

cyclization↗
DOE OSTI2022

An Energetic Diagnostic of Tropical Cyclone Size in f –Plane Simulations

As a major feature of tropical cyclones (TCs), controlling factors of TC outer size or size scaling remains a fundamental scientific question. The Rossby deformation radius and a natural extent associated with potential intensity have been proposed as two scalings of TC size. But neither of them satisfactorily captures the sensitivity of TC size to sea surface temperature (SST) in idealized f-plane simulations. Inspired by the studies of the Hadley circulation, here we proposed a new TC scaling based on an energetic diagnostic scaling. TC size is primarily a ratio of the secondary circulation strength to subsidence velocity, further determined by the total atmospheric heating in the ascending area, the gross moist stability, the diabatic cooling, and the dry static stability. The former two is based on the moist energetic budget applied to the whole storm structure, while the latter two is based on the dry thermodynamic budget applied to the subsidence areas. The new scaling well captured the sensitivity of TC size to SST in idealized f-plane simulations, partly resulted from expanded ascending area, increased surface moisture deficit, and weakened subsidence with increased SST.

58 GEOSCIENCES↗
DOE OSTI2020

Degradability of Biodegradable Soil Moisture Sensor Components and Their Effect on Maize (Zea mays L.) Growth

Inexpensive and no-maintenance biodegradable soil moisture sensors could improve existing knowledge on spatial and temporal variability of available soil water at field-scale. Such sensors can unlock the full potential of variable-rate irrigation (VRI) systems to optimize water applications in irrigated cropping systems. The objectives of this study were to assess (i) the degradation of soil moisture sensor component materials and (ii) the effects of material degradation on maize (Zea Mays L.) growth and development. This study was conducted in a greenhouse at Colorado State University, Colorado, USA, by planting maize seeds in pots filled with three growing media (field soil, silica sand, and Promix commercial potting media). The degradation rate of five candidate sensor materials (three blends of beeswax and soy wax, balsa wood, and PHBV (poly(3-hydroxybutyrate-co-3-hydroxyvalerate))) was assessed by harvesting sensor materials at four maize growth stages (30, 60, 90, and 120 days after transplanting). All materials under consideration showed stability in terms of mass and dimension except PHBV. PHBV was degraded entirely within 30 days in soil and Promix, and within 60 days in sand. Balsa wood did now show any significant reduction in mass and dimensions in all growth media. Similarly, there was no significant mass loss across wax blends (p = 0.05) at any growth stage, with a few exceptions. Among the wax blends, 3:1 (beeswax:soy wax) was the most stable blend in terms of mass and dimension with no surface cracks, making it a suitable encapsulant for soil sensor. All materials under consideration did not have any significant effect on maize growth (dry biomass, green biomass, and height) as compared to control plants. These results indicated that 3:1 beeswax:soy wax blend, PHBV, and balsa wood could be suitable candidates for various components of biodegradable soil moisture sensors.

Dahal, Subash (ORCID:0000000205489103)↗
NASA NTRS2009

Orion Landing Simulation Eight Soil Model Comparison

LS-DYNA finite element simulations of a rigid Orion Crew Module (CM) were used to investigate the CM impact behavior on eight different soil models. Ten different landing conditions, characterized by the combination of CM vertical and horizontal velocity, hang angle, and roll angle were simulated on the eight different soils. The CM center of gravity accelerations, pitch angle, kinetic energy, and soil contact forces were the outputs of interest. The simulation results are presented, with comparisons of the CM behavior on the different soils. The soils analyzed in this study can be roughly categorized as soft, medium, or hard, according to the CM accelerations that occur when landing on them. The soft group is comprised of the Carson Sink Wet soil and the Kennedy Space Center (KSC) Low Density Dry Sand. The medium group includes Carson Sink Dry, the KSC High Density In-Situ Moisture Sand and High Density Flooded Sand, and Cuddeback B. The hard soils are Cuddeback A and the Gantry Unwashed Sand. The softer soils were found to produce lower peak accelerations, have more stable pitch behavior, and to be less sensitive to the landing conditions. This investigation found that the Cuddeback A soil produced the highest peak accelerations and worst stability conditions, and that the best landing performance was achieved on the KSC Low Density Dry Sand.

Mark, Stephen D.↗
NASA NTRS1984

A study of the effects of end-cap molecular species on environmental characteristics of polimidesulfones

To improve the environmental stability and mechanical properties of polyimidesulfone (PISO2), it was decided to investigate the effects of various types of end caps on its thermo-mechanical and related properties. It was noted that end caps are effective in reducing the environmental damage susceptibility of PISO2 samples, apparently due to their ability to react with free end groups which are believed to be moisture pickup sites. Phthalic anydride, aniline and aminobenzophenone were the end caps used in this study.

Singh, J. J.↗
DOE OSTI2021

Robust Unencapsulated Perovskite Solar Cells Protected by a Fluorinated Fullerene Electron Transporting Layer

The emergent perovskite photovoltaics technology faces challenges like the long-term durability combining moisture, thermal, and photo stresses that prevents them from competing with established technologies. In this work, we introduce a series of new fluorinated fullerenes as an electron-transporting layer (ETL) for robust perovskite photovoltaics that deliver a high power conversion efficiency of 21.27% with substantially improved durability against environmental stressing. The hydrophobic nature of the new fullerene protects the unencapsulated perovskite cell with stability over 1400 h in 85% relative humidity. Notably, the unencapsulated device maintained 80% of their original performance (T-80) after being immersed in water for over 10 min. Detailed characterizations suggest that the fluorinated fullerene can immobilize the cations in perovskites and passivate the surface traps. Therefore, the T-80 lifetime of the devices under constant illumination reached 1920 h. On the basis of the accelerated test, we estimate a lifetime approaching 10 years with encapsulation. The successful demonstration of the new ETL can stimulate further research and momentum for future photovoltaic technology development.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2015

Soil Moisture Active and Passive (SMAP) White-Painted Expanded Polystyrene (EPS) Radome Survivability Test

NASA's SMAP Mission launched in January 2015 into a 685 km near-polar, sun-synchronous orbit. The SMAP instrument architecture incorporates an L-band radar and radiometer which share a common feedhorn and mesh reflector. The instrument rotates about the nadir axis at approximately 15 rpm, thereby providing a conically scanning wide swath antenna beam that is capable of achieving global coverage within three days. The radiometer and its associated electronics have tight thermal stability requirements in order to meet the required surface emittance measurement precision from space. Maintaining the thermal stabilities is quite challenging because the radiometer is located on a spinning platform that can either be in full sunlight or eclipse, and thus exposed to a highly transient environment. Stability requirements were met by integrating a light-weight Expanded Polystyrene (EPS) radome into the design to prevent solar illumination of the feed horn interior. The radome was painted white since the thermo-optical properties of bare sunlit EPS degrade rapidly over the three-year mission. Milling of the EPS and solvent within the white paint created cavities on the EPS surface which may introduce localized hot spots possibly violating the EPS glass transition temperature of 96degC and leading to structural integrity concerns. A three-day thermal test was conducted in a vacuum chamber to verify survivability of the radome during a simulated non-spin fault condition at end of mission. A portable solar simulator illuminated the test article and the beam irradiance was kept nearly constant during the entire 50 hour test, except during the first hour which simulated the expected 79degC on-orbit surface temperature of the radome. The test article survived based on the established pass criteria for three separate metrics: dimensional, optical property, and color. If any hot spots exist locally, they did not cause any observable permanent deformation when compared to pre- and post-test images. The test results increase confidence that there is a high probability that the radome will survive the worst-case scenario of a no-spin fault condition at the end of mission.

Mikhaylov, Rebecca↗
DOE OSTI2023

Organoboron Based Antioxidants

Earth’s environment can be considered especially harsh due to the cyclic exposure of heat, moisture, oxygen, and ultraviolet (UV) and visible light. Polymer-derived materials subjected to these conditions over time often exhibit symptoms of degradation and deterioration, ultimately leading to accelerated material failure. To combat this, chemical additives known as antioxidants are often used to delay the onset of weathering and oxidative degradation. Phenol-derived antioxidants have been used for decades due to their excellent performance and stability; unfortunately, concerns regarding their toxicity and leaching susceptibility have driven researchers to identify novel solutions to replace phenolic antioxidants. Herein, we report on the antioxidant efficacy of organoborons, which have been known to exhibit antioxidant activity in plants and animals. Four different organoboron molecules were formulated into epoxy materials at various concentrations and subsequently cured into thermoset composites. Their antioxidant performance was subsequently analyzed via thermal, colorimetric, and spectroscopic techniques. Generally, thermal degradation and oxidation studies proved inconclusive and ambiguous. However, aging studies performed under thermal and UV-intensive conditions showed moderate to extreme color changes, suggesting poor antioxidant performance of all organoboron additives. Infrared spectroscopic analysis of the UV aged samples showed evidence of severe material oxidation, while the thermally aged samples showed only slight material oxidation. Solvent extraction experiments showed that even moderately high organoboron concentrations show negligible leaching susceptibility, confirming previously reported results. This finding may have benefits in applications where additive leaching may cause degradation to sensitive materials, such as microelectronics and other materials science related areas.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Bulky Cation-Modified Interfaces for Thermally Stable Lead Halide Perovskite Solar Cells

Charged conjugated organic molecules offer promising prospects for reducing nonradiative recombination at interfaces in perovskite solar cells, while protecting the active layer from moisture. However, several studies have shown that the heat induced diffusion of these cations leads to irreversible solar cell degradation. Passivation molecules for perovskite can reconstruct the film surface into lower-dimensional phases when exposed to thermal stress, impeding charge extraction and affecting the photoconversion efficiency (PCE) of devices. In this work, we study how molecular interactions between passivation molecules and 3D CsFAPbI 3 perovskite impact stability and charge extraction at the perovskite/hole transport layer interfaces. Two model π- conjugated molecules are studied: 2-([2,2′-bithiophen]-5-yl)ethan-1-aminium iodide (2TI) and 2-(3‴,4′-dimethyl-[2,2′:5′,2″:5″,2‴- quaterthiophen]-5-yl)ethan-1-ammonium iodide (4TmI). We demonstrate that the speed of surface layer reconstruction under thermal stress can be controlled by the cation size and correlate these structural changes with the solar cell performance and stability. Devices treated with 2TI and 4TmI achieve PCEs over 21% and maintain their performance under thermal stress. Our findings demonstrate that thermal stability in PSCs can be achieved via the design engineering of passivation agents, offering a blueprint for developing next-generation passivation molecules.

36 MATERIALS SCIENCE↗
NASA NTRS2018

Global Freeze/Thaw Product from L-Band Radiometer Data

The NASA Soil Moisture Active Passive (SMAP) mission has been successfully operated for almost three years. The SMAP freeze/thaw algorithm is based on a seasonal threshold approach. It’s important to have a stable and self-consistent freeze and thaw reference that can be applied for multi-year dataset. The three-year long radiometer datasets allow us to reassess the criteria of reference setup and evaluate its stability. In this paper, we first refined the freeze reference requirements and compare three different methods of setting up the thaw reference to minimize the false flags. The original freeze/thaw products is in the polar grid and only cover the region north of 45° N latitude. The limitation is due to lack of enough freezing days in the lower latitude, where the freezing reference cannot be generated. To extend the freeze/thaw product to global region, we combine the single channel algorithm in the lower latitude and southern atmosphere. The global results have been validated through WMO air temperature.

Colliander, Andreas↗
NASA NTRS1983

Residual stresses and their effects in composite laminates

Residual stresses in composite laminates are caused by the anisotropy in expansional properties of constituent unidirectional plies. The effect of these residual stresses on dimensional stability is studied through the warping of unsymmetric (0 sub 4/90 sub 4)sub T graphite/epoxy laminates while their effect on ply failure is analyzed for (0/90)sub 2s Kevlar 49/epoxy laminate. The classical laminated plate theory is used to predict the warping of small and large panels. The change of warping does not indicate a noticeable stress relaxation at 75 C while it is very sensitive to moisture content and hence to environment. A prolonged gellation at the initial cure temperature reduces residual stresses while postcure does not. The matrix/interface cracking in dry (0/90)sub 2s Kevlar 49/epoxy laminate is shown to be the result of the residual stress exceeding the transverse strength.

Hahn, H. T.↗
NASA NTRS2015

A-Train Based Observational Metrics for Model Evaluation in Extratropical Cyclones

Extratropical cyclones contribute most of the precipitation in the midlatitudes, i.e. up to 70 during winter in the northern hemisphere, and can generate flooding, extreme winds, blizzards and have large socio-economic impacts. As such, it is important that general circulation models (GCMs) accurately represent these systems so their evolution in a warming climate can be understood. However, there are still uncertainties on whether warming will increase their frequency of occurrence, their intensity and how much rain or snow they bring. Part of the issue is that models have trouble representing their strength, but models also have biases in the amount of clouds and precipitation they produce. This is caused by potential issues in various aspects of the models: convection, boundary layer, and cloud scheme to only mention a few. In order to pinpoint which aspects of the models need improvement for a better representation of extratropical cyclone precipitation and cloudiness, we will present A-train based observational metrics: cyclone-centered, warm and cold frontal composites of cloud amount and type, precipitation rate and frequency of occurrence. Using the same method to extract similar fields from the model, we will present an evaluation of the GISS-ModelE2 and the IPSL-LMDZ-5B models, based on their AR5 and more recent versions. The AR5 version of the GISS model underestimates cloud cover in extratropical cyclones while the IPSL AR5 version overestimates it. In addition, we will show how the observed CloudSat-CALIPSO cloud vertical distribution across cold fronts changes with moisture amount and cyclone strength, and test if the two models successfully represent these changes. We will also show how CloudSat-CALIPSO derived cloud type (i.e. convective vs. stratiform) evolves across warm fronts as cyclones age, and again how this is represented in the models. Our third process-based analysis concerns cumulus clouds in the post-cold frontal region and how their amount relates to the stability of the boundary layer. This test uses Aqua cloud and vertical atmospheric profiles and when applied to the model output can help assess the accuracy of the convection, boundary layer and cloud scheme.

Convection clouds↗