Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “mobility behavior”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Towards a multiscale approach for understanding irradiation induced swelling and creep in 316 stainless steels - A coupled cluster dynamics and crystal plasticity approach

Structural materials undergo mechanical degradation, in part due to irradiation-induced swelling and creep, under nuclear reactor conditions. While swelling results from the migration and clustering of irradiation-induced atomic-scale mobile defects, the interaction of mesoscale dislocations with these defects causes creep deformation. A coupled crystal plasticity (CP) and mean-field cluster dynamics (CD) approach is presented to investigate the effect of irradiation on the long-term mechanical behavior of 316 stainless steel, which are under consideration for use in nuclear reactors. The temporal evolution of Frenkel pairs and extended defect population, under a chosen irradiation flux and temperature, is predicted using the CD model. The impact of the irradiation defects on the stress state, and the resulting dislocation-mediated inelastic deformation, is modeled concurrently with the CP model. The inelastic deformation is irradiation flux dependent, and early-stage defect evolution determines the later-stage mechanical behavior in 316 stainless steel.

36 - MATERIALS SCIENCE↗
DOE OSTI2021

Particle charge distributions in the effluent of a flow-through atmospheric pressure low temperature plasma

Atmospheric pressure low-temperature plasmas are often utilized to perform particle synthesis, treatment, and removal. It is well-known that dust particles are highly negatively charged in these plasmas; however, little is known about dust particle charging behavior as particles leave the plasma volume and pass through the spatial afterglow region. In this work, monodisperse particles of various sizes and work functions were introduced into an atmospheric pressure radiofrequency capacitively coupled flow-through plasma. Dust particle electrical mobility distributions downstream of the flow-through plasma were measured utilizing a differential mobility analyzer in conjunction with a condensation particle counter at various gas flow velocities. Charge distributions were determined from the measured electrical mobility distributions. Experiments confirm that particles become less negatively charged, and even net-positively charged after leaving the plasma volume, with a distribution that follows a shifted Boltzmann charge distribution. Additionally, particle charge in the effluent of the flow-through plasma is negligibly dependent on work function but highly size and flow velocity dependent. Larger particles were shown to have a higher magnitude of charge under all studied conditions; however, particle polarity was switchable by varying gas flow velocity. The charging dynamics were simulated utilizing a constant number Monte Carlo model that accounts for electron temperature decay and the transition from ambipolar to free diffusion of electrons and ions in the spatial afterglow. Simulation results also suggest that, at the same flow velocity, larger particles obtain a greater magnitude of charge, negative or positive. Furthermore, the decrease in electron mobility and the difference between ion and electron convective loss rates create an ion-rich region in the plasma effluent that promotes ion–particle collisions and drives particle charge removal and even reversal of polarity. Larger particles more favorably collide with energetic species in these environments, which results in higher charge states.

atmospheric pressure low temperature plasma↗
DOE OSTI2025

Resonance-stabilized radical clustering bridges the gap between gaseous precursors and soot in the inception stage

Carbonaceous particles are widespread in combustion, atmospheric, extraterrestrial, and nanomaterials environments. Resonance-stabilized radicals (RSRs) are commonly identified in fuel combustion and pyrolysis processes and play an essential role in carbonaceous particle formation. Despite their importance, comprehensive experimental and mechanistic understanding of particle inception through RSR reactions is lacking. This work investigated particle size distribution, chemical composition, and thermal behavior of soot particles generated by the flow reactor pyrolysis reactions of typical RSRs, in particular, 1-indenyl, 1-methylnaphthyl, and 2-methylnaphthyl radicals, and by the pyrolysis of hydrocarbons with a variety of structures. Particle size distributions show soot particles with mobility diameters in an incipient-particle range of 1.3 to 1.6 nm. Laser desorption/ionization mass spectrometry results suggest that soot products consist of much larger covalently bound clusters (CBCs) than those observed in the gas phase. Under our experimental conditions, the CBCs exhibit a phase transition for particles with calculated molecular diameters of around 1.5 nm. Evaporation experiments and thermogravimetric analysis of the soot products reveal distinct thermal characteristics for small and large CBCs. These results implicate CBCs as bridges between gas-phase species and soot particles. The present work provides a soot-inception mechanism called RSR clustering (RSRC) that is characterized by the reactive clustering of RSRs. The RSRC mechanism contrasts with conventional soot formation models that attribute soot inception primarily to the aggregation of large-size polycyclic aromatic hydrocarbons.

carbonaceous particle↗
DOE OSTI2024

Bubble Mass Transport Measurement in the Large-Scale Test Loops at Oak Ridge National Laboratory

Molten salts are complex fluids that incorporate multi-phase behavior depending on the chemistry and the physical properties of the entrained components. These components include the carrier salt, the actinide fuel, and fission, activation, and corrosion products, the concentrations of which depends on the burnup history of the salt. Radionuclide transport from the salt into the cover gas / off-gas system depends on volatility as predicted by thermochemistry, but data from the Molten Salt Reactor Experiment (MSRE) conducted in the late 1960s suggest that bubble formation and transport are also important. Anomalously high fractions of noble metals were found in the off-gas system and were attributed to transportation with parent salt aerosols and their association with rising noble gas bubbles. The prediction of such phenomena requires coupled neutronic, thermal hydraulic, and chemical equilibrium calculations, the framework of which is being developed within the Nuclear Energy Advanced Modeling and Simulation (NEAMS) program supported by the US Department of Energy (DOE) Office of Nuclear Energy (NE). However, separate effects tests and models of experiments using tools such as SAM and Thermochimica can guide model developers through important processes. Conversely, model development guides the choice of experiments and systems to provide data that are relevant for validation. This report describes several experiments that tracked gas transport in molten salts, ranging from small-scale systems to large-scale loops. Gas transportation in a molten salt, LiCl-KCl, has been studied using the shadowgraph technique. Sensors such as residual gas analysis, Raman spectroscopy, and laser-induced breakdown spectroscopy have been tested for off-gas measurements. These data were used to interpret how the gases move through the upstream salt / cover gas and the interface between them. Differential pressure measurements were able to detect individual gas bubbles as they popped at the liquid–gas interface. Salt aerosols were collected on a cascade impactor. Their formation was also observed directly via the shadowgraph method, and most of these aerosols were launched ballistically into the cover gas. Fine mists could also be observed. Convection currents through the salt were visualized and can be used to calculate the thermophysical properties of the salt itself. The apparatuses described in this report and in a previous work (McFarlane et al. 2023) have been commissioned and are available for use in making further measurements of salt/surrogate fission product behavior. Novel approaches using neutron imaging are planned for the study of fluoride salts, which cannot be contained in quartz, so shadowgraph visualization is not available. Bubble transport in convective flow and in a slow-moving salt column are planned. The mobile laser-induced breakdown spectroscopy (LIBS) system is available for several applications, including iodine capture in a molten hydroxide scrubber, H2 transport though molten salts to complement Raman analysis, and online tracking of salt aerosol generation, transport, and deposition. This report summarizes the findings from FY24 and the plans for FY25. The work completes milestone M2AT-24OR0702013 of the DOE-NE Advanced Reactor Technology, Molten Salt Reactor Campaign, DOE-NE-5.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2026

Interactions Between Climate Policy and Technology-influenced Travel Behavior: Mitigating Induced Demand from CACC

Advances in vehicle technology have influenced the development of automated vehicle systems, where vehicles that do not require human intervention are already deployed in the roadway networks. While these advances are proved to increase roadway safety and highway capacity, more research is needed to understand the long-term and regional-level impacts on mobility, land use, energy consumption, and emissions. This study proposes a multi-model approach to analyze the effect of vehicle automation and deep decarbonization policies over a period from 2020 to 2040 in Austin, Texas. We use the Global Change Analysis Model (GCAM) to develop internally the scenarios that are then passed to the SMART Mobility modeling workflow, a large-scale simulation framework combining the POLARIS activity-based travel demand model and mesoscopic traffic simulator with the Autonomie vehicle energy consumption model and the UrbanSim land use simulator. Results suggest that the introduction of vehicles with advanced automation could increase fuel consumption when no decarbonization policies are implemented. Also, advances in vehicle technology research and development could lead to a decline in energy use in the long-term. Energy pricing and vehicle electrification incentives could help reduce the impact of vehicle automation. Finally, our analysis indicates the relevance of introducing land use processes in longterm vehicle automation studies.

land use↗
DOE OSTI2026

Restoring Symmetry and Enhancing Exchange via Chiral Molecular-Magnetic Hexagons

Modified behaviors of molecules, designed for device or energy applications, can occur due to lattice-molecule incompatibilities in point-group symmetries (PGS), long-range interactions between neighboring molecules, or latticemolecule charge transfer. Such sensitivities are prerequisite for the use of quantum molecules as devices, but removing certain broken symmetries is desirable from the standpoint of simplifying their behaviors. Here, we demonstrate symmetry restoration to molecular-magnetic lattices and show that it leads to strengthened exchange-coupling due to dipolar electrostatic interactions between neighboring molecules and due to manifestations of an earlier identification of a spin-sensitive slightly mobile electron by Hooshmand et al. Starting with a broken symmetry molecular magnet of current interest, we demonstrate a more robust structure composed of six molecular magnets on a h-BN-like surface. The broken point-group symmetry is healed by constructing interpenetrating equilateral triangular structures that are appropriately ratcheted to preserve three-fold rotational symmetry and inversion symmetry.

Pederson, Mark R.↗
DOE OSTI2025

Mechanical response of HFIR-irradiated M5FRAMATOME cladding under simple and complex loading conditions

This study investigates the mechanical behavior of High Flux Isotope Reactor (HFIR) irradiated M5FRAMATOME cladding under simple and complex loading conditions through axial tensile and reversible cyclic bending. Axial tension specimens were pre-machined prior to HFIR irradiation while cyclic bend specimens were inserted as intact tubes. Tests articles were neutron-irradiated to 4 and 16 dpa, and specimens were tested at ORNL's hotcell facilities. The axial tension tests were conducted under constant displacement control, and the reversible cyclic bend tests were performed using ORNL's Cyclic Integrated Reversible-Bending Fatigue Tester (CIRFT) apparatus. Results showed that mechanical response of Cr-coated and uncoated M5FRAMATOME cladding were similar and independent of irradiation dose for axial tension tests, while Cr-coated specimens’ reversible cyclic bend behavior differed from uncoated counterparts. For all tests, irradiation temperature showed a significant impact on the mechanical behavior. Below 280°C, all axial tensile specimens whether coated or not behaved similarly. Above 280°C, YS and UTS showed decrease with increasing irradiation temperature. A similar behavior was also observed in cyclic bend tests as well. The mechanical damage during cyclic bend tests was linked to damage accumulation in unirradiated Cr-coated zircaloy-4 specimens, and the effect of irradiation temperature was related to changing characteristics of defect mobility during high temperature irradiation.

Cinbiz, Nedim [ORNL] (ORCID:0000000346268515)↗
DOE OSTI2022

Valence Disproportionation of GeS in the PbS Matrix Forms Pb 5 Ge 5 S 12 Inclusions with Conduction Band Alignment Leading to High n-Type Thermoelectric Performance

Converting waste heat into useful electricity using solid-state thermoelectrics has a potential for enormous global energy savings. Lead chalcogenides are among the most prominent thermoelectric materials, whose performance decreases with an increase in chalcogen amounts (e.g., PbTe>PbSe>PbS). Herein, we demonstrate the simultaneous optimization of the electrical and thermal transport properties of PbS-based compounds by alloying with GeS. The addition of GeS triggers a complex cascade of beneficial events as follows: Ge 2+ substitution in Pb 2+ and discordant off-center behavior; formation of Pb 5 Ge 5 S 12 as stable second phase inclusions through valence disproportionation of Ge 2+ to Ge0 and Ge 4+ . PbS and Pb 5 Ge 5 S 12 exhibit good conduction band energy alignment that preserves the high electron mobility; the formation of Pb 5 Ge 5 S 12 increases the electron carrier concentration by introducing S vacancies. Sb doping as the electron donor produces a large power factor and low lattice thermal conductivity (κ lat ) of ~0.61 Wm -1 K -1 . The highest performance was obtained for the 14% GeS-alloyed samples, which exhibited an increased room temperature electron mobility of ~121 cm 2 V -1 s -1 for 3 × 10 19 cm -3 carrier density, and a ZT, of 1.32 at 923 K. This is ~ 55% greater that the corresponding Sb-doped PbS sample and is one of the highest reported for the n-type PbS system. Moreover, the average ZT (ZT avg ) of ~0.76 from 400 to 923 K is the highest for PbS-based systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Charge Management for an Inductively Charged On-Demand Battery-Electric Shuttle Service with High Penetration of Renewable Energy

This paper presents a charge management control strategy for an on-demand battery-electric shuttle van operating at the National Renewable Energy Laboratory (NREL) campus and supported by day-time inductive charging at the vehicle's waiting spot. A new control algorithm has been proposed for reducing the demand charge costs incurred from wireless charging of the on-demand shuttle. A custom controller has been developed to monitor the shuttle, wireless charger, renewable energy generation, and various loads at NREL's campus, and regulate charging behavior for demand response. The intermittent renewable generation and sporadic operation of the on-demand shuttle service contribute to a high level of uncertainty in expected campus load profile, which must be carefully managed. The control algorithm predicts energy profile to estimate the mobility needs of the vehicle and maintain uninterrupted service during operation while still minimizing peak demand. The proposed controller has been designed and optimized using a Simulink model for the entire system. Next, it has been implemented and tested in real-time on the NREL campus. Two primary vehicle-use cases, charge sustaining and charge depletion operation, are tested under different load profiles and drive cycles to assess the controller's effectiveness at reducing peak demand and therefore demand charges. The proposed controller showed robust performance under different driving scenarios with high correlation between simulated and experimental data. The results showed that proper demand response can be achieved with an average of 94% reduction of charging loads during peak demand events.

ADVANCED PROPULSION SYSTEMS,ENERGY STORAGE↗
DOE OSTI2026

CyTRICS™ Assessment Report: Whole Home Battery Applications

This report examines the software supply chain security posture of mobile applications developed for consumer whole-house battery and energy-management products. While these applications are not currently integrated with critical infrastructure, their growing role in connected energy domain spaces underscores the importance of understanding the external dependencies, permission structures, and runtime behaviors that could introduce systemic risk; particularly, if adoption expands into more critical environments.

25 ENERGY STORAGE↗
DOE OSTI2022

Unusual electronic transport in (1 - x )Cu 2 Se-( x )CuInSe 2 hierarchical composites

The ability to control the relative density of electronic point defects as well as their energy distribution in semiconductors could afford a systematic modulation of their electronic, optical, and optoelectronic properties. Using a model binary hybrid system Cu 2 Se–CuInSe 2 , we have investigated the correlation between phase composition, microstructure, and electronic transport behavior in the synthesized composites. We found that both Cu 2 Se and CuInSe 2 phases coexist at multiple length scales, ranging from sub-ten nanometer to several micrometers, leading to the formation of a hybrid hierarchical microstructure. Astonishingly, the electronic phase diagram of the (1 - x)Cu 2 Se–(x)CuInSe 2 (15% ≤ x ≤ 100%) hierarchical composites remarkably deviates from the trend normally expected for composites between a heavily doped semiconductor (Cu 2 Se) and a poorly conducting phase (CuInSe 2 ). A sudden 3-fold increase in the electrical conductivity and carrier concentration along with a marginal increase in the carrier mobility is observed for composites at the vicinity of equimolar composition (48% ≤ x ≤ 52%). The carrier concentration increases from ~1.5 × 10 20 cm -3 for the composites with x ≤ 45% to 5.0 × 10 20 cm -3 for x = 50%, and remains constant at 4.5 × 10 20 cm -3 with x value in the range of 52% < x ≤ 90%, then quickly drops to 8 × 10 18 cm -3 for pristine CuInSe 2 phase (x = 100%). The atypical electronic behavior was rationalized in the light of the formation of an inter-band (IB) within the band gap, which arises from the hybridization of native electronic point defects from both Cu 2 Se and CuInSe 2 phases in the resulting hierarchical composites. The result points to a new strategy to modulate the electronic structure of semiconductor composites to maximize interaction and coupling between two fundamentally contrasting properties enabling access to electronic hybrid systems with potential applications as interactive and stimuli-responsive multifunctional materials.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Atomic Diffusion, Segregation, and Grain Boundary Migration in Nickel-Based Alloys from Molecular Dynamics Simulations

Grain boundary diffusion and metal mobility in alloys control material performance in many applications and yet remain poorly understood at a mechanistic level. With advances in accessible time and length scales for computational molecular simulations, and recent force field developments, we now possess tools to help unravel those mechanisms. Using large-scale molecular dynamics simulations, here we examined vacancy-mediated diffusion processes in Ni-5Cr alloy with low and high-energy grain boundaries. We show that atomic diffusion inside the grain boundary plane is about four times higher than bulk diffusion, at any temperature, and exhibits a typical Arrhenius behavior with a very small energy barrier (0~.8 eV for Cr and 0.7 eV for Ni within 1300-1600 K). Additionally, the fastest diffusing species inverts; Cr diffusion was faster than Ni in the bulk but slower in the grain boundaries. This is attributed to the creation of high cohesive energy clusters of Cr at the grain boundary. Grain boundary migration was also observed to be temperature dependent and appears to be two times higher in the 5% Cr alloy than in pure Ni, highlighting the important role of the alloying element on grain boundary motion.

Simonnin, Pauline GN↗
DOE OSTI2023

A Sustainable Multi-Dimensional Printable Material

Polymeric materials are usually tailored for specific functionality. A single polymer exhibiting multiple simultaneous functionalities often requires intricate molecular architecture, which is difficult to manufacture at scale because of its complex synthesis routes. In this work, a facile, partly renewable composition—prepared via reactive melt processing—that induces tunable functionalities such as 3D printability, shape recovery, and self-healing while exhibiting satisfactory mechanical properties is reported. The system with a hydrogen-bonded 3D network consists of thermally reversible nano-scale agglomerates of sustainable, rigid phenolic oligomers and crystallizable flexible polymer. Local molecular mobility and temperature-dependent relaxation and recovery of the non-equilibrium networked states enable exploiting these simultaneous functionalities. Transitions involving solidification and structure stabilization at ambient temperature spanning several hours after preheating only at 70 °C directly contrast typical thermoplastic or thermoplastic elastomer behaviors. Results from this study can inform the design of future rheology modifiers and materials for soft robotics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Diversifying Composition Leads to Hierarchical Composites with Design Flexibility and Structural Fidelity

Although significant progress has been made in the self-assembly of nanostructures, present successes heavily rely on precision in building block design, composition, and pair interactions. These requirements fundamentally limit our ability to synthesize macroscopic materials where the likelihood of impurity inclusion escalates and, more importantly, to access molecular-to-nanoscopic-to-microscopic-to-macroscopic hierarchies, since the types and compositions of building blocks vary at each stage. Inspired by biological blends and high-entropy alloys, we hypothesize that diversifying the blend’s composition can overcome these limitations. Increasing the number of components increases mixing entropy, leading to the dispersion of different components and, as a result, enhances interphase miscibility, weakens the dependence on specific pair interactions, and enables long-range cooperativity. This hypothesis is validated in complex blends containing small molecules, block copolymer-based supramolecules, and nanoparticles/colloidal particles. Hierarchically structured composites can be obtained with formulation flexibility in the filler selection and blend composition. It is worth noting that, by adding small molecules, we can solve the size constraint that plagues traditional block copolymer/nanoparticle blends. Detailed characterization and simulation further confirm that each component is distributed to locally mediate unfavorable interactions, cooperatively mitigate composition fluctuations, and retain structural fidelity. Furthermore, the blends have sufficient mobility to access tunable microstructures without compromising the order of the nanostructure. Besides establishing a kinetically viable pathway to release current constraints in the composite design and to navigate uncertainties during structure formation over multiple length scales, the present study demonstrates that entropy-driven behaviors can be realized in systems beyond high-entropy alloys despite inherent differences between metal alloys and organic/inorganic hybrids.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Impact of cycling conditions on lithium-ion battery performance for electric vertical takeoff and landing applications

The development of better electrochemical energy storage systems has sparked significant interest in using Li-ion batteries for electric vertical takeoff and landing (eVTOL) applications. To ensure the optimal performance and safety of onboard batteries, their behavior under different charging/discharging protocols and environmental conditions must be understood. Here, this paper presents a comprehensive evaluation of commercial Li-ion batteries for eVTOL applications, focusing on their responses to varying charging/discharging strategies and mechanical vibrations experienced during flight. Through controlled experiments, the effects of rapid cycling on battery performance were investigated, including effects on lifespan, capacity, and internal resistance. Additionally, the impact of mechanical vibrations on battery behavior was assessed to identify potential challenges for onboard batteries. The results of this study revealed intriguing insights into the interplay between temperature, vibration, and battery performance. This work contributes to the broader adoption of electric aerial transportation, promising a greener and safer future for urban mobility.

18650 cells↗
DOE OSTI2022

Topological Materials with Complex Long-Range Order

The overarching vision of this proposal is to understand exotic metallic behavior in frustrated quantum magnets. This problem is at the core of understanding a number of mysteries in the study of itinerant magnetism, and of high temperature superconductivity. The central challenge is that magnetic order is generally understood by localized magnetic moments. In these systems the mobile electrons form an ordered magnetic state, sometime breaking sharp symmetry, sometimes forming incommensurate order, and other times forming a spin liquid. The present research focuses on finding complex magnets that are in close proximity to a sea of metallic, itinerant electrons.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Fluid and hybrid simulations of the ionization instabilities in Hall thruster

Low-frequency axial oscillations in the range of 5–50 kHz stand out as a pervasive feature observed in many types of Hall thrusters. While it is widely recognized that the ionization effects play the central role in this mode, as manifested via the large-scale oscillations of neutral and plasma density, the exact mechanism(s) of the instabilities remain unclear. To gain further insight into the physics of the breathing mode and evaluate the role of kinetic effects, a one-dimensional time-dependent full nonlinear low-frequency model describing neutral atoms, ions, and electrons is developed in full fluid formulation and compared to the hybrid model in which the ions and neutrals are kinetic. Both models are quasi-neutral and share the same electron fluid equations that include the electron diffusion, mobility across the magnetic field, and the electron energy evolution. The ionization models are also similar in both approaches. Further, the predictions of fluid and hybrid simulations are compared for different test cases. Two main regimes are identified in both models: one with pure low-frequency behavior and the other one, where the low-frequency oscillations coexist with high-frequency oscillations in the range of 100–200 kHz, with the characteristic time scale of the ion channel fly-by time, 100–200 kHz. The other test case demonstrates the effect of a finite temperature of injected neutral atoms, which has a substantial suppression effect on the oscillation amplitude.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗