Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “minimum loss”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Power Controller

The device called the Power Factor Controller (PFC) offers exceptional energy conservation potential by virtue of its ability to sense shifts in the relationship between voltage and current flow, and to match them with the motor's need. Originating from the solar heating/cooling program, the PFC senses a light load, it cuts the voltage level to the minimum needed which in turn reduces current flow and heat loss. Laboratory tests showed that the PFC could reduce power used by six to eight percent under normal motor loads, and as much as 65 percent when the motor was idling. Over 150 companies have been granted NASA licenses for commercial use of this technology. One system that utilizes this technology is the Vectrol Energy System, (VES) produced by Vectrol, Inc. a subsidiary of Westinghouse. The VES is being used at Woodward & Lothrop, on their escalators. Energy use is regulated according to how many people are on the escalator at any time. It is estimated that the energy savings are between 30 to 40 percent.

Source record↗

Ar-Ar Dating of Martian Meteorite, Dhofar 378: An Early Shock Event?

Martian meteorite, Dhofar 378 (Dho378) is a basaltic shergottite from Oman, weighing 15 g, and possessing a black fusion crust. Chemical similarities between Dho378 and the Los Angeles 001 shergottite suggests that they might have derived from the same Mars locale. The plagioclase in other shergottites has been converted to maskelenite by shock, but Dho378 apparently experienced even more intense shock heating, estimated at 55-75 GPa. Dho378 feldspar (approximately 43 modal %) melted, partially flowed and vesiculated, and then partially recrystallized. Areas of feldspathic glass are appreciably enriched in K, whereas individual plagioclases show a range in the Or/An ratio of approximately 0.18-0.017. Radiometric dating of martian shergottites indicate variable formation times of ~160-475 Myr, whereas cosmic ray exposure (CRE) ages of shergottites indicate most were ejected from Mars within the past few Myr. Most determined Ar-39-Ar-40 ages of shergottites appear older than other radiometric ages because of the presence of large amounts of martian atmosphere or interior Ar-40. Among all types of meteorites and returned lunar rocks, the impact event that initiated the CRE age very rarely reset the Ar-Ar age. This is because a minimum time and temperature is required to facilitate Ar diffusion loss. It is generally assumed that the shock-texture characteristics in martian meteorites were produced by the impact events that ejected the rocks from Mars, although the time of these shock events (as opposed to CRE ages) are not directly dated. Here we report Ar-39-Ar-40 dating of Dho378 plagioclase. We suggest that the determined age dates the intense shock heating event this meteorite experienced, but that it was not the impact that initiated the CRE age.

Park, J.↗

A Symmetric Time-Varying Cluster Rate of Descent Model

A model of the time-varying rate of descent of the Orion vehicle was developed based on the observed correlation between canopy projected area and drag coefficient. This initial version of the model assumes cluster symmetry and only varies the vertical component of velocity. The cluster fly-out angle is modeled as a series of sine waves based on flight test data. The projected area of each canopy is synchronized with the primary fly-out angle mode. The sudden loss of projected area during canopy collisions is modeled at minimum fly-out angles, leading to brief increases in rate of descent. The cluster geometry is converted to drag coefficient using empirically derived constants. A more complete model is under development, which computes the aerodynamic response of each canopy to its local incidence angle.

Ray, Eric S.↗

EFFECTS OF ROTATION ON THE MINIMUM MASS OF PRIMORDIAL PROGENITORS OF PAIR-INSTABILITY SUPERNOVAE

The issue of which stars may reach the conditions of electron/positron pair-formation instability is of importance to understand the final evolution both of the first stars and of contemporary stars. The criterion to enter the pair-instability regime in density and temperature is basically controlled by the mass of the oxygen core. The main-sequence masses that produce a given oxygen core mass are, in turn, dependent on metallicity, mass loss, and convective and rotationally induced mixing. We examine the evolution of massive stars to determine the minimum main-sequence mass that can encounter pair-instability effects, either a pulsational pair-instability supernova (PPISN) or a full-fledged pair-instability supernova (PISN). We concentrate on zero-metallicity stars with no mass-loss subject to the Schwarzschild criterion for convective instability, but also explore solar metallicity and mass loss and the Ledoux criterion. As expected, for sufficiently strong rotationally induced mixing, the minimum main-sequence mass is encountered for conditions that induce effectively homogeneous evolution such that the original mass is converted almost entirely to helium and then to oxygen. For this case, we find that the minimum main-sequence mass is about 40 M{sub Sun} to encounter PPISN and about 65 M{sub Sun} to encounter a PISN. The implications of these results for the first stars and for contemporary supernovae are discussed.

79 ASTRONOMY AND ASTROPHYSICS↗

An Investigation of Low Earth Orbit Internal Charging

Low Earth orbit is usually considered a relatively benign environment for internal charging threats due to the low flux of penetrating electrons with energies of a few MeV that are encountered over an orbit. There are configurations, however, where insulators and ungrounded conductors used on the outside of a spacecraft hull may charge when exposed to much lower energy electrons of some 100's keV in a process that is better characterized as internal charging than surface charging. For example, the minimal radiation shielding afforded by thin thermal control materials such as metalized polymer sheets (e.g., aluminized Kapton or Mylar) and multilayer insulation may allow electrons of 100's of keV to charge underlying materials. Yet these same thermal control materials protect the underlying insulators and ungrounded conductors from surface charging currents due to electrons and ions at energies less than a few keV as well as suppress the photoemission, secondary electron, and backscattered electron processes associated with surface charging. We investigate the conditions required for this low Earth orbit "internal charging" to occur and evaluate the environments for which the process may be a threat to spacecraft. First, we describe a simple one-dimensional internal charging model that is used to compute the charge accumulation on materials under thin shielding. Only the electron flux that penetrates exposed surface shielding material is considered and we treat the charge balance in underlying insulation as a parallel plate capacitor accumulating charge from the penetrating electron flux and losing charge due to conduction to a ground plane. Charge dissipation due to conduction can be neglected to consider the effects of charging an ungrounded conductor. In both cases, the potential and electric field is computed as a function of time. An additional charge loss process is introduced due to an electrostatic discharge current when the electric field reaches a prescribed breakdown strength. For simplicity, the amount of charge lost in the discharge is treated as a random percentage of the total charge between a set maximum and minimum amount so a user can consider partial discharges of insulating materials (small loss of charge) or arcing from a conductor (large loss of charge). We apply the model to electron flux measurements from the NOAA-19 spacecraft to demonstrate that charging can reach levels where electrostatic discharges occur and estimate the magnitude of the discharge.

NeergaardParker, Linda↗

Wellbore Stability and Mud Loss Management in Geothermal Drilling: Optimizing Mud Weight to Mitigate Tensile Wellbore Fracturing at The Geysers, California

As part of a U.S. Department of Energy (DOE) Geothermal Technologies Office-funded initiative, Geysers Power Company, LLC, a subsidiary of Calpine Corporation, has been working to enhance drilling performance at the world’s largest geothermal field, The Geysers, in northern California. In a recent drilling operation of the GDC-36 well, excessive mud losses were encountered, initially addressed through repeated but largely ineffective cement plugging. Ultimately, the most effective strategy was to drill blind through the loss zones, made feasible by the high rate of penetration (ROP) achieved with PDC bits, allowing significant progress before the mud tanks were depleted and water-sensitive argillic formation layers could collapse. In response to these challenges, the project team explored alternative methods to minimize downtime and risks associated with cement plugging and continuous mud loss and to contemplate the driving mechanisms for the losses. Wellbore imaging using Formation MicroImager (FMI) and Ultrasonic Borehole Imager (UBI) tools revealed longitudinal tensile fractures, which were attributed to mud weights exceeding the minimum circumferential stress resulting from the native stress field and formation pressure. This study examines the mud losses encountered and leverages wellbore imaging data to understand the mechanisms behind mud induced tensile fracturing in specific rock facies. Understanding fracture behavior across different lithologies is crucial, as fractures within the reservoir can enhance steam migration throughout the system. The reservoir at The Geysers lies within the Mesozoic Franciscan Assemblage, a tectonic mélange formed by subduction. It consists of metamorphosed turbidite sandstone (greywacke) and mudstone (argillite), oceanic upper crust (including greenstone and chert), and serpentinized ultramafic rocks - each exhibiting distinct geomechanical fracturing properties. The structural fabric of the Franciscan Assemblage was shaped by low-angle Mesozoic thrust faulting and later overprinted by sub-vertical strike-slip structures related to the Pacific-North American plate boundary. A wellbore stability model was developed using core measurements and logs to simulate fracturing scenarios during drilling under varying stress conditions. These simulations guided the development of an optimized mud weight management strategy that should enable adaptive adjustments during drilling, reducing the likelihood of tensile fracturing and mud losses, ultimately improving operational efficiency.

15 GEOTHERMAL ENERGY↗

Effects of neoclassical tearing modes and toroidal field ripple on lost alpha power in the SPARC tokamak

Here, using the SPIRAL Monte Carlo, full particle-orbit simulation code, we investigate the effects of neoclassical tearing modes (NTMs) and toroidal field (TF) ripple on alpha power losses during steady-state operation of the SPARC primary reference discharge. Model perturbations for TF ripple and the $m/n = 2/1$ and $3/2$ NTMs with exaggerated widths selected based on an H-mode plasma approaching thermal quench are added to a simulated SPARC magnetic equilibrium through which marker particles are tracked. The 3/2 and 2/1 NTMs are located at $\rho_{\mathrm{pol}} \sim 0.76$ and $\rho_\mathrm{pol} \sim 0.86$ respectively, well positioned to increase alpha particle transport into and within an outer lossy region of the plasma beyond $\rho_\mathrm{pol} \sim 0.8$ where over 95% of lost alpha particles are born. Total alpha power losses are shown to increase modestly from 1.73% lost at a minimum to 2.34% lost at a maximum, and alpha particle surface power densities form localized hotspots on the first-wall near the low-field side midplane due to NTMs and TF ripple. We establish a conservative upper limit for first-wall alpha surface power densities on a toroidally symmetric wall for typical, flattop operation and motivate the consideration of NTMs in the design of three dimensional limiter surfaces for SPARC.

alpha power losses↗

Scaling law of electron confinement in a zero beta polywell device

Orbital theory simulation was applied to an electron trap that uses a cube shaped magnetic cusp known as a Polywell device. The purpose of this device is to create a virtual cathode in order to achieve nuclear fusion using inertial electrostatic confinement. Analytical expressions of the electron confinement time and average position within the device were obtained in terms of the current in the field coils, the dimensions of the device, and the kinetic energy of the electrons. Comparisons with numerical simulations showed good agreement over a parameter range that spanned several orders of magnitude for the current. In addition, power loss from electrons exiting the trap was estimated in order to obtain minimum power requirement to maintain a virtual cathode within the device.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Collective Analysis of Alpha Particle Losses Due to Self-Absorption by Mass Loading on Radioactive Particulate Glass Fiber Filters

In this study, we derived a relationship between filter mass loading and the percent loss during analysis using the mass loading data collected from six previous studies of self-absorption. Components of mass loading include particulate dust, radioactive particulates, and filter material. In a research report published in 1984, Higby calculated a minimum burial depth for an alpha particle to be lost due to absorption (100% loss) of about 3.7 mg/cm 2 based on calculations for the range of 239-Pu alpha particles in glass fiber filters. From there, Higby concluded that a correction factor of 0.85 assumes approximately 15% losses in the count rate of both alpha and beta particles. In 2000, Luetzelschwab et al. recommended assuming a 40% loss at a loading of 3.3 mg/cm 2 and a 28% loss for a loading of 2.3 mg/cm 2 which included the frontal face mass of the filter. More recently, the 100% losses due to absorption were reported to be in the 10 mg/cm 2 range. Presented here is a trinomial relationship method of relating percent loss due to self-absorption to filter mass loading, based on data reported by Higby, Luetzelschwab et al., Huang et al., Barnett et al., Smith et al., and Hogue et al. Under normal operating conditions at the stacks monitored by Effluent Management, the mass loading of sample filters averages 0.09 ± 0.12 (2s) mg/cm 2 (excluding negative values and outliers) and ranges from 0 mg/cm 2 to 0.24 mg/cm 2 . Based on current mass loading results for Effluent Management stack sample filters, the forced-zero trinomial relationship method estimated self-absorption losses of less than 5%. Because American National Standards Institute/Health Physics Society N13.1-2011 guidelines indicate a correction factor should be used when the penetration of radioactive material into the collection media or self-absorption of radiation by the material collected would reduce the count rate by more than 5%, it is possible continued application of a correction factor to the Effluent Management stack samples is no longer necessary. Nevertheless, continuing to assign a correction factor at the 5% threshold (i.e., 0.95) would be a conservative approach.

36 MATERIALS SCIENCE↗

Radial diffusion and losses of energetic protons in the 5 to 12 R(S) region of Saturn's magnetosphere

Phase space density profiles for nearly equatorial mirroring energetic protons, derived from Pioneer 11 measurements during the 1979 Saturn encounter, were analyzed using solutions of the time-averaged radial diffusion equation in a dipolar planetary magnetic field. Then, several loss models were considered, ranging from a model that takes into account satellite absorption only to the one that accounts for satellite plus ring-E absorption plus added distributed losses, and the corresponding form of the time-averaged radial diffusion coefficient was determined for each case by a minimum-variance fit to the data-derived phase space densiy profiles. The model comparisons clearly indicated the need for distributed losses, in addition to satellite absorption, in order to explain the smooth decline of the experimental energetic proton phase space density profiles in the 5-12-Saturn radius region of Saturn's magnetosphere.

Hood, L. L.↗

Optimal paths through downbursts

The control of an aircraft's takeoff path through a downburst is presently formulated as a dynamic optimization problem with minimum-altitude constraint and two different performance measures; a landing path through a downburst is also discussed. Paths are determined which, in addition to maximizing an airspeed/altitude combination immediately after downburst penetration, minimize deviation from the intended flight path. For mild-to-moderate downbursts, the performance strategy maintains altitude at the expense of airspeed loss, while the survival strategy involves a descent of the aircraft to the minimum altitude in order to obtain greater airspeed. For a severe downburst, both optimal paths maintain minimum altitude.

Zhao, Yiyuan↗

Low-loss and energy efficient modulation in silicon photonic waveguides by adiabatic elimination scheme

High-speed Silicon Photonics calls for solutions providing a small footprint, high density, and minimum crosstalk, as exemplified by the recent development of integrated optical modulators. Yet, the performances of such modulators are hindered by intrinsic material losses, which results in low energy efficiency. Using the concept of Adiabatic Elimination, here, we introduce a scheme allowing for the low-loss modulation in densely packed waveguides. Our system is composed of two waveguides, whose coupling is mediated by an intermediate third waveguide. The signal is carried by the two outer modes, while the active control of their coupling is achieved via the intermediate dark mode. The modulation is performed by the manipulation of the central-waveguide mode index, leaving the signal-carrying waveguides unaffected by the loss. We discuss how Adiabatic Elimination provides a solution for mitigating signal losses and designing relatively compact, broadband, and energy-efficient integrated optical modulators.

14 SOLAR ENERGY↗

Low ozone amounts during 1992 - 1993 from Nimbus 7 and Meteor 3 total ozone mapping spectrometers

The global distribution of ozone during the October 31, 1978, to May 6, 1993, observing lifetime of the Nimbus 7 total ozone mapping spectrometer (TOMS) is described, with emphasis on the low ozone amounts observed during 1992 and 1993. Ozone amount time series are extended beyong May 6, 1993, to the end of July 1993 using preliminary Meteor 3 TOMS data. Time series for zonally averaged ozone amounts show that there has not been a significant shift in the seasonal patterns of ozone maxima and minima caused by the Mount Pinatubo eruption or by the onset of very low ozone values during 1992 and 1993. There has been a relatively slow, nearly linear decrease in the amount of ozone over the entire globe from 1979 to the end of 1991, with rates ranging from no change at the equator to a 4 - 6% decrease per decade at midlatitudes and a 10 - 12% decrease per decade at higher latitudes. After the eruption of Mount Pinatubo during June 1991, the ozone amount decreased in the equatorial latitudes (10 deg S to 10 deg N) for about 6 months (-10 Dobson units (DU) between 0 deg and 10 deg S and -3 DU between 0 deg and 10 deg N). During 1992 and continuing into 1993, the rate of ozone decrease deviated from the previously linear trend with the onset of changes that were large in comparison with the historical range of ozone values from 1979 to 1991. The first of the large decreases in ozone amount occurred earlier, in February 1990 to May 1990, at 50 deg - 70 deg N. At high northern latitudes, the 1993 decreased ozone amounts were about 12.5% below the envelope of historical values; at midlatitudes they were about 7% lower; and at low latitudes they were about 4% lower. Area-weighted averages in the northern and southern hemispheres show that most of the 1992 - 1993 ozone losses have occurred in the northern hemisphere. The 1993 global average (70 deg S to 70 deg N) ozone amount is 3% below the 1979 to 1991 minimum, 5% below the historical envelope in the northern hemisphere, and near the lower boundary of the historical envelope in the southern hemisphere. In the 70 deg - 60 deg S latitude band, the ozone losses between 1979 and 1993 have reduced the annual minimum amount to values below those seen in the equatorial regions.

Herman, J. R.↗

Techno-economic and life-cycle analysis of strategies for improving operability and biomass quality in catalytic fast pyrolysis of forest residues

Many of the challenges faced by the first commercial biorefineries were associated with feedstock handling, quality, and cost. Strategies are needed to enable further expansion of biorefineries and meet the growing demand for bio-based fuels and products. Here, we examine 2 key feedstock challenges and mitigation strategies in the context of a catalytic fast pyrolysis (CFP) biorefinery: (1) the operability of the feed system, which may be improved by modifying the minimum particle size fed to the reactor, and (2) the quality of the biomass, which may be improved by employing air classification to remove undesirable material and increase fuel yields. We conduct techno-economic analysis (TEA) and life-cycle analysis for these strategies, employing a discrete event simulation model for biomass preprocessing combined with a series of correlations developed from literature data and a rigorous CFP conversion model. Our results highlight the importance of balancing increased cost and material losses from preprocessing against improved operability and fuel yields. Economics and sustainability were optimized when operating at the lowest minimum particle size, emphasizing the importance of minimizing material losses while maintaining the operability of the process. Economically, additional costs and material losses from air classification could be acceptable due to improved biomass conversion, and an optimum air classification speed was identified; however, the fuel GHG emissions were minimized when air classification was not used. Valorizing material removed during preprocessing as a coproduct could improve economics and sustainability, decreasing the burden of material losses.

09 - BIOMASS FUELS↗

Age, circadian rhythms, and sleep loss in flight crews

Age-related changes in trip-induced sleep loss, personality, and the preduty temperature rhythm were analyzed in crews from various flight operations. Eveningness decreased with age. The minimum of the baseline temperature rhythm occurred earlier with age. The amplitude of the baseline temperature rhythm declined with age. Average daily percentage sleep loss during trips increased with age. Among crewmembers flying longhaul flight operations, subjects aged 50-60 averaged 3.5 times more sleep loss per day than subjects aged 20-30. These studies support previous findings that evening types and subjects with later peaking temperature rhythms adapt better to shift work and time zone changes. Age and circadian type may be important considerations for duty schedules and fatigue countermeasures.

Gander, Philippa H.↗

Photoinduced Electron-Transfer Distance Is Controlled by the Driving Force in Solid-State Organic Donor-Acceptor Systems

Understanding how short-range electron transfer generates photocurrent in organic solar cells and what photochemical driving force is needed to maximize efficiencies has been an immensely difficult problem. Here we show how these questions are intertwined: the driving force controls the average charge-transfer distance, skipping the shortest-range states in the optimal case. Using photoinduced absorption-detected magnetic resonance, we measure average charge-separation distances in dilute donor–acceptor blends as a function of driving force, and compare these with free charge yields measured by time-resolved microwave conductivity. We find that the largest driving forces show the shortest charge-separation distances, explaining their suppressed free-carrier generation. These results support a long-range electron-transfer model, wherein the driving force controls the initial delocalization of the electron–hole pair. The minimum driving force required for efficient charge separation (and minimal voltage losses) is ultimately set by the dielectric constant of the material.

14 SOLAR ENERGY↗

Irradiation and measurements of fluorinated ethylene-propylene-A on silicon solar cells in vacuum

Silicon monoxide (SiO) coated silicon solar cells covered with fluorinated ethylene-propylene-A (FEP-A) were irradiated by 1-MeV electrons in vacuum. The effect of irradiation on the light transmittance of FEP-A was checked by measuring the short-circuit current of the cells while in vacuum after each dose increment, immediately after the irradiation, and again after a minimum elapsed time of 16 hr. The results indicated no apparent loss in transmission due to irradiation of FEP-A and no delamination from the SiO surface while the cells were in vacuum, but embrittlement of FEP-A occurred at the accumulated dose.

Marsik, S. J.↗

On the optimality of the MAP estimation loop for carrier phase tracking BPSK and QPSK signals

Starting with MAP estimation theory as a basis for optimally estimating carrier phase of BPSK and QPSK modulations, it is shown in this paper that the closed loop phase trackers, which are motivated by this approach, are indeed closed loop optimum in the minimum mean-square phase tracking jitter sense. The corresponding squaring loss performance of these so-called MAP estimation loops is compared with that of more practical implementations wherein the hyperbolic tangent nonlinearity is approximated by simpler functions.

Simon, M. K.↗