SEARCH · Engineering Papers
Results for “membrane separation”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Microporous Crystalline Molecular Sieve Membranes for Molecular Gas Separations: What Is Next?
Not provided.
Hydrophilic microporous membranes for selective ion separation and flow-battery energy storage
Abstract not provided
Process systems engineering enables efficient and sustainable membrane-based critical material separations
This presentation summarizes work completed over the past year for PrOMMiS Task 2.1. The first half of the preseation motivates the need to develop sustainable critical mineral separation technology, and how PSE is particularly well-suited to tackle this problem. The second half of the presentation presents preliminary results for the custom cost model for diafiltration (2.1) using the superstructure flowsheet developed by Carnegie Mellon University. The presentation serves to emphasize the multi-disciplinary and collaborate nature of developing a circular economy of critical minerals and materials.
Chemical Sensing and Chemoresponsive Pumping with Conical-Pore Polymeric Membranes
Synthetic membranes containing asymmetrically shaped pores have been shown to rectify the ionic current flowing through the membrane. Ion-current rectification means that such membranes produce nonlinear current–voltage curves analogous to those observed with solid-state diode rectifiers. In order to observe this ion-current rectification phenomenon, the asymmetrically shaped pores must have pore-wall surface charge. Pore-wall surface charge also allows for electroosmotic flow (EOF) to occur through the membrane. We have shown that, because ion-current is rectified, EOF is likewise rectified in such membranes. This means that flow through the membrane depends on the polarity of the voltage applied across the membrane, one polarity producing a higher, and the opposite producing a lower, flow rate. As is reviewed here, these ion-current and EOF rectification phenomena are being used to develop new sensing technologies. Results obtained from an ion-current-based sensor for hydrophobic cations are reviewed. In addition, ion-current and EOF rectification can be combined to make a new type of device—a chemoresponsive nanofluidic pump. This is a pump that either turns flow on or turns flow off, when a specific chemical species is detected. Results from a prototype Pb 2+ chemoresponsive pump are also reviewed here.
OxyCycle Membrane for High Purity Separation from Air - Final Technical Report
Explore the source record for details and available documents.
Effect of Amine Content on the CO2 Separation Performance of Polyvinylamine Membranes for Flue Gas Carbon Capture
American Chemical Society National Meeting, Virtual, August 22-26, 2021
Advanced Membranes for Selective Ion/Molecular Separation and Bio-electrochemical Conversion
IMSTEC 2022, Melbourne, Australia, December 4-8, 2022
Effect of Amine Content on the CO2 Separation Performance of Polyvinylamine Membranes for Flue Gas Carbon Capture
The North American Membrane Society (NAMS) 32nd Annual Meeting, Tuscaloosa, AL, May 14-17, 2023
High Selectivity and Throughput Carbon Molecular Sieve Hollow Fiber Membrane-Based Modular Air Separation Unit for Producing High Purity O2
Explore the source record for details and available documents.
Investigation of competitive sorption and plasticization of hyperaged CANAL ladder polymers for acid gas purification
Identifying membrane materials that have exceptional separation performance and stability to complex CO 2 -containing mixtures is a pressing topic in separation science. In this work, the membrane separation performance for a recently discovered class of contorted polymers synthesized via catalytic arene-norbornene annulation (CANAL) polymerization is presented. These CANAL polymers achieve high CO 2 /CH 4 selectivity of 68 after physical aging (up to ∼1 year), which significantly augments the size-sieving capabilities of the membranes. Binary CO 2 /CH 4 and ternary H 2 S/CO 2 /CH 4 testing result in a 41 % and 50 % enhancement in selectivities, respectively, for hyperaged (∼1 year) contorted CANAL polymers, highlighting their size-sieving capabilities. The remarkably high CO 2 /CH 4 mixed-gas and combined acid gas (CAG, (CO 2 +H 2 S)/CH 4 ) selectivities of 88 and 95, respectively, for CANAL-Me-S 5 F in particular surpass both the 2018 CO 2 /CH 4 mixed-gas and CAG upper bounds. Performance stability was also investigated for high concentrations of CO 2 , revealing a reduction in CO 2 /CH 4 mixed-gas selectivity without compromising CO 2 permeability, suggesting strong sorption of CO 2 but minimal plasticization effects for short testing periods. In addition, time-dependent plasticization shows negligible effects on CO 2 /CH 4 mixed-gas selectivity despite an increase in CO 2 permeability when exposed to high concentrations of plasticizing CO 2 over an extended period of 170 h. This study provides valuable insights into hyperaged CANAL polymers and their performance in practical industrial processes.
Continuous Ion Separations by Insertion Processes
Humanity is reliant on many important chemical separations which are performed daily at the industrial scale. With a historical dependence on thermal distillation techniques, which require large amounts of energy, chemical separations account for 10-15% of energy consumption worldwide. Membrane-based alternatives mitigate separation energy demand, yet prove challenging to scale-up and possess intrinsic limitations. Membranes usually separate species based on size and charge exclusion mechanisms. Importantly, however, improvements in the selectivity of membranes almost always leads to lower permeability. Much of the fundamental research in the field of membrane separations is focused on breaking the scaling relationship between selectivity and permeance, and improving membrane lifetime and stability. As discussed next, our group is developing electrochemically active membranes that can be actuated by application of an electric field. The long-term goal is to control selectivity and permeance.
Broadening the Gas Separation Utility of Monolayer Nanoporous Graphene Membranes by an Ionic Liquid Gating
Ultrathin two-dimensional (2D) monolayer atomic crystal materials offer great potential for extending the field of novel separation technology due to their infinitesimal thickness and mechanical strength. One difficult and ongoing challenge is to perforate the 2D monolayer material with subnanometer pores with atomic precision for sieving similarly sized molecules. Here, we demonstrate the exceptional separation performance of ionic liquid (IL)/graphene hybrid membranes for challenging separation of CO 2 and N 2 . Notably, the ultrathin ILs afford dynamic tuning of the size and chemical affinity of nanopores while preserving the high permeance of the monolayer nanoporous graphene membranes. The hybrid membrane yields a high CO 2 permeance of 4000 GPU and an outstanding CO 2 /N 2 selectivity up to 32. Finally, this rational hybrid design provides a universal direction for broadening gas separation capability of atomically thin nanoporous membranes.
Novel Membrane and Electrodeposition-Based Separation and Recovery of Rare Earth Elements from Coal Combustion Residues (Final Report)
This project developed a hydrometallurgical-based technology to extract and concentrate rare earth elements (REEs) from a representative group of coal combustion residuals (CCRs) from major coal sources in the United States. The approach for REE recovery comprises two general components: (1) Leaching of REEs from CCRs and (2) Separation of REEs from other major ions in the CCR leachate. The leaching step entails acid leaching with nitric or hydrochloric acid, and in some cases, pretreatment of CCRs with alkaline roasting prior to acid leaching. The follow-up REE recovery steps involve a series of membrane-based methods to separate and concentrate rare earth ions from other major ions in acid leachates of CCRs. These methods include liquid emulsion membranes, supported liquid membranes and electrodeposition with carbon nanotube electrochemical filters. The advantage of these separation approaches (relative to conventional approaches such as solvent extraction) is a reduction in the usage of solvents and other costly chemicals and a reduction of hazardous waste products that are challenges in conventional REE separation methods. In the testing of our process, we selected a representative set of CCR samples from our collection and performed a suite of characterization measurements (total REE content and major mineralogy). The major results of this work demonstrated that heated acid leaching could efficiently extract REEs from PRB-based coal fly ashes while the Appalachian and Illinois Basin CCRs required alkaline roasting with NaOH prior to acid leaching at room temperature. The supported liquid membrane (SLM) configuration and electrochemical deposition (ED) system yielded the most promising methods of REE recovery from the acid leachates of fly ash. Our most concentrated product to date comprised 1 wt.% (dry basis) REEs produced from an Appalachian-based fly ash leached and purified by SLM. The SLM separation process was more selective for heavy REEs over the light REEs. When SLM was combined with ED, preliminary results demonstrated that a final product of >2 wt.% REEs was possible.
Correlating Interlayer Spacing and Separation Capability of Graphene Oxide Membranes in Organic Solvents
Membranes synthesized by stacking two-dimensional graphene oxide (GO) hold great promise for applications in organic solvent nanofiltration. However, the performance of a layer-stacked GO membrane in organic solvent nanofiltration can be significantly affected by its swelling and interlayer spacing, which have not been systematically characterized. In this study, the interlayer spacing of the layer-stacked GO membrane in different organic solvents was experimentally characterized by liquid-phase ellipsometry. To understand the swelling mechanism, the solubility parameters of GO were experimentally determined and used to mathematically predict the Hansen solubility distance between GO and solvents, which is found to be a good predictor for GO swelling and interlayer spacing. Solvents with a small solubility distance (e.g., dimethylformamide, N-methyl-2-pyrrolidone) tend to cause significant GO swelling, resulting in an interlayer spacing of up to 2.7 nm. Solvents with a solubility distance larger than 9.5 (e.g., ethanol, acetone, hexane, and toluene) only cause minor swelling and are thus able to maintain an interlayer spacing of around 1 nm. Correspondingly, GO membranes in solvents with a large solubility distance exhibit good separation performance, for example, rejection of more than 90% of the small organic dye molecules (e.g., rhodamine B and methylene blue) in ethanol and acetone. Additionally, solvents with a large solubility distance result in a high slip velocity in GO channels and thus high solvent flux through the GO membrane. Finally, the GO membrane performs better in solvents that are unlike GO, i.e., solvents with large solubility distance.
Bicarbonate-Carbonate Selectivity through Nanofiltration for Direct Air Capture of Carbon Dioxide
Direct air capture (DAC) of carbon dioxide is one approach among many proposed that is capable of offsetting hard-to-avoid emissions. In previous work, we developed the alkalinity concentration swing (ACS) method, which is driven through concentrating an alkaline solution that has been loaded with atmospheric CO 2 by desalination technologies, such as reverse osmosis or capacitive deionization. Though the ACS is promising in terms of energy usage and implementation, its absorption rate and water requirements are infeasible for a large-scale DAC process. Here, we propose an improvement on the ACS, the bicarbonate-enriched alkalinity concentration swing (BE-ACS), which selects bicarbonate ions from a stream of aqueous alkaline solution that has absorbed atmospheric CO 2 . The bicarbonate-rich stream is then concentrated, which greatly increases its CO 2 partial pressure, and then CO 2 is extracted from solution. We experimentally investigate the use of pressure-driven nanofiltration (NF) membrane-based separation to select bicarbonate ions over carbonate ions. We screen commercial membranes and select one high-performance membrane for detailed studies, quantifying its bicarbonate-carbonate selectivity factor and bicarbonate-passage factor. Feed pH, the combined concentration of aqueous CO 2 , bicarbonate, and carbonate species (or dissolved inorganic carbon), alkalinity, and permeation flux are systematically varied to study NF separation properties. We find that the selectivity factor, which exceeds 30 times in certain regimes, increases with higher feed pH and higher alkalinity. Lastly, the performance metrics of the selected NF membrane are input into a theoretical BE-ACS cycle analysis, and the required energy input and cycle capacity output are evaluated. Ideal cycle energy is found to be as low as around 250 kJ/mol, with opportunities identified for further decreases through process engineering and forward osmosis energy recovery.
A computational investigation of high-flux, plate-and-frame membrane modules for industrial carbon capture
In this work, we study the application of membrane-based separation systems for carbon capture, considering plate-and-frame membrane modules. The successful deployment of membrane CO 2 capture system relies on high-performing membranes as well as effective membrane modules that can fully exploit the developed membranes. A plate-and-frame membrane module is especially attractive for CO 2 capture from industrial flue gas due to its lower pressure drop compared to its counterparts such as spiral wound modules and hollow fiber modules. To design better plate-and-frame modules, we investigate their basic unit - a single membrane stack through a combination of computational modeling and experimental investigations. The modeling approach is based on Computational Fluid Dynamics (CFD) to represent a multiphysics problem, including the fluid flow and diffusion processes within a membrane module. We use experimental data collected under different operating conditions to validate the CFD model. Numerical results suggest a good agreement between experiments and model outputs for the CO 2 recovery, CO 2 mole fraction in the retentate and permeate, and stage-cut. The CFD model is able to predict accurately the flow behavior, providing valuable insights on the effects of fluid dynamics on mass transfer of CO 2 . We also carry out a sensitivity analysis to identify the effect of key parameters on the CO 2 recovery and the CO 2 purity of the outlet streams.
CFD modeling of high-flux plate-and-frame membrane modules for industrial carbon capture
In this work, we study the application of membrane-based separation systems for carbon capture, considering plate-and-frame membrane modules. The successful deployment of membrane CO2 capture system relies on high-performing membranes as well as effective membrane modules that can fully exploit the developed membranes. A plate-and-frame membrane module is especially attractive for CO2 capture from industrial flue gas due to its lower pressure drop compared to its counterparts such as spiral wound modules and hollow fiber modules. To design better plate-and-frame modules, we investigate their basic unit - a single membrane stack through a combination of computational modeling and experimental investigations. The modeling approach is based on Computational Fluid Dynamics (CFD) to represent a multiphysics problem, including the fluid flow and diffusion processes within a membrane module. We use experimental data collected under different operating conditions to validate the CFD model. Numerical results suggest a good agreement between experiments and model outputs for the CO2 recovery, CO2 mole fraction in the retentate and permeate, and stage-cut. The CFD model is able to predict accurately the flow behavior, providing valuable insights on the effects of fluid dynamics on mass transfer of CO2. We also carry out a sensitivity analysis to identify the effect of key parameters on the CO2 recovery and the CO2 purity of the outlet streams.