Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “materials development”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2016

Power generation from nanostructured PbTe-based thermoelectrics: comprehensive development from materials to modules

In this work, we demonstrate the use of high performance nanostructured PbTe-based materials in high conversion efficiency thermoelectric modules. We fabricated the samples of PbTe-2% MgTe doped with 4% Na and PbTe doped with 0.2% PbI2 with high thermoelectric figure of merit (ZT) and sintered them with Co-Fe diffusion barriers for use as p- and n-type thermoelectric legs, respectively. Transmission electron microscopy of the PbTe legs reveals two shapes of nanostructures, disk-like and spherical. The reduction in lattice thermal conductivity through nanostructuring gives a ZT of similar to 1.8 at 810 K for p-type PbTe and similar to 1.4 at 750 K for n-type PbTe. Nanostructured PbTe-based module and segmented-leg module using Bi2Te3 and nanostructured PbTe were fabricated and tested with hot-side temperatures up to 873 K in a vacuum. The maximum conversion efficiency of similar to 8.8% for a temperature difference (Delta T) of 570 K and B11% for a Delta T of 590 K have been demonstrated in the nanostructured PbTe-based module and segmented Bi2Te3/nanostructured PbTe module, respectively. Three-dimensional finite-element simulations predict that the maximum conversion efficiency of the nanostructured PbTe-based module and segmented Bi2Te3/nanostructured PbTe module reaches 12.2% for a Delta T of 570 K and 15.6% for a Delta T of 590 K respectively, which could be achieved if the electrical and thermal contact between the nanostructured PbTe legs and Cu interconnecting electrodes is further improved.

Hu, Xiaokai↗
DOE OSTI2022

Crystal engineering of heterocyclic arylene(ethynylene) oligomers through programmed aromatic stacking

Conjugated oligomers and polymers consisting of aromatic heterocycles are examples of next-generation organic electronic materials. However, control and optimization of the self-assembly of these materials in the solid-state, which is a crucial parameter for high efficiency performance, remains an unsolved challenge in materials development. In this work, we provide valuable insight into aromatic stacking interactions between fluorinated arene rings (ArF) and heterocycles with different electronic character (Het), and elaborate on the prospect of using these interactions to control the solid-state configurations of three-ring phenyleneethynylene oligomers (PEs). Oligomers possessing heterocycles typically thought of as electron-rich (ER) show blue-shifted optical spectra in the solid-state, while those incorporating heterocycles typically thought of us electron deficient (ED) show red-shifted solid-state optical spectra. Crystal structures show ArF-Het stacking interactions between the fluorinated side-chains and ER units, which twist the backbone out of planarity and prevent chromophore aggregation. Further, the interactions are absent in ED oligomers, highlighting cofacial incompatibility between ArF rings and ED units. A combination of TD-DFT computations and novel heterocycle descriptors reinforce our assignment of the oligomers as ED or ER, while exhaustive conformer analysis shows ArF-Het stacking interactions are a significant contributor to compound stability. Overall, this work describes the importance of heterocycle electronics in conformational control in the solid state, understanding of which can be a valuable asset in the development of novel optoelectronic materials.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Using Regression Analysis Method to Develop a Material Outgassing Model

Regression analysis is a powerful statistical method that allows us to examine the relationship among multiple variables of interest. There are many types of regression analysis, practically speaking, they all identify the influence of one or more independent variables on a dependent variable. Dependent variable is a main factor of interest that we are trying to assess, and independent variables are input factors which we believe to have an impact on dependable variable.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Development and Characterization of 3D-Printed Cementitious Sytems for Innovative Nuclear Systems

The Transformational Challenge Reactor (TCR) is being developed to demonstrate a revolutionary approach to deploying new nuclear power systems by building and operating an additively manufactured microreactor. This initiative provides a unique opportunity to investigate the possibility of taking advantage of the recent development of the 3D-printed concrete system using the Sky Big Area Additive Manufacturing (SkyBAAM) printer at the Manufacturing Demonstration Facility (MDF) at Oak Ridge National Laboratory. Two pathways have been pursued in parallel since the end of the second quarter of FY19: 1. Development of methods to characterize the performance of additive manufacturing concrete using traditional Portland-cement based solution, and 2. Investigation of the opportunity to develop innovation of printable materials with higher irradiation-resistance performance using nontraditional concrete solutions in favor of carbonated cementitious materials (CCMs). This report describes the results achieved to date for both pathways. The main results are listed below: 1. A test protocol has been established to characterize the fracture properties of 3D-printed concrete; this protocol will be used to assess the performance of printed traditional and nontraditional cementitious materials, with a focus on performance of the interfaces inherent to the additive manufacturing process. 2. A state-of-the-art review of the mechanisms, fabrication method, and performance of CCMs was conducted. CCMs appear to be a viable, highly innovative, more performant alternative to Portland-based cementitious solution for the erection of biological shield pending some materials development.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2021

Kinetics of Hydrogen Desorption from Yttrium Hydride: The Development of Material Characterization Methods

Yttrium hydride possesses attractive neutronic and thermal properties for moderator applications as a high-temperature moderator material in advanced thermal neutron spectrum reactors that require small core volumes. For safe operation of the nuclear reactors, it is critical to understand the kinetics of H desorption from yttrium hydride at elevated temperatures. In previous studies, the H desorption flux as a function of temperature was measured by thermal desorption spectroscopy. To fully understand the H desorption kinetics, the amount of H within the specimen must be locally evaluated, especially if this uniformity strongly affects the thermomechanical properties and irradiation resistance of the bulk material.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗
DOE OSTI2024

Development of Material Studies at the LANL UCN Facility Focusing on Actinide Hydriding and Fission Damage

The aging of as-built actinide surfaces in static and dynamic environments is a complex problem of high importance to LANL’s core mission. Many standard material science tools used to study this problem are ideal for highly controlled, lab-made samples. The goal of this work is to use ultracold neutrons to bridge the gap between lab made and as-built surface aging studies. This capability is unique to LANL and will support our core mission.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Synthesis of Lanthanide-Based Intermetallic Silicides

Lanthanide-containing materials are of interest because of their useful magnetic and electronic behavior. To study this intrinsic behavior, researchers need high-quality single crystals to avoid interference from grain boundaries or defects commonly found in polycrystalline samples. One method for growing single crystals is metal-flux synthesis, an approach that promotes crystal growth at lower reaction temperatures thus providing access to complex intermetallic phases. My project focuses on synthesizing novel lanthanide-containing intermetallic silicides related to previously reported f-element compounds with the Gd1??Fe4Si10?? structure type. I investigated reactions targeting lanthanum, praseodymium, neodymium, samarium, europium, and gadolinium-containing products, and used scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDS) to identify promising lanthanide-containing phases. I prepared reactions by loading lanthanide oxides, Co, Si, Al, and Ga into alumina crucibles in a 0.2:1:1:10:10 Ln2O3/Co/Si/Al/Ga mmol ratio, where Ln = La, Nd, Pr, Sm, Eu, or Gd. The reactions were sealed in quartz tubes, heated in a furnace, and centrifuged to separate crystals from excess flux. Afterwards, I mechanically isolated single crystals and prepared them for characterization. Pr-, Nd-, and Sm-containing reactions were confirmed through SEM-EDS to have formed the targeted quaternary phase. Single crystal X-ray diffraction (SC-XRD) data showed the Nd-containing crystals exhibited a hexagonal unit cell associated with the Gd1??Fe4Si10?? structure type. La- and Eu-containing reactions instead formed competing Co(Al/Ga/Si)3 phase crystals. Single-crystal XRD, powder XRD, and magnetic susceptibility and heat-capacity measurements will be collected for the remaining lanthanide-containing crystals. This data will help determine the complete crystal structure of the lanthanide analogues, their phase purity and whether they exhibit localized magnetic behavior, magnetic ordering, or other electronic signatures that can be compared with the previously reported actinide analogues. The disordered structure of this intermetallic family is associated with unusual magnetic and electronic behavior meaning lanthanide analogues may show potential as thermoelectric materials. Developing new thermoelectric candidate materials is relevant to energy efficiency and waste-heat recovery, which supports DOE’s broader goal of advancing science and technology solutions for America’s energy needs.

37 - INORGANIC, ORGANIC, PHYSICAL AND ANALYTICAL C↗