Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “laser simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Characterization of sub-picosecond laser-produced fast electrons by modeling angularly resolved bremsstrahlung measurements with 3D hybrid particle-in-cell code

Hard x-rays produced by intense laser-produced fast electrons interacting with solids are a vital source for producing radiographs of high-density objects and implosion cores for inertial confinement fusion. Accurate calculation of hard x-ray sources requires a three-dimensional (3D) simulation geometry that fully models the electron transport dynamics, including electron recirculation and the generation of absolute photon yields. To date, 3D simulations of laser-produced bremsstrahlung photons over tens of picoseconds and code benchmarking have not been performed definitively. In this study, we characterize sub-picosecond laser-produced fast electrons by modeling angularly resolved bremsstrahlung measurements for refluxing and non-refluxing targets using the 3D hybrid particle-in-cell (PIC), Large Scale Plasma code. Bremsstrahlung radiation and escaped electron data were obtained by focusing a 50-TW Leopard laser (15 J, 0.35 ps, 2 × 10 19 W/cm 2 ) on a 100-μm-thick Cu foil and a Cu with a large plastic backing (Cu–CH target). Data for both the Cu and Cu–CH targets were reproduced for simulations with a given set of electron parameters. Comparison of the simulations revealed that the hard x-ray emission from the Cu target was significantly longer in duration than that from the Cu–CH target. Here, the benchmarked hybrid PIC code could prove to be a powerful tool in the design and optimization of time- and angular-dependent bremsstrahlung sources for flash x-ray and gamma-ray radiography.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
NASA NTRS2003

Effects of Microsecond Pulse Laser Irradiation on Vis-NIR Reflectance Spectrum of Carbonaceous Chondrite Simulant: Implications for Martian Moons and Primitive Asteroids

Goal of this study is to make a progress in understanding the optical effects of space weathering on small bodies believed to be similar in composition to carbonaceous chondrites: C, G, B, F, T, D, and P asteroids and possibly Martian satellites Phobos and Deimos. The companion work focuses on petrological and mineralogical aspects of this process. One of the main factors of space weathering is meteorite and micrometeorite bombardment leading, in particular, to impact melting of components of the regolith. Studies of lunar regolith and laboratory experiments simulating impact melting show that the melting products differ from the unmelted material in mineralogy and distribution of chemical components among different phases that results in spectral changes. We simulate impact melting of CM chondrite by pulse laser irradiation of an artificial analog of such a meteorite. The analog is a mixture of 46 wt.% non-magnetic fraction of L5 ordinary chondrite Tsarev, 47 wt.% serpentine, 5 wt.% kerite, and 2 wt.% calcite. It simulates rather well bulk chemistry, including volatiles such as H2O and CO2, and only approximately the CM chondrite mineralogy. Thus, we do not expect the mixture to be spectrally similar to CM chondrites, but expect the laser melting products to be similar to those formed by impact melting of natural CM chondrites.

Hiroi, T.↗
DOE OSTI2024

Analyzing the effect of doping concentration in split-well resonant-phonon terahertz quantum cascade lasers

The effect of doping concentration on the temperature performance of the novel split-well resonant-phonon (SWRP) terahertz quantum-cascade laser (THz QCL) scheme supporting a clean 4-level system design was analyzed using non-equilibrium Green’s functions (NEGF) calculations. Experimental research showed that increasing the doping concentration in these designs led to better results compared to the split-well direct-phonon (SWDP) design, which has a larger overlap between its active laser states and the doping profile. However, further improvement in the temperature performance was expected, which led us to assume there was an increased gain and line broadening when increasing the doping concentration despite the reduced overlap between the doped region and the active laser states. Through simulations based on NEGF calculations we were able to study the contribution of the different scattering mechanisms on the performance of these devices. We concluded that the main mechanism affecting the lasers’ temperature performance is electron-electron (e-e) scattering, which largely contributes to gain and line broadening. Interestingly, this scattering mechanism is independent of the doping location, making efforts to reduce overlap between the doped region and the active laser states less effective. Optimization of the e-e scattering thus could be reached only by fine tuning of the doping density in the devices. By uncovering the subtle relationship between doping density and e-e scattering strength, our study not only provides a comprehensive understanding of the underlying physics but also offers a strategic pathway for overcoming current limitations. This work is significant not only for its implications on specific devices but also for its potential to drive advancements in the entire THz QCL field, demonstrating the crucial role of e-e scattering in limiting temperature performance and providing essential knowledge for pushing THz QCLs to new temperature heights.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2023

Toward accurate prediction of partial-penetration laser weld performance informed by three-dimensional characterization – Part II: μCT based finite element simulations

The mechanical behavior of partial-penetration laser welds exhibits significant variability in engineering quantities such as strength and apparent ductility. Understanding the root cause of this variability is important when using such welds in engineering designs. In Part II of this work, we develop finite element simulations with geometry derived from micro-computed tomography (μCT) scans of partial-penetration 304L stainless steel laser welds that were analyzed in Part I. We use these models to study the effects of the welds’ small-scale geometry, including porosity and weld depth variability, on the structural performance metrics of weld ductility and strength under quasi-static tensile loading. We show that this small-scale geometry is the primary cause of the observed variability for these mechanical response quantities. Additionally, we explore the sensitivity of model results to the conversion of the μCT data to discretized model geometry using different segmentation algorithms, and to the effect of small-scale geometry simplifications for pore shape and weld root texture. The modeling approach outlined and results of this work may be applicable to other material systems with small-scale geometric features and defects, such as additively manufactured materials.

36 MATERIALS SCIENCE↗
NASA NTRS1985

Juncture flow measurements using laser velocimetry

The turbulent flow in a simulated wing-fuselage juncture has been investigated using Laser Velocimetry. The juncture was simulated by a splitter plate with an unswept wing model mounted perpendicular to it. The use of sharp wing leading edge results in the elimination of separation ahead of leading edge, and hence the separation vortex. Secondary flow induced by Reynolds stress gradients is the main source of vortical motion in the juncture formed by the plate and the flat surface of the wing, whereas in the juncture formed by the plate and the circular arc surface of the wing, streamwise vorticity is generated because of the presence of lateral curvature in the flow field. The results of this study indicate that fillets in the juncture can improve the flow characteristics near the wing trailing edge.

Kubendran, L. R.↗
DOE OSTI2022

Non-equilibrium plasma generation via nano-second multi-mode laser pulses

The formation and growth of plasma kernels generated via nano-second mode-beating laser pulses is investigated here via a non-equilibrium self-consistent computational model. Chemically reactive Navier–Stokes equations are used to describe the hydrodynamics, and non-equilibrium effects are taken into account with a two-temperature model. Inverse Bremsstrahlung and multiphoton ionization are included self-consistently in the model via a coupled solution of the plasma governing equations and the radiative transfer equation (that describes the laser beam propagation and attenuation). A self-consistent approach (despite carrying additional challenges) minimizes the empiricism and it allows for a more accurate description since it prevents both the utilization of artificial plasma seeds to trigger the breakdown and the implementation of tuning parameters to simulate the laser-energy deposition. The advantages of this approach are confirmed by the good agreement between the numerically predicted and the experimentally measured plasma boundary evolution and absorbed energy. This also holds true for the periodic plasma kernel structures that, as suggested by the experiments and confirmed by the simulations presented here, are connected to the modulating frequency.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2020

Numerical simulation of the divergence and optical confinement factor of a semiconductor laser with an asymmetric periodic multilayer AlGaInAs/InP waveguide

The divergence and optical confinement factor of a semiconductor laser with an asymmetric periodic (multilayer) waveguide are numerically simulated. The reasons for the choice of the given heterostructure design are explained, and the consequences of choosing other layer structures are considered. It is shown how to choose the active waveguide thickness, the active region position on the waveguide, and the multilayer waveguide grating period. (lasers)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1974

Laser network survey and orbit recovery

Simulations were performed for the anticipated GEOS-C laser network stations at Goddard, Bermuda, and Florida to predict how well survey and orbit will be recovered. Lasers were added one at a time at Grand Turk, Antigua, and Panama to estimate the contribution from these additional sites. Time tag biases of 50 microseconds, survey uncertainties of 10 meters in each coordinate, laser range biases and noise estimates of 20 cm each, and conventional gravity uncertainties were included in the simulations. The results indicate that survey can be recovered to about 1 meter and Grand Turk can be recovered better than Antigua or Panama. Reducing the probably pessimistic assumed time tag biases and gravity field uncertainties improves the results. Using these survey recovery estimates, the short arc GEOS-C satellite heights for altimeter intercomparison orbits can be recovered within the calibration area to better than the required two meters.

Berbert, J. H.↗
NASA NTRS1999

Transverse Mode Dynamics of VCSELs Through Space-Time Domain Simulation

Modeling and simulation are important to understand laser operation and to optimize and design device functions. Numerical simulation of VCSEL (Vertical Cavity Surface Emitting Lasers) has been largely based on solving time-independent Helmholtz equation or time dependent coupled mode equations. There are various advantages for choosing these approaches. However, the disadvantages are also apparent. The former cannot handle dynamical mode competition seen in VCSELs, while the latter assumes a given type and number of modes a priori. Furthermore, the microscopic physics of heterstructures and electron-hole plasma is very often represented by a few parameters such as linear gain coefficients and the linewidth enhancement factor. These are over simplification of space and frequency (wavelength) dependent gain and refractive index functions. When the space-time dynamical operation of VCSELs becomes important, these simple approximations become questionable. In this paper, we apply a recently developed model for edge-emitting lasers to a gain guided VCSEL for space-time domain simulation. This model takes into account the actual nonlinear dependence of gain and refractive index on frequency and carrier density within the frame work of the effective Bloch equations. The corresponding partial differential equations are solved directly by finite difference methods. Laser behavior with increasing pumping current is investigated in detail. Special attention is paid to the dynamical competition of the transverse modes.

Goorjian, Peter M.↗
DOE OSTI2023

The importance of laser wavelength for driving inertial confinement fusion targets. I. Basic physics

We reinvestigate the role that laser wavelength plays in driving inertial confinement fusion (ICF) targets. Different assumptions underlie previous analytic frameworks that provide predictions for wavelength scaling of many important target parameters. These are explored and compared to radiation-hydrodynamics simulations of laser-driven targets. We are particularly interested here in lasers with wavelengths between 0.193 μm [wavelength of the Argon Flouride (ArF) excimer laser] and 0.527 μm (the frequency-doubled glass Nd:glass laser). Short-wavelength drivers have significant advantages for directly driven ICF targets, which are summarized here. We show that constraints such as providing a certain pressure or avoiding laser-plasma instability thresholds allow shorter laser wavelengths to provide energy savings, pressure enhancements, and/or higher hydrodynamic efficiencies. We also consider potential disadvantages, such as increased laser imprint or exposure to the Landau–Darrieus instability. These are shown to be either minor and/or can be easily remediated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Quarterly Management Document – FY22, 3rd Quarter, Multi-pass Hybrid Laser Arc Welding of Alloy 740H

During the 3rd quarter of FY22, progress was made on modeling and simulation of deep penetration laser welding of Alloy 740H. Advances in the modeling of residual stress development arising from the calculated temperature field of the solidifying weld pool were made to understand the development of solidification cracking. Additionally, preliminary modeling of the temperature field within the weld pool of a wobbling laser heat source was performed. The maximum temperature of the weld pool was found to vary with time. These result will allow modeling of deep penetration laser welding using a wobbling laser to mitigate weld defects and cracking. Also, additional characterization of hybrid laser arc welds indicated that these welds were not defect-free as originally thought and the current HLA welds would not be acceptable under criteria outlined in the ASME Boiler and Pressure Vessel Code, Section IX. Therefore, additional welding trails with variation of the welding parameters and HLA welding configurations are required to produce welds acceptable under the Section IX criteria. It was shown that considerable reduction of HLAW defects had been achieved with each successive welding campaign. Therefore additional variation of HLAW parameters may still yield the desired defect-free welds, however, options for alternate HLAW configurations as well as plate preheating are outlined as contingency plans to obtain suitable welds. These additional (unplanned) HLAW trial may prevent subsequent milestones from being achieved within the original budget.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Laser pulse driven control of charge and spin order in the two-dimensional Kondo lattice

Fast and dynamical control of quantum phases is highly desired in the application of quantum phenomena in devices. On the experimental side, ultrafast laser pulses provide an ideal platform to induce femtosecond dynamics in a variety of materials. Here we show that a laser pulse driven heavy fermion system can be tuned to dynamically evolve into a phase, which is not present in equilibrium. Using the state-of-the-art time-dependent variational Monte Carlo method, we perform numerical simulations of realistic laser pulses applied to the Kondo lattice model. By tracking spin and charge degrees of freedom we identify a dynamical phase transition, within the partially Kondo screened phase, from a charge ordered into a metallic state, while preserving the spin order of the system. Furthermore, we propose using high-harmonic generation and nonequilibrium optical conductivity to identify the dynamical phase transition in an ultrafast experiment.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Demonstration of improved laser preheat with a cryogenically cooled magnetized liner inertial fusion platform

We report on progress implementing and testing cryogenically cooled platforms for Magnetized Liner Inertial Fusion (MagLIF) experiments. Two cryogenically cooled experimental platforms were developed: an integrated platform fielded on the Z pulsed power generator that combines magnetization, laser preheat, and pulsed-power-driven fuel compression and a laser-only platform in a separate chamber that enables measurements of the laser preheat energy using shadowgraphy measurements. The laser-only experiments suggest that ~89% ± 10% of the incident energy is coupled to the fuel in cooled targets across the energy range tested, significantly higher than previous warm experiments that achieved at most 67% coupling and in line with simulation predictions. The laser preheat configuration was applied to a cryogenically cooled integrated experiment that used a novel cryostat configuration that cooled the MagLIF liner from both ends. Furthermore, the integrated experiment, z3576, coupled 2.32 ± 0.25 kJ preheat energy to the fuel, the highest to-date, demonstrated excellent temperature control and nominal current delivery, and produced one of the highest pressure stagnations as determined by a Bayesian analysis of the data.

47 OTHER INSTRUMENTATION↗
DOE OSTI2026

Constraining hydrodynamic models of inertial confinement fusion implosions using capsule surrogate experiments

We conduct capsule surrogate experiments at the National Ignition Facility to calibrate radiation hydrodynamic simulations to infer hydrodynamic conditions that are not observable in indirect drive ignition implosions. We tune the simulations by applying laser power and cross beam energy transfer (CBET) saturation multipliers to match the observables from capsule surrogate experiments. Shock timing, velocity, and symmetry are measured in liquid D 2 filled Keyhole capsule surrogate experiments and implosion trajectory, stagnation time, and shape time history are measured in in-flight 2D backlit x-ray radiography experiments (“2DConA”) of D 2 gas filled capsule implosions. Calibrated simulations suggest that the N210808 ignition implosion (fusion target gain = 0.7) had a shell mass remaining at stagnation of less than the nominal %5 (3.8%) and resulted in less confinement. For N221204, the shell was made 5.75 μm thicker to trade implosion velocity for increased confinement and resulted in a target gain = 1.5 with a shell mass remaining of 5.7%. Furthermore, a single adjusted model can reproduce all shock timing data as changes are made to shell thickness (79–85 μm) and laser wavelength separation (1.8–4.0 Å). However, for the 2DConA implosions, a 5% variation in the peak power laser multipliers and a 30% variation in late-time CBET between experiments are needed to match the observed stagnation times, in-flight $P_2$ shape, and hot-spot $P_2$ shape. While progress is being made to improve the models in simulations using focused experiments, capsule surrogate experiments will continue to be needed to optimize future ignition designs.

Lasers↗
NASA NTRS1974

Collisional coupling in counterstreaming laser-produced plasmas

The collisional processes which transfer momentum between counterstreaming plasmas are reviewed and applied to the example of a laser-produced plasma expanding into a partially ionized background. Experimental measurements of the dependence of the ion flow field on collisional momentum transfer demonstrate the validity of the simplified treatment of collision processes which have been adopted. A numerical model which simulates the laser-plasma interaction with the background confirms the importance of collisions in previous experimental studies of momentum coupling, and provides some insight into the distinction between collisional and collisionless flow regimes.

Koopman, D. W.↗
DOE OSTI2025

Simulation Tools for Characterizing Stress Distribution in Laser Welded Dissimilar Joints

This project focuses on developing a thermo-metallurgical-mechanical modeling method to accurately predict the microstructural evolution and residual stress in laser welding between dissimilar metals, such as HSLA steel and high carbon equivalent (CE) gear steel. The method leverages a comprehensive material database to model the temperature and rate dependent phase transformations, along with their associated effects on material properties, such as thermal expansion and flow stress, throughout the welding process. A key innovation is the incorporation of phase transformation and phase-specific properties, which enhances the accuracy of residual stress predictions. The mixture material in the fusion zone due to the dissimilar metals will also be addressed in the numerical model. This is especially critical in scenarios involving phase transformations in the fusion zone and heat-affected zone (HAZ), where the phase changes can induce substantial residual stress variations. The material database has been generated using JMatPro. The modeling approach is implemented through a custom User Material (UMAT) subroutine, executed with the commercial finite element software Abaqus.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Simulation Tools for Characterizing Stress Distribution in Laser Welded Dissimilar Joints

This project focuses on developing a thermo-metallurgical-mechanical modeling method to accurately predict the microstructural evolution and residual stress in laser welding between dissimilar metals, such as HSLA steel and high carbon equivalent (CE) gear steel. The method leverages a comprehensive material database to model the temperature and rate dependent phase transformations, along with their associated effects on material properties, such as thermal expansion and flow stress, throughout the welding process. A key innovation is the incorporation of phase transformation and phase-specific properties, which enhances the accuracy of residual stress predictions. The mixture material in the fusion zone due to the dissimilar metals will also be addressed in the numerical model. This is especially critical in scenarios involving phase transformations in the fusion zone and heat-affected zone (HAZ), where the phase changes can induce substantial residual stress variations. The material database has been generated using JMatPro. The modeling approach is implemented through a custom User Material (UMAT) subroutine, executed with the commercial finite element software Abaqus.

36 MATERIALS SCIENCE↗