Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “krypton”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Electron impact excitation of Kr XXXII

Collision strengths ({omega}) have been calculated for all 7750 transitions among the lowest 125 levels belonging to the 2s{sup 2}2p,2s2p{sup 2},2p{sup 3},2s{sup 2}3l,2s2p3l, and 2p{sup 2}3l configurations of boron-like krypton, Kr XXXII, for which the Dirac Atomic R-matrix Code has been adopted. All partial waves with angular momentum J{<=}40 have been included, sufficient for the convergence of {omega} for forbidden transitions. For allowed transitions, a top-up has been included in order to obtain converged values of {omega} up to an energy of 500 Ryd. Resonances in the thresholds region have been resolved in a narrow energy mesh, and results for effective collision strengths (Y) have been obtained after averaging the values of {omega} over a Maxwellian distribution of electron velocities. Values of Y are reported over a wide temperature range below 10{sup 7.3}K, and the accuracy of the results is assessed. Values of Y are also listed in the temperature range 7.3{<=}logT{sub e}(K){<=}9.0, obtained from the nonresonant collision strengths from the Flexible Atomic Code.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Electron impact excitation of Kr XXVIII

Collision strengths ({Omega}) are calculated for all 6328 transitions among the lowest 113 levels belonging to the 2s{sup 2}2p{sup 5},2s2p{sup 6},2s{sup 2}2p{sup 4}3l,2s2p{sup 5}3l, and 2p{sup 6}3l configurations of fluorine-like krypton, Kr XXVIII, using the Dirac Atomic R-matrix Code. All partial waves with angular momentum J{<=}40 are included, sufficient for the convergence of {Omega} for forbidden transitions. For allowed transitions a top-up is employed to obtain converged values of {Omega} up to an energy of 400 Ryd. Resonances in the thresholds region are resolved on a narrow energy mesh, and results for effective collision strengths (Y) are obtained after averaging the values of {Omega} over a Maxwellian distribution of electron velocities. Values of Y are reported over a wide temperature range below 10{sup 7.1}K, and the accuracy of the results is assessed. In addition, effective collision strengths are listed for the temperature range 7.0{<=}logT{sub e}(K){<=}9.0, obtained from non-resonant collision strengths generated with the FAC code.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Transition probabilities of the low-lying levels of Kr XXIV

Energy levels, radiative rates, and wavelengths are calculated for all levels of 3s{sup 2}3p, 3s3p{sup 2}, 3s{sup 2}3d, 3p{sup 3}, 3s3p3d, 3p{sup 2}3d and 3s3d{sup 2} configurations of Al-like krypton ion (Kr XXIV). Multiconfigurational Dirac–Hartree–Fock (MCDHF) method is adopted for calculating energy levels and radiative rates. Transition probabilities are reported for E1 and M2 transitions from the ground level. The valence–valence and core–valence correlation effects are accounted for in a systematic way. Breit interactions and quantum electrodynamics effects are estimated in subsequent relativistic configuration interaction calculations. Comparisons are made with the available data in the literature and good agreement has been found which confirms the reliability of our results.

74 ATOMIC AND MOLECULAR PHYSICS↗

Decomposition and vibrational relaxation in CH{sub 3}I and self-reaction of CH{sub 3} radicals.

Vibrational relaxation and dissociation of CH{sub 3}I, 2-20% in krypton, have been investigated behind incident shock waves in a diaphragmless shock tube at 20, 66, 148, and 280 Torr and 630-2200 K by laser schlieren densitometry. The effective collision energy obtained from the vibrational relaxation experiments has a small, positive temperature dependence, {Delta}E{sub down} = 63 x (T/298){sup 0.56} cm{sup -1}. First-order rate coefficients for dissociation of CH{sub 3}I show a strong pressure dependence and are close to the low-pressure limit. Restricted-rotor Gorin model RRKM calculations fit the experimental results very well with {Delta}E{sub down} = 378 x (T/298){sup 0.457} cm{sup -1}. The secondary chemistry of this reaction system is dominated by reactions of methyl radicals and the reaction of the H atom with CH{sub 3}I. The results of the decomposition experiments are very well simulated with a model that incorporates methyl recombination and reactions of methylene. Second-order rate coefficients for ethane dissociation to two methyl radicals were derived from the experiments and yield k = (4.50 {+-} 0.50) x 10{sup 17} exp(-32709/T) cm{sup 3} mol{sup -1} s{sup -1}, in good agreement with previous measurements. Rate coefficients for H + CH{sub 3}I were also obtained and give k = (7.50 {+-} 1.0) x 10{sup 13} exp(-601/T) cm{sup 3} mol{sup -1} s{sup -1}, in reasonable agreement with a previous experimental value.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The dissociation of diacetyl : a shock-tube and theoretical study.

The dissociation of diacetyl dilute in krypton has been studied in a shock tube using laser schlieren densitometry at 1200-1800 K and reaction pressures of 55 {+-} 2, 120 {+-} 3, and 225 {+-} 5 Torr. The experimentally determined rate coefficients show falloff and an ab initio/Master Equation/VRC-TST analysis was used to determine pressure-dependent rate coefficient expressions that are in good agreement with the experimental data. From the theoretical calculations k{sub {infinity}} (T) = 5.029 x 10{sup 19} (T/298 K){sup -3.40} exp(-37665/T) s{sup -1} for 300 < T < 2000 K. The laser schlieren profiles were simulated using a model for methyl recombination with appropriate additions for diacetyl. From the simulations rate coefficients were determined for CH{sub 3} + CH{sub 3} = C{sub 2}H{sub 6} and CH{sub 3} + C{sub 4}H{sub 6}O{sub 2} = CH{sub 3}CO + CH{sub 2}CO + CH{sub 4} (k(T) = 2.818T{sup 4.00} exp(-5737/T) cm{sup 3} mol{sup -1} s{sup -1}). Excellent agreement is found between the simulations and experimental profiles, and Troe type parameters have been calculated for the dissociation of diacetyl and the recombination of methyl radicals.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Metal-Organic Frameworks for Removal of Xe and Kr from Nuclear Fuel Reprocessing Plants

Removal of Xenon (Xe) and Krypton (Kr) from in parts per million (ppm) levels were demonstrated for the first time using two well known metal-organic frameworks (MOFs), HKUST-1 and Ni/DOBDC. Results of an activated carbon were also included for comparison. Ni/DOBDC has higher Xe/Kr selectivities than those of the activated carbon. Moreover, results show that the Ni/DOBDC and HKUST-1 can selectively adsorb Xe and Kr from air even at 1000 ppm concentration. This shows a promising future for MOFs in a radioactive nuclides separation from spent fuel.

activated carbon↗

Real-time observation of valence electron motion.

The superposition of quantum states drives motion on the atomic and subatomic scales, with the energy spacing of the states dictating the speed of the motion. In the case of electrons residing in the outer (valence) shells of atoms and molecules which are separated by electronvolt energies, this means that valence electron motion occurs on a subfemtosecond to few-femtosecond timescale (1 fs = 10{sup -15} s). In the absence of complete measurements, the motion can be characterized in terms of a complex quantity, the density matrix. Here we report an attosecond pump-probe measurement of the density matrix of valence electrons in atomic krypton ions. We generate the ions with a controlled few-cycle laser field and then probe them through the spectrally resolved absorption of an attosecond extreme-ultraviolet pulse, which allows us to observe in real time the subfemtosecond motion of valence electrons over a multifemtosecond time span. We are able to completely characterize the quantum mechanical electron motion and determine its degree of coherence in the specimen of the ensemble. Although the present study uses a simple, prototypical open system, attosecond transient absorption spectroscopy should be applicable to molecules and solid-state materials to reveal the elementary electron motions that control physical, chemical and biological properties and processes.

74 ATOMIC AND MOLECULAR PHYSICS↗

Controlling the Neutron Yield from a Small Dense Plasma Focus using Deuterium-Inert Gas Mixtures

The dense plasma focus (DPF) is a well known source of neutrons when operating with deuterium. The DPF is demonstrated to scale from 10{sup 4} n/pulse at 40 kA to >10{sup 12} n/pulse at 2 MA by non-linear current scaling as described in [1], which is itself based on the simple yet elegant model developed by Lee [2]. In addition to the peak current, the gas pressure controls the neutron yield. Recent published results suggest that mixing 1-5% mass fractions of Krypton increase the neutron yield per pulse by more than 10x. In this paper we present results obtained by mixing deuterium with Helium, Neon and Argon in a 500 J dense plasma focus operating at 140 kA with a 600 ns rise time. The mass density was held constant in these experiments at the optimum (pure) deuterium mass density for producing neutrons. A typical neutron yield for a pure deuterium gas charge is 2x10{sup 6}{+-}15% n/pulse. Neutron yields in excess of 10{sup 7}{+-}10% n/pulse were observed with low mass fractions of inert gas. Time integrated optical images of the pinch, soft x-ray measurements and optical emission spectroscopy where used to examine the pinch in addition to the neutron yield monitor and the fast scintillation detector. Work supported by Domestic Nuclear Detection Office under contract HSHQDC-08-C-00020.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Evolution of the plasma composition of a high power impulse magnetron sputtering system studied with a time-of-flight spectrometer

The plasma of a high power impulse magnetron sputtering system has been investigated using a time-of-flight spectrometer. The target materials included high sputter yield materials (Cu, Ag), transition metals (Nb, Cr, Ti), and carbon (graphite); the sputtering gases were argon, krypton, and nitrogen, and two different target thicknesses were selected to consider the role of the magnetic field strength. Measurements for selected combinations of those parameters give quantitative information on the transition from gas-dominated to metal-dominated (self-sputtering) plasma, on the fractions of ion charge states, and in the case of molecular gases, on the fraction of atomic and molecular ions.

36 MATERIALS SCIENCE↗

A compact electron beam ion source with integrated Wien filter providing mass and charge state separated beams of highly charged ions

A Wien filter was designed for and tested with a room temperature electron beam ion source (EBIS). Xenon charge state spectra up to the charge state Xe{sup 46+} were resolved as well as the isotopes of krypton using apertures of different sizes. The complete setup consisting of an EBIS and a Wien filter has a length of less than 1 m substituting a complete classical beamline setup. The Wien filter is equipped with removable permanent magnets. Hence total beam current measurements are possible via simple removal of the permanent magnets. In dependence on the needs of resolution a weak (0.2 T) or a strong (0.5 T) magnets setup can be used. In this paper the principle of operation and the design of the Wien filter meeting the requirements of an EBIS are briefly discussed. The first ion beam extraction and separation experiments with a Dresden EBIS are presented.

43 PARTICLE ACCELERATORS↗

DC High Voltage Conditioning of Photoemission Guns at Jefferson Lab FEL

DC high voltage photoemission electron guns with GaAs photocathodes have been used to produce polarized electron beams for nuclear physics experiments for about 3 decades with great success. In the late 1990s, Jefferson Lab adopted this gun technology for a free electron laser (FEL), but to assist with high bunch charge operation, considerably higher bias voltage is required compared to the photoguns used at the Jefferson Lab Continuous Electron Beam Accelerator Facility. The FEL gun has been conditioned above 400 kV several times, albeit encountering non-trivial challenges with ceramic insulators and field emission from electrodes. Recently, high voltage processing with krypton gas was employed to process very stubborn field emitters. This work presents a summary of the high voltage techniques used to high voltage condition the Jefferson Lab FEL photoemission gun.

43 PARTICLE ACCELERATORS↗

Acceleration of electrons generated during ionization of a gas by a nearly flat profile laser pulse

A scheme of acceleration of electrons generated during ionization of krypton by nearly flat radial and nearly flat temporal laser pulse profiles has been suggested. The energy spectrum of the electrons suggests that energy of the electrons is higher for a nearly flat temporal profile than that for a nearly flat radial profile. The suppression of scattering of the electrons is better for a nearly flat radial profile than that for a nearly flat temporal profile. The energy of the electrons increases, scattering decreases, and beam quality improves with an increase in flatness of radial and temporal profiles.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

CHARGED PARTICLE MOTION IN AN EXPLOSIVELY GENERATED IONIZING SHOCK

Different aspects of the plasma generated in a gas contained in a tube due to detonation of a small explosive charge located at one end of the tube are presented. The motion of the charged particles within the plasma is monitored using Rogowski coils. Using time-resolved emission spectroscopy the temperature and species in the detonation products and compressed gas behind the shock wave are recorded. From the spectral lines of the emission profiles the temperatures and electron density were evaluated to be in the vicinity of 7,000 K and 5x10{sup 22} m{sup -3}. An ultra fast wave traveling down the guide tube ahead of the hydrodynamic shock and causing any charged particles there to move fast enough to be detected by the Rogowski coils was recorded. From the measurements the phase velocity of the wave was calculated at 525 km/s when krypton filled the tube, and 1300 km/s in the case of argon. The temperature and density measurements are consistent with the data reported in the literature for similar tests. The electrostatic pulse measurements are a new phenomena not previously observed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dipole oscillator strength distributions with improved high-energy behavior: Dipole sum rules and dispersion coefficients for Ne, Ar, Kr, and Xe revisited

The construction of the dipole oscillator strength distribution (DOSD) from theoretical and experimental photoabsorption cross sections combined with constraints provided by the Kuhn-Reiche-Thomas sum rule and molar refractivity data is a well-established technique that has been successfully applied to more than 50 species. Such DOSDs are insufficiently accurate at large photon energies. A novel iterative procedure is developed that rectifies this deficiency by using the high-energy asymptotic behavior of the dipole oscillator strength density as an additional constraint. Pilot applications are made for the neon, argon, krypton, and xenon atoms. The resulting DOSDs improve the agreement of the predicted S{sub 2} and S{sub 1} sum rules with ab initio calculations while preserving the accuracy of the remainder of the moments. Our DOSDs exploit new and more accurate experimental data. Improved estimates of dipole properties for these four atoms and of dipole-dipole C{sub 6} and triple-dipole C{sub 9} dispersion coefficients for the interactions among them are reported.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ramsey-type spectroscopy in the XUV spectral region

We report an experimental and theoretical investigation of Ramsey-type spectroscopy with high-order harmonic generation applied to autoionizing states of Krypton. The ionization yield, detected by an ion-mass spectrometer, shows the characteristic quantum interference pattern. The behaviour of the fringe contrast was interpreted on the basis of a simple analytic model, which reproduces the experimental data without any free parameter.

74 ATOMIC AND MOLECULAR PHYSICS↗

Acceleration to high velocities and heating by impact using Nike KrF laser

The Nike krypton fluoride laser [S. P. Obenschain, S. E. Bodner, D. Colombant, et al., Phys. Plasmas 3, 2098 (1996)] is used to accelerate planar plastic foils to velocities that for the first time reach 1000 km/s. Collision of the highly accelerated deuterated polystyrene foil with a stationary target produces approxGbar shock pressures and results in heating of the foil to thermonuclear temperatures. The impact conditions are diagnosed using DD fusion neutron yield, with approx10{sup 6} neutrons produced during the collision. Time-of-flight neutron detectors are used to measure the ion temperature upon impact, which reaches 2-3 keV.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Evolution Of Shapes And Collectivity In Exotic Nuclei

The coexistence of prolate and oblate shapes in light selenium and krypton isotopes has been investigated using the complementary techniques of low-energy Coulomb excitation with radioactive ions beams and lifetime measurements of excited states after fusion-evaporation reactions. The resulting B(E2) values and spectroscopic quadrupole moments represent a sensitive test for configuration mixing calculations going beyond the mean-field approach. The onset of collectivity for neutron-rich nuclei near {sup 68}Ni has been investigated using a new technique to measure lifetimes with the recoil distance Doppler shift method after multi-nucleon transfer reactions.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗