Results for “in situ processing” — Page 18

NASA NTRS2005

"Layers in the Equatorial Mesosphere, Motions and Aerosol Rocket and Radar Study (LEMMA)"

Our role in the LEMMA rocket and radar measurement program had several components corresponding to the various phases of the research effort. Our initial efforts focused on definition of the experimental configuration and measurement requirements following the decision to move the experiment to Kwajalein. At this stage of the research, the PI of this subtask consulted with the project PI, Dr. Gerald Lehmacher, and other participants in defining the atmospheric conditions that would allow optimal measurements and the radar modes that would best characterize the structures we hoped to observe. This proved to be a challenge, as the ALTAIR radar, despite its substantial capabilities, did not have a representative suite of software control and analysis capabilities. Once the experiment and timing were defined, our role shifted to numerical characterization of potential radar backscatter and in situ turbulence signatures accompanying various dynamical processes. Following completion of the measurement program, we supported the analysis and interpretation of the experimental data.

Fritts, D. C.↗

NASA NTRS2015

A plasma-based non-intrusive point source for acoustic beamforming applications

A laser-generated plasma acoustic point source is used to directly measure the point spread function (PSF) of a microphone phased array. In beamforming analysis of microphone phased array data, the true acoustic field is convolved with the array's PSF. By directly measuring the PSF, corrections to the array analysis can be computed and applied. The acoustic source is measured in an open-jet aeroacoustic facility to evaluate the effects of sampling rate, microphone installation, source shift, reflections, shear layer refraction and model presence. Results show that measurements exhibit behavior consistent with theory with regard to source shift and shear layer refraction. Application of a measured PSF in beamforming analysis shows the process provides an effective in-situ method for array calibration both with and without flow and allows for corrections to incorporate reflections and scattering. The technique improves the agreement of beamforming results with the true spectrum of a known source, especially in the presence of reflections.

phased array↗

NASA NTRSDate not supplied

In-Situ Consolidation Automated Fiber Placement of Thermoplastic Composites for High-Rate Aircraft Manufacturing

The National Aeronautics and Space Administration (NASA) initiated the Hi-Rate Composites Aircraft Manufacturing (HiCAM) project in 2021 with the goal of significantly increasing composite structures manufacturing rate in the commercial aircraft industry. The technologies currently under investigation include resin infusion and automated fiber placement (AFP) of novel thermoset materials and thermoplastic composites. Thermoplastic composites offer attractive solutions to rapid manufacturing due to their ability to be formed and consolidated quickly. NASA is particularly focused on assessing composite structure manufacturing utilizing an in-situ consolidation AFP of thermoplastics (ICAT) process employing a recently developed laser heating system. Two semi-crystalline polyaryletherketone thermoplastic tape materials were characterized to ascertain the ICAT process parameters at AFP placement speeds approaching 423 mm/s. The required laser power settings were determined at Electroimpact, measuring material temperatures utilizing a forward looking infrared (FLIR) thermal imaging camera and thermocouples. The material temperature, tool temperature, and placement speed were varied for resulting consolidation quality assessment. The resulting temperature data were also utilized to calibrate thermal analysis models under development at NASA. The experimental temperature data confirmed analytical results. An overview of the HiCAM project as well as initial data from ICAT process characterizations are described.

thermoplastic composites↗

NASA NTRSDate not supplied

NASA Lunar Surface Innovation Initiative: Ensuring a Cohesive, Executable Strategy for Technology Development

Establishing a sustainable human presence on the Moon allows NASA to develop and test new approaches, technologies, and systems that will enable us to function in other, more challenging environments. The Lunar Surface Innovation Initiative (LSII) was established in 2019 and has evolved into a key agency asset to spur technology development and provide risk reduction for lunar surface system development and flight demonstrations. LSII coordinates activities implemented through a combination of in-house activities, competitive programs, and public-private partnerships to create transformative technologies needed for lunar surface exploration. This paper will outline the LSII model used to develop a technology pipeline that will retire the primary technology hurdles in six capability areas. In-situ resource utilization technologies for collecting, processing, storing, and using material found or manufactured on the Moon. Surface power technologies that provide the capability for sustainable, continuous power throughout the day and night for lunar missions. Dust mitigation strategies that diminish lunar dust hazards on lunar surface systems such as cameras, solar panels, space suits, habitats, and instrumentation. Extreme environments technologies that enable systems to operate throughout the full range of lunar surface conditions, including lunar noon (up to 150 at the equator), night (down to - 180 at the equator), multiple day/night cycles, and in permanently shadowed regions (down to -250). Extreme access technologies that enable humans or robotic systems to access, navigate, and explore previously inaccessible lunar surface or subsurface areas. Excavation and construction technologies that will allow affordable, autonomous manufacturing or construction. We outline key results, including milestones and achievements related to the capability areas and outcomes from partnerships with the commercial sector. A key tenet of the LSII is the Lunar Surface Innovation Consortium (LSIC), a collaboration across industry, academia, and government to successfully develop the transformative capabilities for lunar surface exploration. LSIC provides a forum for NASA to communicate technological requirements, needs, and opportunities and for the community to share existing capabilities and identify critical gaps with NASA. By working side by side with commercial enterprises and our international partners, NASA is able to combine the knowledge and expertise needed to explore the lunar surface and make technical advances that will feed technological and economic growth. Since its inception, LSII has engaged over 600 organizations across the United States and 46 countries to shape the technologies and systems needed to explore the lunar surface and stimulate a lunar surface economy.

lunar, lunar surface, technology development, ISRU↗

NASA NTRSDate not supplied

NASA Lunar Surface Innovation Initiative: Ensuring a Cohesive, Executable Strategy for Technology

Establishing a sustainable human presence on the Moon allows NASA to develop and test new approaches, technologies, and systems that will enable us to function in other, more challenging environments. The Lunar Surface Innovation Initiative (LSII) was established in 2019 and has evolved into a key agency asset to spur technology development and provide risk reduction for lunar surface system development and flight demonstrations. LSII coordinates activities implemented through a combination of in-house activities, competitive programs, and public-private partnerships to create transformative technologies needed for lunar surface exploration. This paper will outline the LSII model used to develop a technology pipeline that will retire the primary technology hurdles in six capability areas. In-situ resource utilization technologies for collecting, processing, storing, and using material found or manufactured on the Moon. Surface power technologies that provide the capability for sustainable, continuous power throughout the day and night for lunar missions. Dust mitigation strategies that diminish lunar dust hazards on lunar surface systems such as cameras, solar panels, space suits, habitats, and instrumentation. Extreme environments technologies that enable systems to operate throughout the full range of lunar surface conditions, including lunar noon (up to 150 at the equator), night (down to - 180 at the equator), multiple day/night cycles, and in permanently shadowed regions (down to -250). Extreme access technologies that enable humans or robotic systems to access, navigate, and explore previously inaccessible lunar surface or subsurface areas. Excavation and construction technologies that will allow affordable, autonomous manufacturing or construction. We outline key results, including milestones and achievements related to the capability areas and outcomes from partnerships with the commercial sector. A key tenet of the LSII is the Lunar Surface Innovation Consortium (LSIC), a collaboration across industry, academia, and government to successfully develop the transformative capabilities for lunar surface exploration. LSIC provides a forum for NASA to communicate technological requirements, needs, and opportunities and for the community to share existing capabilities and identify critical gaps with NASA. By working side by side with commercial enterprises and our international partners, NASA is able to combine the knowledge and expertise needed to explore the lunar surface and make technical advances that will feed technological and economic growth. Since its inception, LSII has engaged over 600 organizations across the United States and 46 countries to shape the technologies and systems needed to explore the lunar surface and stimulate a lunar surface economy.

Lunar↗

NASA NTRS2022

In-Situ Consolidation Automated Fiber Placement of Thermoplastic Composites for High-Rate Aircraft Manufacturing

The National Aeronautics and Space Administration (NASA) initiated the Hi-Rate Composites Aircraft Manufacturing (HiCAM) project in 2021 with the goal of significantly increasing composite structures manufacturing rate in the commercial aircraft industry. The technologies currently under investigation include resin infusion and automated fiber placement (AFP) of novel thermoset materials and thermoplastic composites. Thermoplastic composites offer attractive solutions to rapid manufacturing due to their ability to be formed and consolidated quickly. NASA is particularly focused on assessing composite structure manufacturing utilizing an in-situ consolidation AFP of thermoplastics (ICAT) process employing a recently developed laser heating system. Two semi-crystalline polyaryletherketone thermoplastic tape materials were characterized to ascertain the ICAT process parameters at AFP placement speeds approaching 423 mm/s. The required laser power settings were determined at Electroimpact, measuring material temperatures utilizing a forward looking infrared (FLIR) thermal imaging camera and thermocouples. The material temperature, tool temperature, and placement speed were varied for resulting consolidation quality assessment. The resulting temperature data were also utilized to calibrate thermal analysis models under development at NASA. The experimental temperature data confirmed analytical results. An overview of the HiCAM project as well as initial data from ICAT process characterizations are described.

laser heating↗

NASA NTRSDate not supplied

Laser Angle of Incidence Effects on in-Situ Consolidation of Automated Fiber Placement of Polyaryletherketone Composites

NASA and Electroimpact, Inc. ®†† in conjunction with other U.S. industry partners are performing research as a part of the NASA High-rate Composites for Aircraft Manufacturing (HiCAM) Project to fabricate thermoplastic panels using automated fiber placement (AFP) to increase manufacturing rates of aircraft structural composites. This work focuses on evaluating the in-situ consolidation AFP of thermoplastics (ICAT) process. Previous studies of the ICAT process using semi-crystalline, polyaryletherketone (PAEK) slit-tape have resulted in an adequate degree of intimate contact between plies; however, the resulting interlaminar strength have been less than laminates fabricated in an autoclave. To improve these properties, the effect of reducing the laser angle of incidence (AoI) during placement to increase the degree of auto-hesion was evaluated. The AoI of the laser assisted AFP head was varied between 12° and 16° to fabricate multiple quasi- isotropic and unidirectional test panels. Physics-based thermal models developed at the NASA Langley Research Center were utilized to predict the temperature profile. Laminate processing temperature was measured experimentally, and panel quality was evaluated by both non- destructive evaluation (NDE) as well as destructively by photo-microscopy. The effect on interlaminar strength was determined by short beam strength testing. Test results of carbon fiber laminates fabricated by ICAT using polyetheretherketone (PEEK), polyetherketoneketone (PEKK), and low-melt polyaryletherketone (LM-PAEK) at various laser angles of incidence, placement temperatures and placement speeds are presented.

Laser↗

NASA NTRSDate not supplied

Laser Angle of Incidence Effects on in-Situ Consolidation of Automated Fiber Placement of Polyaryletherketone Composites

NASA and Electroimpact, Inc. ® in conjunction with other U.S. industry partners are performing research as a part of the NASA High-rate Composites for Aircraft Manufacturing (HiCAM) Project to fabricate thermoplastic panels using automated fiber placement (AFP) to increase manufacturing rates of aircraft structural composites. This work focuses on evaluating the in-situ consolidation AFP of thermoplastics (ICAT) process. Previous studies of the ICAT process using semi-crystalline, polyaryletherketone (PAEK) slit-tape have resulted in an adequate degree of intimate contact between plies; however, the resulting interlaminar strength have been less than laminates fabricated in an autoclave. To improve these properties, the effect of reducing the laser angle of incidence (AoI) during placement to increase the degree of auto-hesion was evaluated. The AoI of the laser assisted AFP head was varied between 12° and 16° to fabricate multiple quasi-isotropic and unidirectional test panels. Physics-based thermal models developed at the NASA Langley Research Center were utilized to predict the temperature profile. Laminate processing temperature was measured experimentally, and panel quality was evaluated by both non-destructive evaluation (NDE) as well as destructively by photo-microscopy. The effect on interlaminar strength was determined by short beam strength testing. Test results of carbon fiber laminates fabricated by ICAT using polyetheretherketone (PEEK), polyetherketoneketone (PEKK), and low-melt polyaryletherketone (LM-PAEK) at various laser angles of incidence, placement temperatures and placement speeds are presented.

Thermoplastic Composites↗

NASA NTRS2011

Observation of Hydrological Processes Using Remote Sensing: Volume 2: The Science of Hydrology - Chapter 2.14

Improving water management can make a significant contribution to achieving most of the Millennium Development Goals established by the UN General Assembly in 2000, especially those related to poverty, hunger, and major diseases. The World Summit on Sustainable Development (WSSD) in 2002 recognized this need. Water and sanitation in particular received great attention from the Summit. The Johannesburg Plan of Implementation recommended to improve water resources management and scientific understanding of the water cycle through joint cooperation and research. For this purpose, it is recommended to promote knowledge sharing, provide capacity building, and facilitate the transfer of technology including remote-sensing (RS) and satellite technologies, especially to developing countries and countries with economies in transition, and to support these countries in their efforts to monitor and assess the quantity and quality of water resources, for example, by establishing and/or further developing national monitoring networks and water resources databases and by developing relevant national indicators. The Johannesburg Plan also adopted integrated water resources management as the overarching concept in addressing and solving water-related issues. As a result of the commitments made in the Johannesburg Plan of Implementation, several global and regional initiatives have emerged. Current international initiatives such as the Global Monitoring for Environment and Security (GMES) program of the European Commission and the European Space Agency (ESA), and the Global Earth Observation System of Systems (GEOSS) 10-Year Implementation Plan, have all identified Earth observation (EO) of the water cycle as the key in helping to solve the world s water problems. The availability of spatial information on water quantity and quality will also enable closure of the water budget at river basin and continental scales to the point where effective water management is essential (e.g., as requested by the European Union s Water Framework Directive (WFD), as well as national policies). Geo-information science and EO are vital in achieving a better understanding of the water cycle and better monitoring, analysis, prediction, and management of the world s water resources. The major components of the water cycle of the Earth system and their possible observations are presented. Such observations are essential to understand the global water cycle and its variability, both spatially and temporally, and can only be achieved consistently by means of EOs. Additionally, such observations are essential to advance our understanding of coupling between the terrestrial, atmospheric, and oceanic branches of the water cycle, and how this coupling may influence climate variability and predictability. Water resources management directly interferes with the natural water cycle in the forms of building dams, reservoirs, water transfer systems, and irrigation systems that divert and redistribute part of the water storages and fluxes on land. The water cycle is mainly driven and coupled to the energy cycle in terms of phase changes of water (changes among liquid, water vapor, and solid phases) and transport of water by winds in addition to gravity and diffusion processes. The water-cycle components can be observed with in situ sensors as well as airborne and satellite sensors in terms of radiative quantities. Processing and conversion of these radiative signals are necessary to retrieve the water-cycle components.

Wilder, Peter↗

NASA NTRSDate not supplied

In Situ Resource Utilization (ISRU) Envisioned Future Priorities

The National Aeronautics and Space Administration (NASA) of the United States of America (US) has initiated the Artemis Moon to Mars program to send astronauts (the first woman and person of color) back to the lunar surface, create a sustainable human lunar exploration program, and lead the first human exploration mission to the Mars surface in the 2030’s. A major objective of this program is to characterize the resources that exist on the Moon and Mars, and learn how to utilize them for sustained and affordable exploration. Commonly known as In Situ Resource Utilization (ISRU), the search for, acquisition, and processing of resources in space has the potential to greatly reduce the dependency on transporting mission consumables and infrastructure from Earth, thereby reducing mission costs, risks, and dependency on Earth. Through the extraction and processing of resources into mission commodities such as rocket propellants, life support consumables, and fuel cell reactants, ISRU enhances and evolves the cis-lunar, lander, and surface transportation systems required for human exploration; expanding and ehancing HOW humans get to, explore, and return from the Moon. Through the extraction and processing of resources into metals, silicon, and other manufacturing and construction feedstock, ISRU enhances and allows for the expansion of critical infrastructure through in situ manufacturing and construction capabilities needed for WHAT humans do on the Moon and in cis-lunar space. Because of this, ISRU supports and enables commercial involvement beyond NASA and governmental agencies by both lowering the cost of sustained transportation to/from/on the Moon as well as supporting the market required for needing these transportation systems. To achieve this vision, NASA’s Space Technology Mission Directorate (STMD) ensures the coordinated development of ISRU and other critical space and surface infrastructure elements such as propulsion, power, manufacturing, construction, and robotics through the Strategic Technology Architecture Roundtable (STAR) process. Through STAR, an integrated framework and process has been created allowing for capabilities and technologies to be linked and assessed, gaps to be identified, specifications and metrics to be established, and provide a means to prioritize and implement technology development and missions. For lunar ISRU, three primary areas of development have been initiated, (1) understanding, mapping, extracting, and processing water and other volatiles found in polar permanently shadowed regions (PSRs), (2) methods, technologies to extract oxygen from regolith, and (3) methods, technologies, and use cases for metals, silicon, and other feedstock commodities extracted and produced from lunar resources. This presentation will briefly discuss the STAR process and elaborate on the current status and future plans for ISRU development, demonstration, and architecture implementation of NASA’s Envisioned Future Priorities plan for ISRU.

In Situ Resource Utilization↗

NASA NTRSDate not supplied

From Regolith to Living Off the Land: Formulating a Data Model to Catalog Lunar Construction Materials

Artemis Program objectives for sustainable, long-term presence on the Moon and more distant planetary surfaces will require learning to “Live off the Land”, relying on in-situ resource utilization to produce infrastructure and building materials from lunar regolith, icy subsurface deposits, and residual waste materials. Meeting demand for consumables while scaling development with resources found within the landing zone will require detailed data on the geology and environment of the lunar surface. Lunar infrastructure development will generate vast amounts of new engineering data regarding availability of processed feedstocks and their performance in building materials. Lunar engineering data accessible to program partners, research institutions and industry may help situate processes and specifications within the in-situ GIS context. Lunar missions to date have generated geological and ice favorability maps of the lunar surface, and recent technology studies have tested automated construction systems and novel material formulations using regolith simulants and binders. Current discussions focus on identifying key feedstocks, quantities required for nominal mission scenarios and infrastructure plans, and mapping the value chain from regolith to feedstock to consumables and construction materials.

lunar construction↗

NASA NTRSDate not supplied

From Regolith to Living Off the Land: Formulating a Data Model to Catalog Lunar Construction Materials

Artemis Program objectives for sustainable, long-term presence on the Moon and more distant planetary surfaces will require learning to “Live off the Land”, relying on in-situ resource utilization to produce infrastructure and building materials from lunar regolith, icy subsurface deposits, and residual waste materials. Meeting demand for consumables while scaling development with resources found within the landing zone will require detailed data on the geology and environment of the lunar surface. Lunar infrastructure development will generate vast amounts of new engineering data regarding availability of processed feedstocks and their performance in building materials. Lunar engineering data accessible to program partners, research institutions and industry may help situate processes and specifications within the in-situ GIS context. Lunar missions to date have generated geological and ice favorability maps of the lunar surface, and recent technology studies have tested automated construction systems and novel material formulations using regolith simulants and binders. Current discussions focus on identifying key feedstocks, quantities required for nominal mission scenarios and infrastructure plans, and mapping the value chain from regolith to feedstock to consumables and construction materials.

lunar construction↗

NASA NTRS1990

Next-generation in-situ science concepts and technology

This paper discusses the concepts of a next-generation in situ science program, named Sample Acquisition, Analysis, and Preservation (SAAP), established by NASA to develop critical technologies for remote identification, acquisition, processing, analysis, and preservation of materials for the in situ science, engineering characterization, and earth return. Special attention is given to the SAAP architecture, system design, remote sensing system, sample acquisition system, and methods for sample analysis. A diagram of the SAAP preliminary system conceptual design is included.

Muirhead, Brian↗

NASA NTRS2011

Microwave Processing of Planetary Surfaces for Volatile Extraction

In-Situ Resource Utilization will be necessary for sustained exploration of space. Volatiles are present in planetary soils, but water by far has the strongest potential for effective utilization. The presence of water at the lunar poles, Mars, and possibly on Phobos opens the possibility of producing LOX for propellant. Water is also a useful radiation shielding material and water (and oxygen) are expendables that are also required for habitation in space. Because of the strong function of water vapor pressure with temperature, heating soil effectively liberates water vapor by sublimation. Microwave energy will penetrate soil and heat from within much more efficiently than heating from the surface with radiant heat. This is especially true under vacuum conditions since the heat transfer rate is very low. The depth of microwave penetration is a strong function of the microwave frequency and to a lesser extent on soil dielectric properties. Methods for measuring the complex electric permittivity and magnetic permeability are being developed and have been measured for some lunar soil simulants at 0.5, 2.45, and 10 GHz from room temperature down to liquid nitrogen temperature. A new method for delivery of microwaves deep into a planetary surface is being prototyped with laboratory experiments and modeled with COMSOL MultiPhysics. We have plans to set up a planetary testbed in a large vacuum chamber in the coming year. Recent results will be presented.

Ethridge, Edwin C.↗

NASA NTRS1999

Detached Growth of Germanium and Germaniumsilicon

Up to now, detached growth was observed mainly under microgravity, i.e. under the absence of hydrostatic pressure that hinders the formation of a free melt meniscus. the detached growth of germanium doped with gallium was obtained under 1 g conditions, the growth was performed in quartz-glass ampoule. Part of the crystal grew without wall contact, the detached growth was observed in-situ with a CCD-camera as well as after the growth process in form of growth lines and the formation of <111> facets on the crystal surface. GeSi crystal (oriientation: <111>, maximum silicon content: 4 at%, seed material: Ge) was grown in a pBN crucible (excluding the possibility of in-situ monitoring of the growth process). The grown crystal exhibits three growth facets, indicating also wall free growth. Surface analysis of the crystals (NDIC, SEM) and characterization of crystal segregation (EDAX, resistivity measurement) and defect structure (EPD, x-ray diffraction measurements) will be presented.

Dold, P.↗

NASA NTRS2006

Floating the Ball: Advances in the Technology of Electrostatic Levitation

Electrostatic Levitation (ESL) is an emerging technology. The MSFC ESL is a NASA facility that supports investigations of refractory solids and melts. The facility can be used to process a wide variety of materials including metals, alloys, ceramics, glasses and semiconductors. Containerless processing via ESL provides a high-purity environment for the study of high temperature materials and access to metastable states. Scientific topics investigated in the facility include nucleation, undercooling, metastable state formation and metallic glass formation. Additionally, the MSFC ESL provides data for the determination of phase diagrams, time-temperature-transition diagrams, viscosity, surface tension, density, heat capacity and creep resistance. In order to support a diverse research community, the MSFC ESL facility has developed a number of technical capabilities, including a portable system for in situ studies of structural tran$hrmations during processing at the high-energy X-ray beamline at the Advanced Photon Source of Argonne National Laboratory. The capabilities of the MSFC ESL facilities will be discussed and selected results of materials processing and characterization studies will be presented.

Rogers, Jan R.↗

NASA NTRSDate not supplied

Expansion of Additive Manufacturing Capabilities Into in Situ Alloying of Dispersion Strengthened, High Temperature Cu Alloys

New alloys and materials are potentially possible through additive manufacturing’s unique thermal history. Current literature explores the fabrication of eutectic and solid solution strengthened alloys through in-situ alloying, to take advantage of AM’s unique thermal history. The resulting lessons learned by in-situ alloying currently available materials will likely lead to the development of novel materials solely possible through in-situ alloying. This work will expand the application of in-situ alloying via additive manufacturing to NASA’s GRCop-42 (Cu-4at% Cr-2at% Nb), a high temperature copper alloy which has shown success in additively manufactured combustion chambers from pre-alloyed powders. GRCop-42 is unique to literature because a reaction to form the Cr2Nb dispersoids is required during the in-situ alloying. Both reaction completion rate and how input energy from the AM process influences the reaction progress will be evaluated. Ultimately, expansion of in-situ alloying capabilities provides further insight to develop novel materials using AM.

David Steven Scannapieco↗

NASA NTRS2016

Atmosphere Processing Module Automation and Catalyst Durability Analysis for Mars ISRU Pathfinder

The Mars In-Situ Resource Utilization Pathfinder was designed to create fuel using components found in the planet’s atmosphere and regolith for an ascension vehicle to return a potential sample return or crew return vehicle from Mars. The Atmosphere Processing Module (APM), a subunit of the pathfinder, uses cryocoolers to isolate and collect carbon dioxide from Mars simulant gas. The carbon dioxide is fed with hydrogen into a Sabatier reactor where methane is produced. The APM is currently undergoing the final stages of testing at Kennedy Space Center prior to process integration testing with the other subunits of the pathfinder. The automation software for the APM cryocoolers was tested and found to perform nominally. The catalyst used for the Sabatier reactor was investigated to determine the factors contributing to catalyst failure. The results from the catalyst testing require further analysis, but it appears that the rapid change in temperature during reactor start up or the elevated operating temperature is responsible for the changes observed in the catalyst.

Atmosphere Processing Module↗