Inviscid hypersonic flow around blunt bodies.
Nonequilibrium flow, angles of attack and vapor injection effects on subsonic flow field of blunt body
FLOW FIELD↗
SEARCH · Engineering Papers
Results for “hypersonic flow”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Application of Lax's finite-difference method to nonequilibrium hypersonic flow problems
Finite difference method for unsteady flows applied to steady state equations for supersonic region of inviscid flow past two-dimensional and axisymmetric bodies
FINITE DIFFERENCE METHOD↗
Lee-surface vortex effects over configurations in hypersonic flow.
The role of vortices in producing intense localized hea ting to the leeward regions of a variety of configurations is shown and discussed. From experimental results, flow-field models are proposed which account for the interaction of the vortex and the upper surface boundary layer; correlation of the heating is then possible for planar delta wings. Guidelines derived from these studies are offered which reduce the vortex-induced heating by appropriate shaping of configurations such as the space shuttle. Reynolds number is shown to exert a large influence on the magnitude and location of the induced heating.
Whitehead, A. H., Jr.↗
Analytical and experimental studies of shock interference heating in hypersonic flows
An analytical and experimental study is presented of the aerodynamic heating resulting from six types of shock interference patterns encountered in high speed flow. Centerline measurements of pressure and heat transfer distributions on basic bodies were obtained in four wind tunnels for Mach numbers from 6 to 20, specific heat ratios from 1.27 to 1.67, and free stream Reynolds numbers from 3 million to 25.6 million per meter. Peak heating and peak pressures up to 17 and 7.5 times stagnation values, respectively, were measured. In general, results obtained from semiempirical methods developed for each of the six types of interference agreed with the experimental peaks.
Keyes, J. W.↗
Transition fixing for hypersonic flow
Explore the source record for details and available documents.
Sterrett, J. R.↗
Results of investigations on a 0.010-scale 140A/B configuration space shuttle vehicle orbiter model 72-0 in the NASA/Langley Research Center continuous flow hypersonic tunnel (OA90)
Data are documented which were obtained during wind tunnel tests. The test was conducted beginning 4 March and ending 6 March 1974 for a total of 24 occupancy hours. all test runs were conducted at a Mach number of 10.3 and at Reynolds numbers of 0.65, 1.0 and 1.33 million per foot. Only the complete 140A/B was tested with various elevon, speedbrake, and bodyflap settings at angles of attack from 12 to 37 degrees at 0 and -5 degrees of beta, and from 0 to -9 degrees of beta at 20 and 30 degrees angle of attack. The purpose was to obtain hypersonic longitudinal and lateral-directional stability and control characteristics of the updated space shuttle vehicle configuration.
Hawthorne, P. J.↗
Hypersonic flows generated by parabolic and paraboloidal shock waves
A computer algorithm has been developed to determine the blunt-body flowfields supporting symmetric parabolic and paraboloidal shock waves at infinite free-stream Mach number. Solutions are expressed in an analytic form as high-order power series, in the coordinate normal to the shock, whose coefficients can be determined exactly. Analytic continuation is provided by the use of Pade approximations. Test cases provide solutions of very high accuracy. In the axisymmetric case for gamma equals 715 the solution has been found far downstream, where it agrees with the modified blast-wave results. For plane flow, on the other hand, a limit line appears within the shock layer, a short distance past the sonic line, suggesting the presence of an imbedded shock. Local solutions in the downstream limit are discussed.
Schwartz, L. W.↗
Second-order small-disturbance solutions for hypersonic flow over power-law bodies
Similarity solutions were found which give the adiabatic flow of an ideal gas about two-dimensional and axisymmetric power-law bodies at infinite Mach number to second order in the body slenderness parameter. The flow variables were expressed as a sum of zero-order and perturbation similarity functions for which the axial variations in the flow equations separated out. The resulting similarity equations were integrated numerically. The solutions, which are universal functions, are presented in graphic and tabular form. To avoid a singularity in the calculations, the results are limited to body power-law exponents greater than about 0.85 for the two-dimensional case and 0.75 for the axisymmetric case. Because of the entropy layer induced by the nose bluntness (for power-law bodies other than cones and wedges), only the pressure function is valid at the body surface. The similarity results give excellent agreement with the exact solutions for inviscid flow over wedges and cones having half-angles up to about 20 deg. They give good agreement with experimental shock-wave shapes and surface-pressure distributions for 3/4-power axisymmetric bodies, considering that Mach number and boundary-layer displacement effects are not included in the theory.
Townsend, J. C.↗
Improved electron-beam probe for hypersonic flows
Probe uses differentially-pumped drift tube to connect high and low pressure regions thereby allowing higher gas densities to be studied. System uses higher beam voltages (50 kV) and currents (1 mA delivered to gas), and extends boundary layer penetration up to 15.2 cm, and test duration to one hour.
Mcronald, A. D.↗
Navier-Stokes calculations for laminar and turbulent hypersonic flow over indented nosetips
A time-accurate finite-difference Navier-Stokes code has been used to calculate the viscous flow over a severely indented blunt body in a supersonic stream. An algebraic turbulence model is used and the results are compared with experimental data from wind-tunnel tests. Qualitative agreement is obtained for the surface pressure distribution and flow-field structure, including the separated bubble in the indented region. However, uncertainties still exist in the heating calculations, which are attributed to the turbulence model. For both laminar and turbulent calculations, the flow exhibits a fundamental unsteady character at a frequency of about 50 kHz.
Rakich, J. V.↗
Computer simulation of hypersonic flow over the Space Shuttle Orbiter
Computer simulations of the flow field around the Space Shuttle Orbiter are described. Results of inviscid calculations are presented for the shock wave pattern and bottom centerline pressure distribution at 30 deg angle of attack. Results of viscous calculations are presented for wall pressure and heat transfer distributions for simple configurations representative of regions where shock wave-boundary layer interactions occur. The computer codes are verified by comparisons with wind-tunnel data and can be applied to flight conditions.
Inouye, M.↗
A hybridized method for computing high-Reynolds-number hypersonic flow about blunt bodies
A hybridized method for computing the flow about blunt bodies is presented. In this method the flow field is split into its viscid and inviscid parts. The forebody flow field about a parabolic body is computed. For the viscous solution, the Navier-Stokes equations are solved on orthogonal parabolic coordinates using explicit finite differencing. The inviscid flow is determined by using a Moretti type scheme in which the Euler equations are solved, using explicit finite differences, on a nonorthogonal coordinate system which uses the bow shock as an outer boundary. The two solutions are coupled along a common data line and are marched together in time until a converged solution is obtained. Computed results, when compared with experimental and analytical results, indicate the method works well over a wide range of Reynolds numbers and Mach numbers.
Weilmuenster, K. J.↗
An experimental investigation of hypersonic flow over biconics at incidence and comparison to prediction
Pressure distributions, aerodynamic coefficients, shock shapes, and oil-flow patterns were measured on spherically blunted, 12.84 deg/7 deg on-axis and bent biconics at Mach 6 in air. The angle of attack, referenced to the axis of the aft-cone, was varied from -10 to 40 deg in nominal 5 deg increments. Predictions from an inviscid flowfield computer code referred to as STEIN and codes which solve the three-dimensional parabolized Navier Stokes (PNS) equations were compared with measurement. Three PNS codes were found which provided accurate predictions of windward and leeward pressure distributions for angles of attack to 25 deg.
Miller, C. G.↗
Aerothermal environment in control surface gaps in hypersonic flow: An overview
Experimental and analytical research to develop an understanding of the fluid and thermal environment in control surface gaps such as the spanwise gap of the wing elevon and chordwise gap of a split elevon configuration typical of the Space Shuttle are summarized. Although the experimental and analytical studies were initiated too late to significantly impact the Shuttle design they do provide a fundamental understanding of the basic fluid/thermal environment in control surface gaps and help to establish a firm data base for vehicle design.
Wieting, A. R.↗
Aerothermal environment in control surface gaps in hypersonic flow - An overview
Experimental and analytical research by the NASA Langley Research Center to develop an understanding of the fluid and thermal environment in control surface gaps such as the spanwise gap of the wing elevon and chordwise gap of a split elevon configuration typical of the Space Shuttle are summarized. Although the experimental and analytical studies were initiated too late to significantly impact the basic Shuttle design they do provide a fundamental understanding of the basic fluid/thermal environment in control surface gaps and help to establish a firm data base for future vehicle design.
Wieting, A. R.↗
Heating distributions for a 0.006-scale Shuttle Orbiter over a range of hypersonic flow conditions
Previously cited in issue 15, p. 2342, Accession no. A82-31855
Miller, C. G.↗
Development of computer models for correlating data of film cooling of nose cone under hypersonic flow
A 12.5 degree half cone with tangential slot injection at Mach 6.95 was studied to determine the heating rates to the surface of the body near and far downstream of the slot. The cone had a zero degree angle of attack. The heating rates were obtained using a computer program that was developed at NASA-Langley Research Center. The concentration of nitrogen from the slot into the boundary layer was also determined. The ratio of slot to freestream was varied to determine its effect on heating. The numerical heating rates were compared to other correlations obtained from experimental studies as well as theoretical laminar and turbulent results.
Sharpe, L., Jr.↗
Enhancements to Program LAURA for computation of three-dimensional hypersonic flow
Changes to Program Laura (Langley Aerothermodynamic Upwind Relaxation Algorithm) are presented which enhance both stability and accuracy of the algorithm. A discussion of iteration/sweeping strategies and their relation to computer architectures is included to best exploit the capabilities of serial, vector, and parallel processor machines. Test cases for Mach 10 perfect gas flow and Mach 32 real gas flow in chemical nonequilibrium over a blunt, raked elliptic cone using the thin-layer Navier-Stokes equations are presented in order to demonstrate the current improved capabilities. Algorithm changes include the use of volume averaging, application of a symmetric total variation diminishing (TVD) scheme, and stronger interaction between the grid/shock alignment routine and the relaxation algorithm. Good comparisons with heat transfer and pitching moment data at three different angles of attack for the Mach 10 tests serve to further validate the present algorithm. Parameters are defined which control the coupling of the specie continuity equations with the solution of the mixture conservation equations. A discussion of the consequences involved in the choice of strong versus weak coupling is presented, and a sample nonequilibrium calculation on a fine grid over a full scale model of the Aeroassist Flight Experiment (AFE) demonstrates current capabilities.
Gnoffo, Peter A.↗