Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “frost”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

(abstract) Variations in Polarimetric Backscatter of Saline Ice Grown Under Diurnal Thermal Cycling Condition

An experiment was carried out in January 1994 at the Geophysical Research Facility in the Cold Regions Research and Engineering Laboratory. To investigate effects on polarimetric scattering signatures of sea ice growth under diurnal temperature variations, an ice sheet was grown for 2.5 days for the thickness of 10 cm and a polarimetric radar operating at C-band was used to obtain backscattering data in conjunction with ice-characterization measurements. The ice sheet was grown in the late morning of January 19, 1994. The initial growth rate was slow due to high insolation and temperature. As the air temperature dropped during the night, the growth rate increased significantly. The air temperature changed drastically from about -10(deg)C to -35(deg)C between day and night. The temperature cycle was repeated during the next day and the growth rate varied in the same manner. The surface of the ice was partially covered by frost flowers and the areal coverage increased as the ice became thicker. Throughout the ice growth duration of 2.5 days, polarimetric backscatter data were collected at roughly every centimeter of ice growth. For each set of radar measurements of saline ice, a set of calibration measurements was carried out with trihedrial corner reflectors and a metallic sphere. Measured polarimetric backscattering coefficients of the ice sheet reveal a strong correlation between radar data and temperature variations. As the temperature increased (decreased), the backscatter increased (decreased) correspondingly. From the ice-characterization data, temperatures of the air, at the ice-air interface, and in the ice layer had the same variation trend. Another interesting experimental observation is that the salinity measured as a function of ice depth from a sample of 10-cm thich ice indicated that the salinity variations had a similar cycle as the temperature; i.e., the salinity profile recorded the history of the temperature variations. Characterization data of the ice sheet are used in a theoretical model for scattering from saline ice with frost cover to explain the observed polarimetric signatures.

characterization polarimetric radar salinity tempe↗

Seasonally Active Slipface Avalanches in the North Polar Sand Sea of Mars: Evidence for a Wind-Related Origin

Meter-scale MRO/HiRISE camera images of dune slipfaces in the north polar sand sea of Mars reveal the presence of deep alcoves above depositional fans. These features are apparently active under current climatic conditions, because they form between observations taken in subsequent Mars years. Recently, other workers have hypothesized that the alcoves form due to destabilization and mass-wasting during sublimation of CO2 frost in the spring. While there is evidence for springtime modification of these features, our analysis of early springtime images reveals that over 80% of the new alcoves are visible underneath the CO2 frost. Thus, we present an alternative hypothesis that formation of new alcoves and fans occurs prior to CO2 deposition. We propose that fans and alcoves form primarily by aeolian processes in the mid- to late summer, through a sequence of aeolian deposition on the slipface, over-steepening, failure, and dry granular flow. An aeolian origin is supported by the orientations of the alcoves, which are consistent with recent wind directions. Furthermore, morphologically similar but much smaller alcoves form on terrestrial dune slipfaces, and the size differences between the terrestrial and Martian features may reflect cohesion in the near-subsurface of the Martian features. The size and preservation of the largest alcoves on the Martian slipfaces also support the presence of an indurated surface layer; thus, new alcoves might be sites of early spring CO2 sublimation and secondary mass-wasting because they act as a window to looser, less indurated materials that warm up more quickly in the spring.

Horgan, Briony H. N.↗

The Phoenix TECP Relative Humidity Sensor: Revised Results

The original calibration function of the RH sensor on the Phoenix mission's Thermal and Electrical Conductivity Sensor (TECP), has been revised to correct the erroneously-published original calibration equation, to demonstrate the value of this unique data set, and to improve characterization of H2O exchange between the martian regolith and atmosphere. TECP returned two data streams, the temperature of the electronics analog board (Tb) and the digital 12-bit output of the RH sensor (DN), both of which are required to uniquely specify the H2O abundance. Because the original flight instrument calibration was performed against a pair of hygrometers that measured frost point (Tf), the revised calibration equation is also cast in terms of frost point. The choice of functional form for the calibration function is minimally constrained. A series of profiles across the calibration data cloud at constant DN and Tb does not reveal any evidence of a complex functional form. Therefore, a series of polynomials in both DN and Tb was investigated, along with several non-linear functions of DN and Tb.

Phoenix mission↗

The Giant Planet Satellite Exospheres

Exospheres are relatively common in the outer solar system among the moons of the gas giant planets. They span the range from very tenuous, surface-bounded exospheres (e.g., Rhea, Dione) to quite robust exospheres with exobase above the surface (e.g., lo, Triton), and include many intermediate cases (e.g., Europa, Ganymede, Enceladus). The exospheres of these moons exhibit an interesting variety of sources, from surface sputtering, to frost sublimation, to active plumes, and also well illustrate another common characteristic of the outer planet satellite exospheres, namely, that the primary species often exists both as a gas in atmosphere, and a condensate (frost or ice) on the surface. As described by Yelle et al. (1995) for Triton, "The interchange of matter between gas and solid phases on these bodies has profound effects on the physical state of the surface and the structure of the atmosphere." A brief overview of the exospheres of the outer planet satellites will be presented, including an inter-comparison of these satellites exospheres with each other, and with the exospheres of the Moon and Mercury.

McGrath, Melissa A.↗

A Revised Calibration Function and Results for the Phoenix Mission TECP Relative Humidity Sensor

The original calibration function of the R(sub H) sensor on the Phoenix Thermal and Electrical Conductivity Sensor (TECP) has been revised in order to extend the range of the valid calibration, and to improve accuracy. The original function returned non-physical R(sub H) values at the lowest temperatures. To resolve this, and because the original calibration was performed against a pair of hygrometers that measured frost point (T(sub f)), the revised calibration equation is also cast in terms of frost point. Because of the complexity of maintaining very low temperatures and high R(sub H) in the laboratory, no calibration data exists at T is greater than 203K. However, sensor response during the mission was smooth and continuous down to 181 K. Therefore we have opted to include flight data in the calibration data set; selection was limited to data acquired during periods when the atmosphere is known to have been saturated. T(sub f) remained below 210 K throughout the mission(P is greater than 0.75 Pa). R(sub H), conversely, ranged from 1 to well under 0.01 diurnally, due to approximately 50 K temperature variations. To first order, both vapor pressure and its variance are greater during daylight hours. Variance in overnight humidity is almost entirely explained by temperature, while atmospheric turbulence contributes substantial variance to daytime humidity. Likewise, data gathered with the TECP aloft reflect higher H2O abundances than at the surface, as well as greater variance. There is evidence for saturation of the atmosphere overnight throughout much of the mission. In virtually every overnight observation, once the atmosphere cooled to T(sub f), water vapor begins to decrease, and tracks air temperature. There is no evidence for substantial decreases in water vapor prior to saturation, as expected for adsorptive exchange. Likewise, there is no evidence of local control of vapor by phases such as perchlorate hydrates hydrated minerals. The daytime average H2O pressure does not change substantially over the course of the mission, although the H2O column abundance varies by a factor of 2. Column abundances calculated from TECP data are lower than orbital measurements if one assumes that H2O is uniformly mixed through a single scale height. These results argue that the vertical distribution of H2O begins to change well in advance of surface concentrations as northern autumn approaches.

Phoenix Thermal and Electrical Conductivity Sensor↗

Variability of Phenology and Fluxes of Water and Carbon with Observed and Simulated Soil Moisture in the Ent Terrestrial Biosphere Model (Ent TBM Version 1.0.1.0.0)

The Ent Terrestrial Biosphere Model (Ent TBM) is a mixed-canopy dynamic global vegetation model developed specifically for coupling with land surface hydrology and general circulation models (GCMs). This study describes the leaf phenology submodel implemented in the Ent TBM version 1.0.1.0.0 coupled to the carbon allocation scheme of the Ecosystem Demography (ED) model. The phenology submodel adopts a combination of responses to temperature (growing degree days and frost hardening), soil moisture (linearity of stress with relative saturation) and radiation (light length). Growth of leaves, sapwood, fine roots, stem wood and coarse roots is updated on a daily basis. We evaluate the performance in reproducing observed leaf seasonal growth as well as water and carbon fluxes for four plant functional types at five Fluxnet sites, with both observed and prognostic hydrology, and observed and prognostic seasonal leaf area index. The phenology submodel is able to capture the timing and magnitude of leaf-out and senescence for temperate broadleaf deciduous forest (Harvard Forest and Morgan- Monroe State Forest, US), C3 annual grassland (Vaira Ranch, US) and California oak savanna (Tonzi Ranch, US). For evergreen needleleaf forest (Hyytiäla, Finland), the phenology submodel captures the effect of frost hardening of photosynthetic capacity on seasonal fluxes and leaf area. We address the importance of customizing parameter sets of vegetation soil moisture stress response to the particular land surface hydrology scheme. We identify model deficiencies that reveal important dynamics and parameter needs.

Soil moisture↗

Reliable Ignition of LOX Methane Propellants in Thermal Vacuum Environment

The goal of this project is to demonstrate reliable ignition of liquid oxygen-liquid methane at thermal vacuum conditions using a coil-on-plug (COP) sparking exciter. Testing will be performed using EP’s Frost-Mint cryogenic propellant test stand, using an engine updated based on data collected from previous engine testing at Plum Brook Station, to determine conditions under which the cryogenic propellants will consistently and reliably ignite. In FY22 the project successfully completed the following milestones. The cryogenic test stand Frost-Mint was upgraded to include an integrated vacuum tube and liquid nitrogen cooling system enabling cold vacuum ignition testing. The Integrated GN2/LN2 Ultra-Low-temperature Enclosure (IGLUE), a custom-built close-coupled heater exchanger shroud was designed, fabricated, tested and integrated into the test stand. The vacuum tube and IGLUE enabled the thruster body and propellants to be conditioned to temperatures and pressures desired. This work recreated the no-light conditions experienced during vehicle-level thermal vacuum testing and obtained thruster performance data and ignition imagery.

liquid oxygen↗

Reliable Ignition of LOX-LCH4 Propellants

No cryogenic Reaction Control System (RCS) has ever flown in space. Cryogenic propellants are baselined by HLS and CLPS partners and are the key use case for future ISRU manufactured propellants. A reliable LOX/LCH 4 RCS is an enabling technology for human Lunar and Mars exploration. In previous thermal vacuum (<275 F, <10 torr) testing at NASA GRC Plum Brook, the team uncovered anomalous LOX/LCH4 engine ignition phenomena where flame kernels quenched at these ultra cold hardware temperatures, leading to many pulses where the engines would not light. In 2022, the project was able to recreate the no light condition with an upgraded Frost-Mint test stand at JSC. This project implemented test stand improvements and procured propellants and follow on engine components for a hot fire campaign beginning in November 2024 which will attempt to ignite the RCS engine at ultra cold vacuum conditions by modifying the engine mixture ratio. New modeling techniques were implemented to account for past no lights and are an enabling method to make lunar surface go no go predictions based on hardware conditions. This was enabled by significant improvements to the Frost Mint system, which reduced moisture build up and leaks, increased propellant availability, leading to more attempts at thermal vacuum hot-fires.

Propulsion↗

New Directions: GEIA’s 2020 Vision for Better Air Emissions Information

We are witnessing a crucial change in how we quantify and understand emissions of greenhouse gases and air pollutants, with an increasing demand for science-based transparent emissions information produced by robust community efforts. Today’s scientific capabilities, with near-real-time in-situ and remote sensing observations combined with forward and inverse models and a better understanding of the controlling processes, are contributing to this transformation and providing new approaches to derive, verify, and forecast emissions (Tong et al., 2011; Frost et al., 2012) and to quantify their impacts on the environment (e.g., Bond et al., 2013). At the same time, the needs for emissions information and the demands for their accuracy and consistency have grown. Changing economies, demographics, agricultural practices, and energy sources, along with mandates to evaluate emissions mitigation efforts, demonstrate compliance with legislation, and verify treaties, are leading to new challenges in emissions understanding. To quote NOAA Senior Technical Scientist David Fahey, "We are in the Century of Accountability. Emissions information is critical not only for environmental science and decision-making, but also as an instrument of foreign policy and international diplomacy." Emissions quantification represents a key step in explaining observed variability and trends in atmospheric composition and in attributing these observed changes to their causes. Accurate emissions data are necessary to identify feasible controls that reduce adverse impacts associated with air quality and climate and to track the success of implemented policies. To progress further, the international community must improve the understanding of drivers and contributing factors to emissions, and it must strengthen connections among and within different scientific disciplines that characterize our environment and entities that protect the environment and influence further emissions. The Global Emissions InitiAtive, GEIA (http://www.geiacenter.org/), is a center for emissions information exchange and competence building created in 1990 in response to the need for high quality global emissions data (Graedel et al., 1993). While the past two decades have seen considerable progress in developing, improving and assessing emission estimates, emissions continue to be a major contributor to overall uncertainty in atmospheric model simulations. Moving forward, GEIA aims to help build emissions knowledge in a rapidly evolving society by: 1) enhancing understanding, quantification, and analysis of emissions processes; 2) improving access to emissions information; and 3) strengthening the community of emissions groups involved in research, assessment, operations, regulation and policy.

Frost, G. J.↗

Application of neutron imaging to investigate fundamental aspects of durability of cement-based materials: A review

Service life and durability of reinforced concrete structures have become crucial issues in all industrialized countries because of their economic and ecological relevance. Limited durability is frequently due to deterioration of steel and cement-based materials, such as mortar and concrete, by interactions with water and aggressive aqueous solutions. Neutron imaging has proved to be a powerful non-destructive technique to study quantitatively water content and water movement in porous materials. A neutron beam is much more attenuated by hydrogen in water than by most other elements present in cement-based materials. In this review, focus is placed on applications of both two-dimensional neutron radiography and three-dimensional neutron tomography to investigate specific aspects of durability and deterioration of cement-based materials. Examples of results obtained by qualitative and quantitative investigations of moisture movement in cracked and uncracked cement-based materials are presented. Self-healing, efficiency of water repellent treatment, internal curing, frost damage, fire spalling, ettringite formation and observations of various reinforced concrete components are addressed. The results obtained by neutron imaging provide a solid basis for better understanding of deterioration mechanisms of cement-based materials. Recent improvements of neutron imaging facilities have allowed unexpected possibilities to study complex processes in cement-based materials. The potential for further research based on this promising technology is outlined and discussed.

36 MATERIALS SCIENCE↗

Meson photoproduction from the nucleon at CLAS

The excitation spectrum of the nucleon provides a stringent constraint on the dynamics and interactions of its internal constituents and therefore probes the mechanism of confinement in the light quark sector. Our detailed knowlege of this excitation spectrum is poor, with many predicted states not yet observed in experiment and many 'established' states having poorly known properties. To address these shortcomings a worldwide effort is currently underway exploiting the latest generation of electron and photon beams in detailed studies of meson photoproduction from nucleon targets. A major contribution to this effort will come from the experimental programme at Jefferson Lab exploiting the frozen spin target (FROST) with the CLAS spectrometer. The status of this project will be presented along with preliminary results and analyses.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Freeze range of a condensing gas propagating in a liquid helium-cooled tube

Understanding air propagation and condensation following a catastrophic vacuum break in particle accelerator beamlines cooled by liquid helium is crucial for maintaining the operational safety of these facilities. Previous experimental investigations on nitrogen gas propagation in both normal liquid helium (He I) and superfluid helium (He II) cooled copper tubes unveiled a nearly exponential deceleration of the gas propagation. A comprehensive theoretical model incorporating gas dynamics, heat transfer, and condensation mechanisms has been developed, which effectively reproduces various key experimental observations. An intriguing phenomenon uncovered in our model simulation is that the gas propagation appears to nearly stop beyond a certain distance from the location where condensation starts. We refer to this distance as the freeze range. In this paper, we present our systematic study of the freeze range at various inlet mass fluxes and tube diameters. We show that the results can be well described by a simple correlation. The underlying physical mechanism that supports this useful correlation is explained. Knowing the freeze range may allow accelerator engineers to develop protocols for controlling frost-layer contamination in the beamline tubes, which is of great practical importance.

43 PARTICLE ACCELERATORS↗

Hydrogen bond symmetrization and equation of state of phase D

We have synthesized phase D at 24 GPa and at temperatures of 1250-1100 C in a multianvil press under conditions of high silica activity. The compressibility of this high-silica-activity phase D (Mg{sub 1.0}Si{sub 1.7}H{sub 3.0}O{sub 6}) has been measured up to 55.8 GPa at ambient temperature by powder X-ray diffraction. The volume (V) decreases smoothly with increasing pressure up to 40 GPa, consistent with the results reported in earlier studies. However, a kink is observed in the trend of V versus pressure above {approx}40 GPa, reflecting a change in the compression behavior. The data to 30 GPa fit well to a third-order Birch-Murnaghan equation of state (EoS), yielding V{sub o} = 85.1 {+-} 0.2 {angstrom}{sup 3}; K{sub o} = 167.9 {+-} 8.6 GPa; and K{prime}{sub o} = 4.3 {+-} 0.5, similar to results for Fe-Al-free phase D reported by Frost and Fei (1999). However, these parameters are larger than those reported for Fe-Al-bearing phase D and for Fe-Al-free phase D. The abnormal volume change in this study may be attributed to the reported hydrogen bond symmetrization in phase D. Fitting a third-order Birch-Murnaghan EoS to the data below 30 GPa yields a bulk modulus K{sub o} = 173 (2) GPa for the hydrogen-off-centered (HOC) phase and K{sub o} = 212 (15) GPa for the data above 40 GPa for the hydrogen-centered (HC) phase, assuming K{prime}{sub o} is 4. The calculated bulk modulus K{sub o} of the HC phase is 18% larger than the bulk modulus K{sub o} of the HOC phase.

08 HYDROGEN↗

Modeling Io's Sublimation-Driven Atmosphere: Gas Dynamics and Radiation Emission

Io's sublimation-driven atmosphere is modeled using the direct simulation Monte Carlo method. These rarefied gas dynamics simulations improve upon earlier models by using a three-dimensional domain encompassing the entire planet computed in parallel. The effects of plasma impact heating, planetary rotation, and inhomogeneous surface frost are investigated. Circumplanetary flow is predicted to develop from the warm subsolar region toward the colder night-side. The non-equilibrium thermal structure of the atmosphere, including vibrational and rotational temperatures, is also presented. Io's rotation leads to an asymmetric surface temperature distribution which is found to strengthen circumplanetary flow near the dusk terminator. Plasma heating is found to significantly inflate the atmosphere on both day- and night-sides. The plasma energy flux also causes high temperatures at high altitudes but permits relatively cooler temperatures at low altitudes near the dense subsolar point due to plasma energy depletion. To validate the atmospheric model, a radiative transfer model was developed utilizing the backward Monte Carlo method. The model allows the calculation of the atmospheric radiation from emitting/absorbing and scattering gas using an arbitrary scattering law and an arbitrary surface reflectivity. The model calculates the spectra in the {nu}{sub 2} vibrational band of SO{sub 2} which are then compared to the observational data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The target asymmetry P_z in {gamma}p-->p{pi}^+{pi}^- with the CLAS spectrometer at Jefferson Laboratory

The study of baryon resonances provides a deeper understanding of the strong interaction because the dynamics and relevant degrees of freedom hidden within them are reflected by the properties of the excited states of baryons. Higher-lying excited states at and above 1.9 GeV/c{sup 2} are generally predicted to have strong couplings to the {pi}{pi}N final states via {pi}{Delta} or {rho}N intermediate states. Double-pion photoproduction is therefore important to find and investigate properties of highmass resonances. The CLAS g9a (FROST) experiment, as part of the N* spectroscopy program at Jefferson Laboratory (JLab), has accumulated photoproduction data using linearly- and circularly-polarized photons incident on a longitudinally-polarized butanol target in the photon energy range 0.3 to 2.4 GeV. In this contribution, the extraction of the target asymmetry for the reaction {gamma}p {yields} p{pi}{sup +}{pi}{sup -} will be described and preliminary results will be presented.

43 PARTICLE ACCELERATORS↗

Chemically-bonded brick production based on burned clay by means of semidry pressing

We presented a study on the possibility of using the burnt rocks of the Krasnoyarsk Territory for production of chemically-bonded materials in the form of bricks which are so widely used in multistory housing and private house construction. The radiographic analysis of the composition of burnt rock was conducted and a modifier to adjust the composition uniformity was identified. The mixing moisture content was identified and optimal amount at 13-15% was determined. The method of semidry pressing has been chosen. The process of obtaining moldings has been theoretically proved; the advantages of chemically-bonded wall materials compared to ceramic brick were shown. The production of efficient artificial stone based on material burnt rocks, which is comparable with conventionally effective ceramic materials or effective with cell tile was proved, the density of the burned clay-based cell tile makes up to 1630-1785 kg \ m{sup 3}, with compressive strength of 13.6-20.0 MPa depending on the compression ratio and cement consumption, frost resistance index is F50, and the thermal conductivity in the masonry is λ = 0,459-0,546 W \ m {sup *} °C. The clear geometric dimensions of pressed products allow the use of the chemically-bonded brick based on burnt clay as a facing brick.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Cutting edge research and new technologies in heat and mass transfer processes of refrigeration and air conditioning systems

This special edition of the Science and Technology for the Built Environment (STBE) presents eight selected articles originally presented at the 17th International Refrigeration and Air Conditioning Conference held at Purdue University, West Lafayette, IN, USA, during July 9–12, 2018. All eight articles were significantly expanded with additional technical content and received full peer review before being finally accepted for publication in this special issue of the STBE. The eight articles in this special issue cover a wide range of topics from condensation and evaporation of low global warming potential (LGWP) refrigerants to phase change material storage for personal cooling systems, from frosting on hydrophilic and hydrophobic coated surfaces to geometry optimization of heat exchanger fins. Furthermore, these articles describe cutting-edge research and feasibility studies of new technologies that were recently investigated for refrigeration and air conditioning applications.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

DIRECT DETECTIONS OF YOUNG STARS IN NEARBY ELLIPTICAL GALAXIES

Small amounts of star formation in elliptical galaxies are suggested by several results: surprisingly young ages from optical line indices, cooling X-ray gas, and mid-infrared dust emission. Such star formation has previously been difficult to directly detect, but using ultraviolet Hubble Space Telescope Wide Field Camera 3 imaging, we have identified individual young stars and star clusters in four nearby ellipticals. Ongoing star formation is detected in all galaxies, including three ellipticals that have previously exhibited potential signposts of star-forming conditions (NGC 4636, NGC 4697, and NGC 4374), as well as the typical ''red and dead'' NGC 3379. The current star formation in our closest targets, where we are most complete, is between 2.0 and 9.8 Multiplication-Sign 10{sup -5} M{sub Sun} yr{sup -1}. The star formation history was roughly constant from 0.5 to 1.5 Gyr (at (3-5) Multiplication-Sign 10{sup -4} M{sub Sun} yr{sup -1}), but decreased by a factor of several in the past 0.3 Gyr. Most star clusters have a mass between 10{sup 2} and 10{sup 4} M{sub Sun }. The specific star formation rates of {approx}10{sup -16} yr{sup -1} (at the present day) or {approx}10{sup -14} yr{sup -1} (when averaging over the past Gyr) imply that a fraction 10{sup -8} of the stellar mass is younger than 100 Myr and 10{sup -5} is younger than 1 Gyr, quantifying the level of frosting of recent star formation over the otherwise passive stellar population. There is no obvious correlation between either the presence or spatial distribution of postulated star formation indicators and the star formation we detect.

79 ASTRONOMY AND ASTROPHYSICS↗