Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “flux analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1978

Simulation studies of wide and medium field of view earth radiation data analysis

A parameter estimation technique is presented to estimate the radiative flux distribution over the earth from radiometer measurements at satellite altitude. The technique analyzes measurements from a wide field of view (WFOV), horizon to horizon, nadir pointing sensor with a mathematical technique to derive the radiative flux estimates at the top of the atmosphere for resolution elements smaller than the sensor field of view. A computer simulation of the data analysis technique is presented for both earth-emitted and reflected radiation. Zonal resolutions are considered as well as the global integration of plane flux. An estimate of the equator-to-pole gradient is obtained from the zonal estimates. Sensitivity studies of the derived flux distribution to directional model errors are also presented. In addition to the WFOV results, medium field of view results are presented.

Green, R. N.↗
NASA NTRS1997

FE Line Diagnostics of Multiply Shocked Stellar Atmospheres: The Mira S. Carinae

Extensive LWP-HI spectra were obtained of the Mira S Car at a rapid time cadence as compared with the shock cycle time of S Car. These spectra were obtained in an attempt to understand the velocity structures in the shocked wind using the fluoresced iron lines. Data analysis of the IUE observations, which included the primary calibration of all of the IUE spectra obtained of S Car, was carried out. In addition, line identifications, flux calculations, background subtractions, and line profile analysis as a function of S Car's pulsational phase were performed. The database incorporated all line identifications as a function of pulsation phase for all IUE LWP-HI observations to date of S Car. At least 45 separate iron line features are identified in the S Car spectrum at one or more phases of the shock cycle, including those due to Fe II (UV 161) which is pumped by three different iron lines; Fe I(UV 44) which is pumped by the Mg II k line. Other strong multiplets that have been identified include UV(1), UV(2), UV(5), UV(32), UV(60), UV(63), UV(161), UV(207), and UV(399). Over 300 weaker lines have also been tentatively identified with Fe line transitions.

Bookbinder, Jay↗
NASA NTRS1998

Observations of the Neuton Star RXJ0002.9 + 6246

The High Resolution Imager (HRI) observation of the CTB1 region requested in the original proposal was performed and data received. The primary target, the candidate neutron star, was detected at the predicted intensity. As proposed, both timing and spatial extent analysis has been performed on the extracted photons. The preliminary timing analysis showed no evidence for the faint pulsations seen in the PSPC data. As the pulse fraction was rather small, this was not an unexpected result. We have, however, recently developed more sophisticated timing analysis capabilities and are in the process of reanalyzing the data to more accurately constrain the pulse fraction, if indeed any evidence for pulsation is found. We have supplemented the HRI observations with optical observations. Filter images, in BVR & I, have been obtained as well as spectra for candidate counterparts. As of this writing, the original analysis holds, i.e. the x-ray flux is not consistent with the L(sub x)/L(sub opt) ratios expected from the candidate stars within the 3 sigma positional error circles. HRI confirmation of the flux as well as the refinement of the position have allowed us to limit the candidate list and refine the original L(sub x)/L(sub opt) analysis.

Hailey, Charles J.↗
NASA NTRS1980

A galactic component of the diffuse X-ray flux in the range 2-7 keV

An analysis of the spatial distribution of the 2-7 keV X-ray background measured by Uhuru and reported by Schwartz (1979) is presented. The latitude distribution above 10 deg is consistent with a uniform isotropic component comprising the bulk of the radiation plus a galactic part varying from 3% at /b/ = 20 deg to 1% at /b/ = 90 deg. An analysis was made of the residual background based on the work of Warwick, Pye, and Fabian, in terms of a directional anisotropy as indicated by the Compton-Getting effect; the symmetrical galactic contribution was subtracted in the computations. It was shown that the results are consistent with the solar system moving through the 2-7 keV X-ray sea in the same manner as it appears to move with respect to the 2.7 K radiation.

Protheroe, R. J.↗
NASA NTRS1984

Nimbus-Earth radiation budget instrument analysis

The Wide Field Of View (WFOV) Earth Flux Channels of the Nimbus Earth Radiation Budget (ERB) instrument are studied with the objective of improving the understanding and confidence in the data. Laboratory tests on flight space Earth flux subassemblies followed by a set of in flight verification procedures are examined to see if the laboratory derived correction factors produced consistent results. Intercomparisons between the WFOV data and integrated scanner data as well as other truth are used in these verificaton procedures. The main source of errors are temperature and temperature gradient related offsets. The findings led to construction of a model for the short wave WFOV channel which use instrument temperatures and temperature differences to predict or establish offsets which need to be applied to data reduction algorithms for maximum final data product accuracy.

Maschhoff, R. M.↗
NASA NTRS1992

Flux concentrations on solar dynamic components due to mispointing

Mispointing of the solar dynamic (SD) concentrator designed for use on Space Station Freedom (SSF) causes the optical axis of the concentrator to be nonparallel to the incoming rays from the Sun. This causes solar flux not to be focused into the aperture hole of the receiver and may position the flux on other SSF components. A Rocketdyne analysis has determined the thermal impact of off-axis radiation due to mispointing on elements of the SD module and photovoltaic (PV) arrays. The conclusion was that flux distributions on some of the radiator components, the two-axis gimbal rings, the truss, and the PV arrays could present problems. The OFFSET computer code was used at Lewis Research Center to further investigate these flux distributions incident on components. The Lewis study included distributions for a greater range of mispoint angles than the Rocketdyne study.

Rylicki, Daniel S.↗
NASA NTRS1993

Periodicities in the IUE particle radiation data

The magnetospheric charged particle flux measured serendipitously by the IUE satellite during perigee passages from 1978 February to 1989 February has been searched for periodicities using Fourier transform and correlation techniques. The analysis uncovers persistent modulations of the particle flux with periods of 28-33 days and 15-17 days. The particle flux seen by IUE in the outer van Allen belt is modulated to a significant extent by the magnetosphere's interaction with high-speed solar wind streams from coronal holes, in agreement with analyses of fluxes at other altitudes and of geomagnetic disturbance indices. It is suggested that recurrent global solar-surface activity, such as the 25.8-day periodicity discussed by Bai and Sturrock (1991) and the solar 'hot spots' reported by Bai (1987, 1988, 1990), may play a role in modulating the particle flux near solar maximum.

Arquilla, Richard↗
NASA NTRS1994

Experimental measurements and analytical analysis related to gas turbine heat transfer. Part 1: Time-averaged heat-flux and surface-pressure measurements on the vanes and blades of the SSME fuel-side turbine and comparison with prediction. Part 2: Phase-resolved surface-pressure and heat-flux measurements on the first blade of the SSME fuel-side turbine

Time averaged Stanton number and surface-pressure distributions are reported for the first-stage vane row, the first stage blade row, and the second stage vane row of the Rocketdyne Space Shuttle Main Engine two-stage fuel-side turbine. Unsteady pressure envelope measurements for the first blade are also reported. These measurements were made at 10 percent, 50 percent, and 90 percent span on both the pressure and suction surfaces of the first stage components. Additional Stanton number measurements were made on the first stage blade platform blade tip, and shroud, and at 50 percent span on the second vane. A shock tube was used as a short duration source of heated and pressurized air to which the turbine was subjected. Platinum thin-film heat flux gages were used to obtain the heat flux measurements, while miniature silicon-diaphragm flush-mounted pressure transducers were used to obtain the pressure measurements. The first stage vane Stanton number distributions are compared with predictions obtained using a version of STAN5 and a quasi-3D Navier-Stokes solution. This same quasi-3D N-S code was also used to obtain predictions for the first blade and the second vane.

Source record↗
NASA NTRS1960

Heat Transfer to Longitudinal Laminar Flow Between Cylinders

Consideration is given to the fully developed heat transfer characteristics for longitudinal laminar flow between cylinders arranged in an equilateral triangular array. The analysis is carried out for the condition of uniform heat transfer per unit length. Solutions are obtained for the temperature distribution, and from these, Nusselt numbers are derived for a wide range of spacing-to-diameter ratios. It is found that as the spacing ratio increases, so also does the wall-to-bulk temperature difference for a fixed heat transfer per unit length. Corresponding to a uniform surface temperature around the circumference of a cylinder, the circumferential variation of the local heat flux is computed. For spacing ratios of 1.5 - 2.0 and greater, uniform peripheral wall temperature and uniform peripheral heat flux are simultaneously achieved. A simplified analysis which neglects circumferential variations is also carried out, and the results are compared with those from the more exact formulation.

Sparrow, Ephraim M.↗
NASA NTRS2015

ANTARES Constrains a Blazar Origin of Two IceCube PeV Neutrino Events

Context. The source(s) of the neutrino excess reported by the IceCube Collaboration is unknown. The TANAMI Collaboration recently reported on the multiwavelength emission of six bright, variable blazars which are positionally coincident with two of the most energetic IceCube events. Objects like these are prime candidates to be the source of the highest-energy cosmic rays, and thus of associated neutrino emission. Aims. We present an analysis of neutrino emission from the six blazars using observations with the ANTARES neutrino telescope. Methods. The standard methods of the ANTARES candidate list search are applied to six years of data to search for an excess of muons - and hence their neutrino progenitors - from the directions of the six blazars described by the TANAMI Collaboration, and which are possibly associated with two IceCube events. Monte Carlo simulations of the detector response to both signal and background particle fluxes are used to estimate the sensitivity of this analysis for di erent possible source neutrino spectra. A maximum-likelihood approach, using the reconstructed energies and arrival directions of through-going muons, is used to identify events with properties consistent with a blazar origin. Results. Both blazars predicted to be the most neutrino-bright in the TANAMI sample (1653-329 and 1714-336) have a signal flux fitted by the likelihood analysis corresponding to approximately one event. This observation is consistent with the blazar-origin hypothesis of the IceCube event IC 14 for a broad range of blazar spectra, although an atmospheric origin cannot be excluded. No ANTARES events are observed from any of the other four blazars, including the three associated with IceCube event IC20. This excludes at a 90% confidence level the possibility that this event was produced by these blazars unless the neutrino spectrum is flatter than -2.4.

general↗
NASA NTRS1988

Development of an integrated BEM for hot fluid-structure interaction

One of the most difficult problems in engine structural component durability analysis is the determination of the temperatures and fluxes in the structural components directly in contact with the hot gas flow path. Currently there exists no rational analytical or numerical technique which can effectively deal with this problem. Since the temperature distribution in the structural components are strongly influenced by both the fluid flow and the deformation as well as the cooling system in the structure, the only effective way to deal with this problem is to develop an integrated solid mechanics, fluid mechanics and heat transfer analysis for this problem. Herein, the Boundary Element Method (BEM) is chosen as the basic analysis tool principally because the definition of quantities like fluxes, temperatures, displacements, and velocities are very precise on a boundary based discretization scheme. One fundamental difficulty is that a BEM analysis requires a considerable amount of analytical work which is not present in other numerical methods. During the past year, all of this analytical work was completed and a two dimensional, general purpose code was written. A portion of the work is summarized.

Dargush, G. F.↗
NASA NTRS1994

An evaluation with the Fourier Amplitude Sensitivity Test (FAST) of which land-surface parameters are of greatest importance in atmospheric modeling

Land-surface parameterizations based on a statistical-dynamical have been suggested recently to improve the representation of the surface forcing from heterogeneous land in atmospheric models. With this approach, land-surface characteristics are prescribed by probability density functions (PDFs) rather than single 'representative' values as in 'big-leaf' parameterizations. Yet the use of many PDFs results in an increased computational burden and requires the complex problem of representing covariances between PDFs to be addressed. In this study, a sensitivity analysis of a land-surface parameterization for atmospheric modeling was performed to evaluate the surface parameters most important to the variability of surface heat fluxes. The Fourier amplitude sensitivity test (FAST) used for this analysis determines the relative contribution of individual input parameters to the variance of energy fluxes resulting from a heterogeneous surface. By simultaneously varying all parameters according to their individual probability density functions, the number of computations needed is very much reduced by this technique. This analysis demonstrates that most of the variability of surface heat fluxes may be described by the distributions of relative stomatal conductance and surface roughness. Thus, the statistical-dynamical approach may be simplified by the use of only these two probability density functions.

Collins, Dan C.↗
NASA NTRS2003

Coronal Heating, Spicules, and Solar-B

Falconer et al. investigated the heating of the quiet corona by measuring the increase of coronal luminosity with the amount of the magnetic flux in the underlying network at solar minimum when there were no active regions on the face of the Sun. The coronal luminosity was measured from Fe IX/X - Fe XII pairs of coronal images from SOHO/EIT, under the assumption that practically all of the coronal luminosity in these very quiet regions came from plasma in the temperature range 0.9 x 10(exp 6) K is less than or equal to T is less than or equal to 1.3 x 10(exp 6) K. The network magnetic flux content was measured from SOHO/MDI magnetograms. It was found that luminosity of the corona in these quiet regions increased roughly in proportion to the square root of the magnetic flux content of the network and roughly in proportion to the length of the perimeter of the network flux clumps. From 1) this result; 2) the observed occurrence of many fine-scale explosive events (e.g., spicules) at the edges of network flux clumps; and 3) a demonstration that it is energetically feasible for the heating of the corona in quiet regions to be driven by explosions of granule-sized sheared-core magnetic bipoles embedded in the edges of the network flux clumps, Falconer et al. infer that in quiet regions that are not influenced by active regions the corona is mainly heated by such magnetic activity in the edges of the network flux clumps. From their observational results together with their feasibility analysis, Falconer et al. predict that 1) At the edges of the network flux clumps there are many transient sheared core bipoles of the size and lifetime of granules and having transverse field strengths greater than approx. 100 G; 2) Approx. 30 of these bipoles are present per supergranule; and 3) Most spicules are produced by explosions of these bipoles. The photospheric vector magnetograms, chromospheric filtergrams, and EUV spectra from Solar-B are expected to have sufficient sensitivity, spatial resolution, and cadence to test these predictions. The Falconer et al. (2003) inferred mixed-polarity magnetic flux at the base of spicules is compatible with the observed magnetic structure of Ha macrospicules recently found by Yamuchi et al. (2003).

Moore, Ron↗
NASA NTRS1984

Characteristics of the Fe II and C II emission in high-resolution IUE spectra (2300-3000 A) of Alpha Orionis

A study is presented of Fe II and C II emission features in the 2300-3000 A region of four high-resolution IUE spectra of Alpha Ori obtained during the period 1978 April-1982 November. A set of 42 unmutilated, unblended Fe II lines of multiplets UV 1-3, 32-33, 35-36, and 60-64 and the C II (UV 0.01) intercombination lines have been identified and measured to determine their velocities, fluxes, and asymmetries. A correlation of Fe II line asymmetry with intrinsic line strength indicates a velocity field which is initially constant, then algebraically increases with radius to a maximum value and then decreases significantly before reaching an asymptotic flow speed far from the star. The mean velocity of the chromospheric regions emitting Fe II does not appear to differ substantially from the time-average of the photospheric velocity, but there is evidence that the two regions are not strongly coupled and thus that the chromosphere does not strictly follow the semiperiodic 6 year pulsations of the photosphere. An analysis of the C II line fluxes produces estimates of the electron density in the chromosphere in the range 3.2 x 10 to the 7th-1.3 x 10 to the 8th per sq cm and indicates that the region emitting C II is geometrically thick, extending at least one-tenth, and perhaps as far as 1.2, photospheric radii from the base of the chromosphere.

Carpenter, K. G.↗
NASA NTRS1976

The main magnetic field of Jupiter

The main magnetic field of Jupiter has been measured by the Goddard Space Flight Center flux gate magnetometer on Pioneer 11. Analysis of the data yields a more detailed model than that obtained from Pioneer 10 results. In a spherical harmonic octupole representation the dipole term (with opposite polarity to earth's) has a magnitude of 4.28 G times the radial distance cubed at a tilt angle of 9.6 deg and a system 111 longitude of 232 deg. The quadrupole and octupole moments are 24% and 21% of the dipole, respectively. This leads to a significant deviation of the planetary magnetic field from a simple offset dipole topology at distances of less than three times the radial distance. The north polar field strength is 14 G, and in the Northern Hemisphere the 'footprint' of the Io associated flux tube traverses the magnetic polar region. Associated L shell splitting in the radiation belts, warping of the charged particle equatorial planes, and enhanced absorption effects due to the satellites Amalthea and Io are expected as a result of the field complexity.

Acuna, M. H.↗
NASA NTRS1987

Comparison of measured and modeled radiation, heat and water vapor fluxes: FIFE pilot study

The feasibility of using radio frequency receivers to collect data from automated weather stations to model fluxes of latent heat, sensible heat, and radiation using routine weather data collected by automated weather stations was tested and the estimated fluxes were compared with fluxes measured over wheat. The model Cupid was used to model the fluxes. Two or more automated weather stations, interrogated by radio frequency and other means, were utilized to examine some of the climatic variability of the First ISLSCP (International Satellite Land-Surface Climatology Project) Field Experiment (FIFE) site, to measure and model reflected and emitted radiation streams from various locations at the site and to compare modeled latent and sensible heat fluxes with measured values. Some bidirectional reflected and emitted radiation data were collected from 23 locations throughout the FIFE site. Analysis of these data along with analysis of the measured sensible and latent heat fluxes is just beginning.

Blad, Blaine L.↗
NASA NTRS1992

Mass-Transport Properties In Growth Of Crystals From Vapors

Brief report summarizes results of experimental and theoretical studies of mass-transport properties of GeSe/Gel4 and Hg0.8Cd0.2Te systems in connection with growth of crystals in closed ampoules. Primary emphasis in studies was on thermochemical analyses, on development of mathematical models to predict diffusion-limited mass transport, and on comparison of theoretically predicted with experimental fluxes. Results applied to design, preparation, performance, and analysis of crystal-growth experiments of semiconducting materials on Earth and in outer space. Model extended to predict mass flux and overall composition of transport products of Hg0.8Cd0.2Te transport system.

Wiedemeier, H.↗