Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “flow instability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Wave-particle transport by weak electrostatic flow shear fluctuations

A description is presented of the first consistent theoretical treatment of transport due to weak electrostatic fluctuations from microinstabilities driven by a shear in plasma flow parallel to a uniform magnetic field. The model used considers electrostatic fluctuations in a Vlasov plasma with sheared bulk velocity parallel to a uniform magnetic field. The linear stability theory for the model has been studied by Gary and Schwartz (1980). In the current investigation, a calculation is performed of the wave-particle transport associated with the electrostatic flow shear instability.

Gary, S. P.↗

A general circulation model of a Venus-like atmosphere

Heat and momentum budgets are investigated for a three-dimensional general circulation model of a Venus-like, massive and slowly rotating atmosphere which is forced with an axisymmetric radiative heating/cooling distribution. Model results confirm the suggestions of Gierasch (1975) and Rossow and Williams (1979), with a mean meridional circulation which, despite its multicellular form, interacts with quasi-barotropic eddies produced by zonal flow shear instability to yield a weak superrotation of the entire model atmosphere. This process is sufficiently general to encourage the conclusion that it will occur in all slowly rotating atmospheres. Whether it can accelerate wind speeds as large as those observed on Venus cannot presently be determined.

Rossow, W. B.↗

On transit time instability in liquid jets

A basic transit time instability in flows with disturbances of speed is found. It was shown that the mass distribution is established by and large by the described transit time effects. These transit time effects may also be involved for gas jets.

Grabitz, G.↗

Minimal cosmic background fluctuations implied by streaming motions

The minimal cosmic background radiation (CBR) anisotropy implied by the presence of peculiar motions of a given amplitude on some specified scale is calculated using a new, power spectrum-independent approach. If the tentative evidence for deviations from the Hubble flow of magnitude delta V/V roughly 0.1 at V roughly 5000 km/s is confirmed, microwave background fluctuations with a coherence scale of about 2 deg and dispersion delta T/T greater than 10 to the -5th are predicted. It is found that the existing upper limits on delta T/T are not inconsistent with v(r) = 500 km/s at r = 50/h Mpc. A reduction of the observational limits on the CBR anisotropy below the authors' minimal predictions for delta T/T would challenge the current interpretation of measurements of deviations from the Hubble flow. Gravitational instability without reheating as a mechanism for generation of the large-scale structure of the universe would be in severe difficulty.

Juszkiewicz, Roman↗

Simultaneous density and electric field fluctuation spectra associated with velocity shears in the auroral oval

A detailed study is presented of simultaneous density and electric field fluctuation spectra over a large-scale length range seen in association with large structured convective plasma flows, field-aligned currents, and particle precipitation at high latitudes. The data were obtained for two Dynamics Explorer 2 orbits at two different altitudes within the F region and the topside ionosphere. The observations are compared with results of nonlinear simulations of shear flow-driven instabilities and predictions based on two-dimensional turbulence arguments, with particular reference to the Kelvin-Helmholtz process.

Basu, Sunanda↗

Stability of 3D wing boundary layer on a SST configuration

Tollmien-Schlichting (TS) and cross-flow (CF) instability growth characteristics were studied in three dimensions, for the case of a Mach 2.4 SST with double-delta planform whose inboard leading-edge is subsonic and outboard leading-edge is supersonic. Attention is given to the requirements for supersonic speed laminarization of both highly swept, rounded leading-edge wings and moderately-swept, sharp leading-edge wings. Suction requirements for the control of both TS and CF instabilities are calculated; it is found that while mild suction and surface cooling are effective in TS-instability damping, the CF influence of such techniques is rather weak. CF instability control must be via pressure-distribution tailoring and suction.

Parikh, P. G.↗

Numerical simulation of spatially-evolving instability control in plane channel flow

The applicability of active control by periodic suction-blowing in spatially evolving plane Poiseuille flow is investigated by the direct simulations of the two-dimensional, incompressible Navier-Stokes equations. All the computations were performed for Reynolds number (Re = 7500) which is linearly unstable for this flow. The result reveal that significant reductions in perturbation amplitudes can be obtained by a proper choice of the control wave amplitude and phase even for large disturbance amplitudes. The upstream influence of the control wave is also investigated.

Danabasoglu, G.↗

Real-time measurement of materials properties at high temperatures by laser produced plasmas

Determination of elemental composition and thermophysical properties of materials at high temperatures, as visualized in the context of containerless materials processing in a microgravity environment, presents a variety of unusual requirements owing to the thermal hazards and interferences from electromagnetic control fields. In addition, such information is intended for process control applications and thus the measurements must be real time in nature. A new technique is described which was developed for real time, in-situ determination of the elemental composition of molten metallic alloys such as specialty steel. The technique is based on time-resolved spectroscopy of a laser produced plasma (LPP) plume resulting from the interaction of a giant laser pulse with a material target. The sensitivity and precision were demonstrated to be comparable to, or better than, the conventional methods of analysis which are applicable only to post-mortem specimens sampled from a molten metal pool. The LPP technique can be applied widely to other materials composition analysis applications. The LPP technique is extremely information rich and therefore provides opportunities for extracting other physical properties in addition to the materials composition. The case in point is that it is possible to determine thermophysical properties of the target materials at high temperatures by monitoring generation and transport of acoustic pulses as well as a number of other fluid-dynamic processes triggered by the LPP event. By manipulation of the scaling properties of the laser-matter interaction, many different kinds of flow events, ranging from shock waves to surface waves to flow induced instabilities, can be generated in a controllable manner. Time-resolved detection of these events can lead to such thermophysical quantities as volume and shear viscosities, thermal conductivity, specific heat, mass density, and others.

Kim, Yong W.↗

Modeling Techniques for Evaluation the Effectiveness of Particle Damping in Turbomachinery

High power turbopumps are frequently used to supply propellants to the combustion chambers of rocket engines. Due to the high pressures and flow-rates required, turbopump components are subjected to harsh environments which include dynamic excitation due to random, sine, and acoustic vibration. Additionally, fluid-induced forces can couple with the dynamics of the structure resulting in flow induced instabilities (flutter). Structural response to these forms of excitation results in reduced fatigue life and increases the likelihood of an operational failure. Particle damping has been used successfully on vibration problems in the past by increasing the damping and therefore reducing the response to acceptable levels. Empirical methods have typically been employed to evaluate the performance of the particles in reducing the structural response. This report explores the use of finite element methods to estimate the effectiveness of particle damping in a typical non-rotating turbopump component. Axisymmetric harmonic models are used to estimate the increase in modal damping produced by the addition of particles in the cavity of an axisymmetric seal. Target modes of vibration are evaluated to quantify how the effective particle damping is altered by geometry changes in the seal design. A new method to predict the performance of particle dampers is developed and shown to provide more reasonable estimates of damping.

Ehrgott, R.↗

NASA Common Research Model Test Envelope Extension With Active Sting Damping at NTF

The NASA Common Research Model (CRM) high Reynolds number transonic wind tunnel testing program was established to generate an experimental database for applied Computational Fluid Dynamics (CFD) validation studies. During transonic wind tunnel tests, the CRM encounters large sting vibrations when the angle of attack approaches the second pitching moment break, which can sometimes become divergent. CRM transonic test data analysis suggests that sting divergent oscillations are related to negative net sting damping episodes associated with flow separation instability. The National Transonic Facility (NTF) has been addressing remedies to extend polar testing up to and beyond the second pitching moment break point of the test articles using an active piezoceramic damper system for both ambient and cryogenic temperatures. This paper reviews CRM test results to gain understanding of sting dynamics with a simple model describing the mechanics of a sting-model system and presents the performance of the damper under cryogenic conditions.

Rivers, Melissa B.↗

SAPS-Associated Explosive Brightening on the Duskside: A New Type of Onset- Like Disturbance

Quasi-periodic energetic particle injections have been observed at geosynchronous orbit on the dusk-side during a steady magnetospheric convection event. We examine high-resolution auroral imager data and ground magnetometer data associated with the first of these injections and conclude that it was not associated with classical sub-storm signatures. It is proposed that these injections are caused by the explosive nonlinear growth of a shear flow-ballooning instability in the region where sub-auroral polarization streams (SAPS) also occur. It is suggested that interchange will occur preferentially in the low-conductivity SAPS region since the magnetic Richardson number is lowest there and the "line-tying" effect will also be least stabilizing there. We propose that the observed particle injection signatures and auroral morphology constitute a new type of SAPS-associated explosive "onset-like" disturbance that can occur during intervals of strong convection.

Henderson, M. G.↗

The Dynamics of Miscible Interfaces: Simulations

This research project focuses on the dynamics of interfacial regions between miscible fluids. While much attention has focused on immiscible interfaces in the past, miscible interfaces have been explored to a much lesser degree, so that there are many open questions regarding their dynamics at this time. Among the more pressing issues is the role that nonconventional stresses can play in such interfacial regions. Such stresses are typically not accounted for in efforts to model the dynamics of miscible flows. Our research aims to clarify under which circumstances these stresses do have to be taken into account, and what quantitative approaches are most suitable in this regard. In order to address these issues, we have focused on conducting linear stability analyses and nonlinear simulations for capillary tube and Hele-Shaw flows, and to compare the results with corresponding experiments performed in the labs of our co-investigators Prof. Maxworthy at USC, and Dr. Balasubramaniam at NASA. Over the duration of the project we have, among other things, focused on the effects of variable diffusion coefficients in such flows, and specifically on their influence in the growth of instabilities. Furthermore, our three-dimensional spectral element simulations have made good progress, so that we have come to a point where we can conduct more detailed comparisons with experimental observations. We are currently focusing our efforts on reproducing the tip-splitting instability observed by Maxworthy. Finally, we have discovered a new core-annular flow instability in the Stokes flow regime during the last year. This represents a significant finding, as this instability does not have an immiscible counterpart.

Meiburg, Eckart↗

Numerical investigation of instability and transition in rotating plane Poiseuille flow

Direct numerical simulations with initial small-amplitude random disturbances are used to investigate instability and transition in plane Pouseuille flow with spanwise system rotation, employing a large computational domain to facilitate the selection of the dominant spanwise wavelength of the observed streamwise vortices as well as the streamwise wavelength of the dominant secondary modes due to streamwise vortices. In all cases studied, the unstable primary three-dimensional waves persist in the nonlinear stage. Where there is primary three-dimensional wave decay, the finite-amplitude streamwise vortices can become unstable to two different three-dimensional secondary instability modes, depending on the Reynolds and the rotation numbers.

Yang, Kyung-Soo↗

Sound generation and upstream influence due to instability waves interacting with non-uniform mean flows

Attention is given to the sound produced by artificially excited, spatially growing instability waves on subsonic shear layers. Real flows that always diverge in the downstream direction allow sound to be produced by the interaction of the instability waves with the resulting streamwise variations of the flow. The upstream influence, or feedback, can interact with the splitter plate lip to produce a downstream-propagating instability wave that may under certain conditions be the same instability wave that originally generated the upstream influence. The present treatment is restricted to very low Mach number flows, so that compressibility effects can only become important over large distances.

Goldstein, M. E.↗

Linear Wave Motion from Concentrated Harmonic Sources in Blasius Flow

The motion of individual linear instability waves in shear flows is well described by existing theoretical and numerical methods. However, naturally occuring sources produce coherent wave motions with broadband spanwise wavenumber and frequency spectra, and the different spectral components interact both linearly and nonlinearily. This paper describes a series of calculations for the parameters of three different experiments using locally parallel linear stability theory (LST), the Parabolized Stability Equations (PSE), and Direct Numerical Simulation (DNS). The calculations illustrate the strengths and weaknesses of the different methods, the extent to which the methods agree or disagree, and, finally the extent to which agreement with the measurements can be attained, given that the experiments also have their own difficulties.

linear↗

On the 'flip-flop' instability of Bondi-Hoyle accretion flows

A simple physical interpretation is advanced by means of an analysis of the shock cone in the accretion flows past a compact object and with an examination of the accretion-line stability analyses. The stability of the conical shock is examined against small angular deflections with attention given to several simplifying assumptions. A line instability is identified in the Bondi-Hoyle accretion flows that leads to the formation of a large opening-angle shock. When the opening angle becomes large the instability becomes irregular oscillation. The analytical methodology is compared to previous numerical configurations that demonstrate different shock morphologies. The Bondi-Hoyle accretion onto a compact object is concluded to generate a range of nonlinear instabilities in both homogeneous and inhomogeneous cases with a quasiperiodic oscillation in the linear regime.

Livio, Mario↗