Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “finite precision”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

Vibration transmission through rolling element bearings in geared rotor systems

A new mathematical model is proposed to examine the vibration transmission through rolling element bearings in geared rotor systems. Current bearing models, based on either ideal boundary conditions for the shaft or purely translational stiffness element description, cannot explain how the vibratory motion may be transmitted from the rotating shaft to the casing. Experimental results have shown that the casing plate motion is primarily flexural. Here, this issue is clarified qualitatively and quantitatively by developing a comprehensive bearing stiffness matrix of dimension 6 to model precision rolling element bearings using basic principles. The proposed bearing stiffness matrix is partially verified using available analytical and experimental data, and is completely characterized. The study extends the proposed bearing formulation to analyze the overall geared rotor system dynamics including casing and mounts. The bearing stiffness matrix is included in discrete system models using lumped parameter and/or dynamic finite element techniques.

Singh, Rajendra↗
DOE OSTI2022

Low-Frequency Correlated Charge-Noise Measurements Across Multiple Energy Transitions in a Tantalum Transmon

Transmon qubits fabricated with tantalum metal have been shown to possess energy relaxation times greater than 400 𝜇⁢s and, as such, present an attractive platform for high precision, correlated noise studies across multiple higher-energy transitions. Tracking the multilevel fluctuating qudit frequencies with a precision enabled by the high coherence of the device allows us to extract the charge offset and quasiparticle dynamics. We observe qualitatively different charge-offset behavior in the tantalum device than those measured in previous low-frequency charge-noise studies. In particular, we find the charge-offset dynamics are dominated by rare, discrete jumps between a finite number of quasistationary charge configurations, a previously unobserved charge-noise process in superconducting qubits.

3-dimensional systems↗
NASA NTRS1985

Unification of color postprocessing techniques for 3-dimensional computational mechanics

To facilitate the understanding of complex three-dimensional numerical models, advanced interactive color postprocessing techniques are introduced. These techniques are sufficiently flexible so that postprocessing difficulties arising from model size, geometric complexity, response variation, and analysis type can be adequately overcome. Finite element, finite difference, and boundary element models may be evaluated with the prototype postprocessor. Elements may be removed from parent models to be studied as independent subobjects. Discontinuous responses may be contoured including responses which become singular, and nonlinear color scales may be input by the user for the enhancement of the contouring operation. Hit testing can be performed to extract precise geometric, response, mesh, or material information from the database. In addition, stress intensity factors may be contoured along the crack front of a fracture model. Stepwise analyses can be studied, and the user can recontour responses repeatedly, as if he were paging through the response sets. As a system, these tools allow effective interpretation of complex analysis results.

Bailey, Bruce Charles↗
NASA NTRS2015

Growth of InSb and InI Crystals on Earth and in Microgravity

During the past 40 years, dozens of semiconductor crystal growth experiments have been conducted in space laboratories. The subsequent analysis of the space-grown crystals revealed (i) that weak convection existed in virtually all melt-growth experiments, (ii) de-wetting significantly reduced the level of stress-induced defects, and (iii) particularly encouraging results were obtained in vapor-growth experiments. In 2002, following a decade of ground based research in growing doped Ge and GaSb crystals, a series of crystal growth experiments was performed at the ISS, within the SUBSA (Solidification Using a Baffle in Sealed Ampoules) investigation. Te- and Zn-doped InSb crystals were grown from the melt. The specially designed furnace provided a side-view of the melt and precise seeding measurement of the growth rate. At present, under sponsorship of CASIS (Center for the Advancement of Science in Space, www.iss-casis.org), we are conducting ground-based experiments with indium mono-iodide (InI) in preparation for the "SUBSA II" ISS investigation, planned for 2017. The experiments include: i) Horizontal Bridgman (HB) growth and ii) Vapor Transport (VT) growth. Finite element modeling will also be conducted, to optimize the design of the flight ampoules, for vapor and melt growth.

Ostrogorsky, A. G.↗
DOE OSTI2026

Long-Range Dispersion Governs the Behavior of Near-Critical Fluids: Universal Scaling and Implications for Accurate Molecular Simulation

Computer simulations of near-critical and supercritical fluids often deviate from experimental results, a discrepancy commonly attributed to force-field resolutions and inaccuracies. We demonstrate that these errors primarily stem from using finite cutoff schemes for dispersion interactions, which become effectively long-range as the correlation length grows near the critical point. By employing the smooth particle-mesh Ewald method to account for full long-range dispersion, we show that coarse-grained models can also achieve high quantitative accuracy for n-undecane and propylbenzene. This approach enables the precise determination of density fluctuations and correlation lengths, which exhibit universal critical scaling and depend on the molecular size and shape. Our findings resolve a longstanding debate in molecular simulations of near-critical fluids, establishing that capturing long-wavelength fluctuations is essential for bridging the gap between the microscopic behavior and macroscopic critical phenomena.

Chen, Guang↗
NASA NTRS1981

Accuracy and convergence of a finite element algorithm for turbulent boundary layer flow

The Galerkin-Weighted Residuals formulation is employed to derive an implicit finite element solution algorithm for the nonlinear parabolic partial differential equation system governing turbulent boundary layer flow. Solution accuracy and convergence with discretization refinement are quantized in several error norms using linear and quadratic basis functions. Richardson extrapolation is used to isolate integration truncation error in all norms, and Newton iteration is employed for all equation solutions performed in double-precision. The mathematical theory supporting accuracy and convergence concepts for linear elliptic equations appears extensible to the nonlinear equations characteristic of turbulent boundary layer flow.

Soliman, M. O.↗
NASA NTRS1985

Development of a flight test maneuver autopilot for an F-15 aircraft

An autopilot can be used to provide precise control to meet the demanding requirements of flight research maneuvers with high-performance aircraft. This paper presents the development of control laws for a flight test maneuver autopilot for an F-15 aircraft. A linear quadratic regulator approach is used to develop the control laws within the context of flight test maneuver requirements by treating the maneuver as a finite time tracking problem with regulation of state rates. Results are presented to show the effectiveness of the controller in insuring acceptable aircraft performance during a maneuver.

Alag, G. S.↗
DOE OSTI2023

Implementation of AI/DEEP learning disruption predictor into a plasma control system

Abstract This paper reports on advances in the state‐of‐the‐art deep learning disruption prediction models based on the Fusion Recurrent Neural Network (FRNN) originally introduced in a 2019 NATURE publication [ https://doi.org/10.1038/s41586‐019‐1116‐4 ]. In particular, the predictor now features not only the “disruption score,” as an indicator of the probability of an imminent disruption, but also a “sensitivity score” in real time to indicate the underlying reasons for the imminent disruption. This adds valuable physics interpretability for the deep learning model and can provide helpful guidance for control actuators now implemented into a modern plasma control system (PCS). The advance is a significant step forward in moving from modern deep learning disruption prediction to real‐time control and brings novel AI‐enabled capabilities relevant for application to the future burning plasma ITER system. Our analyses use large amounts of data from JET and DIII‐D vetted in the earlier NATURE publication. In addition to “when” a shot is predicted to disrupt, this paper addresses reasons “why” by carrying out sensitivity studies. FRNN is accordingly extended to use more channels of information, including measured DIII‐D signals such as (i) the “n1rms” signal that is correlated with the n = 1 modes with finite frequency, including neoclassical tearing mode and sawtooth dynamics; (ii) the bolometer data indicative of plasma impurity control; and (iii) “q‐min”—the minimum value of the safety factor relevant to the key physics of kink modes. The additional channels and interpretability features expand the ability of the deep learning FRNN software to provide information about disruption subcategories as well as more precise and direct guidance for the actuators in a PCS.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Pattern-enhanced Resonant Soft X-ray Scattering for Operando monitoring of electrochemical solid-liquid interfaces

Unveiling interfaces at sub-nanometer scales is essential for advancing the understanding of complex chemical transformations. However, characterizing solid-liquid interfaces with high dimensional sensitivity and temporal resolution remains challenging, due to their dynamic nature and inaccessibility by conventional probes. Here we present an approach, Pattern-enhanced Resonant Soft X-ray Scattering, to overcome the challenges. Rooted in a “sample-as-optics” philosophy, this technique utilizes precisely engineered line-grating nanopatterns to modulate near-field X-ray illumination, coherently enhancing scattering signals from the line-gratings. We implement the method using Ni line-grating nanopatterns in electrochemical water oxidation. The periodic nanostructures serve as diffractive optical elements to reveal the Ni oxidation gradients and structural dynamics at the electrode-electrolyte interfaces. Finite-element simulations corroborate the observed trends by modeling variations in compositions and structures during electrocatalysis. Through integrating advanced sample design with coherent wave nature of soft X-rays, our approach opens accessible pathways to operando exploring chemical evolution and sub-nanometer dimensional variations simultaneously in electrochemical systems. This non-destructive method is efficient and element-specific, making it valuable for probing chemical and dimensional dynamics with appropriate modeling.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS2016

Multilayer Active Shell Mirrors for Space Telescopes

A novel active mirror technology based on carbon fiber reinforced polymer (CFRP) substrates and replication techniques has been developed. Multiple additional layers are implemented into the design serving various functions. Nanolaminate metal films are used to provide a high quality reflective front surface. A backing layer of thin active material is implemented to provide the surface-parallel actuation scheme. Printed electronics are used to create a custom electrode pattern and flexible routing layer. Mirrors of this design are thin (< 1.0 mm), lightweight (2.7 kg/m2 ), and have large actuation capabilities. These capabilities, along with the associated manufacturing processes, represent a significant change in design compared to traditional optics. Such mirrors could be used as lightweight primaries for small CubeSat-based telescopes or as meter-class segments for future large aperture observatories. Multiple mirrors can be produced under identical conditions enabling a substantial reduction in manufacturing cost and complexity. An overview of the mirror design and manufacturing processes is presented. Predictions on the actuation performance have been made through finite element simulations demonstrating correct abilities on the order of 250−300× for astigmatic modes with only 41 independent actuators. A description of the custom metrology system used to characterize the active mirrors is also presented. The system is based on a Reverse Hartmann test and can accommodate extremely large deviations in mirror figure (> 100 µm PV) down to sub-micron precision. The system has been validated against several traditional techniques including photogrammetry and interferometry. The mirror performance has been characterized using this system, as well as closed-loop figure correction experiments on 150 mm dia. prototypes. The mirrors have demonstrated post-correction figure accuracies of 200 nm RMS (two dead actuators limiting performance).

Reverse Hartmann↗
DOE OSTI2026

DESI DR2 Baryon Acoustic Oscillations from the Lyman Alpha Forest Multipoles

We present an alternative measurement of the Baryon Acoustic Oscillation (BAO) using the Legendre multipole representation of the Ly$α$ forest correlation functions from the second data release (DR2) of the Dark Energy Spectroscopic Instrument survey. Compressing the auto- and cross-correlation functions into Legendre multipoles yields a positive-definite covariance matrix without any smoothing -- unlike the baseline DR2 analysis -- thanks to a significantly reduced data vector size. We introduce the statistical corrections required to debias the finite-sample covariance matrix estimate and demonstrate that monopole and quadrupole terms for both auto- and cross-correlations can be used even when the correlation functions are distorted by continuum errors and contaminated by metals. This formalism has slightly diminished the constraining power of the BAO scale, while considerably weakening constraints on nuisance parameters. We measure the isotropic BAO scale with $0.93\%$ precision at $z_\mathrm{eff}=2.35$, the Hubble parameter $H(z_\mathrm{eff})=(239.5\pm3.4)~(147.09~\mathrm{Mpc}/r_d) ~\mathrm{km~s}^{-1}~\text{Mpc}^{-1}$, and the transverse comoving distance $D_M(z_\mathrm{eff})=(5.80 \pm 0.10)~(r_d/147.09~\mathrm{Mpc})$~Gpc for a given value of the sound horizon ($r_d$). Our BAO results are entirely consistent with the baseline DR2 analysis.

Karaçaylı, Naim Göksel [Chicago U., KICP; Ohio Sta↗
DOE OSTI2022

Microstructure-Sensitive modeling of surface roughness and notch effects on extreme value fatigue response

Fatigue life knockdown due to surface roughness induces local stress concentrations. Physical fatigue experiments are crucial to qualify materials for use but are limited in their capability to examine the mechanisms underlying the fatigue crack formation driving force due to these stress concentrations. Microstructure-sensitive computational models can aid in this regard and are employed in this work to examine the effects of surface roughness in Al 7075-T6. Digital microstructure models are subjected to crystal plasticity finite element method (CPFEM) simulations to examine the combined effects of microstructure and grain scale asperities on the driving force for fatigue crack formation. Following elastic–plastic shakedown, mesoscale volume-averaged fatigue indicator parameters (FIPs) are computed within fatigue damage process zones of grains. An increase in the intensity of realistic surface roughness profiles corresponds accordingly to larger FIPs but it is difficult to precisely interpret the mechanisms and effects of this intensification. We thus parametrically investigate surface asperities that couple with microstructure and lack of constraint on slip at the free surface to describe microstructure-sensitive surface roughness knockdown effects on fatigue resistance. The depth of a single valley (i.e., notch) due to surface roughness is found to be more detrimental to fatigue resistance than the radius (i.e., notch width, not to be confused with notch acuity). Finally, we also find that different crystallographic textures, grain morphologies, and number of sampled grains have a limited effect on the depth of influence of these notches.

36 MATERIALS SCIENCE↗
NASA NTRS1988

Modifying PASVART to solve singular nonlinear 2-point boundary problems

To study the buckling and post-buckling behavior of shells and various other structures, one must solve a nonlinear 2-point boundary problem. Since closed-form analytic solutions for such problems are virtually nonexistent, numerical approximations are inevitable. This makes the availability of accurate and reliable software indispensable. In a series of papers Lentini and Pereyra, expanding on the work of Keller, developed PASVART: an adaptive finite difference solver for nonlinear 2-point boundary problems. While the program does produce extremely accurate solutions with great efficiency, it is hindered by a major limitation. PASVART will only locate isolated solutions of the problem. In buckling problems, the solution set is not unique. It will contain singular or bifurcation points, where different branches of the solution set may intersect. Thus, PASVART is useless precisely when the problem becomes interesting. To resolve this deficiency we propose a modification of PASVART that will enable the user to perform a more complete bifurcation analysis. PASVART would be combined with the Thurston bifurcation solution: as adaptation of Newton's method that was motivated by the work of Koiter 3 are reinterpreted in terms of an iterative computational method by Thurston.

Fulton, James P.↗
NASA NTRS1979

On the equivalence between semiempirical fracture analyses and R-curves

The relationships between several semiempirical fracture analyses (Brockrath and Glassco, 1974; Newman, 1973; Kuhn, 1968; Orange, 1971; Feddersen, 1971) and the R-curve concept of fracture mechanics are examined. Some characteristics of the R-curve concept when applied to finite-width specimens are reviewed, and conditions for equivalence between a semiempirical analysis (SEFA) and an R-curve are derived. The relationship between R-curves and SEFAs is studied for a hypothetical material. It is shown that for each SEFA there is an equivalent R-curve, the magnitude and shape of which are determined by the SEFA formulation and parameters, and which predicts precisely the same relationship between fracture stress and original crack length. A given SEFA correlates residual strength data closely if its equivalent R-curve closely matches the actual R-curve of the material studied. The SEFA given by Newman is found to yield best results for the hypothetical case considered. Equivalent R-curves for real materials are developed using data from the literature.

Orange, T. W.↗
NASA NTRS1998

GPS Monitoring of Surface Change During and Following the Fortuitous Occurrence of the M(sub w) = 7.3 Landers Earthquake in our Network

Accomplishments: (1) Continues GPS monitoring of surface change during and following the fortuitous occurrence of the M(sub w) = 7.3 Landers earthquake in our network, in order to characterize earthquake dynamics and accelerated activity of related faults as far as 100's of kilometers along strike. (2) Integrates the geodetic constraints into consistent kinematic descriptions of the deformation field that can in turn be used to characterize the processes that drive geodynamics, including seismic cycle dynamics. In 1991, we installed and occupied a high precision GPS geodetic network to measure transform-related deformation that is partitioned from the Pacific - North America plate boundary northeastward through the Mojave Desert, via the Eastern California shear zone to the Walker Lane. The onset of the M(sub w) = 7.3 June 28, 1992, Landers, California, earthquake sequence within this network poses unique opportunities for continued monitoring of regional surface deformation related to the culmination of a major seismic cycle, characterization of the dynamic behavior of continental lithosphere during the seismic sequence, and post-seismic transient deformation. During the last year, we have reprocessed all three previous epochs for which JPL fiducial free point positioning products available and are queued for the remaining needed products, completed two field campaigns monitoring approx. 20 sites (October 1995 and September 1996), begun modeling by development of a finite element mesh based on network station locations, and developed manuscripts dealing with both the Landers-related transient deformation at the latitude of Lone Pine and the velocity field of the whole experiment. We are currently deploying a 1997 observation campaign (June 1997). We use GPS geodetic studies to characterize deformation in the Mojave Desert region and related structural domains to the north, and geophysical modeling of lithospheric behavior. The modeling is constrained by our existing and continued GPS measurements, which will provide much needed data on far-field strain accumulation across the region and on the deformational response of continental lithosphere during and following a large earthquake, forming the basis for kinematic and dynamic modeling of secular and seismic-cycle deformation. GPS geodesy affords both regional coverage and high precision that uniquely bear on these problems.

Miller, M. Meghan↗
DOE OSTI2024

Optimality and Noise Resilience of Critical Quantum Sensing

We compare critical quantum sensing to passive quantum strategies to perform frequency estimation, in the case of single-mode quadratic Hamiltonians. We show that, while in the unitary case both strategies achieve precision scaling quadratic with the number of photons, in the presence of dissipation this is true only for critical strategies. We also establish that working at the exceptional point or beyond threshold provides suboptimal performance. This critical enhancement is due to the emergence of a transient regime in the open critical dynamics, and is invariant to temperature changes. When considering both time and system size as resources, for both strategies the precision scales linearly with the product of the total time and the number of photons, in accordance with fundamental bounds. However, we show that critical protocols outperform optimal passive strategies if preparation and measurement times are not negligible. Our results are applicable to a broad variety of critical sensors whose phenomenology can be reduced to that of a single-mode quadratic Hamiltonian, including systems described by finite-component and fully connected models.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
NASA NTRS1990

NASA-UCLA Workshop on Computational Techniques in Identification and Control of Flexible Flight Structures, Lake Arrowhead, CA, Nov. 2-4, 1989, Proceedings

The present conference on the identification and control of flexible flight structures with computational techniques encompasses existing and planned testbeds, modeling techniques, adaptive control, and numerical computation and simulation. Specific issues addressed include the NASA/MFSC ground test facility, an active control test on the NASA Minimast, the Astrex testbed for large precision space structures, the dynamic analysis of truss-beam modeling, combined structure-controls-integrated optimization, distributed parameter modeling applicable to the control of flexible flight structures, and approaches to nonclassically damped dynamic systems. Also addressed are adaptive control concepts, techniques for vibration and decentralized slew maneuver control, the discretization of second-order-in-time differential equations which are applicable to nonlinear wave problems, the finite-dimensional approximations of Riccati equations, and numerical simulations of actively controlled space structures.

Balakrishnan, A. V.↗
DOE OSTI2025

Water Dielectric Function at Finite Wavelength and the Convergence of Its Large Wavelength Limit (Static Dielectric) by Fluctuation Formulas

Here we provide a general analysis of the longitudinal dielectric function ε l (k) via fluctuation formulas at finite wavelength k, including the static dielectric constant ε w = ε l (k → 0), and analyze the different sources of errors, deriving explicit formulas. Simulations with the SPC/E water model show that the convergence of fluctuation formulas to compute the static dielectric constant is slow and requires long simulations. The analysis of ε l (k) allows us to identify the long- and short-wavelength limits and provide a precise determination of the location of the poles as well as the zeros in the complex plane, which determine the short-distance form of the electrostatic (Coulomb) interaction among charged particles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗