Results for “exponential integrators” — Page 18

DOE OSTI2024

Formation of the oxyl’s potential energy surface by the spectral kinetics of a vibrational mode

One of the most reactive intermediates for oxidative reactions is the oxyl radical, an electron-deficient oxygen atom. The discovery of a new vibration upon photoexcitation of the oxygen evolution catalysis detected the oxyl radical at the SrTiO3 surface. The vibration was assigned to a motion of the sub-surface oxygen underneath the titanium oxyl (Ti–O●−) created upon hole transfer to (or electron extraction from) a hydroxylated surface site. Evidence for such an interfacial mode is derived from its spectral shape, which exhibited a Fano resonance—a coupling of a sharp normal mode to continuum excitations. Here, this Fano resonance is utilized to derive precise formation kinetics of the oxyl radical and its associated potential energy surface (PES). From the Fano lineshape, the formation kinetics are obtained from the anti-resonance (the kinetics of the coupling factor), the resonance (the kinetics of the coupled continuum excitations), and the frequency integrated spectrum (the kinetics of the normal mode’s cross-section). All three perspectives yield logistic function growth with a half-rise of 2.3 ± 0.3 ps and a time constant of 0.48 ± 0.09 ps. A non-equilibrium transient associated with photoexcitation is separated from the rise of the equilibrated PES. The logistic function characterizes the oxyl coverage at the very initial stages (t ∼ 0) to have an exponential growth rate that quickly decreases toward zero as a limiting coverage is reached. Such time-dependent reaction kinetics identify a dynamic activation barrier associated with the formation of a PES and quantify it for oxyl radical coverage.

Chemistry↗

DOE OSTI2022

SCALED-PRODUCTION OF RARE EARTH OXIDES AND CRITICAL MATERIALS FROM COAL-BASED SOURCES

A projected exponential increase in the production of electric vehicles and high-end advanced technologies including those used in the defense industrial is expected to require nearly double the amount of rare earth elements (REEs) and critical elements currently available worldwide. As such, recovery from secondary sources such as coal and coal byproducts may be needed to meet the increased demand. A project has been initiated to evaluate methods and technologies integrated in an existing rare earth pilot plant that have the potential to improve the economics of extracting rare earths and critical materials from coal-based materials. This presentation will provide details about the technologies and results from pilot plant testing.

Honaker, Rick Q↗

DOE OSTI2022

Subleading Weingartens

Haar integrals over the unitary group contain subleading terms that are needed for unitarity. We study analogous effects in the time evolution operators of JT gravity and Brownian SYK. In JT gravity with bulk matter we find an explanation for the first sub-leading terms, and in Brownian SYK we find configurations that can explain the full series. An important role is played by slightly off-shell modes that are exponentially amplified by chaos.

2D Gravity↗

DOE OSTI2025

Bottom-Up Simulation, Reconstruction, and Quantification of Macromolecule Sequences from Experimental Polymerizations

Motivated by the canonical sequence–structure–function paradigm, tools to characterize chemical patterning in natural biomacromolecules, from proteins to nucleic acids, have grown exponentially in recent years. However, analogous strategies for synthetic macromolecules remain in nascent stages, complicated by sequence polydispersity and analytical limitations. To address this, we have developed a comprehensive and open-source Python package, PRISM (polymer rate insights and sequence modeling), an end-to-end workflow that provides a path from experimental kinetics measurements to quantitative and qualitative metrics for describing chemical patterning in stochastic polymers. First, a numerical integration strategy was constructed to simulate and fit experimental data from reversible addition–fragmentation chain transfer (RAFT) polymerization kinetics, enabling the facile estimation of relevant reactivity ratios. These ratios were then used in a mechanism-specific stochastic kinetic simulation strategy to simulate sequence ensembles corresponding to model systems spanning experimental copolymers, classes of statistical polymers (e.g., alternating, block, and gradient), and multiblock copolymers. Lastly, inspired by sequence homology metrics from bioinformatics, we introduce visualization strategies and quantitative metrics to facilitate comparisons of different sequence ensembles. As the sequence–structure–function paradigm becomes increasingly central in de novo design of synthetic macromolecules, this toolkit provides a first step toward accurate and representative sequence description and featurization.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2023

On the Cauchy problem for Boltzmann equation modeling a polyatomic gas

In the present article, we consider the Boltzmann equation that models a polyatomic gas by introducing one additional continuous variable, referred to as microscopic internal energy. We establish existence and uniqueness theory in the space homogeneous setting for the full non-linear case, under an extended Grad-type assumption on transition probability rates, which comprises hard potentials for both the relative speed and internal energy with the rate in the interval 0,2, multiplied by an integrable angular part and integrable partition functions. The Cauchy problem is resolved by means of an abstract ordinary differential equation (ODE) theory in Banach spaces for the initial data with finite and strictly positive gas mass and energy, finite momentum, and additionally finite K* polynomial moment, with K* depending on the rate of the transition probability and the structure of a polyatomic molecule or its internal degrees of freedom. Moreover, we prove that polynomially and exponentially weighted Banach space norms associated with the solution are both generated and propagated uniformly in time.

Physics↗

DOE OSTI2022

Combined Cycle Integrated Thermal Energy Storage “CiTES” (Final Scientific/Technical Report)

The Phase I of this project confirmed the technical feasibility of a Combined Cycle integrated Thermal Energy Storage “CiTES” system, calculated the key performance parameters like power efficiency and costs, and proved its commercial value with full-year simulations for several US electricity markets with high degree of variable renewable generation and volatile hourly electricity prices. The core element of this project is the Electro Thermal Energy Storage (ETES) technology from Siemens Gamesa Renewable Energy GmbH, using thermally stable and inexpensive volcanic rocks as storage material and air as heat transfer medium. This technology is backed by more than 10 years of experience and a 440MMBTU (130MWh-th) pilot plant in Hamburg, Germany, which is in operation since 2019. The integration of this thermal storage in an existing combined cycle power plant (CCPP) is typical power plant technology without any major technology risks. It allows the storage of inexpensive renewable energy during times of surplus renewable generation and the discharge of this energy in times of high energy demand when the fossil plant is in operation. This supplements the fossil power generation with CO2-emission-free energy. The secondary effect of the CiTES system is that a small part of the stored thermal energy is used to keep the heat recovery steam generator (HRSG) and steam turbine (ST) of the combined cycle power plant in hot and ready-to-start condition. This enables the plant to start rapidly when fossil generation is required to satisfy demand as soon variable generation drops off in the evenings or during cloud cover and calm wind periods. Without pre-warming of the HRSG and ST, the CCPP would need several hours for a cold or warm start, burn a lot of gas and release high NOx emissions during start and wouldn’t be able to use the short times of high energy prices in an efficient or economical manner. The economic parameters of CiTES were determined by a full year “8760” simulation using a data set calculation for each of the hours of the year, and historical electricity and gas prices. For consistency, the simulations were focused on the pre-COVID year 2019. The financially most attractive markets were in the Energy Reliability Council of Texas (ERCOT) region, which allowed substantial value generation with arbitrage (charge with cheap energy during renewable surplus times and discharge when energy is needed and expensive). The improvement of flexibility with the CiTES system by pre-heating and warm-keeping of the CCPP allowed for additional power generation during short time periods when demand is high but renewable generation is down; when the hourly energy prices are highest in these markets. The simulations are based on 2019 data, when ERCOT had 27GW of installed photovoltaic (PV) and wind generation. They showed that the created revenue with the prototypically sized CiTES system of 1,000MMBTU (300MWh-th) falls a little bit short of what is expected from a commercially viable investment. The system has optimization opportunities for cost reduction and increased effectiveness which will be realized during a potential Phase II Pre-FEED study following this project. Furthermore, it is safe to assume that a lot of renewable generation capacity will be added all over the US in the coming years. As an example, ERCOT is predicting to more than double its renewable generation from 27GW in 2019 to a forecasted 63GW in 2023. This will increase the amount of renewable overproduction exponentially. This rapid increase of local overproduction and the need to curtail renewable generation is well documented by the California ISO (www.CAISO.com / managing oversupply). However, the simulations also revealed a weakness in the structure of the electricity markets in the US. More specifically, when electricity prices are very low and approaching negative levels, the owners of Variable Renewable Energy (VRE) will curtail a part of their facility to stabilize the price by reducing supply. This results in a situation in which storage facilities, which are integrated in existing fossil assets and don’t have the behind-the-meter benefit of a VRE, won’t be able to purchase low cost – otherwise curtailed – renewable energy off the grid. A special tariff, which motivates VRE owners to sell otherwise curtailed renewable energy to storage facilities (Hydrogen, thermal, pumped hydro, etc.) can solve this issue. The implementation of such a regulating tariff by Independent System Operators, thus avoiding renewable curtailment, is a pre condition for successful commercialization for renewable energy storage technologies. With this advancement of design and technology and improvements in the market environment, it can be expected that the Combined Cycle integrated Thermal Energy Storage proves itself as an important innovation to keep highly efficient, natural gas-based power generation economically successful and relevant for the power industry in the United States of America.

Wolf, Thorsten↗

DOE OSTI2022

A scale-wise analysis of intermittent momentum transport in dense canopy flows

We investigate the intermittent dynamics of momentum transport and its underlying time scales in the near-wall region of the neutrally stratified atmospheric boundary layer in the presence of a vegetation canopy. This is achieved through an empirical analysis of the persistence time scales (periods between successive zero-crossings) of momentum flux events, and their connection to the ejection–sweep cycle. Using high-frequency measurements from the GoAmazon campaign, spanning multiple heights within and above a dense canopy, the analysis suggests that, when the persistence time scales ( $t_p$ ) of momentum flux events from four different quadrants are separately normalized by $\varGamma _{w}$ (integral time scale of the vertical velocity), their distributions $P(t_p/\varGamma _{w})$ remain height-invariant. This result points to a persistent memory imposed by canopy-induced coherent structures, and to their role as an efficient momentum-transporting mechanism between the canopy airspace and the region immediately above. Moreover, $P(t_p/\varGamma _{w})$ exhibits a power-law scaling at times $t_{p}<\varGamma _{w}$ , with an exponential tail appearing for $t_{p} \geq \varGamma _{w}$ . By separating the flux events based on $t_p$ , we discover that around 80 % of the momentum is transported through the long-lived events ( $t_{p} \geq \varGamma _{w}$ ) at heights immediately above the canopy, while the short-lived ones ( $t_{p} < \varGamma _{w}$ ) only contribute marginally ( $\approx 20\,\%$ ). To explain the role of instantaneous flux amplitudes in momentum transport, we compare the measurements with newly developed surrogate data and establish that the range of time scales involved with amplitude variations in the fluxes tends to increase as one transitions from within to above the canopy.

Mechanics↗

DOE OSTI2026

ENSO Recharge Oscillator Theory Integrating the Southward Wind Shift

The El Niño–Southern Oscillation (ENSO) is one of the most‐well understood climate phenomena, and the Recharge Oscillator (RO) theory is widely used to conceptualize its physics in observations and models. ENSO‐associated equatorial zonal wind anomalies shift southward in boreal winter, contributing to ENSO termination. Thus far, this effect has not been explicitly described in the RO framework. Here we derive a new form of the RO under the low‐frequency limit that incorporates the seasonal migration of zonal wind anomalies. In our theory, the Bjerknes feedback depends on the central latitude of zonal wind anomalies, decaying exponentially as winds shift away from the equator. Meanwhile, wind anomalies centered off the equator induce equatorial wave adjustment and thereby have a delayed effect on sea surface temperature anomalies. A stochastic RO simulation with a prescribed wind shift reproduces about half the amplitude of ENSO seasonal synchronization as well as ENSO combination tones.

54 ENVIRONMENTAL SCIENCES↗

DOE OSTI2023

Global analysis of the yeast knockout phenome

Genome-wide phenotypic screens in the budding yeast Saccharomyces cerevisiae, enabled by its knockout collection, have produced the largest, richest, and most systematic phenotypic description of any organism. However, integrative analyses of this rich data source have been virtually impossible because of the lack of a central data repository and consistent metadata annotations. Here, we describe the aggregation, harmonization, and analysis of ~14,500 yeast knockout screens, which we call Yeast Phenome. Using this unique dataset, we characterized two unknown genes (YHR045W and YGL117W) and showed that tryptophan starvation is a by-product of many chemical treatments. Furthermore, we uncovered an exponential relationship between phenotypic similarity and intergenic distance, which suggests that gene positions in both yeast and human genomes are optimized for function.

59 BASIC BIOLOGICAL SCIENCES↗

NASA NTRS1971

Comparison of a discrete steepest ascent method with the continuous steepest ascent method for optimal programing

A discrete steepest ascent method which allows controls which are not piecewise constant (for example, it allows all continuous piecewise linear controls) was derived for the solution of optimal programming problems. This method is based on the continuous steepest ascent method of Bryson and Denham and new concepts introduced by Kelley and Denham in their development of compatible adjoints for taking into account the effects of numerical integration. The method is a generalization of the algorithm suggested by Canon, Cullum, and Polak with the details of the gradient computation given. The discrete method was compared with the continuous method for an aerodynamics problem for which an analytic solution is given by Pontryagin's maximum principle, and numerical results are presented. The discrete method converges more rapidly than the continuous method at first, but then for some undetermined reason, loses its exponential convergence rate. A comparsion was also made for the algorithm of Canon, Cullum, and Polak using piecewise constant controls. This algorithm is very competitive with the continuous algorithm.

Childs, A. G.↗

NASA NTRS2004

Parameter Estimation in Atmospheric Data Sets

In this study the structure tensor technique is used to estimate dynamical parameters in atmospheric data sets. The structure tensor is a common tool for estimating motion in image sequences. This technique can be extended to estimate other dynamical parameters such as diffusion constants or exponential decay rates. A general mathematical framework was developed for the direct estimation of the physical parameters that govern the underlying processes from image sequences. This estimation technique can be adapted to the specific physical problem under investigation, so it can be used in a variety of applications in trace gas, aerosol, and cloud remote sensing. As a test scenario this technique will be applied to modeled dust data. In this case vertically integrated dust concentrations were used to derive wind information. Those results can be compared to the wind vector fields which served as input to the model. Based on this analysis, a method to compute atmospheric data parameter fields will be presented. .

Wenig, Mark↗

DOE OSTI2021

Patternable Mesoporous Thin Film Quantum Materials via Block Copolymer Self-Assembly: An Emergent Technology?

Recent developments in quantum materials hold promise for revolutionizing energy and information technologies. The use of soft matter self-assembly, for example, by employing block copolymers (BCPs) as structure directing or templating agents, offers facile pathways toward quantum metamaterials with highly tunable mesostructures via scalable solution processing. Here, we report the preparation of patternable mesoporous niobium carbonitride-type thin film superconductors through spin-coating of a hybrid solution containing an amphiphilic BCP swollen by niobia sol precursors and subsequent thermal processing in combination with photolithography. Spin-coated as-made BCP-niobia hybrid thin films on silicon substrates after optional photolithographic definition are heated in air to produce a porous oxide, and subsequently converted in a multistep process to carbonitrides via treatment with high temperatures in reactive gases including ammonia. Grazing incidence small-angle X-ray scattering suggests the presence of ordered mesostructures in as-made BCP-niobia films without further annealing, consistent with a distorted alternating gyroid morphology that is retained upon thermal treatments. Wide-angle X-ray scattering confirms the synthesis of phase-pure niobium carbonitride nanocrystals with rock-salt lattices within the mesoscale networks. Electrical transport measurements of unpatterned thin films show initial exponential rise in resistivity characteristic of thermal activation in granular systems down to 12.8 K, at which point resistivity drops to zero into a superconducting state. Magnetoresistance measurements determine the superconducting upper critical field to be over 16 T, demonstrating material quality on par with niobium carbonitrides obtained from traditional solid-state synthesis methods. Here. we discuss how such cost-effective and scalable solution-based quantum materials fabrication approaches may be integrated into existing microelectronics processing, promising the emergence of a technology with tremendous academic and industrial potential by combining the capabilities of soft matter self-assembly with quantum materials.

36 MATERIALS SCIENCE↗

NASA NTRS1999

Advanced Interactive Display formats for Terminal Area Traffic Control

This report describes the basic design considerations for perspective Air Traffic Control displays. A software framework has been developed for manual viewing parameter setting (MVPS) in preparation for continued, ongoing developments on automated viewing parameter setting (AVPS) schemes. Two distinct modes of MVPS operations are considered, both of which utilize manipulation pointers imbedded in the three-dimensional scene: (1) direct manipulation of the viewing parameters; in this mode the manipulation pointers act like the control-input device, through which the viewing parameter changes are made. Part of the parameters are rate controlled, and part of them position controlled. This mode is intended for making fast, iterative small changes in the parameters. (2) indirect manipulation of the viewing parameters. This mode is intended primarily for introducing large, predetermined changes in the parameters. Requests for changes in viewing parameter setting are entered manually by the operator by moving viewing parameter manipulation pointers on the screen. The motion of these pointers, which are an integral part of the 3-D scene, is limited to the boundaries of screen. This arrangement has been chosen, in order to preserve the correspondence between the spatial lay-outs of the new and the old viewing parameter setting, a feature which contributes to preventing spatial disorientation of the operator. For all viewing operations, e.g. rotation, translation and ranging, the actual change is executed automatically by the system, through gradual transitions with an exponentially damped, sinusoidal velocity profile, in this work referred to as 'slewing' motions. The slewing functions, which eliminate discontinuities in the viewing parameter changes, are designed primarily for enhancing the operator's impression that he, or she, is dealing with an actually existing physical system, rather than an abstract computer-generated scene, The proposed, continued research efforts will deal with the development of automated viewing parameter setting schemes. These schemes employ an optimization strategy, aimed at identifying the best possible vantage point, from which the Air Traffic Control scene can be viewed for a given traffic situation. They determine whether a change in viewing parameter setting is required and determine the dynamic path along which the change to the new viewing parameter setting should take place.

Grunwald, Arthur J.↗

DOE OSTI2020

ROBIN (RuciO/BIgData Express/SENSE) A Next-Generation High-Performance Data Service Platform

Increasingly, scientific research discoverydepends on the analysis of extremely large amounts of data. Thisdata is gathered through very large scientific instruments, verylarge numbers of small devices, and mid-scale instruments.These devices generate exponentially increasing volumes of data.Such data is often obtained, analyzed, stored, visualized, andtransferred at and among sites world-wide by largecollaborations of science communities. Managing and movingextremely large volumes of data across today’s networks is aspecial multidimensional challenge. Also, existing datamanagement and movement services and tools often areinadequate to address all specific requirements. This paperdescribes the various components of this challenge and howthose issues can be addressed by ROBIN, a uniquecomprehensive set of integrated services designed specificallyfor managing and moving extremely large amounts of data overlong distances, e.g., thousands of miles around the globe. Thispaper also describes the results of initial experiments using thatset of integrated services.

Wu, Wenji↗

NASA NTRS1996

Advanced interactive display formats for terminal area traffic control

This report describes the basic design considerations for perspective air traffic control displays. A software framework has been developed for manual viewing parameter setting (MVPS) in preparation for continued, ongoing developments on automated viewing parameter setting (AVPS) schemes. Two distinct modes of MVPS operations are considered, both of which utilize manipulation pointers imbedded in the three-dimensional scene: (1) direct manipulation of the viewing parameters -- in this mode the manipulation pointers act like the control-input device, through which the viewing parameter changes are made. Part of the parameters are rate controlled, and part of them position controlled. This mode is intended for making fast, iterative small changes in the parameters. (2) Indirect manipulation of the viewing parameters -- this mode is intended primarily for introducing large, predetermined changes in the parameters. Requests for changes in viewing parameter setting are entered manually by the operator by moving viewing parameter manipulation pointers on the screen. The motion of these pointers, which are an integral part of the 3-D scene, is limited to the boundaries of the screen. This arrangement has been chosen in order to preserve the correspondence between the spatial lay-outs of the new and the old viewing parameter setting, a feature which contributes to preventing spatial disorientation of the operator. For all viewing operations, e.g. rotation, translation and ranging, the actual change is executed automatically by the system, through gradual transitions with an exponentially damped, sinusoidal velocity profile, in this work referred to as 'slewing' motions. The slewing functions, which eliminate discontinuities in the viewing parameter changes, are designed primarily for enhancing the operator's impression that he, or she, is dealing with an actually existing physical system, rather than an abstract computer-generated scene. The proposed, continued research efforts will deal with the development of automated viewing parameter setting schemes. These schemes employ an optimization strategy, aimed at identifying the best possible vantage point, from which the air traffic control scene can be viewed for a given traffic situation. They determine whether a change in viewing parameter setting is required and determine the dynamic path along which the change to the new viewing parameter setting should take place.

Grunwald, Arthur J.↗

NASA NTRSDate not supplied

CLINICAL DECISION SUPPORT: PATH TO FUNCTIONAL REQUIREMENTS

Long-duration, deep-space exploration missions present significant challenges to crew health and performance. These challenges include the individual and combined effects of microgravity, radiation exposure, isolation, limited resources (mass, volume, power, data and crew time), limited options for evacuation and those associated with delayed or constrained communications, all of which demand greater crew autonomy. Specifically, as the communication delays intensify the further we explore space, the unqualified need for Earth-independent medical operations focused on autonomous diagnosis, treatment and prevention will be key to mission continuation and success. To augment the requisite knowledge, skills and abilities (KSAs) of a time-constrained crew operating under stressful conditions, combatting fatigue, and facing a potential medical crisis, a robust clinical decision support system (CDSS) is a probable solution that would facilitate, guide and inform Earth-independent medical operations, while assisting crewmembers through various clinical presentations. The Exploration Medical Capability (ExMC) Element of the Human Research Program (HRP) is expanding the boundaries of space medical systems to advance the care of astronauts on future exploration missions beyond low Earth orbit. ExMC is actively identifying and testing next-generation medical care and crew health maintenance technologies. The Clinical Decision Support (CDS) project addresses gap Medical-701 within the Inflight Medical Conditions risk: “Enhance medical capabilities within an exploration medical system.” Though mass, volume, and power will face increasing constraints, the projected computational capabilities of spacecraft systems will increase exponentially as information technology continues to advance this decade and beyond. Hence, data, software and computational resources will play an essential and synergistic role in maintaining crew health, wellness and performance in deep space missions. The focus of the CDS project is to develop recommended requirements for an in-vehicle CDSS that acts as a ‘virtual assistant’ for delivering optimal health, performance and medical care during exploration missions. The CDSS is envisioned as an integrated, software-based tool deployed on a laptop computer or handheld device. The CDSS will assist the crew and ground support when interacting with knowledge/databases (e.g. records, pharmacy, schedule), instrumentation (e.g. imaging, physiological monitoring devices), and habitat (e.g. wellness system, task performance system) and vehicle systems (e.g. environmental system, communication system). In addition, the human interface will employ a context-based approach that accounts for the crew’s situation. Thus, extraneous and clinically/operationally non-relevant information are reduced to avoid an increase in cognitive load. The framework of an ideal spaceflight CDSS is to include core and advanced analytical features that incorporate work from collaborators yet maintain a flexible platform for integrating new technology in the future. In fiscal year 2021 (FY21), the CDS project identified requirements through two primary mechanisms: (i) the development of software implementation prototypes and (ii) the application of systems engineering processes. The CDS project developed and tested a series of increasingly complex system prototypes that were based on use cases derived from the CDSS concept of operations (ConOps). These software implementations yielded insights on CDSS functionality as well as lessons learned that provided the initial requirements for CDSS capability. By applying a systems engineering (SE) approach, medical scenarios provided in the ConOps and the use cases for software implementation underwent functional decomposition to identify CDSS functionality. Also, systems-based modeling language (SysML) tools such as activity diagrams were developed from the same ConOps and use cases to identify CDSS functionality. The lessons learned from software implementation defined both specific requirements and broad areas of requirements. Within these defined broad requirement areas, further analysis of the SE products identified specific capability that resulted in the final functional requirements. In summary, the software prototypes, functional decomposition of the ConOps and use cases, and SysML diagrams provided the basis for the CDSS requirements developed in FY21. In the upcoming year, these requirements will be refined for their final ExMC baseline review in latter FY22.

clinical decision support↗

NASA NTRSDate not supplied

Clinical Decision Support: Path to Functional Requirements

Long-duration, deep-space exploration missions present significant challenges to crew health and performance. These challenges include the individual and combined effects of microgravity, radiation exposure, isolation, limited resources (mass, volume, power, data and crew time), limited options for evacuation and those associated with delayed or constrained communications, all of which demand greater crew autonomy. Specifically, as the communication delays intensify the further we explore space, the unqualified need for Earth-independent medical operations focused on autonomous diagnosis, treatment and prevention will be key to mission continuation and success. To augment the requisite knowledge, skills and abilities (KSAs) of a time-constrained crew operating under stressful conditions, combatting fatigue, and facing a potential medical crisis, a robust clinical decision support system (CDSS) is a probable solution that would facilitate, guide and inform Earth-independent medical operations, while assisting crewmembers through various clinical presentations. The Exploration Medical Capability (ExMC) Element of the Human Research Program (HRP) is expanding the boundaries of space medical systems to advance the care of astronauts on future exploration missions beyond low Earth orbit. ExMC is actively identifying and testing next-generation medical care and crew health maintenance technologies. The Clinical Decision Support (CDS) project addresses gap Medical-701 within the Inflight Medical Conditions risk: “Enhance medical capabilities within an exploration medical system.” Though mass, volume, and power will face increasing constraints, the projected computational capabilities of spacecraft systems will increase exponentially as information technology continues to advance this decade and beyond. Hence, data, software and computational resources will play an essential and synergistic role in maintaining crew health, wellness and performance in deep space missions. The focus of the CDS project is to develop recommended requirements for an in-vehicle CDSS that acts as a ‘virtual assistant’ for delivering optimal health, performance and medical care during exploration missions. The CDSS is envisioned as an integrated, software-based tool deployed on a laptop computer or handheld device. The CDSS will assist the crew and ground support when interacting with knowledge/databases (e.g. records, pharmacy, schedule), instrumentation (e.g. imaging, physiological monitoring devices), and habitat (e.g. wellness system, task performance system) and vehicle systems (e.g. environmental system, communication system). In addition, the human interface will employ a context-based approach that accounts for the crew’s situation. Thus, extraneous and clinically/operationally non-relevant information are reduced to avoid an increase in cognitive load. The framework of an ideal spaceflight CDSS is to include core and advanced analytical features that incorporate work from collaborators yet maintain a flexible platform for integrating new technology in the future. In fiscal year 2021 (FY21), the CDS project identified requirements through two primary mechanisms: (i) the development of software implementation prototypes and (ii) the application of systems engineering processes. The CDS project developed and tested a series of increasingly complex system prototypes that were based on use cases derived from the CDSS concept of operations (ConOps). These software implementations yielded insights on CDSS functionality as well as lessons learned that provided the initial requirements for CDSS capability. By applying a systems engineering (SE) approach, medical scenarios provided in the ConOps and the use cases for software implementation underwent functional decomposition to identify CDSS functionality. Also, systems-based modeling language (SysML) tools such as activity diagrams were developed from the same ConOps and use cases to identify CDSS functionality. The lessons learned from software implementation defined both specific requirements and broad areas of requirements. Within these defined broad requirement areas, further analysis of the SE products identified specific capability that resulted in the final functional requirements. In summary, the software prototypes, functional decomposition of the ConOps and use cases, and SysML diagrams provided the basis for the CDSS requirements developed in FY21. In the upcoming year, these requirements will be refined for their final ExMC baseline review in latter FY22.

Clinical decision support↗

DOE OSTI2025

The gravitational path integral from an observer’s point of view

One of the fundamental problems in quantum gravity is to describe the experience of a gravitating observer in generic spacetimes. In this paper, we develop a framework for describing non-perturbative physics relative to an observer using the gravitational path integral. We apply our proposal to an observer that lives in a closed universe and one that falls behind a black hole horizon. We find that the Hilbert space that describes the experience of the observer is much larger than the Hilbert space in the absence of an observer. In the case of closed universes, the Hilbert space is not one-dimensional, as calculations in the absence of the observer suggest. Rather, its dimension scales exponentially with ${G}_{N}^{-1}$. Similarly, from an observer’s perspective, the dimension of the Hilbert space in a two-sided black hole is increased. We compute various observables probing the experience of a gravitating observer in this Hilbert space. We find that an observer experiences non-trivial physics in the closed universe in contrast to what it would see in a one-dimensional Hilbert space. In the two-sided black hole setting, our proposal implies that non-perturbative corrections to effective field theory for an infalling observer are suppressed until times exponential in the black hole entropy, resolving a recently-raised puzzle in black hole physics. While the framework that we develop is exemplified in the toy-model of JT gravity, most of our analysis can be extended to higher dimensions and, in particular, to generic spacetimes not admitting a conventional holographic description, such as cosmological universes or black hole interiors.

2D gravity↗