Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electrons”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Electron-electron interactions and weak antilocalization in few-layer ZrTe 5 devices

Recently, a lot of efforts have been devoted to the transport properties of relatively thick ZrTe 5 crystals, focusing on their three-dimensional topological effects. ZrTe 5 in its 2D limit, on the other hand, was much less explored experimentally. Here we present detailed magnetotransport studies of few-layer ZrTe 5 devices, in which the coexistence of strong electron-electron interaction and weak anti-localization is observed. The coexistence of the two effects manifests itself in the temperature and magnetic field dependence of the resistance as well as in the universal conductance fluctuations of the few-layer devices. Both effects also show strong two dimensional characteristics. Finally, our results provide new insight into the highly intricate properties of topological material ZrTe 5 .

2-dimensional systems↗
DOE OSTI2021

Smart Readout of Nondestructive Image Sensors with Single Photon-Electron Sensitivity

Image sensors with nondestructive charge readout provide single-photon or single-electron sensitivity, but at the cost of long readout times. We present a smart readout technique to allow the use of these sensors in visible light and other applications that require faster readout times. The method optimizes the readout noise and time by changing the number of times pixels are read out either statically, by defining an arbitrary number of regions of interest in the array, or dynamically, depending on the charge or energy of interest in the pixel. This technique is tested in a Skipper CCD showing that it is possible to obtain deep subelectron noise, and therefore, high resolution of quantized charge, while dynamically changing the readout noise of the sensor. These faster, low noise readout techniques show that the skipper CCD is a competitive technology even where other technologies such as electron multiplier charge coupled devices, silicon photo multipliers, etc. are currently used. This technique could allow skipper CCDs to benefit new astronomical instruments, quantum imaging, exoplanet search and study, and quantum metrology.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2022

Electron Modulational Instability in the Strong Turbulent Regime for an Electron Beam Propagating in a Background Plasma

We study collective processes for an electron beam propagating through a background plasma using simulations and analytical theory. A new regime where the instability of a Langmuir wave packet can grow locally much faster than ion frequency is clearly identified. The key feature of this new regime is an electron modulational instability that rapidly creates a local Langmuir wave packet, which in its turn produces local charge separation and strong ion density perturbations because of the action of the ponderomotive force, such that the beam-plasma wave interaction stops being resonant. Three evolution stages of the process and observed periodic burst features are discussed. In conclusion, different physical regimes in the plasma and beam parameter space are demonstrated for the first time.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Structure, electronic and magnetic characterization, and calculated electronic structures of two oxyhalide hexagonal perovskites

Herein we report the crystal structures, initial magnetic and charge transport characterization, and calculated electronic structures of the hexagonal oxyhalide perovskites, Ba 7 Ru 4 O 15 Cl 2 and Ba 7 Ru 4 O 15 Br 2 . The experimental information is obtained through the study of single crystals. Face-sharing Ru O 6 octahedra form Ru 2 O 9 dimers in a layered triangular geometry in these materials; minor amounts of off-magnetic-site structural disorder are present in our crystals. Both are magnetically isotropic, with 2.5 μB/mol-Ru, Curie-Weiss theta –185 K, and 2.9 μB/mol-Ru, Curie-Weiss theta –168 K, respectively. Broad features in the magnetic susceptibility and heat capacity associated with magnetic ordering (at 35 and 37 K, respectively) are observed. The charge transport band gaps are 0.03 eV for the oxychloride and 0.006 eV for the oxybromide. There is no gap at the Fermi level for either of these compounds in density-functional theory electronic structure calculations.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Modeling and Simulation of Power-Electronic Inverters in Analog Electronic Circuit Simulators

This paper demonstrates how equivalent-circuit representations of grid-following power-electronic inverters can be realized within a SPICE-based development environment using common circuit components and VerilogA code. This facilitates computationally lean simulations of inverter networks leveraging the strengths of SPICE in large-scale simulations. We validate the approach with time-domain simulations for a modified version of the IEEE standard 118-bus system modeled in Virtuoso (a SPICE-based solver). Simulation results are compared-focusing on accuracy and computation speed-with results from a commonly used power-electronics simulation package. We note a significant decrease in simulation time with comparable signal resolution when simulating the network in SPICE.

Billmeyer, Ryan↗
DOE OSTI2024

Modeling and Validation of Offset Cancellation for Hybrid Photonic-Electronic Transimpedance Amplifier Using All-Electronic Circuits

Hybrid photonic-electronic circuits involving crossdomain feedback signals are difficult to validate and troubleshoot. This paper describes an approach to model and validate an offset-cancellation loop for a hybrid transimpedance amplifier (TIA) using all-electronic circuits. An equivalent electrical model is developed for the tunable interferometer attenuators used for offset trimming, and it includes test features to extract the system performance. The stability analysis of the system shows 75 ◦ of phase margin and 102 dB of gain margin. Measurement results demonstrate good agreement with analysis and successful TIA offset cancellation.

Marchant, Jared↗
DOE OSTI2022

Electronic landscape of the f -electron intermetallics with the ThCr 2 Si 2 structure

Although strongly correlated f -electron systems are well known as reservoirs for quantum phenomena, a persistent challenge is to design specific states. What is often missing are simple ways to determine whether a given compound can be expected to exhibit certain behaviors and what tuning vector(s) would be useful to select the ground state. In this review, we address this question by aggregating information about Ce, Eu, Yb, and U compounds with the ThCr 2 Si 2 structure. We construct electronic/magnetic state maps that are parameterized in terms of unit cell volumes and d -shell filling, which reveals useful trends including that (i) the magnetic and nonmagnetic examples are well separated, and (ii) the crossover regions harbor the examples with exotic states. These insights are used to propose structural/chemical regions of interest in these and related materials, with the goal of accelerating discovery of the next generation of f -electron quantum materials.

42 ENGINEERING↗
DOE OSTI2020

X-Ray Diffraction and Electron Microscopy Studies of the Size Effects on Pressure-Induced Phase Transitions in CdS Nanocrystals

In recent years, investigations of the phase transition behavior of semiconducting nanoparticles under high pressure has attracted increasing attention due to their potential applications in sensors, electronics, and optics. However, current understanding of how the size of nanoparticles influences this pressure-dependent property is somewhat lacking. In particular, phase behaviors of semiconducting CdS nanoparticles under high pressure have not been extensively reported. Therefore, in this work, CdS nanoparticles of different sizes are used as a model system to investigate particle size effects on high-pressure-induced phase transition behaviors. In particular, 7.5, 10.6, and 39.7 nm spherical CdS nanoparticles are synthesized and subjected to controlled high pressures up to 15 GPa in a diamond anvil cell. Analysis of all three nanoparticles using in-situ synchrotron wide-angle X-ray scattering (WAXS) data shows that phase transitions from wurtzite to rocksalt occur at higher pressures than for bulk material. Bulk modulus calculations not only show that the wurtzite CdS nanomaterial is more compressible than rocksalt, but also that the compressibility of CdS nanoparticles depends on their particle size. Furthermore, sintering of spherical nanoparticles into nanorods was observed for the 7.5 nm CdS nanoparticles. Our results provide new insights into the fundamental properties of nanoparticles under high pressure that will inform designs of new nanomaterial structures for emerging applications.

Meng, Lingyao↗
DOE OSTI2021

Progress on the Electron Gun Design for a McMillan Electron Lens in the Fermilab Integrable Optics Test Accelerator (IOTA)

This paper covers the progress made so far in designing the first McMillan electron lens for the Fermilab IOTA ring. The novel design allows for an increase in tune spread without limiting the dynamic aperture due to its integrability. Shown are simulations for an electron gun design to generate the specific required current density distribution for the nonlinear integrable system in IOTA.

43 PARTICLE ACCELERATORS↗
DOE OSTI2021

Design Status Update of the Electron-Ion Collider

The design of the electron-ion collider EIC to be constructed at Brookhaven National Laboratory has been continuously evolving towards a realistic and robust design that meets all the requirements set forth by the nuclear physics community in the White Paper. Over the past year activities have been focused on maturing the design, and on developing alternatives to mitigate risk. These include improvements of the interaction region design as well as modifications of the hadron ring vacuum system to accommodate the high average and peak beam currents. Beam dynamics studies have been performed to determine and optimize the dynamic aperture in the two collider rings and the beam-beam performance. We will present the EIC design with a focus on recent developments.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

Design of the Electron Ion Collider Electron Storage Ring SRF cavity

The Electron Ion Collider (EIC) under construction at Brookhaven National Laboratory is a high luminosity collider as the next major research facility for the nuclear physics community. Among the numerous RF subsystems in the EIC, the electron storage ring (ESR) fundamental RF cavities system is one of the most challenging. This system will handle a high beam current of up to 2.5 A and replenish up to 10 MW of beam power losses from synchrotron radiation and HOM. Variable coupling is required in the cavities due to the wide range of required total RF voltage and beam current combinations. In this paper, we will present the status of the design and future plans.

Guo, Jiquan↗
DOE OSTI2024

Design and Prototyping of the Electron Ion Collider Electron Storage Ring 591 MHz Elliptical SRF Cavity

The Electron Ion Collider (EIC) is a new nuclear phys-ics research facility to be constructed at Brookhaven Lab (BNL). It consists a few accelerator complexes, each re-quires some different SRF and RF systems. Among them, the electron storage ring?s (ESR) 591 MHz fundamental RF system is one of the most challenging. This 17 cavi-ties system will handle a variable beam current of up to 2.5 A, and replenish up to 10 MW of beam power losses from both synchrotron radiation (SR) and high-order modes (HOM). In this paper, we will report the progress and findings of the ongoing design and prototyping of this cavity.

Guo, J.↗
DOE OSTI2022

High-Field Design Concept for Second Interaction Region of the Electron-Ion Collider

Efficient realization of the scientific potential of the Electron Ion Collider (EIC) calls for addition of a future second Interaction Region (2nd IR) and a detector in the RHIC IR8 region after the EIC project completion. The second IR and detector are needed to independently cross-check the results of the first detector, and to provide measurements with complementary acceptance. The available space in the existing RHIC IR8 and maximum fields achievable with NbTi superconducting magnet technology impose constraints on the 2nd IR performance. Since commissioning of the 2nd IR is envisioned in a few years after the first IR, such a long time frame allows for more R&D on the Nb₃Sn magnet technology. Thus, it could provide a potential alternative technology choice for the 2nd IR magnets. Presently, we are exploring its potential benefits for the 2nd IR performance, such as improvement of the luminosity and acceptance, and are also assessing the technical risks associated with use of Nb₃Sn magnets. In this paper, we present the current progress of this work.

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

Observations on Microbunching of Electrons in Laser-Driven Plasma Accelerators and Free-Electron Lasers

The periodic longitudinal density modulation of relativistic electrons at the resonant wavelength (microbunching) is a fundamental aspect of free-electron lasers (FELs). In one case, microbunching fractions reached 20% at saturation of a self-amplified spontaneous emission (SASE) FEL resulting in gains of 1 million at 530 nm. In that experiment the $\textit{z}$-dependent gain of coherent optical transition radiation (COTR) was also measured. In laser-driven plasma accelerators (LPAs), microbunching at visible wavelengths has also been recently reported as evidenced by significant COTR enhancements measured in near-field and far-field images on a single shot for the first time. An analytical model for COTR interferometry (COTRI) addresses both cases. The broadband microbunching observed in the LPA case could act as a seed for a SASE FEL experiment with tunability in principle over the visible regime.

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

Electron Ion Collider Machine Protection System: Requirements for an Electron Storage Ring abort system

The Electron Ion Collider (EIC) accelerator complex includes multiple high-energy high-power accelerators [1]. Operation of such a complex is associated with numerous hazards and risks of possible damage to the equipment. The EIC machine protection system (MPS) scope is to protect the components of each accelerator from damage by the beam. The EIC MPS design, commissioning and operation is closely interconnected with the protection of various accelerator subsystems, such as RF-system, cryogenics, vacuum system etc. Yet, the primary goal of the MPS is to protect the EIC accelerators from the possible damage caused by electron and proton beams.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

Design of the Electron Ion Collider Electron Storage Ring SRF cavity

The Electron Ion Collider (EIC) under construction at Brookhaven National Laboratory is a high luminosity collider as the next major research facility for the nuclear physics community. Among the numerous RF subsystems in the EIC, the electron storage ring (ESR) fundamental RF cavities system is one of the most challenging. This system will handle a high beam current of up to 2.5A and replenish up to 10MW of beam power losses from synchrotron radiation and HOM. Variable coupling is required in the cavities due to the wide range of required total RF voltage and beam current combinations. In this paper, we will present the status of the design and future plans.

Guo, J.↗