Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “electron density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Establishment of the correlation law between electron density, infrared absorption and doping concentration in Ga{sup 3+}-doped ZnO

Highlights: ► Synthesis of nanometric A{sup 3+}-doped ZnO by polyol-mediated route. ► Correlation between free electron density and the doping rate of A{sup 3+}-doped ZnO. ► Optimization of infrared absorbing properties of A{sup 3+}-doped ZnO. - Abstract: A polyol-mediated synthesis allows the obtaining of doped zinc oxides nanoparticles with tunable infrared absorption properties via the doping concentration. In a first step the prepared nanoparticles are characterized in terms of chemical composition (purity and homogeneity), crystallite size and agglomerate morphology. A correlation law between the infrared absorbing efficiency, the free electron density and the doping concentration is then clearly established; this law is based on the neighboring probability of the dopant ions in the crystal network.

36 MATERIALS SCIENCE↗

Self-absorption Effects In Experimental Methods Used To Determine Electron Density And Gas Temperature In An Argon Microwave Plasma (SWP) Generated At Atmospheric Pressure

In this work a procedure was applied to verify that self-absorption does not affect the spectral lines used in the experimental determination of the electron density and the gas temperature in surface wave discharges at atmospheric pressure. Therefore, the values of electron density and gas temperature obtained are not perturbed by this phenomenon.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Direct air capture of CO 2 – topological analysis of the experimental electron density (QTAIM) of the highly insoluble carbonate salt of a 2,6-pyridine-bis(iminoguanidine), (PyBIGH 2 )(CO 3 )(H 2 O) 4

Chemical bonding and all intermolecular interactions in the highly insoluble carbonate salt of a 2,6-pyridine-bis(iminoguanidine), (PyBIGH 2 )(CO 3 )(H 2 O) 4 , recently employed in the direct air capture of CO 2 via crystallization, have been analyzed within the framework of the quantum theory of atoms in molecules (QTAIM) based on the experimental electron density derived from X-ray diffraction data obtained at 20 K. Accurate hydrogen positions were included based on an analogous neutron diffraction study at 100 K. Topological features of the covalent bonds demonstrate the presence of multiple bonds of various orders within the PyBIGH 2 2+ cation. Strong hydrogen bonds define ribbons comprising carbonate anions and water molecules. These ribbons are linked to stacks of essentially planar dications via hydrogen bonds from the guanidinium moieties and an additional one to the pyridine nitrogen. The linking hydrogen bonds are approximately perpendicular to the anion–water ribbons. The observation of these putative interactions provided motivation to characterize them by topological analysis of the total electron density. Thus, all hydrogen bonds have been characterized by the properties of their (3,−1) bond critical points. Weaker interactions between the PyBIGH 2 2+ cations have similarly been characterized. Integrated atomic charges are also reported. A small amount of cocrystallized hydroxide ion (∼2%) was also detected in both the X-ray and neutron data, and included in the multipole model for the electron-density refinement. The small amount of additional H + required for charge balance was not detected in either the X-ray or the neutron data. The results are discussed in the context of the unusually low aqueous solubility of (PyBIGH 2 )(CO 3 )(H 2 O) 4 and its ability to sequester atmospheric CO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electron density profile description in the international reference ionosphere

Problems encountered during efforts to reformulate the IRI description of the electron density profile are examined. Consideration is given to Booker's (1979) proposal that the unique, analytic profile functions should cover the entire ionospheric height range. The IRI topside model is reviewed and the electron density profile of the middle and lower ionosphere are discussed. Rawer's (1983) procedure for combining the topside, middle, and lower ionospheric profiles into one analytic profile is reviewed.

Rawer, K.↗

Comparisons of techniques for measurement of D-region electron densities

This paper reviews the ground-based and rocket techniques that are presently being used to determine electron density profiles in the ionospheric D region. Ground-based techniques include VLF, LF, and MF sounding; differential absorption and differential phase measurements using partial reflections; wave interaction; and incoherent scatter. Rocket techniques include differential absorption and Faraday rotation in association with high-resolution dc probes calibrated by means of the radio measurements. The characteristics of the aforementioned techniques are presented, including time and height resolution, accuracy estimates, preferred height ranges, and problems encountered. Electron density profiles obtained with these techniques are presented for comparable solar zenith angles and undisturbed solar and geophysical conditions.

Sechrist, C. F., Jr.↗

Matched dipole probe for magnetized low electron density laboratory plasma diagnostics

In this paper, a diagnostic method for magnetized and unmagnetized laboratory plasma is proposed, based on impedance measurements of a short matched dipole. The range of the measured electron densities is limited to low density plasmas (10{sup 12}–10{sup 15 }m{sup −3}), where other diagnostic methods have strong limitations on the magnetic field strength and topology, plasma dimensions, and boundary conditions. The method is designed for use in both large- and small-dimension plasma (<10 cm) without or with strong non-homogeneous magnetic field, which can be undefined within the probe size. The design of a matched dipole probe allows to suppress the sheath resonance effects and to reach high sensitivity at relatively small probe dimensions. Validation experiments are conducted in both magnetized (B ∼ 170 G) and unmagnetized (B = 0) low density (7 × 10{sup 12 }m{sup −3}–7 × 10{sup 13 }m{sup −3}) low pressure (1 mTorr) 10 cm scale plasmas. The experimentally measured data show very good agreement with an analytical theory both for a non-magnetized and a magnetized case. The electron density measured by the matched dipole and Langmuir probes in the range of 7 × 10{sup 12 }m{sup −3}–7 × 10{sup 13 }m{sup −3} show less than 30% difference. An experimentally measured tolerance/uncertainty of the dipole probe method is estimated to ±1% for plasma densities above 2 × 10{sup 13 }m{sup −3}. A spatial resolution is estimated from the experiments to be about 3d, where d is the dipole diameter. The diagnostic method is also validated by comparing the measured plasma impedance curves with results of analytical modelling.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

An experimental procedure for precise evaluation of electron density distribution of a nanostructured material by coherent x-ray diffraction microscopy

We developed a coherent x-ray diffraction microscopy (CXDM) system that enables us to precisely evaluate the electron density of an isolated sample. This system enables us to determine the dose per surface unit of x rays illuminated onto an isolated sample by combining incident x-ray intensity monitoring and the CXDM of a reference sample. By using this system, we determined the dose of x rays illuminated onto a nanostructured island fabricated by focused-ion-beam chemical vapor deposition and derived the electron density distribution of such a nanostructured island. A projection image of the nanostructured island with a spatial resolution of 24.1 nm and a contrast resolution higher than 2.3x10{sup 7} electrons/pixel was successfully reconstructed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Electron density decrease in SAR arcs resulting from vibrationally excited nitrogen

A study is made of the effect on theoretical electron-density profiles of vibrational enhancement in the rate of the reaction O(+) + N2 yields NO(+) + N. It is shown that the F-region electron-density depression that is observed in stable auroral red (SAR) arcs may be caused by vibrational excitation of molecular nitrogen.

Newton, G. P.↗

A new method for determining the plasma electron density using optical frequency comb interferometer

A new method of plasma electron density measurement using interferometric phases (fractional fringes) of an optical frequency comb interferometer is proposed. Using the characteristics of the optical frequency comb laser, high density measurement can be achieved without fringe counting errors. Simulations show that the short wavelength and wide wavelength range of the laser source and low noise in interferometric phases measurements are effective to reduce ambiguity of measured density.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Numerical studies of independent control of electron density and gas temperature via nonlinear coupling in dual-frequency atmospheric pressure dielectric barrier discharge plasmas

Dielectric barrier discharges (DBDs) provide a promising technology of generating non-equilibrium cold plasmas in atmospheric pressure gases. For both application-focused and fundamental studies, it is important to explore the strategy and the mechanism for enabling effective independent tuning of key plasma parameters in a DBD system. In this paper, we report numerical studies of effects of dual-frequency excitation on atmospheric DBDs, and modulation as well as separate tuning mechanism, with emphasis on dual-frequency coupling to the key plasma parameters and discharge evolution. With an appropriately applied low frequency to the original high frequency, the numerical calculation demonstrates that a strong nonlinear coupling between two frequencies governs the process of ionization and energy deposition into plasma, and thus raises the electron density significantly (e.g., three times in this case) in comparisons with a single frequency driven DBD system. Nevertheless, the gas temperature, which is mainly determined by the high frequency discharge, barely changes. This method then enables a possible approach of controlling both averaged electron density and gas temperature independently.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Rotation dependence of a phase delay between plasma edge electron density and temperature fields due to a fast rotating, resonant magnetic perturbation field

Measurements of the plasma edge electron density n{sub e} and temperature T{sub e} fields during application of a fast rotating, resonant magnetic perturbation (RMP) field show a characteristic modulation of both, n{sub e} and T{sub e} coherent to the rotation frequency of the RMP field. A phase delay PHI between the n{sub e}(t) and T{sub e}(t) waveforms is observed and it is demonstrated that this phase delay PHI is a function of the radius with PHI(r) depending on the relative rotation of the RMP field and the toroidal plasma rotation. This provides for the first time direct experimental evidence for a rotation dependent damping of the external RMP field in the edge layer of a resistive high-temperature plasma which breaks down at low rotation and high resonant field amplitudes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗