SEARCH · Engineering Papers

Results for “eigenvalues”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

All sources NASA NTRS DOE OSTI

NASA NTRS1971

A contracting-interval program for the Danilewski method

The concept of contracting-interval programs is applied to finding the eigenvalues of a matrix. The development is a three-step process in which (1) a program is developed for the reduction of a matrix to Hessenberg form, (2) a program is developed for the reduction of a Hessenberg matrix to colleague form, and (3) the characteristic polynomial with interval coefficients is readily obtained from the interval of colleague matrices. This interval polynomial is then factored into quadratic factors so that the eigenvalues may be obtained. To develop a contracting-interval program for factoring this polynomial with interval coefficients it is necessary to have an iteration method which converges even in the presence of controlled rounding errors. A theorem is stated giving sufficient conditions for the convergence of Newton's method when both the function and its Jacobian cannot be evaluated exactly but errors can be made proportional to the square of the norm of the difference between the previous two iterates. This theorem is applied to prove the convergence of the generalization of the Newton-Bairstow method that is used to obtain quadratic factors of the characteristic polynomial.

Harris, J. D.↗

NASA NTRS1972

Synthesis of shuttle vehicle damping using substructure test results

An empirical method is developed for predicting the modal damping of a combined parallel-stage shuttle model by means of damping measurements performed on the individual substructures. Correlations are first determined for each component in terms of damping energy as a function of peak kinetic energy and modal amplitude. The results are then used to predict component damping energies corresponding to the respective kinetic energies and amplitudes that occur for the new modes of the combined system. Modal characteristics for the system, other than damping, are obtained by a real eigenvalue solution of dynamic equations developed by Hurty's procedure of substructures. System equations, which include component modal damping, are also solved by a complex eigenvalue approach for comparison with results of the empirical method.

Kana, D. D.↗

NASA NTRS1972

On the calculation of panel flutter boundaries.

Methods are described for the complete automation of flutter boundary calculations when the aerodynamic forces are derived from linear three-dimensional unsteady potential flow theory. The usual process of visual curve fairing in the mass ratio versus structural damping plane is replaced by numerical procedures for ordering the eigenvalues in such a way that the n-th eigenvalue is always associated with the same flutter boundary. The mass ratio versus structural damping curves are interpolated via parametric cubic spline functions to produce the desired plots in the stiffness-parameter/mass-ratio plane. The entire process is accomplished in a single computer run.

Gaspers, P. A., Jr.↗

NASA NTRS1972

An improved general algorithm for arbitrary pole assignment.

A new pole-placement algorithm for multi-input controllable systems is presented. The algorithm can be used to obtain real-valued feedback gains for arbitrarily specified real and complex, distinct or multiple eigenvalues. The multi-input controllable time-invariant system is converted to a single-input system. Pole assignment is achieved by making use of certain properties of the equation TF - AT = D, where A is the open-loop system matrix and F represents a matrix having the desired closed-loop eigenvalues.

Willner, L.↗

NASA NTRS1973

Multidimensional analysis of fast-spectrum material replacement measurements for systematic estimation of cross section uncertainties

A series of central core and core-reflector interface sample replacement experiments for 16 materials performed in the NASA heavy-metal-reflected, fast spectrum critical assembly (NCA) were analyzed in four and 13 groups using the GAM 2 cross-section set. The individual worths obtained by TDSN and DOT multidimensional transport theory calculations showed significant differences from the experimental results. These were attributed to cross-section uncertainties in the GAM 2 cross sections. Simultaneous analysis of the measured and calculated sample worths permitted separation of the worths into capture and scattering components which systematically provided fast spectrum averaged correction factors to the magnitudes of the GAM 2 absorption and scattering cross sections. Several Los Alamos clean critical assemblies containing Oy, Ta, and Mo as well as one of the NCA compositions were reanalyzed using the corrected cross sections. In all cases the eigenvalues were significantly improved and were recomputed to within 1 percent of the experimental eigenvalue. A comparable procedure may be used for ENDF cross sections when these are available.

Klann, P. G.↗

NASA NTRS1972

SYMAT, COVAR: Test Procedures for Matrix Calculations

The FORTRAN subroutine SYMAT and related subroutines are described. In essence SYMAT is an iterative algorithm in which the problem of finding eigenvalues and eigenvectors of a real symmetric matrix is transformed into an equivalent problem of finding eigenvalues and eigenvectors of an infinite sequence of matrices of order two. A DEMO PROGRAM contains a subroutine COVAR which is used to compute the covariance matrix (denoted by A) of a data matrix (denoted by X). Since a covariance matrix is symmetric it can be analyzed by using subroutine SYMAT.

Morris, W. L.↗

NASA NTRS1972

Diffraction of a plane pulse by a three-dimensional corner.

The conical solutions for the incidence of a plane pulse on a three-dimensional corner are presented. The corner is represented by a trihedron with one edge perpendicular to the other two. Both the boundary condition of the first kind and that of the second kind are considered. Outside the characteristic sphere of the vertex of the corner, the solution is represented by the well-known conical solutions in two variables. Inside the characteristic sphere, the problem involves three conical variables. By the separation of variables, the problem is reduced to that of an eigenvalue problem with an irregular boundary which is in turn reduced to a system of homogeneous algebraic equations. The eigenvalues are then determined numerically. By the superposition of the conical solutions for plane pulses, the solution for the incidence of a plane wave is obtained. Numerical examples simulating the incidence of a sonic boom on the corner of a structure are presented.

Ting, L.↗

NASA NTRS1973

Transient analysis using conical shell elements

The use of the NASTRAN conical shell element in static, eigenvalue, and direct transient analyses is demonstrated. The results of a NASTRAN static solution of an externally pressurized ring-stiffened cylinder agree well with a theoretical discontinuity analysis. Good agreement is also obtained between the NASTRAN direct transient response of a uniform cylinder to a dynamic end load and one-dimensional solutions obtained using a method of characteristics stress wave code and a standing wave solution. Finally, a NASTRAN eigenvalue analysis is performed on a hydroballistic model idealized with conical shell elements.

Yang, J. C. S.↗

NASA NTRS1973

Fast modal extraction in NASTRAN via the FEER computer program

A new eigensolution routine, FEER (Fast Eigensolution Extraction Routine), used in conjunction with NASTRAN at Israel Aircraft Industries is described. The FEER program is based on an automatic matrix reduction scheme whereby the lower modes of structures with many degrees of freedom can be accurately extracted from a tridiagonal eigenvalue problem whose size is of the same order of magnitude as the number of required modes. The process is effected without arbitrary lumping of masses at selected node points or selection of nodes to be retained in the analysis set. The results of computational efficiency studies are presented, showing major arithmetic operation counts and actual computer run times of FEER as compared to other methods of eigenvalue extraction, including those available in the NASTRAN READ module. It is concluded that the tridiagonal reduction method used in FEER would serve as a valuable addition to NASTRAN for highly increased efficiency in obtaining structural vibration modes.

Newman, M. B.↗

NASA NTRS1974

Results on the two population feature selection problem using probability of correct classification as a criterion

Variational equations are presented for maximizing the probability of correct classification as a function of a 1xn feature selection matrix B for the two-population problem. For the special case of equal covariance matrices the optimal B is unique up to scalar multiples and rank one sufficient. For equal population means, the best 1xn B is an eigenvector corresponding either to the largest or smallest eigenvalue of sigma sub 2 to the minus 1 power sigma sub 1 where sigma sub 1 and sigma sub 2 are the nxn covariance matrices of the two populations. The transformed probability of correct classification depends only on the eigenvalue. Finally, a procedure is proposed for constructing an optimal or nearly optimal kxn matrix of rank k without solving the k-dimensional variational equation.

Peters, B. C.↗

NASA NTRS1974

Perturbation solutions for the influence of forward flight on helicopter rotor flapping stability

The stability of the flapping motion of a helicopter rotor blade in forward flight is investigated, using a perturbation technique which gives analytic expressions for the eigenvalues, including the influence of the periodic aerodynamic forces in forward flight. The perturbation solutions are based on small advance ratio (the ratio of the helicopter forward speed to the rotor tip speed). The rotor configurations considered are a single, independent blade; a teetering rotor; a gimballed rotor with three, four, and five or more blades; and a rotor with N independent blades. The constant coefficient approximation with the equations and degrees of freedom in the nonrotating frame represents the flap dynamic reasonably well for the lower frequency modes, although it cannot, of course, be completely correct. The transfer function of the rotor flap response to sinusoidal pitch input is examined, as an alternative to the eigenvalues as a representation of the dynamic characteristics of the flap motion.

Johnson, W.↗

NASA NTRS1974

Application of antiresonance theory to helicopters

Antiresonance theory is the principle underlying nonresonant nodes in a structure, and covers both nonresonant nodes occurring naturally and those introduced by devices such as dynamic absorbers and antiresonant isolators. The dynamic antiresonant vibration isolator (DAVI) and the nodale module are examples of the applications of transfer antiresonances. It is shown that antiresonances are eigenvalues, and that they can be determined by matrix iteration. Applications of antiresonance theory to helicopter engineering problems, using the antiresonant eigenvalue equation are suggested.

Bartlett, F. D., Jr.↗

NASA NTRS1973

Theoretical study of H2/+/ spectroscopic properties. II, III

Description of the theoretical spectroscopic properties of the 2p pi/sub u/ and 3d sigma/sub g/ excited states of the H2/+/ hydrogen molecular ion. Numerical integration of the Schrodinger equation is used to determine vibration-rotation eigenvalues. Dunham power series expansions are used to determine the equilibrium separation, potential coefficients, and spectroscopic constants. The eigenvalues are used to determine delta-G, Bv, Dv, and Hv.

Beckel, C. L.↗

NASA NTRS1974

Analytical and experimental investigation of a 1/8-scale dynamic model of the shuttle orbiter. Volume 1: Summary report

A 1/8-scale structural dynamics model of the space shuttle orbiter was analyzed using the NASA Structural Analysis System (NASTRAN). Comparison of the calculated eigenvalues with preliminary test data for the unrestrained condition indicate that the analytical model was consistently stiffer, being about 20% higher in the first mode. The eigenvectors show reasonably good agreement with test data. A series of analytical and experimental investigations undertaken to resolve the discrepancy are described. Modifications in the NASTRAN model based upon these investigations resulted in close agreement for both eigenvalues and eigenvectors.

Mason, P. W.↗

NASA NTRS1974

Development of technology for fluid-structure interaction modeling of a 1/8-scale dynamic model of shuttle External Tank (ET). Volume i: Technical report

A NASTRAN analysis of the external tank (ET) substructure of the 1/8-scale space shuttle structural dynamics model is described. The NASTRAN hydroelastic procedures were used to form a model of the liquid oxygen portion of the ET. Large computer storage requirements and running times were required unless these procedures were modified. Several possibilities were demonstrated including the substitution of the real for the complex eigenvalue routine and the use of the OMIT capability to reduce the number of fluid coordinates. A NASTRAN model of the complete ET was formed and reduced to 252 degrees of freedom. A review of the eigenvector extracted, using the unsymmetrical inverse power method, indicated that the structural OMIT's resulted in unsatisfactory modal deflections. Modifications to the NASTRAN hydroelastic capability appeared necessary to generate a successful ET model. An approach is described which, by assuming incompressibility, reduces the fluid representation to a symmetric mass matrix which can be added to the structural mass. The problem is solved using faster and more efficient eigenvalue routines. Using this approach the ET NASTRAN model was analyzed for three separate weight conditions.

Bernstein, M.↗

NASA NTRS1975

Relaxation methods in fluid mechanics

The present work considers the iterative solution of a coupled set of difference equations and examines methods that carry successive approximates to a state that is invariant with further iteration and independent of the initial guess. Methods are studied with regard to their efficiency and economy of computer resources. The basic principles of classical relaxation are set forth, with attention confined to linear elliptic equations. This discussion involves the evaluation of the spectral radius that is the magnitude of the eigenvalue with largest modulus. The subject of relaxation is then related to the study of ordinary differential equations and hyperbolic partial differential equations. Problems that occur when linearly dependent eigenvectors appear in the relaxation matrix are discussed, leading to multiply connected eigenvalues in the Jordan canonical form. Finally, a brief survey of relaxation methods used in aerodynamics is given.

Lomax, H.↗

NASA NTRS1975

Degree of interdependence among atmospheric optical thicknesses in spectral bands between 0.36-2.4 micron

The degree of dependence among the atmospheric optical thicknesses that are measured in nonselective absorption bands is studied. The observations were made previously in many spectral bands within the range 0.36-2.4 micron from near sea level in two continents where urban and industrial pollutions were weak. The sample covariance matrices and corresponding eigenvalues and eigenvectors are computed. The two highest eigenvalues account for 90% of the total variance in 10 spectral bands within the range 0.4-1.6 micron. The linear regression of the optical thickness on the total precipitable water vapor is computed to determine the attenuation coefficient that is associated with water vapor. This coefficient shows a rapid power-law decrease with wavelength in the visible spectrum and indicates that numerous water particles of radius 0.03-0.06 micron cause the attenuation.

Fraser, R. S.↗

NASA NTRS1976

Free vibration analysis of spinning flexible space structures

Efficient computation of natural frequencies and associated free vibration modes of spinning flexible structures is required to accurately determine the nature of interaction between the flexible structure and the attitude control system, which is vital in relating control torques to attitude angles. While structural discretization is effected by the finite element method, the resulting eigenvalue problem is solved by a combined Sturm sequence and inverse iteration procedure that yields a few specified roots and associated vectors. An eigenvalue procedure, based on a simultaneous iteration technique, provides efficient computation of the first few roots and vectors; a modal synthesis procedure proves to be useful for eigenproblem solutions of unusual structures such as spacecraft.

Gupta, K. K.↗