Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “edge current”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Fabrication of 8-Strand Rutherford Cables Using Roped Strands Made from Ultrafine Wires

Conventional Rutherford cables are typically made from solid round wire. While multi-stage cables have been made elsewhere, the purpose was usually to achieve a higher strand count and therefore a higher current carrying capability. In this work, we attempt to use two-stage roped strands made from ultrafine wires to fabricate Rutherford cables. The ultimate goal of this work is to obtain a very flexible cable that can wind accelerator magnet coils with a very tight bend radius in both the “easy way” (along the broad face of the cable) and the “hard way” (along the edge of the cable) in the wind-and-react manner, or wind coils with a radius typically used today but in the react and-wind manner with a much reduced degradation in critical current. We report our experience fabricating such Rutherford cables at the Lawrence Berkeley National Laboratory, and the initial findings from the analysis of the experimental cables made. We will discuss how the conventional wisdom and some rules of thumb for making Rutherford cables are no longer applicable or relevant, and the new thinking required in designing these cables.

Pong, Ian↗
DOE OSTI2024

Avalanche statistics of fluctuation-induced fluxes from the SLPM and the W7-AS stellarator

Measurements of fluctuating floating potentials and ion saturation currents at different radial locations in the Santander Linear Plasma Machine (Castellanos et al 2005 Plasma Phys. Control. Fusion47 2067) and at the edge of the W7-AS stellarator by means of radially movable Langmuir probes allow to infer the corresponding fluctuation-induced radial flux temporal series. Avalanche-like transport events are identified in the time series and statistically characterized in terms of avalanche size/duration/quiet-time distributions and size-duration scaling relations. Transport is diffusive in the inner and intermediate radial region of the SLPM r < r tr ≈ 2.6 cm, undergoing a transition at r tr , becoming non-diffusive in the outermost region of the device, r > r tr . Here, the results obtained at the edge of the W7-AS stellarator are similar to those found in SLPM for r > r tr , i.e. consistent with what would be expected for scale-free, self-similar plasma transport dynamics near a critical state.

Avalanches↗
DOE OSTI2022

Energizing charged particles by an orbit instability in a slowly rotating magnetic field

In this work, the stability of charged particle motion in a uniform magnetic field with an added spatially uniform transverse rotating magnetic field (RMF) is studied analytically. It is found that the stability diagram of a single particle's orbit depends critically on the chosen boundary conditions. We show that for many boundary conditions and wide regions in the parameter space, RMFs oscillating far below the cyclotron frequency can cause linear instabilities in the motion which break μ invariance and energize particles. Such energization may appear at odds with the adiabatic invariance of μ; however, adiabatic invariance is an asymptotic result and does not preclude such heating by magnetic fields oscillating at slow frequencies. This mechanism may contribute to heating in the edge plasma of field-reversed configurations (FRCs) in rotamak-FRC experiments. Furthermore, these RMF-driven instabilities may significantly enhance azimuthal current drive during the formation of FRCs in such devices.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

LANL Weapons Physics Directorate: Mission Scope and Opportunities [Slides]

The Weapons Physics Directorate stewards a number of critical capabilities to meet the LANL mission. To execute our mission, ALDX develops and applies cutting-edge theory, computational models and multi-physics simulation codes, and designs, executes, and analyzes complex experiments. Our mission is to sustain the current stockpile, provide future stockpile options, and help shape a globalized nuclear world.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2023

Using the Stix finite element RF code to investigate operation optimization of the ICRF antenna on Alcator C-Mod

Abstract As the Ion Cyclotron Radio Frequency range (ICRF) heating becomes more favorable in fusion devices, the urgency of predicting and mitigating impurity generation that arises from it becomes more pressing. In the ICRF regime, rectified Radio Frequency (RF) sheaths are known to form at antenna and material edges that influence negative effects like sputtering and a decrease in heating efficiency. Methods to mitigate the formation of these RF sheaths through RF image currents cancellation have been experimentally studied. A power-phasing scan done on Alcator C-Mod in which the amount of power on the two inner straps ( P in ) versus the total 4 straps ( P tot ) was varied showed a minimization of enhanced potentials between P in / P tot ∼ 0.7–0.9 while impurities were minimized for P in / P tot ∼ 0.5–0.8. New capabilities in the realm of representing the RF sheath numerically now allow for these experiments to be simulated. Given the size of the sheath relative to the scale of the device, it can be approximated as a Boundary Condition (BC). A new parallelized cold-plasma wave equation solver called Stix implements a non-linear sheath impedance model BC formulated by Myra et al (2015 Phys. Plasmas 22 062507) through the method of finite elements using the MFEM library [ http://mfem.org ]. It is seen that Stix shows qualitative agreement with the measured C-Mod enhanced potentials.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Tearing Stable Stationary ITER Baseline Operation in DIII-D

We present a tearing stable, stationary and reproducible operating solution for DIII-D plasmas characterized by the ITER Baseline Scenario normalized parameter set and shape. In these plasmas low differential rotation (Δf1,2) between the core and edge is identified as the single root cause of the onset of the primary limiting instability, the 2,1 Neoclassical Tearing Mode (NTM), while a group of other examined parameters have a much weaker impact on the stability. Explanation is offered by drift kinetic simulations, which show a six-fold reduction in the NTM onset threshold due to diminished stabilizing ion polarization currents when the seed island drift frequency ceases in the local plasma frame. Based on the experimental observation and the explanation provided by the theory, a new method is developed to sustain Δf1,2 by modifying the edge neoclassical potential through neutral gas fueling. This method enables stationary ITER baseline operation free of disruptive 2,1 tearing modes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Dislocation-Activated Low Platinum-Loaded PtCu Nanoparticles Welded onto the Substrate for Practical Acidic Hydrogen Generation

Although transition metal (M) alloying with platinum (Pt) is a promising approach to reduce the Pt dosage required in the hydrogen evolution reaction (HER), the catalytic activity and durability of PtM alloy are often unsatisfactory for acidic HER, especially at high currents, due to a reduced number of highly active sites (Pt) at the atomic level and challenges in stabilizing them to prevent detachment and aggregation. Herein, we report a robust functional structure integrated electrode (D-PtCu/CF) with abundant edge dislocations and very low platinum content (0.1 mg cm -2 ) to achieve high activity and stability in acidic HER within a proton exchange membrane water electrolysis cell (PEMWE). D-PtCu/CF exhibits high Pt mass activity (10.28 A mg Pt -1 ) and excellent operational stability (negligible decay after 200 h). X-ray absorption spectroscopy and in situ electrochemical experiments reveal that the lattice distortion caused by edge dislocations in PtCu mainly affects Pt atoms by compressing strain, reducing their ability to adsorb H. At the same time, Cu atoms are subjected to tensile strain, enhancing the bonding between Cu and H. Therefore, edge dislocations not only improve the intrinsic catalytic activity of Pt atoms but also increase the number of active sites (Cu) available for hydrogen adsorption, which synergistically accelerates the kinetics of the HER reaction. Finally, the PEMWE employing the D-PtCu/CF catalytic electrode can operate stably for 100 h at an industrial-level current density of 500 mA cm -2 with 1.63 V.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2026

Machine Learning on Heterogeneous, Edge, and Quantum Hardware for Particle Physics (ML-HEQUPP)

The next generation of particle physics experiments will face a new era of challenges in data acquisition, due to unprecedented data rates and volumes along with extreme environments and operational constraints. Harnessing this data for scientific discovery demands real-time inference and decision-making, intelligent data reduction, and efficient processing architectures beyond current capabilities. Crucial to the success of this experimental paradigm are several emerging technologies, such as artificial intelligence and machine learning (AI/ML) and silicon microelectronics, and the advent of quantum algorithms and processing. Their intersection includes areas of research such as low-power and low-latency devices for edge computing, heterogeneous accelerator systems, reconfigurable hardware, novel codesign and synthesis strategies, readout for cryogenic or high-radiation environments, and analog computing. This white paper presents a community-driven vision to identify and prioritize research and development opportunities in hardware-based ML systems and corresponding physics applications, contributing towards a successful transition to the new data frontier of fundamental science.

Gonski, Julia [SLAC]↗
DOE OSTI2024

Full-wave simulations on helicon and parasitic excitation of slow waves near the edge plasma

Helicon waves are thought to be promising in various tokamaks, such as DIII-D, because they can penetrate reactor-grade high-density cores and drive the off-axis current with higher efficiency. In the frequency regime ~476 MHz, both slow electrostatic and fast electromagnetic helicon waves can coexist in DIII-D. If the antenna parasitically excites the slow mode, these waves can propagate along the magnetic field line into the scrape-off layer (SOL). Although the importance of the misalignment of the Faraday screen and the electron density in the SOL on the excitation and propagation of slow modes is well known, the conditions for minimizing slow mode excitation have yet to be optimized. Using the Petra-M simulation code in the 2D domain, we analyze the effects of the misalignment of the antenna in the poloidal direction, the misalignment of the Faraday screen in the toroidal direction, and the density in front of the antenna on slow mode generation. Our results suggest that the misalignment of the Faraday screen is a critical factor in reducing the slow mode and that the misalignment angle should be below ~5° to minimize the slow wave excitation. When the electron density is higher than 3.5 x 10 18 m –3 in the SOL, the generation of the slow mode from the antenna is minimized and unaffected by the misalignment of the Faraday screen.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Absolute measurement of vacuum ultraviolet photon flux in an inductively coupled plasma using a Au thin film

A new method for absolute measurement of the vacuum ultraviolet (VUV) photon flux at the edge of a plasma is described. The light produced by the plasma was allowed to strike a negatively biased, gold-coated copper substrate remote from the plasma. The resulting photoelectron emission current was measured, and the absolute photon flux was then found from the known photoelectron yield of Au. The method was used to quantify the amount of VUV light produced by an Ar/He inductively coupled plasma (ICP). Strong emissions at 104.82 and 106.67 nm, corresponding to the 1s 2 and 1s 4 resonant states of Ar, were observed. The maximum, integrated VUV photon flux measured at the remote location was 3.2 × 10 13 photons/cm 2 s. This was estimated to correspond to a flux of 5 × 10 15 photons/cm 2 s at the edge of the ICP, in the range of reported values under similar conditions.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2026

Cathodic Protection Modeling for Hanford Underground Double-Shell Tank Farms

Hanford stores millions of gallons of radioactive and chemically hazardous waste from the production of weapon materials in tank farms consisting of underground carbon-steel storage tanks surrounded by reinforced concrete. Six of these Hanford tank farms use double-shell storage tanks (DSTs). The DST farms were constructed from 1968 to 1986 with a planned 40–50 year design life, so some are already operating beyond their initial life expectancy. Ultrasonic testing (UT) has indicated significant thinning on the bottom of the secondary (outer) liner of these tanks, believed to arise from groundwater intrusion driving concrete side corrosion. There is no direct access to the steel/concrete interface between the tank and the concrete pad, making it difficult to apply a chemical-based mitigation strategy or to conduct repairs, but cathodic protection (CP) is a possible method to inhibit further concrete-side corrosion. Hanford already uses CP to protect below grade steel piping within the tank farms and connected to the tanks, but this system was not designed to protect the tank bottoms. CP design must account for the structures surrounding the DSTs, including the steel reinforcing bars (rebar) within the concrete pad and vault, various process lines, and the existing CP system. In this study, finite element analysis (FEA) modeling was carried out to simulate CP protection of 1) a single tank and CP anode to develop options for modeling the rebar and to compare to a simpler circuit model and 2) the entire Hanford AN tank farm as a representative example consisting of seven tanks, associated piping, and both existing and new CP anodes. Both circuit and FEA models predict that significant protective current could be delivered to the bottoms of the tanks with the addition of tank-protection anodes below the depth of the tanks. Simulations with only the existing pipe-protection anodes active confirmed that only a very small current to the tank bottoms is predicted under present conditions. Multiple simplified representations of the dome and wall rebar were tested to reduce the computational complexity of the tank-farm simulations, resulting in modeling the rebar as edge elements with a prescribed effective circumference that matches the real rebar surface area. The geometry of the rebar is also simplified into horizontal hoops around the tank walls and radial rebar over the dome with increased effective circumference to retain the target surface area. This simplification was found to greatly reduce the complexity and solution time of the models without large changes in current distributions, especially to the tank bottom. A range of values were tested for model parameters such as soil and concrete resistivities and polarization resistance to investigate their impact on the current and electric potential distributions. Depending on the parameters used, FEA simulations predict some risk of overprotection, particularly on the piping system; since overprotection can also lead to surface damage associated with hydrogen gas generation at the interface (e.g. hydrogen embrittlement or damage to coatings), this needs to be considered when refining the design of the new CP system. Comparison between the FEA models and the circuit model representation demonstrated that the circuit model could not match the predicted FEA current distribution, even when using the exact same surface areas. This discrepancy appeared to be at least partly attributable to the impact of the relative positions of the tank components and anodes to each other and to the ground surface. The FEA model accounts for the relative positions since it solves the governing equations in three dimensions, but the circuit model cannot account for the positioning. In particular, the circuit model underpredicts the current to the tank bottom and overpredicts the current to the dome compared to FEA for the baseline geometry. The FEA models omitted the electrically isolated rebar in the bottom concrete slab. However, a circuit based stray current model estimated that only 2.1% of the total current through the slab would stray into the rebar, corresponding to ~0.21 A for a target current density of 2 mA/ft2 to the tank bottom. The estimated corrosion driven by this amount of stray current is predicted to yield a lifetime of >400 years for the minimum rebar diameter, assuming an acceptable cross-section area loss of 10%.

d'Entremont, Anna [Savannah River National Laborat↗
DOE OSTI2022

Pressure-Driven Changes in the Electronic Bonding Environment of GeO 2 Glass above Megabar Pressures

Noncrystalline oxides under pressure undergo gradual structural modifications, highlighted by the formation of a dense noncrystalline network topology. The nature of the densified networks and their electronic structures at high pressures may account for the mechanical hardening and the anomalous changes in electromagnetic properties. Despite its importance, direct probing of the electronic structures in amorphous oxides under compression above the Mbar pressure (>100 GPa) is currently lacking. Here, we report the observation of pressure-driven changes in electronic configurations and their delocalization around oxygen in glasses using inelastic X-ray scattering spectroscopy (IXS). In particular, the first O K-edge IXS spectra for compressed GeO 2 glass up to 148 GPa, the highest pressure ever reached in an experimental study of GeO 2 glass, reveal that the glass densification results from a progressive increase of oxygen proximity. While the triply coordinated oxygen [3] O is dominant below ~50 GPa, the IXS spectra resolve multiple edge features that are unique to topologically disordered [4] O upon densification above 55 GPa. Topological compaction in GeO 2 glass above 100 GPa results in pronounced electronic delocalization, revealing the contribution from Ge d-orbitals to oxide densification. Strong correlations between the glass density and the electronic configurations beyond the Mbar conditions highlight the electronic origins of densification of heavy-metal-bearing oxide glasses. Furthermore, current experimental breakthroughs shed light on the direct probing of the electronic density of states in high-Z oxides above 1 Mbar, offering prospects for studies on the pressure-driven changes in magnetism, superconductivity, and electronic transport properties in heavy-metal-bearing oxides under compression.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Nafion Passivation of c-Si Surface and Edge for Electron Paramagnetic Resonance

Effective surface passivation of crystalline silicon (c-Si) surface by reducing the carrier recombination rate has led to modern c-Si solar cells with efficiencies > 25% in both laboratory and industrial settings. Typical mainstream surface passivation techniques include high-temperature silicon oxide (SiOx), amorphous silicon (a-Si:H), hydrogen-rich silicon nitride (SiNx), and aluminum oxide (Al2O3) [1]. They have demonstrated excellent surface recombination velocity of < 1 cm/s owing to both chemical passivation (via the hydrogen saturation of Si dangling bonds at the c-Si surface), and field-effect passivation (via the band bending from the fixed charge of the dielectric layers). Recently, several groups have studied solution-based organic materials for c-Si passivation, including bis(trifluoromethane)sulfonimide (TFSI), polystyrenesulfonate, and Nafion [2, 3] via spin or dip coating. All films were processed at ambient room temperature, and a high lifetime of 12 ms, as well as a low saturation current density (J0) of 16 fA/cm2, have been demonstrated using Nafion passivation [2]. However, despite the air instability, Nafion has several advantages when introduced to PV applications: (a) Wafer quality can be measured at high throughput after several process stages. (b) It is compatible with PL mapping, compared to HF liquid passivation which cannot be performed in room ambient. (c) Nafion process is fast and poses fewer constraints on process complexity, and cleanness, compared to Al2O3 and a-Si:H passivation. (d) Nafion is the ideal room temperature passivation, which can be applied onto a small fragment of a degraded module to investigate microscopic mechanisms when studying degradation mechanisms. Edge passivation is needed for advanced characterization tests such as Electron Paramagnetic Resonance (EPR), Electrically Detected Magnetic Resonance (EDMR), Deep Level Transient Spectroscopy (DLTS), local cell current-voltage (J-V), and Suns-Voc. In such cases, the laser-damaged minicell edges will obscure the true degradation mechanisms, and Nafion can effectively passivate them without causing further degradation through elevated-temperature processes. In this contribution, we show the passivation results of Nafion on bare nCz and compare it with a Al2O3 witness. We highlight the importance of edge pre-treatment before Nafion to achieve good passivation. We show that Nafion can reach decent passivation without undergoing high-temperature processes. We also explore the temperature dependency of Nafion through photoluminescence (PL) study and demonstrate the application of Nafion under cryogenic temperature (~6 K) through EPR. Our results reveal that Nafion can reduce surface and edge Si dangling bonds at low temperatures. Thus, it can be used as an effective room temperature passivation technique for advanced characterization methods.

c-Si↗
DOE OSTI2020

KOTO vs. NA62 dark scalar searches

The two kaon factories, KOTO and NA62, are at the cutting edge of the intensity frontier, with an unprecedented numbers of long lived and charged Kaons,~10 13 , being measured and analyzed. These experiments have currently a unique opportunity to search for dark sectors. In this paper, we demonstrate that searches done at KOTO and NA62 are complementary, both probing uncharted territories. We consider two qualitatively different physics cases. In the first, we analyze models of axion-like-particles (ALP) which couple to gluons or electroweak gauge bosons. In the second, we introduce a model based on an approximate strange flavor symmetry that leads to a strong violation of the Grossman-Nir bound. For the first scenario, we design a new search strategy for the KOTO experiment,K L → π 0 a →4γ. Its expected sensitivity on the branching ratio is at the level of 10 -9 . This demonstrates the great potential of KOTO as a discovery machine. In addition, we revisit other bounds on ALPs from Kaon factories, highlighting the main sources of theoretical uncertainty, and collider experiments, and show new projections. For the second scenario, we show that the model may be compatible with the preliminary analysis of the KOTO-data that shows a hint for New Physics.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗
DOE OSTI2025

Operando Contactless EFISH Study of the Rate-Determining Step of Light-Driven Water Oxidation on TiO 2 Photoanodes

For many slow solar-fuel-forming reactions, the accumulation of photogenerated minority carriers on the photoelectrode surface leads to light-induced band edge unpinning, affecting the junction properties by decreasing band bending in the semiconductor space charge layer and increasing the driving force of surface reactions in the electric double layer. In this study, we demonstrate a contactless operando electric field-induced second harmonic generation (EFISH) method for measuring the band bending change (δΔΦ SCR L ) on photoelectrodes upon photoexcitation. For ndoped rutile TiO 2 water oxidation photoanodes at pH 7, δΔΦ SCR L increases at more positive potentials or higher illumination power density until it reaches saturation values. We show that under fast mass transport conditions, δΔΦ SCR L is exclusively attributed to the accumulated charged rate-determining species that can be regarded as temporary surface states, and the relationship between the photocurrent and δΔΦ SCR L can be well modeled by assuming that hole trap states function as the reaction center. Kinetic isotope experiments identify proton-coupled electron transfer as the rate-determining step and suggest a possible chemical nature of the key intermediate. We demonstrate that light-induced band edge unpinning is a beneficial feature under high illumination conditions for oxygen evolution reaction on TiO 2 because it maintains the photon-to-current conversion efficiency by enhancing the surface reaction driving force, shedding light on the actual device application.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Asymptotic vacuum solution at tokamak X-point tip

In the H-mode regime of diverted tokamaks, the presence of strong pressure gradients in the pedestal gives rise to a sizable bootstrap current, together with the Ohmic and Pfirsch–Schlueter currents, close to the separatrix. For such equilibria, the presence of finite current density close to the separatrix requires the reexamination of equilibrium properties. It is almost universally assumed that the two branches of the separatrix (the stable and unstable manifolds) are straight as they cross at the X-point. However, the opposite angles of the plasma-filled segment and vacuum one cannot be equal if the current density does not vanish at the separatrix on the plasma side. We solve this difficulty by chipping off a thin layer of plasma edge so that the sharp corner of the plasma-filled segment becomes a hyperbola. Using the conformal transformation, we found that in the assumption of a hyperbolic boundary, the X point moves beyond the plasma boundary to fall in the vacuum region. An acute angle of the plasma-filled segment leads to an obtuse opposite angle of vacuum segment and vice versa. In the case of an acute angle of the plasma-filled segment, the new X point shifts inside the X point formed by the asymptotes of a hyperbolic boundary; in the case of an obtuse angle of the plasma-filled segment, the new X point shifts outside the X point formed by the asymptotes of a hyperbolic plasma boundary. Furthermore, the results are important for understanding the X point features, which affect the tokamak edge stability and transport.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2024

Present and future of $\mathcal{C}$osmo $\mathcal{L}$attice

We discuss the present state and planned updates of Cosmo Lattice, a cutting-edge code for lattice simulations of non-linear dynamics of scalar-gauge field theories in an expanding background. We first review the current capabilities of the code, including the simulation of interacting singlet scalars and of Abelian and non-Abelian scalar-gauge theories. We also comment on new features recently implemented, such as the simulation of gravitational waves from scalar and gauge fields. Secondly, we discuss new extensions of Cosmo Lattice that we plan to release publicly. We comment on new physics modules, which include axion-gauge interactions $\phi F\tilde{F}$, non-minimal gravitational couplings $\phi ^2R$, creation and evolution of cosmic-defect networks, and magnetohydrodynamics. Finally, we also discuss new technical features, including evolvers for non-canonical interactions, arbitrary initial conditions, simulations in 2+1 dimensions, and higher-accuracy spatial derivatives.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2024

Reducing beta functions in the NSLS-II long straight section for NEXT-III beamlines

The NSLS-II Experimental Tools III (NEXT-III) Project with the goal of building 8-12 new beamlines is ongoing. We were requested to explore the possibility of modifying the long straight section in Cell 26 to accommodate two new undulators for Advanced Nanoscale Imaging (ANI) Beamline and Tender X-ray Nanoprobe (TXN) Beamline. The scope of work includes: linear lattice matching; confirmation of the minimum ID gaps consistent with beam stay-clear limitations; calculation of the X-ray brightness; optimization of the dynamic aperture and momentum acceptance; multi-particle tracking to confirm the injection efficiency does not deteriorate significantly. The beam simulations have to be done using the most recent NSLS-II lattice model with all present insertion devices and realistic magnet errors, misalignments, and apertures. Originally two lattice options were considered for the assessment:1) with single -minimum beta functions and 2) NSLS-II with double-minimum beta functions. However, since the beamlines are not interested in the reduction of the horizontal beta function, just the vertical one, we decided to stop considering the single-minimum option because the current vertical beta is already low (3.3m) and further reducing it at the straight section center can increase it too much at the edge of a long ID, and limit the beam stay-clear. So, this report is focused on the double mini-beta scheme only.

43 PARTICLE ACCELERATORS↗