Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “crustal deformation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS2006

Applying Parallel Adaptive Methods with GeoFEST/PYRAMID to Simulate Earth Surface Crustal Dynamics

This viewgraph presentation reviews the use Adaptive Mesh Refinement (AMR) in simulating the Crustal Dynamics of Earth's Surface. AMR simultaneously improves solution quality, time to solution, and computer memory requirements when compared to generating/running on a globally fine mesh. The use of AMR in simulating the dynamics of the Earth's Surface is spurred by future proposed NASA missions, such as InSAR for Earth surface deformation and other measurements. These missions will require support for large-scale adaptive numerical methods using AMR to model observations. AMR was chosen because it has been successful in computation fluid dynamics for predictive simulation of complex flows around complex structures.

GeoFEST↗
NASA NTRS2001

Crustal Displacements Due to Continental Water Loading

The effects of long-wavelength (> 100 km), seasonal variability in continental water storage on vertical crustal motions are assessed. The modeled vertical displacements (delta-r(sub M)) have root-mean-square (RMS) values for 1994-1998 as large as 8 mm with ranges up to 30 mm, and are predominantly annual in character. Regional strains are on the order of 20 nanostrain for tilt and 5 nanostrain for horizontal deformation. We compare delta-r(sub M) with observed Global Positioning System (GPS) heights (delta-r(sub O)) (which include adjustments to remove estimated effects of atmospheric pressure and annual tidal and non-tidal ocean loading) for 147 globally distributed sites. When the delta-r(sub O) time series are adjusted by delta-r(sub M), their variances are reduced, on average, by an amount equal to the variance of the delta-r(sub M). Of the delta-r(sub O) time series exhibiting a strong annual signal, more than half are found to have an annual harmonic that is in phase and of comparable amplitude with the annual harmonic in the delta-r(sub M). The delta-r(sub M) time series exhibit long-period variations that could be mistaken for secular tectonic trends or post-glacial rebound when observed over a time span of a few years.

vanDam, T.↗
NASA NTRS1972

Geomagnetic field distortions and their effects on radiation belt particles.

One of the quadrupole terms in the main geomagnetic field is found to contribute to a north-south 'shear distortion' of the particle-drift shells, whereas one of the octupole components causes a longitude-dependent radial deformation and associated 'drift-shell splitting.' The collective action of all higher multipoles on trapped-particle motion is then used to analyze the 'true' anomalies or distortions of the internal geomagnetic field that are independent of the quadrupole-related eccentricity of the main dipole. These 'true' anomalies must originate in upper-mantle or crustal perturbations that lie relatively near the earth's surface on both sides of the mid-Atlantic ridge; they influence trapped-particle drift shells only where the latter have their closest approach to the earth (South Atlantic and South African areas). The quadrupole and octupole perturbations, on the other hand, obviously originate deep in the earth's core. In the final part of this review, we discuss the effects of external magnetospheric currents. A time-dependent symmetric ring current causes drift shells to be displaced radially, with associated particle acceleration; magnetopause currents introduce a day-night asymmetry, causing shell splitting.

Roederer, J. G.↗
NASA NTRS1996

Transient Creep of a Composite Lower Crust: Constitutive Theory - 1

A composite model is proposed to describe the time-dependent response of the Earth's lower crust. The motivation for such it model is twofold: First, new observations of widespread postseismic deformation indicate that the deep continental crust responds viscoelastically, having both long-and short-term decay times. Second, by any number of observationally based rationales, the lower crust is compositionally and structurally heterogeneous over many length scales. For heterogeneities that have much smaller characteristic lengths than the minimum deformation wavelength of interest, the aggregate rheology can be described by composite media theory. For wavelengths of the order of the thickness of the lower crust (approx. = 25-40 km) and larger, composite theory may be applied to heterogeneities that are smaller than about several hundred meters, or equivalent to the vertical extent of a thick lower crustal mylonitic shear zone. The composite media theory developed here is constructed using both Eshelhy-Mori-Tanaka theory for aligned generalized spheroidal inclusions and a generalized self-consistent method. The inclusions and matrix are considered to be Maxwellian viscoelastic: a rheology that is consistent with past homogeneous models of postseismic stress relaxation. The composite theory presented here introduces a transient response to a suddenly imposed stress field which does not appear in homogeneous Maxwell models. Analytic expressions for the amplitude and duration of the transient and for the effective long-and short-term viscosities of the composite are given which describe the sensitivity to inclusion concentration (phi), to shape, and to ratio of inclusion-to-matrix viscosity (R).

Ivins, Erik R.↗
NASA NTRS1994

Neotectonics of Asia: Thin-shell finite-element models with faults

As India pushed into and beneath the south margin of Asia in Cenozoic time, it added a great volume of crust, which may have been (1) emplaced locally beneath Tibet, (2) distributed as regional crustal thickening of Asia, (3) converted to mantle eclogite by high-pressure metamorphism, or (4) extruded eastward to increase the area of Asia. The amount of eastward extrusion is especially controversial: plane-stress computer models of finite strain in a continuum lithosphere show minimal escape, while laboratory and theoretical plane-strain models of finite strain in a faulted lithosphere show escape as the dominant mode. We suggest computing the present (or neo)tectonics by use of the known fault network and available data on fault activity, geodesy, and stress to select the best model. We apply a new thin-shell method which can represent a faulted lithosphere of realistic rheology on a sphere, and provided predictions of present velocities, fault slip rates, and stresses for various trial rheologies and boundary conditions. To minimize artificial boundaries, the models include all of Asia east of 40 deg E and span 100 deg on the globe. The primary unknowns are the friction coefficient of faults within Asia and the amounts of shear traction applied to Asia in the Himalayan and oceanic subduction zones at its margins. Data on Quaternary fault activity prove to be most useful in rating the models. Best results are obtained with a very low fault friction of 0.085. This major heterogeneity shows that unfaulted continum models cannot be expected to give accurate simulations of the orogeny. But, even with such weak faults, only a fraction of the internal deformation is expressed as fault slip; this means that rigid microplate models cannot represent the kinematics either. A universal feature of the better models is that eastern China and southeast Asia flow rapidly eastward with respect to Siberia. The rate of escape is very sensitive to the level of shear traction in the Pacific subduction zones, which is below 6 MPa. Because this flow occurs across a wide range of latitudes, the net eastward escape is greater than the rate of crustal addition in the Himalaya. The crustal budget is balanced by extension and thinning, primarily within the Tibetan plateau and the Baikal rift. The low level of deviation stresses in the best models suggests that topographic stress plays a major role in the orogeny; thus, we have to expect that different topography in the past may have been linked with fundamentally different modes of continental collision.

Kong, Xianghong↗
NASA NTRS1996

Tessera Terrain on Venus: A Survey of the Global Distribution, Characteristics, and Relation to Surrounding Units from Magellan Data

The tessera terrain on Venus, comprised of areas of high radar backscatter, complex deformation patterns relative to other units, and topography standing higher than surrounding plains, covers approximately 35.33 x 10(exp 6)sq km, about 8% of the surface of Venus, and is nonrandomly distributed, being preferentially located at equatorial and higher northern latitudes with a distinct paucity below about 30degS. Individual tessera occurrences range in area from the lower limits of our measurements (about 200 sq km) up to the largest tessera, Ovda, with an area of about 8.6 x 10(exp 6)sq km, or about 2% of the surface area of Venus. The size-frequency distribution of tessera patches is strongly unimodal and skewed toward smaller sizes, reflecting the great abundance of small tessera fragments. Modes of occurrence include (1) large clusters (e.g., Aphrodite Terra and Ishtar Terra); (2) arc-like segments which may extend for thousands of kilometers and are either concave inward toward the major tessera cluster development or away from it; (3) areas where tesserae are rare or absent which occur both as low-lying plains (e.g., Guinevere Planitia), and as elevated regions (e.g., Ata Regio). Tessera terrain has a bimodal elevation-frequency distribution, with the main peak at about 0- 1 km and an additional peak at about 3 km above mean planetary radius. In terms of number of occurrences, however, tesserae do not display a correlation with elevation at the global scale, since small tessera patches commonly occupy low-lying regions. Although tessera exhibit a range of gravity signatures, many occurrences are interpreted to represent relatively shallow (crustal) levels of compensation. Tessera boundaries include Type I (sinuous/embayed, dominated by adjacent lava plains embaying tessera massifs; 73% of total tesserae boundaries) and Type II (linear/tectonic). Only a small percentage of the length of all boundary types show no lava embayment and could be interpreted as tectonically active for long periods subsequent to initial tessera formation. Occurrence of broad slopes of post-tessem embayed plains away from tessera boundaries suggests that regional tilting occurred subsequent to final temra deformation in some places.

Ivanov, Mikhail↗
NASA NTRS1989

Tests of crustal divergence models for Aphrodite Terra, Venus

This paper discusses the characteristics of Aphrodite Terra, the highland region of Venus which is considered to be a likely site of mantle upwelling, active volcanism, and extensional tectonics, and examines the relation of these features to three alternative kinematic models for the interaction of mantle convection with the surface. These the 'vertical tectonics' model, in which little horizontal surface displacement results from mantle flow; the 'plate divergence' model, in which shear strain from large horizontal displacements is accommodated only in narrow zones of deformation; and the 'distributed deformation' model, in which strain from large horizontal motions is broadly accommodated. No convincing observational evidence was found to support the rigid-plate divergence, while the evidence of large-scale horizontal motions of Aphrodite argues against purely vertical tectonics. A model is proposed, involving a broad disruption of a thin lithosphere. In such a model, lineaments are considered to be surface manifestations of mantle convective flow.

Grimm, Robert E.↗
NASA NTRS1985

Heat flow increase following the rise of mantle isotherms and crustal thinning

Heat flow measurements in the western United States define a zone of high heat flow which coincides with the Basin and Range Province where extension has taken place recently. In this region, the average reduced heat flow is approx 30 mW sq. meters higher than in stable continental provinces; locally (e.g., Battle Mountain High), the heat flow anomaly can be more than 100 mW/sq meters above average. Estimates of the amount of extension range between 30% and 100% for the past 30 Ma. In the Colorado Plateau, which has been uplifted without major tectonic deformation, the heat flow is only slightly above average. Analytical calculations show that an abrupt change in heat flow at the base of the lithosphere 30 Ma ago would not affect the surface significantly. Uplift would proceed at a slow rate. A thermal perturbation at the base of a 40 km thick crust, however, would reach the surface faster and, after 30 Ma, the increase in surface heat flow would be about 75% of the amplitude of the heat flow anomaly. The number of volcanic rocks in the Basin and Range suggests that magma intrusions may provide an effective heat transfer mechanism. It can be show that if the source of the intrusions is at the base of the lithosphere, the response time will be much longer than 30 Ma, and most ot the heat transferred from the asthenosphere will be absorbed in the lithosphere.

Mareschal, J. C.↗
NASA NTRS1983

Ancient crustal components in the Fra Mauro breccias

Texturally pristine clasts preserve primary petrographic relationships and mineral compositions, yielding insights into igneous processes of the early lunar crust that cannot be gained from highly shocked and brecciated 'chemically pristine' samples. The use of texture as a prime criterion allows for expansion of the data base derived solely from chemical criteria, and provides complementary data. Texturally pristine clasts from the Apollo 14 site studied here include anorthosite, troctolites, gabbronorites, and basalts. Alkali anorthosites are plagioclase orthocumulates and may form by flotation in Mg-suite plutons. Ferroan anorthosite was cataclastically deformed and metamorphosed to granulite facies. Troctolites include both 01 + Plg and 01 + En + Plg cumulates. Major and trace element analyses of two troctolites reveal 'eastern' geochemical affinities that contrast other 'western' troctolites. Gabbronorites are Pig + Plg + or - Sp cumulates whose parent magmas may range from high-Al to intermediate-Ti mare basalt. At least three varieties of mare basalt are found at Apollo 14: high-Al, low-Ti; low-Al, intermediate-Ti; and low-Al, Ti VHK basalt. VHK (Very High Potassium) basalt is a new variety indigenous to Apollo 14.

Shervais, J. W.↗
NASA NTRS1988

Significance of elevated K/Rb ratios in lower crustal rocks

The granulite uncertainty principle, which states that it is difficult or impossible to determine with certainty the maximum geopressure and geotemperature that a granulite has experienced, is addressed. Also, geochemical fingerprinting cannot always be used reliably in the nebulous region that is transitional between metamorphic and igneous environments. Ion exchange thermometers are typically useful to approximately 800 C in slowly cooled plutonic rocks unless one uses a reintegration technique on unmixed minerals, or unless a metastable mineral assemblage can be observed. It is argued that in most granulites, fossil temperatures are typically obliterated by reequilibration and/or deformation during slow cooling. Granulite metamorphism may be further complicated by the common association with igneous activity. The previously-used geochemical indicators such as high K/Rb ratios and LIL depletion may not be strictly the result of granulite facies metamorphic depletion, but also may result from igneous processes, which depend on bulk and mineral compositions and on the mineralogy of the protolith. Detailed geologic mapping will be the ultimate arbitrator of whether a given geochemical signature is the result of igneous or metamorphic processes.

Frost, B. Ronald↗
NASA NTRS1988

Metasediments of the deep crustal section of Southern Karnataka

A review of the rocks of supracrustal origin in the amphibolite and granulite facies terrane in southern Karnataka was presented. In addition to introducing the metasediments in the field area of the workshop, a review was presented of the common occurrence of metasediments in amphibolite and granulite facies rocks worldwide. Models of granulite metamorphism must include a mechanism for the burial of these sediments to the depths recorded by the geobarometers in granulite metamorphism in addition to their reexposure at the surface. Unfortunately, the common occurrence of supracrustals in granulite facies rocks, sometimes with remarkably little deformation was deemed significant.

Devaraju, T. C.↗
DOE OSTI2024

Geodetic Evidence for Distributed Shear Below the Brittle Crust of the Walker Lane, Western United States

Abstract Models of active deformation of the Earth's crust are predominantly represented with dislocations having a downdip continuation into the lower crust, where the fault slips continuously. This model predicts surface strain accumulation concentrated near the fault during the interseismic period. In an alternative model, faults do not extend beneath the elastic portion of the crust and are accompanied by a wide zone of distributed shear underneath, predicting a more constant strain rate lacking concentrations at the faults. We use high‐precision GPS data collected across the northern and central Walker Lane, USA— a region of complex faulting near the western edge of the Basin and Range Province to evaluate which model is appropriate. Despite the existence of dense continuous and semi‐continuous geodetic networks that have been surveyed for ∼20 years, the horizontal velocities reveal no evidence of localized strain accumulation across the fault surface expressions. Instead, deformation within the Walker Lane is uniformly linear, suggesting that the surface deformation reflects distributed shear within the ductile crust rather than focused deformation at faults. This suggests no downdip extension of the faults below the seismogenic layer. The shear zone is 172 ± 6 km wide in the northernmost Walker Lane narrowing to 116 ± 4 km in the central Walker Lane. The total velocity budget across the shear zone is 7.2 ± 0.1 mm/yr in the north, increasing to 10.1 ± 0.1 mm/yr in the central Walker Lane. We conclude that assuming the presence of lower crustal dislocations when estimating geodetic faults slip rates may be inappropriate.

Geochemistry & Geophysics↗
NASA NTRS1992

Venus steep-sided domes: Relationships between geological associations and possible petrogenetic models

Venus domes are characterized by steep sides, a circular shape, and a relatively flat summit area. In addition, they are orders of magnitude larger in volume and have a lower height/diameter ratio than terrestrial silicic lava domes. The morphology of the domes is consistent with formation by lava with a high apparent viscosity. Twenty percent of the domes are located in or near tessera (highly deformed highlands), while most other (62 percent) are located in and near coronae (circular deformational features thought to represent local mantle upwelling). These geological associations provide evidence for mechanisms of petrogenesis and several of these models are found to be plausible: remelting of basaltic or evolved crust, differentiation of basaltic melts, and volatile enhancement and eruption of basaltic foams. Hess and Head have shown that the full range of magma compositions existing on the Earth is plausible under various environmental conditions on Venus. Most of the Venera and Vego lander compostional data are consistent with tholeiitic basalt; however, evidence for evolved magmas was provided by Venera 8 data consistent with a quartz monzonite composition. Pieters et al. have examined the color of the Venus surface from Venera lander images and interpret the surface there to be oxidized. Preliminary modeling of dome growth has provided some interpretations of lava rheology. Viscosity values obtained from these models range from 10(exp 14) - 10(exp 17) pa*s, and the yield strength has been calculated to be between 10(exp 4) and 10(exp 6) Pa, consistent with terrestrial silicic rocks. The apparent high viscosity of the dome lavas suggests that the domes have a silicic composition or must augment their viscosity with increased visicularity or crystal content. Sixty-two percent of the Venus domes are associated with coronae, circular features that have been proposed as sites of mantle upwelling, and 20 percent of the domes are located near tessera, relatively high areas of complex deformed terrain. We have investigated several models that are consistent with these geologic associations. The first case involves the differentiation of basalt in a magma reservoir in the crust, perhaps produced by partial melting within a mantle plume. The second case is melting at the base of thickened basaltic crust, and the final case is volatile exsolution and enhancement within a basaltic magma reservoir. The association of domes with tessera might be explained by crustal remelting, while the association with coronae may be consistent with chemical differentiation of a magma reservoir or the exsolution and concentration of volatiles in the reservoir before eruption.

Pavri, B.↗
NASA NTRS1974

Creep response of the lunar crust in mare regions from an analysis of crater deformation

The settling trends of 318 lunar mare craters are compared with predictions of numerical finite-element models in order to determine the creep response of the upper lunar mare crust. No settling is evident in craters smaller than 5 km in diameter. Settling rates of larger craters increase as function of crater size in a manner suggesting a nonlinear lunar creep response corresponding to the power law epsilon = 8.3 x 10 to the minus 34th sigma squared where epsilon is the strain rate and sigma is the differential stress. However, the observed nonlinearity is probably an apparent nonlinearity resulting from the temperature-induced viscosity decrease with depth due to a lunar crustal temperature gradient of 3 C/km and a creep activation energy of 20 kcal/mole. It is concluded that creep in the lunar medium is essentially Newtonian, and that the effective viscosity of the upper lunar mare is (1.6 plus or minus 0.3) x 10 to the 25th poise.

Kunze, A. W. G.↗
DOE OSTI2025

Towards machine-learning a fully-coupled constitutive model for thermal-hydraulic fracture in geothermal systems: phase I (Final Report)

This project, entitled “Towards machine-learning a fully-coupled constitutive model for thermal-hydraulic fracture in geothermal systems: phase I,” addresses challenges in understanding and controlling subsurface fracture networks, which are crucial for applications like deep geothermal heat mining and deep-crustal minerals/metals/hydrogen extraction. The research focuses on advancing the understanding of coupled thermal-hydro-mechanical-chemical (THMC) processes in geologic materials, particularly under the high temperature and pressure conditions found in the deep crust. This seed grant focused specifically on thermal cracking and the development of new constitutive models. Significant progress was made in both experimental and theoretical domains. To study micro-scale fracture formation, the project demonstrated the ability to create thermal cracking under stress in granite samples using a Paterson Gas-medium Deformation Apparatus.

15 GEOTHERMAL ENERGY↗
NASA NTRS1989

Divergent plate boundary characteristics and crustal spreading in Aphrodite Terra, Venus - A test of some predictions

Predictions concerning the divergence and crustal spreading in the Western Aphrodite Region of Venus are tested using published results from Arecibo, Venera 15/16, and Pioneer Venus data. It is found that the northern middle to high latitudes are characterized by a young average age, that there is a trend in the total number of craters per unit area from high values in the north polar regions to low values toward the equator, and that there is evidence for a latitudinal distribution of tectonic features of different types, with extensional features common in equatorial regions and compressional deformation features common in the northern middle to high latitudes.

Head, James W.↗
NASA NTRS1988

Petrology and tectonic development of supracrustal sequence of Kerala Khondalite Belt, Southern India

The granulite terrain of southern India, of which the Kerala Khondalite belt (KKB) is a part, is unique in exposing crustal sections with arrested charnockite growth in different stages of transformation and in varied lithological association. The KKB with rocks of surficial origin and incipient charnockite development, poses several problems relating to the tectonics of burial of vast area and mechanisms involved in expelling initial H2O (causes of dryness) for granulite facies metamorphism. It is possible to infer the following sequence of events based on the field and laboratory studies: (1) derivation of protoliths of KKB from granitic uplands and deposition in fault bounded basin (cratonic rift); (2) subhorizontal deep burial of sediments; (3) intense deformation of infra and supracrustal rocks; (4) early granulite facies metamorphism predating F sub 2 - loss of primary structure in sediments and formation of charnockites from amphibole bearing gneisses and khondalites from pelites; (5) migmatisation and deformation of metasediments and gneisses; (6) second event of charnockite formation probably aided by internal CO2 build-up; and (7) isothermal uplift, entrapment of late CO2 and mixed CO2-H2O fluids, formation of second generation cordierites and cordierite symplectites.

Kumar, G. R. Ravindra↗