Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “coronal density”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Theoretical quantification of shock-timing sensitivities for direct-drive inertial confinement fusion implosions on OMEGA

Using temporally shaped laser pulses, multiple shocks can be launched in direct-drive inertial confinement fusion implosion experiments to set the shell on a desired isentrope or adiabat. The velocity of the first shock and the times at which subsequent shocks catch up to it are measured through the VISAR diagnostic on OMEGA. Simulations reproduce these velocity and shock-merger time measurements when using laser pulses designed for setting mid-adiabat (α ~ 3) implosions, but agreement degrades for lower-adiabat (α ~ 1) designs. Several possibilities for this difference are studied: errors in placing the target at the center of irradiation (target offset), variations in energy between the different incident beams (power imbalance), and errors in modeling the laser energy coupled into the capsule. Simulation results indicate that shock timing is most sensitive to details of the density and temperature profiles in the coronal plasma, which influences the laser energy coupled into the target, and only marginally sensitive to target offset and beam power imbalance. A new technique under development to infer coronal profiles using x-ray self-emission imaging can be applied to the pulse shapes used in shock-timing experiments. In conclusion, this will help identify improved physics models to implement in codes and consequently enhance shock-timing predictive capability for low-adiabat pulses.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

New results and techniques in space radio astronomy.

The methods and results of early space radioastronomy experiments are reviewed, with emphasis on the RAE 1 spacecraft which was designed specifically and exclusively for radio astronomical studies. The RAE 1 carries two gravity-gradient-stabilized 229-m traveling-wave V-antennas, a 37-m dipole antenna, and a number of radiometer systems to provide measurements over the 0.2 to 9.2 MHz frequency range with a time resolution of 0.5 sec and an absolute accuracy of plus or minus 25%. Observations of solar bursts at frequencies down to 0.2 MHz provide new information on the density, plasma velocity, and dynamics of coronal streamers out to distances greater than 50 solar radii. New information on the distribution of the ionized component of the interstellar medium is being obtained from galactic continuum background maps at frequencies around 4 MHz. Cosmic noise background spectra measured down to 0.5 MHz produce new estimates on the interstellar flux of cosmic rays, on magnetic fields in the galactic halo, and on distant extragalactic radio sources.

Alexander, J. K.↗

Relativistic electrons and whistlers in Jupiter's magnetosphere

The paper examines some of the consequences of relativistic electrons in stably trapped equilibrium with parallel propagating whistlers in the inner magnetosphere of Jupiter. Approximate scaling laws for the stably trapped electron flux and equilibrium wave intensity are derived, and the equatorial growth rate for whistlers is determined. It is shown that fluxes are near the stably trapped limit, which suggests that whistler intensities may be high enough to cause significant diffusion of electrons, accounting for the observed reduction of phase space densities.

Barbosa, D. D.↗

Interplanetary propagation of flare-associated energetic particles

The basic propagation process of flare-associated energetic particles in interplanetary space is studied on the basis of a model which combines a Gaussian coronal injection profile and interplanetary particle densities found by a theory of focused diffusion. The model is used to describe 30 electron and proton events which originate from the western hemisphere of the sun. A comparison of calculated and observed density profiles shows that the scattering mean free path is 0.1-0.3 AU for 4-80 MeV protons. The value is two or three times smaller for 0.5-1.1 and 3-12 MeV electrons. Thus the scattering mean free path is only slightly rigidity-dependent, contrary to that predicted by the quasi-linear theory of pitch-angle scattering. The rms width is found to be less than an hour for most proton and electron events. This width, which decreases with velocity, is not rigidity-dependent.

Ma Sung, L. S.↗

Density sensitivity of the solar EUV emission from boron-like ions

The paper investigated the level populations and the line emission arising from ions of the boron isoelectronic sequence from C II to Ca XVI. It is found that, under conditions present in the solar corona, some of these ions have pairs of emission lines having intensity ratios which are density-sensitive. The boron-like lines observed in the solar spectrum between 300 and 1350 A are analyzed, and densities for quiet and active regions, coronal holes, sunspots, and flares are derived. Some aspects of the differences in the behavior of the emission from the lithium and boron sequences are also discussed.

Vernazza, J. E.↗

VLA observations of solar active regions at closely spaced frequencies - Evidence for thermal cyclotron line emission

VLA observations of a solar active region at 10 closely spaced frequencies between 1440 and 1720 MHz are presented. The synthesis maps show, on two successive days, significant changes in the brightness temperature within this narrow frequency range. It is shown that these changes cannot be due to either thermal bremsstrahlung or gyroresonance emission from a coronal loop in wich the temperature, density, or magnetic field varies monotonically with height. Instead, the brightness spectrum is attributed to cyclotron line emission from a narrow layer, where the temperature is elevated above the surrounding part of the loop.

Willson, R. F.↗

Propagating shocks in the corona

High resolution observations performed with the Decimeter spectrograph and the multichannel receiver at Nancay were analyzed in the range of 25-75 MHz. Sixty Type II bursts were selected. In this frequency range, type II events are generally associated with other radio emissions (such as storms of type III-U-I bursts); they are preceeded or followed by groups of U-bursts. One third of type II events show a nonuniform frequency drift, usually a steep decrease followed by an abrupt increase. This phenomenon can be explained by the propagation of an extended disturbance through the ambient corona when the density gradient is enhanced. An empirical coronal model is proposed to interpret these observations. The observations at fixed frequency of Type II bursts including fundamental and harmonic components are analyzed. It is shown that the spectrum of the intensity fluctuations differs with the fundamental and the harmonic components. The origin of these differences is discussed.

Leblanc, Yolanda↗

A radiating one-dimensional current sheet configuration

The structure of the x-independent (one-dimensional) forced current sheet including a self consistent By component is investigated for the case of small normal field component, Bz/B0 much less than 1. A hybrid (kinetic ions, massless fluid electrons) simulation model is used to demonstrate that such a current sheet has a time-dependent structure which radiates incompressible Alfven waves with amplitude of the order of the asymptotic (lobe) field strength B0. The central density enhancement acts as the source of a propagating wavetrain in which Bx rotates into By and back again. One of the characteristic signatures of the radiating current sheet is the presence of a reversal in Bx (or By) without a corresponding increase in density.

Pritchett, P. L.↗

Evolution of the coronal and transition-zone plasma in a compact flare - The event of 1973 August 9

X-ray and extreme ultraviolet observations of a compact flare were analyzed to determine the relative importance of radiation, thermal conduction, and 'evaporation' in the evolution of the temperature and density structure of the plasma. In the event studied (1973 August 9), the electron density was relatively high (5 x 10 to the eleventh to 1 x 10 to the twelfth) and radiation was evidently an important energy-loss and cooling mechanism. The light curves of ultraviolet lines formed at temperatures between 10 to the fifth to 10 to the seventh K indicate a time-varying emission measure gradient, and hence temperature gradient, during the flare. Radiative instability evidently played an important role in determining the steepness of these gradients during the rise and fall phases, and caused strong downward motions of material during the cooling phase. Toward the end of the event, the coronal electron density decreased and the temperature gradient relaxed toward that expected from a conduction-dominated plasma. For this flare, evaporative cooling did not appear to be a significant factor.

Underwood, J. H.↗

Multispectral Emission of the Sun during the First Whole Sun Month: Magnetohydrodynamic Simulations

We demonstrate that a three-dimensional magnetohydrodynamic (MHD) simulation of the corona can model its global plasma density and temperature structure with sufficient accuracy to reproduce many of the multispectral properties of the corona observed in extreme ultraviolet (EW) and X-ray emission. The key ingredient to this new type of global MHD model is the inclusion of energy transport processes (coronal heating, anisotropic thermal conduction, and radiative losses) in the energy equation. The calculation of these processes has previously been confined to one-dimensional loop models, idealized two-dimensional computations, and three-dimensional active region models. We refer to this as the thermodynamic MHD model, and we apply it to the time period of Carrington rotation 1913 (1996 August 22 to September 18). The form of the coronal heating term strongly affects the plasma density and temperature of the solutions. We perform our calculation for three different empirical heating models: (1) a heating function exponentially decreasing in radius; (2) the model of Schrijver et al.; and (3) a model reproducing the heating properties of the quiet Sun and active regions. We produce synthetic emission images from the density and temperature calculated with these three heating functions and quantitatively compare them with observations from E W Imaging Telescope on the Solar and Heliospheric Observatory and the soft X-ray telescope on Yohkoh. Although none of the heating models provide a perfect match, heating models 2 and 3 provide a reasonable match to the observations.

Lionello, Roberto↗

Investigation of the Electron Density Variation During the 21 August 2017 Solar Eclipse

Abstract This paper presents a comparison of modeled and measured electron densities for the 21 August 2017 solar eclipse across the USA. The location of the instrument was (43.81°N, 247.32°E) where the maximum obscuration of 99.6% occurred at 17.53 hr UT on 21 August. The solar apparent time was 9.96 hr, and the duration of the eclipse was 2.7 hr. It was found that if it is assumed that there are no chromosphere emissions at totality, ~30% coronal emission remaining at totality gave the best fit to the electron density variation at 150 km. The 30% coronal emission estimate has uncertainties associated with respect to uncertainties in the solar spectrum, the measured electron density, and the amount of chromosphere emissions remaining at totality. The agreement between the modeled and measured electron densities is excellent at 150 km with the assumed 30% coronal emission at totality. At other altitudes, the agreement is very good, but the altitude profile would be improved if the model peak electron density ( N m F 2 ) decayed more slowly to better match the data. The minimum N m F 2 in the model occurs ~10 min after totality when it decreases to 0.55 from its noneclipse value. The minimum of the N m F 2 data occurs between 6 and 10 min after totality but is ~15% larger. The total electron content decreases to 0.65 of its preeclipse value. These relative changes agree well with those predicted by others prior to the eclipse.

Reinisch, B. W.↗

Resonance absorption of propagating fast waves in a cold plasma

Absorption of propagating waves impinging on a surface in which the plasma and magnetic field may change is investigated by examining in depth the problem of a combination of cold plasma, uniform magnetic field and a surface density which varies linearly from zero at the left end to some finite value at the right end, beyond which the density is constant. Two cases are considered: one in which the plasma is a vacuum everywhere to the left of the surface (which may correspond to coronal conditions) and one in which the plasma density jumps to a very large value to the left of the surface (which may mimic the magnetosphere with the dense region at the left corresponding to the plasmasphere). A complete discussion of the resonance absorption of propagating fast waves for the case considered by Kiveloson and Southwood (1986) is presented, emphasizing approximate analytical results whenever possible; these results are then compared with exact numerical solutions.

Hollweg, Joseph V.↗

MHD Modelling of Coronal Loops: Injection of High-Speed Chromospheric Flows

Context. Observations reveal a correspondence between chromospheric type II spicules and bright upward-moving fronts in the corona observed in the extreme-ultraviolet (EUV) band. However, theoretical considerations suggest that these flows are probably not the main source of heating in coronal magnetic loops. Aims. We investigate the propagation of high-speed chromospheric flows into coronal magnetic flux tubes and the possible production of emission in the EUV band. Methods. We simulated the propagation of a dense 104 K chromospheric jet upward along a coronal loop by means of a 2D cylindrical MHD model that includes gravity, radiative losses, thermal conduction, and magnetic induction. The jet propagates in a complete atmosphere including the chromosphere and a tenuous cool (approximately 0.8 MK) corona, linked through a steep transition region. In our reference model, the jet initial speed is 70 km per second, its initial density is 10(exp 11) per cubic centimeter, and the ambient uniform magnetic field is 10 G. We also explored other values of jet speed and density in 1D and different magnetic field values in 2D, as well as the jet propagation in a hotter (approximately 1.5 MK) background loop. Results. While the initial speed of the jet does not allow it to reach the loop apex, a hot shock-front develops ahead of it and travels to the other extreme of the loop. The shock front compresses the coronal plasma and heats it to about 10(exp 6) K. As a result, a bright moving front becomes visible in the 171 Angstrom channel of the SDO/AIA mission. This result generally applies to all the other explored cases, except for the propagation in the hotter loop. Conclusions. For a cool, low-density initial coronal loop, the post-shock plasma ahead of upward chromospheric flows might explain at least part of the observed correspondence between type II spicules and EUV emission excess.

Sun: chromosphere↗

Nonequilibrium ionization in solar and stellar winds

Substantial and systematic departures from ionization equilibrium can occur in the solar transition region and corona when mass outflows are present. Modeling calculations illustrate the general characteristics of the ionization balance in such regions. The presence of nonequilibrium conditions suggests a natural explanation for the extended region of EUV line emission that is observed above the solar limb. Comparison with observations of a coronal hole on the disk indicates that outflow may not start until temperatures of about 250,000 K are reached. Additional consequences include a diminution of the density discrepancy between ultraviolet and radio observations of coronal holes, and potential effects on the energy balance in solar and stellar atmospheres undergoing mass loss.

Dupree, A. K.↗

White Light Coronograph (WLC) and Ultra-Violet Coronal Spectrometer (UVCS)

The white light coronagraph (WLC) and ultraviolet coronal spectrometer (UVCS) together reveal the corona and the roots of the solar wind from 1.5 to 6 solar radii from Sun center. The WLC measures the plasma density and spatial structure of the corona and coronal mass ejections at a resolution of about 20 arcseconds. The UVCS, in combination with the WLC, measures the temperature and radial outflow speed of the coronal plasma. These instruments will detect mass ejections from active regions and high speed solar wind streams from coronal holes a few days before the source regions rotate onto the face of the Sun, thus giving a week or more of advanced warning for disturbed geomagnetic conditions at Earth.

Moore, R. L.↗

Study of the mechanism for solar wind formation

Observations of the corona and solar wind are analyzed and compared with generalized results derived from laboratory-scale experiments. It was shown that a thermal pressure gradient can make a major contribution to a precipitating plasma of the solar wind emanating from coronal holes. It is found that the divergence Phi = (R/R sub solar radius)f of the magnetic field lines, originating from coronal holes, is one of the factors governing solar wind velocity at Earth orbit (R= 1 AU). A decrease in the velocity V sub R = 1 AU from approx = 750 mk/sec down to approx = 450 km/sec may be attributable to an increase in superradial divergence f from approx = 7-9 to 20. The plasma energy flux density F at the base of the coronal holes representing the sources of the solar wind with V sub R=1AE = (450 to 750) km/sec, remains nearly constant, being F approx = (1.4 +/- 0.3) x 10 to the 6th power x ergs/sq cm/sec for the period 1973-1975.

Eselevich, V. G.↗

THE TEMPERATURE AND DENSITY STRUCTURE OF THE SOLAR CORONA. I. OBSERVATIONS OF THE QUIET SUN WITH THE EUV IMAGING SPECTROMETER ON HINODE

Measurements of the temperature and density structure of the solar corona provide critical constraints on theories of coronal heating. Unfortunately, the complexity of the solar atmosphere, observational uncertainties, and the limitations of current atomic calculations, particularly those for Fe, all conspire to make this task very difficult. A critical assessment of plasma diagnostics in the corona is essential to making progress on the coronal heating problem. In this paper, we present an analysis of temperature and density measurements above the limb in the quiet corona using new observations from the EUV Imaging Spectrometer (EIS) on Hinode. By comparing the Si and Fe emission observed with EIS we are able to identify emission lines that yield consistent emission measure distributions. With these data we find that the distribution of temperatures in the quiet corona above the limb is strongly peaked near 1 MK, consistent with previous studies. We also find, however, that there is a tail in the emission measure distribution that extends to higher temperatures. EIS density measurements from several density sensitive line ratios are found to be generally consistent with each other and with previous measurements in the quiet corona. Our analysis, however, also indicates that a significant fraction of the weaker emission lines observed in the EIS wavelength ranges cannot be understood with current atomic data.

99 GENERAL AND MISCELLANEOUS↗