Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “collective variables”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Biomechanical Modeling Analysis of Loads Configuration for Squat Exercise

INTRODUCTION: Long duration space travel will expose astronauts to extended periods of reduced gravity. Since gravity is not present to assist loading, astronauts will use resistive and aerobic exercise regimes for the duration of the space flight to minimize loss of bone density, muscle mass and aerobic capacity that occurs during exposure to a reduced gravity environment. Unlike the International Space Station (ISS), the area available for an exercise device in the next generation of spacecraft for travel to the Moon or to Mars is limited and therefore compact resistance exercise device prototypes are being developed. The Advanced Resistive Exercise Device (ARED) currently on the ISS is being used as a benchmark for the functional performance of these new devices. Biomechanical data collection and computational modeling aid the device design process by quantifying the joint torques and the musculoskeletal forces that occur during exercises performed on the prototype devices. METHODS The computational models currently under development utilize the OpenSim [1] software platform, consisting of open source code for musculoskeletal modeling, using biomechanical input data from test subjects for estimation of muscle and joint loads. The OpenSim Full Body Model [2] is used for all analyses. The model incorporates simplified wrap surfaces, a new knee model and updated lower body muscle parameters derived from cadaver measurements and magnetic resonance imaging of young adults. The upper body uses torque actuators at the lumbar and extremity joints. The test subjects who volunteer for this study are instrumented with reflective markers for motion capture data collection while performing squat exercising on the Hybrid Ultimate Lifting Kit (HULK) prototype device (ZIN Technologies, Middleburg Heights, OH). Ground reaction force data is collected with force plates under the feet, and device loading is recorded through load cells internal to the HULK. Test variables include the applied device load and the dual cable long bar or single cable T-bar interface between the test subject and the device. Data is also obtained using free weights with the identical loading for a comparison to the resistively loaded exercise device trials. The data drives the OpenSim biomechanical model, which has been scaled to match the anthropometrics of the test subject, to calculate the body loads. RESULTS Lower body kinematics, joint moments, joint forces and muscle forces are obtained from the OpenSim biomechanical analysis of the squat exercises under different loading conditions. Preliminary results from the model for the loading conditions will be presented as will hypotheses developed for follow on work.

Human Factors Engineering↗

The Random Transiter – EPIC 249706694/HD 139139

We have identified a star, EPIC 249706694 (HD 139139), that was observed during K2 Campaign 15 with the Kepler extended mission that appears to exhibit 28 transit-like events over the course of the 87-day observation. The unusual aspect of these dips, all but two of which have depths of 200 ± 80 ppm, is that they exhibit no periodicity, and their arrival times could just as well have been produced by a random number generator. We show that no more than four of the events can be part of a periodic sequence. We have done a number of data quality tests to ascertain that these dips are of astrophysical origin, and while we cannot be absolutely certain that this is so, they have all the hallmarks of astrophysical variability on one of two possible host stars (a likely bound pair) in the photometric aperture. We explore a number of ideas for the origin of these dips, including actual planet transits due to multiple or dust emitting planets, anomalously large TTVs, S- and P-type transits in binary systems, a collection of dust-emitting asteroids, ‘dipper-star’ activity, and short-lived starspots. All transit scenarios that we have been able to conjure up appear to fail, while the intrinsic stellar variability hypothesis would be novel and untested.

S. Rappaport↗

Fitness variables and the lipid profile in United States astronauts

The study examines the relationship between several measures of fitness and the lipid profile in United States astronauts. Data were collected on 89 astronauts, previously selected (PSA) and newly selected (NSA), during their annual physical examinations. Several similarities were seen in the two groups. The PSA (mean age of 46.1) had a lower maximum oxygen capacity (41.7 ml kg/min vs. 47.5 ml kg/min); when adjusted for age, it was no different from the NSA (mean age 33.5). The PSA had similar body composition with 15.7% - lower than expected for age. The lipid profiles of the two groups were basically the same with the differences being a function of age. Compared to a normative population, the astronauts had similar cholesterols, lower triglycerides, and higher HDLs. The astronaut profiles were generally more favorable than the age-matched controls, which is felt to be a result of the self-supervised conditioning program and annual preventive medicine consultation and education.

Berry, M. A.↗

Initial Results from the Variable Intensity Sonic Boom Propagation Database

An extensive sonic boom propagation database with low- to normal-intensity booms (overpressures of 0.08 lbf/sq ft to 2.20 lbf/sq ft) was collected for propagation code validation, and initial results and flight research techniques are presented. Several arrays of microphones were used, including a 10 m tall tower to measure shock wave directionality and the effect of height above ground on acoustic level. A sailplane was employed to measure sonic booms above and within the atmospheric turbulent boundary layer, and the sailplane was positioned to intercept the shock waves between the supersonic airplane and the ground sensors. Sailplane and ground-level sonic boom recordings were used to generate atmospheric turbulence filter functions showing excellent agreement with ground measurements. The sonic boom prediction software PCBoom4 was employed as a preflight planning tool using preflight weather data. The measured data of shock wave directionality, arrival time, and overpressure gave excellent agreement with the PCBoom4-calculated results using the measured aircraft and atmospheric data as inputs. C-weighted acoustic levels generally decreased with increasing height above the ground. A-weighted and perceived levels usually were at a minimum for a height where the elevated microphone pressure rise time history was the straightest, which is a result of incident and ground-reflected shock waves interacting.

Haering, Edward A., Jr.↗

Enabling Reanalysis Research Using the Collaborative Reanalysis Technical Environment (CREATE)

Modern atmospheric and oceanic reanalysis are valuable assets for atmospheric research and climate monitoring (Kalnay et al. 1996). Now that most reanalysis records are more than 36 years long, the data have become more useful for climate modeling research (Dole et al. 2008). For investigators who need to use multiple reanalysis, a common challenge is that the data are distributed at various sites and often in different formats. The NASA CREATE system provides access to the data in one location in a standard format (one variable per file and standardized metadata in the CMIP5 style; see Table 1 for a list of the key acronyms used in this paper). The collection includes monthly and 6-hourly data from the seven major atmospheric reanalysis: CFSR (Saha et al. 2010), ERA-Interim (Dee et al. 2011), MERRA (Rienecker et al. 2011), MERRA-2 (Gelaro et al. 2017), JRA-25 (Onogi et al. 2007), JRA-55 (Kobayashi et al. 2014), and 20CRv2c (Compo et al. 2011). An ancillary portion of CREATE includes eight ocean reanalysis: NCEP CFSR, CMCC C-GLORSv5 (Storto et al. 2016), ECMWF ORAS4 (Balmaseda et al.2013), ECMWF ORAP5.0 (Zuo et al. 2015), University of Hamburg GECCO2 (Köhl 2015), GFDL ECDA (Zhang et al. 2007), NOAA GODAS (Saha et al. 2010), and MOVE/MRI.COM-G2i (Toyoda et al. 2016). The ocean state variables were similarly reformatted but were then also regridded onto a common horizontal and vertical grid. This approach facilitated the calculation of an ensemble average and spread that is also published alongside the native gridded data. A third reanalysis product is a global hourly 0.5° land surface air temperature dataset constructed by Wang and Zeng (2013). All three datasets are distributed through the ESGF in a format consistent with the CMIP style described by Cinquini et al. (2014).

Potter, Gerald L.↗

Geospatial Modeling of Asthma Population in Relation to Air Pollution

Current observations indicate that asthma is growing every year in the United States, specific reasons for this are not well understood. This study stems from an ongoing research effort to investigate the spatio-temporal behavior of asthma and its relatedness to air pollution. The association between environmental variables such as air quality and asthma related health issues over Mississippi State are investigated using Geographic Information Systems (GIS) tools and applications. Health data concerning asthma obtained from Mississippi State Department of Health (MSDH) for 9-year period of 2003-2011, and data of air pollutant concentrations (PM2.5) collected from USEPA web resources, and are analyzed geospatially to establish the impacts of air quality on human health specifically related to asthma. Disease mapping using geospatial techniques provides valuable insights into the spatial nature, variability, and association of asthma to air pollution. Asthma patient hospitalization data of Mississippi has been analyzed and mapped using quantitative Choropleth techniques in ArcGIS. Patients have been geocoded to their respective zip codes. Potential air pollutant sources of Interstate highways, Industries, and other land use data have been integrated in common geospatial platform to understand their adverse contribution on human health. Existing hospitals and emergency clinics are being injected into analysis to further understand their proximity and easy access to patient locations. At the current level of analysis and understanding, spatial distribution of Asthma is observed in the populations of Zip code regions in gulf coast, along the interstates of south, and in counties of Northeast Mississippi. It is also found that asthma is prevalent in most of the urban population. This GIS based project would be useful to make health risk assessment and provide information support to the administrators and decision makers for establishing satellite clinics in future.

Kethireddy, Swatantra R.↗

Seasonal variability of alongshore geostrophic velocity off central California

The seasonal variation of the alongshore geostropic velocity (AGV) (relative to 500 dbar) over the outer continental slope off Point Sur and Point Conception, California, is investigated statistically on the basis of hydrographic data collected in the California Cooperative Oceanic Fisheries Investigations from 1949 through 1981. Previous observations and theoretical models of the AGV features are reviewed, the data are characterized, and the results are presented graphically and compared with the model predictions. Both locations have coherent mainly annual flow above 100-m depth, north during October-January and south during February-September; below 100 m, the flow is semiannually variable and always northward (with December and June maxima) at Point Conception but annual (with northward maximum in December and weak southward flow from March to May) at Point Sur.

Chelton, D. B.↗

Pre-Aerosol, Clouds, and Ocean Ecosystem (PACE) Mission Science Definition Team Report: PACE Technical Report Series - Volume 2

We live in an era in which increasing climate variability is having measurable impact on marine ecosystems within our own lifespans. At the same time, an ever-growing human population requires increased access to and use of marine resources. To understand and be better prepared to respond to these challenges, we must expand our capabilities to investigate and monitor ecological and bio geo chemical processes in the oceans. In response to this imperative, the National Aeronautics and Space Administration (NASA) conceived the Pre-Aerosol, Clouds, and ocean Ecosystem (PACE) mission to provide new information for understanding the living ocean and for improving forecasts of Earth System variability. The PACE mission will achieve these objectives by making global ocean color measurements that are essential for understanding the carbon cycle and its inter-relationship with climate change, and by expanding our understanding about ocean ecology and biogeochemistry. PACE measurements will also extend ocean climate data records collected since the 1990s to document changes in the function of aquatic ecosystems as they respond to human activities and natural processes over short and long periods of time. These measurements are pivotal for differentiating natural variability from anthropogenic climate change effects and for understanding the interactions between these processes and various human uses of the ocean. PACE ocean science goals and measurement capabilities greatly exceed those of our heritage ocean color sensors, and are needed to address the many outstanding science questions developed by the oceanographic community over the past 40 years.

Cetinic, Ivona↗

The Mechanics of Atmospheric Systems Derived Through Vertical and Horizontal Analysis of Parametric Data

For 36 hours during April 1975, an atmospheric variability experiment was conducted. This research effort supported an observational program in which rawinsonde data, radar data, and satellite data were collected from a network of 42 stations east of the Rocky Mountains at intervals of 3 hours. This program presents data with a high degree of time resolution over a spatially and temporally extensive network. Reduction of the experiment data is intended primarily as a documentation of the checking and processing of the data and should be useful to prospective users. Various flow diagrams of the data processing procedures are described, and a complete summary of the formulas used in the data processing is provided. A wind computation scheme designed to extract as much detailed wind information as possible from the unique experiment data set is discussed. The accuracy of the thermodynamic and wind data were estimated. Errors in the thermodynamic and wind data are given.

Turner, R. E.↗

Electrodynamics of the middle atmosphere: Superpressure balloon program

In this experiment a comprehensive set of electrical parameters were measured during eight long duration flights in the southern hemisphere stratosphere. These flight resulted in the largest data set ever collected from the stratosphere. The stratosphere has never been electrodynamically sampled in the systematic manner before. New discoveries include short term variability in the planetary scale electric current system, the unexpected observation of stratospheric conductivity variations over thunderstorms and the observation of direct stratospheric conductivity variations following a relatively small solar flare. Major statistical studies were conducted of the large scale current systems, the stratospheric conductivity and the neutral gravity waves (from pressure and temperature data) using the entire data set.

Holzworth, Robert H.↗

Estimating the cost of mental loading in a bimodal divided-attention task: Combining reaction time, heart-rate variability and signal-detection theory

Multiple approaches are necessary for understanding and measuring workload. In particular, physiological systems identifiable by employing cardiac measures are related to cognitive systems. One issue of debate in measuring cardiac output is the grain of analysis used in recording and summarizing data. Various experiments are reviewed, the majority of which were directed at supporting or contradicting Lacey's intake-rejection hypothesis. Two of the experiments observed heart rate in operational environments and found virtually no changes associated with mental load. The major problems facing researchers using heart rate variability, or sinus arrhthmia, as a dependent measure have been associated with valid and sensitive scoring and preventing contamination of observed results by influences unrelated to cognition. Spectral analysis of heart rate variability offers two useful procedures: analysis from the time domain and analysis from the frequency domain. Most recently, data have been collected in a divided attention experiment, the performance measures and cardiac measures of which are detailed.

Casper, Patricia A.↗

NDE detectability of fatigue-type cracks in high-strength alloys: NDI reliability assessments

This program was conducted to generate quantitative flaw detection capability data for the nondestructive evaluation (NDE) techniques typically practiced by aerospace contractors. Inconel 718 and Haynes 188 alloy test specimens containing fatigue flaws with a wide distribution of sizes were used to assess the flaw detection capabilities at a number of contractor and government facilities. During this program 85 inspection sequences were completed presenting a total of 20,994 fatigue cracks to 53 different inspectors. The inspection sequences completed included 78 liquid penetrant, 4 eddy current, and 3 ultrasonic evaluations. The results of the assessment inspections are presented and discussed. In generating the flaw detection capability data base, procedures for data collection, data analysis, and specimen care and maintenance were developed, demonstrated, and validated. The data collection procedures and methods that evolved during this program for the measurement of flaw detection capabilities and the effects of inspection variables on performance are discussed. The Inconel 718 and Haynes 188 test specimens that were used in conducting this program and the NDE assessment procedures that were demonstrated, provide NASA with the capability to accurately assess the flaw detection capabilities of specific inspection procedures being applied or proposed for use on current and future fracture control hardware program.

Christner, Brent K.↗

Estimation of thermal flux and emissivity of the land surface from multispectral aircraft data

In order to evaluate the importance of surface thermal flux and emissivity variations on surface and boundary layer processes, a technique that uses thermal data from an airborne multispectral scanner to determine the surface skin temperature and thermal emissivity over a regional area has been developed. These values are used to estimate the total flux density emanating from the surface and at the top of the atmosphere. Data from the multispectral atmospheric mapping sensor (MAMS) collected during the First ISLSCP Field Experiment (FIFE) are used to develop the technique, and to show the time and space variability of the flux values. The ground truth data available during FIFE provide a unique resource to evaluate this technique.

Jedlovec, Gary J.↗

Future X-ray observations of 'normal' galaxies

The study of the X-ray properties of galaxies is discussed in terms of existing observational results and the capacity for interpreting the data. The NASA Einstein Observatory data is first examined to describe the X-ray properties of spiral and irregular galaxies as well as elliptical and SO galaxies. Issues that remain to be addressed can be explored by studying the X-ray properties of very luminous 'super-Eddington' sources, starburst galaxies, and different phases of the interstellar medium. The specific requirements are set forth for the observatories conducting the research; particular conditions are given for detecting galaxies, high-resolution studies of individual galaxies, bandwidth, spectral studies, and time-variability studies. An ideal X-ray telescope is described based on these conditions, the primary features of which are a collecting area greater than 100 sq m, a large bandwidth, and the capacity for both photometric and spectroscopic investigation.

Fabbiano, Giuseppina↗

Characterization and Evaluation of Acid Rain in East Central Florida from 1978 to 1995 and Evaluation of Some Chromatographic/Spectroscopic Results from Leachate Samples from CELSS

The results of monitoring the chemical composition of rain in east-central Florida have shown that the rain is moderately acid. The measured acidity of rain is less than that observed in other regions of the U. S., however, it does suggest that the level of acidity is substantial. The annual chemical composition of rain at UCF and at KSC has shown moderate variability. Extreme daily and monthly variations are observed, however these variations are not addressed here. The total ionic composition of rain collected at FL99 is greater than that for rain collected at UCF, however this can be accounted for by site proximity to the ocean with the accompanying marine influence. Difference in acidity data collected from the UCF and FL99 sites which are separated by 50 km may be due in part to the differences that have been observed between laboratory and field pH measurements. Trend assessment for precipitation composition requires evaluation of data that covers some minimum time period. In fact, the subdivision of the multi-year UCF record into individual 10 year records as described above can lead to the conclusion that a significant increase, a significant decrease or no trend exists for acidity depending upon the time period chosen for evaluation. Trend evaluation has also been accomplished by linear and nonlinear regression analysis using monthly volume weighted average concentrations and deposition using the UCF data set and some of the Florida NADP data set.

Madsen, Brooks C.↗

Advances in Understanding Decadal Climate Variability

Recently, a joint Brazil-France-U.S. program, known as PIRATA (Pilot Research moored Array in the Tropical Atlantic), was proposed to begin the deployment of moored measurement platforms in the tropical Atlantic in order to enhance the existing observational data base and subsequent understanding of the processes by which the ocean and atmosphere couple in key regions of the tropical Atlantic Ocean. Empirical studies have suggested that there are strong relationships between tropical Atlantic upper ocean variability, SST, ocean-atmosphere coupling and regional climate variability. During the early 1980's a coordinated set of surface wind, subsurface thermal structure, and subsurface current observations were obtained as part of the U.S.-France SEQUAL- FOCAL process experiment designed to observe the seasonal response of the tropical Atlantic Ocean to surface forcing. Since that time, however, the observational data base for the tropical Atlantic Ocean has disintegrated to a few shiptracks measuring ocean temperatures and a small collection of tide gauge stations measuring sea level. A more comprehensive set of observations, modeling and empirical studies is now in order to make progress on understanding the regional climate variability. The proposed PIRATA program will use mooring platforms similar to the tropical Pacific Ocean TAO array to measure surface fluxes of momentum and heat and the corresponding changes in the upper ocean thermal structure. It is anticipated that the oceanic data from this monitoring array will also be used in a predictive mode for initialization studies of regional coupled climate models. Of particular interest are zonal and meridional modes of ocean-atmosphere variability within the tropical Atlantic basin that have significant impacts on the regional climate of the bordering continents.

Busalaacchi, Antonio J.↗

Low Wind Speed Radar Backscatter Measurements at C- and Ku-Band Obtained During the Surface Wave Dynamics Experiment

Radar backscatter measurements collected at both C- and Ku-Band during the recent SurfaceWaves Dynamics Experiment (SWADE) on 1 March 1991 show dramatic variabilities of thenormalized radar cross section (sigma degree) of the ocean surface at low wind speed. Additionally,measurements of the sigma degree in the cross wind direction fluctuated much more than the sigmadegree in the upwind direction. The C- and Ku-band data are quite similar, both exhibiting a morepronounced roll off of sigma degree with decreasing neutral stability wind than indicated bypreviously published empirical model functions. The data show extremely large azimuthalmodulations, in some cases greater than 20 dB, and show good qualitative agreement with theazimuthal modulation predicted.

Carson, S. C.↗

A Climatology of Midlatitude Continental Clouds from the ARM SGP Central Facility: Cloud Fraction and Radiative Forcing - Part II

Data collected at the Department of Energy Atmospheric Radiation Measurement (ARM) Southern Great Plains (SGP) central facility are analyzed for determining the variability of cloud fraction and radiative forcing at several temporal scales between January 1997 and December 2002. Cloud fractions are estimated for total cloud cover and for single-layer low (0-3 km), middle (3-6 km), and high clouds (greater than 6 km) using ARM SGP ground-based paired lidar-radar measurements. Shortwave (SW), longwave (LW), and net cloud radiative forcings (CRF) are derived from up- and down-looking standard precision spectral pyranometers and precision infrared radiometer measurements. The annual averages of total, and single-layer, nonoverlapped low, middle and high cloud fractions are 0.49, 0.11, 0.03, and 0.17, respectively. Total and low cloud amounts were greatest from December through March and least during July and August. The monthly variation of high cloud amount is relatively small with a broad maximum from May to August. During winter, total cloud cover varies diurnally with a small amplitude, mid-morning maximum and early evening minimum, and during summer it changes by more than 0.14 over the daily cycle with a pronounced early evening minimum. The diurnal variations of mean single-layer cloud cover change with season and cloud height. Annual averages of all-sky, total, and single-layer high, middle, and low LW CRFs are 21.4, 40.2, 16.7, 27.2, and 55.0 Wm(sup -2), respectively; and their SW CRFs are -41.5, -77.2, -37.0, -47.0, and -90.5 Wm(sup -2). Their net CRFs range from -20 to -37 Wm(sup -2). For all-sky, total, and low clouds, the maximum negative net CRFs of -40.1, -70, and -69.5 Wm(sup -2), occur during April; while the respective minimum values of -3.9, -5.7, and -4.6 Wm(sup -2), are found during December. July is the month having maximum negative net CRF of -46.2 Wm(sup -2) for middle clouds, and May has the maximum value of -45.9 Wm(sup -2) for high clouds. An uncertainty analysis demonstrates that the calculated CRFs are not significantly affected by the difference between clear-sky and cloudy conditions. A more comprehensive cloud fraction study from both surface and satellite observations will follow.

Dong, Xiquan↗