Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “charging analysis”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Estimating the Diffusion Coefficient of Lithium in Graphite: Extremely Fast Charging and a Comparison of Data Analysis Techniques

Galvanostatic intermittent titration experiments were performed in three-electrode cells to characterize the effect of C/2, 2-C and 4-C charge rates on the observed lithium diffusion coefficient. As part of the data analysis process, we compared the classic Weppner-Huggins analysis of polarization data with a newer (Wang et al.) analysis method for depolarization data. At low values of x in Li x C 6 , both analysis methods showed the same general trend in the apparent lithium diffusion coefficient, 4-C > 2-C > C/2. The two techniques differed in the magnitude of the estimated diffusion coefficient by about a factor of 100. The observed increase in diffusion coefficient does not last over a large compositional range. Since the estimates from the method of Weppner and Huggins may contain artifacts due to the use of particulate electrodes and high charge rates, the method of Wang et al. may produce better values.

25 ENERGY STORAGE↗
DOE OSTI2019

Density functional theory study of the point defect energetics in y- LiAlO2, Li2ZrO3 and Li2TiO3 materials

The defect energetics in y-LiAlO2, Li2 TiO3, and Li2ZrO3 materials used in tritium-producing burnable absorber rods and fusion solid breeder applications was investigated using density functional theory calculations. A comprehensive analysis of the charged defects was performed for cation and anion vacancies, interstitials, antisite defects, and 3H interstitial and substitutional defects to understand the defect structures at different charge states and their stability as a function of the electron chemical potential across the electronic band gap of crystals at operating temperature and oxygen partial pressure conditions. Through investigation of the local bonding configurations and projected electronic density of states of the 3H related charged defects, including 3H interstitial (3Hint), 3Hint bound with an oxygen interstitial, and substitutional 3H defects on the Li, O, and M (M¼ Al, Ti, and Zr) sites (3HLi, 3HO, and 3HM), the 3H states of these defects were distinguished, i.e. triton (3Hþ), neutral 3H (3H0), and tritide (3H-). The two stable 3H related defects under the Li2O-LiOH rich condition at T ¼ 1000 K, between P(O2) ¼ 10^-5 and 10^-25 atm were found to be 3H interstitial (3Hint) with charge of þ1 and neutral 3HLi (substitutional 3H on the Li site) in g-LiAlO2, Li2ZrO3, and Li2TiO3 materials. For Li2TiO3, the stability of the 3HO with charge of þ1 and 3HM with charge of 3 becomes comparable to that of 3Hint atm at P(O2) ¼ 1025 atm. Overall, our results indicate the energy cost to form the stable 3H defect species (3Hint with charge of þ1 and neutral 3HLi) in g-LiAlO2 material are higher than those of Li2TiO3 and Li2ZrO3 materials at T ¼ 1000 K, between P(O2) ¼ 10^-5 and 10^-25 atm. Interactions between the point defects and the 3H species as a function of the electron chemical potential across the band gap of the materials were also examined. All the three materials exhibit strong interactions between the 3Hint and the O vacancy, Li vacancy, and O interstitial defects with the strongest interactions found in the case of y-LiAlO2 phase, indicating a higher tendency to trap 3H at such point defects in y-LiAlO2.

Charged defect analysis, Tritium-producing burnabl↗
DOE OSTI2019

Modeling Framework and Results to Inform Charging Infrastructure Investments

NREL analysis will inform VTO on costs/benefits of DOE investment in an array of electric vehicle charging infrastructure technologies, trade-offs between residential and non-residential solutions, and cost of charging to consumers. Additional analysis will focus on vehicle sales, energy consumption, and emission impacts of meeting DOE technology target goals ahead of or behind schedule (timing assessment).

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2025

EV-EVSE Fault Study: An Analysis of Thermal Events Caused by Electrical Faults during DC Charging

This report outlines multiple avenues of analysis of electrical faults associated with electric vehicles (EVs) during charging, focusing specifically on the interactions between EVs and EV supply equipment (EVSE). Key concerns include the identification and mitigation of overtemperature events that can result in fires, which are commonly initiated by localized heating of connectors, wiring, or high-impedance fault current paths.

42 - ENGINEERING↗
DOE OSTI2021

Modeling nanoparticle charge distribution in the afterglow of non-thermal plasmas and comparison with measurements

Particle charging in the afterglows of non-thermal plasmas typically take place in a non-neutral space charge environment. We model the same by incorporating particle-ion collision rate constant models, developed in prior work by analyzing particle-ion trajectories calculated using Langevin Dynamics simulations, into species transport equations for ions, electrons and charged particles in the afterglow. A scaling analysis of particle charging and additional Langevin Dynamics calculations of the particle-ion collision rate constant are presented to extend the range of applicability to ion electrostatic to thermal energy ratios of 300 and diffusive Knudsen number (that scales inversely with gas pressure) up to 2000. The developed collision rate constant models are first validated by comparing predictions of particle charge against measured values in a stationary, non-thermal DC plasma from past PK-4 campaigns published in Phys. Rev. Lett. 93(8): 085001 and Phys. Rev. E 72(1): 016406). The comparisons reveal excellent agreement within ±35% for particles of radius 0.6,1.0,1.3 μm in the gas pressure range of ~20-150 Pa. The experiments to probe particle charge distributions by Sharma et al. (J. Physics D: Appl. Phys. 53(24): 245204) are modeled using the validated particle-ion collision rate constant models and the calculated charge fractions are compared with measurements. The comparisons reveal that the ion/electron concentration and gas temperature in the afterglow critically influence the particle charge and the predictions are generally in qualitative agreement with the measurements. Along with critical assessment of the modeling assumptions, several recommendations are presented for future experimental design to probe charging in afterglows.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2016

Charge Carrier Diffusion Length Determination in 4H-SiC Schottky Alpha Detectors

When developing semiconductor radiation detectors detailed characterization of the detector behavior is required. The ability of a semiconductor radiation detector to collect the charge liberated by incident ionizing radiation is a critical characteristic. Several factors influence the charge collection efficiency of a semiconductor radiation detector, including electron-hole trapping, applied electric field strength, and dopant concentrations and dimensions of low doped regions. Applying a reverse bias electric potential to a low doped semiconductor region creates a free charge carrier depleted region and establishes an electric field which can remove subsequently freed charge in the form of an electrical signal. When ionizing radiation is incident upon a semiconductor electron-hole pairs are generated. These charge carriers are created along the path of the ionizing radiation regardless of the doping concentration. However, only the charge freed in the low doped epitaxial region of a detector will be collected as a result of the applied electric field. When the electric field is insufficient to develop a depleted region equal to or larger than the range of the ionizing radiation in the detector material some charge freed by the ionizing radiation outside of the sensitive region will be lost, thus potentially resulting in less than complete charge collection. The incomplete collection of charge complicates the analysis of the incident particle energy spectrum. Charge freed in the highly doped bulk region beyond the low doped epitaxial region may diffuse back into the low doped depleted region and be subsequently included in the integral pulse. The amount of charge collected as a result of this diffusion mechanism is dependent upon the diffusion length of the charge carriers in the material. The diffusion length is subsequently dependent on the material properties of the detector including the number of defects, trapping centers, and temperature. In order to fully characterize the properties of 4H-SiC as a radiation detector the diffusion length was calculated by adjusting the theoretical diffusion length value used in the calculation of the charge collection efficiency to agree with empirically observed charge collection efficiencies. The discrepancy between the observed and theoretical charge collection efficiency at 50 to 150 volts applied bias indicates an unexplained charge collection phenomenon which is contributing to the larger than predicted charge collection efficiency of the detectors. This voltage range corresponds to an intermediate applied bias, indicating that either the theoretical depletion width is too short, the diffusion length varies with the composition of the region that the charge carriers are diffusing through, or some other phenomenon is involved. If the charge carrier diffusion length varies depending on whether or not the diffusing charge is freed in unbiased epitaxy or bulk layer, then a function describing the variation of the diffusion layer could be determined by measuring the diffusion length at the applied voltages used previously, but over a range of epitaxial layer thicknesses. Future work includes the characterization of the effects of high temperature operation on the diffusion length of 4H-SiC in addition to measuring the effects of varying energy alpha emitter electrodeposition on the observed diffusion length. Additional Schottky barrier contacts, namely those with a nickel-platinum contact, will be tested in various sizes which have been developed in order to eliminate certain failure mechanisms and explore the potential effects of Schottky contact size on charge collection efficiency. (authors)

36 MATERIALS SCIENCE↗
DOE OSTI2016

Proof-of-Concept Study for Uncertainty Quantification and Sensitivity Analysis using the BRL Shaped-Charge Example

These are the slides for a graduate presentation at Mississippi State University. It covers the following: the BRL Shaped-Charge Geometry in PAGOSA, mesh refinement study, surrogate modeling using a radial basis function network (RBFN), ruling out parameters using sensitivity analysis (equation of state study), uncertainty quantification (UQ) methodology, and sensitivity analysis (SA) methodology. In summary, a mesh convergence study was used to ensure that solutions were numerically stable by comparing PDV data between simulations. A Design of Experiments (DOE) method was used to reduce the simulation space to study the effects of the Jones-Wilkins-Lee (JWL) Parameters for the Composition B main charge. Uncertainty was quantified by computing the 95% data range about the median of simulation output using a brute force Monte Carlo (MC) random sampling method. Parameter sensitivities were quantified using the Fourier Amplitude Sensitivity Test (FAST) spectral analysis method where it was determined that detonation velocity, initial density, C1, and B1 controlled jet tip velocity.

45 MILITARY TECHNOLOGY, WEAPONRY, AND NATIONAL DEF↗
DOE OSTI2020

Pb dimerization greatly accelerates charge losses in MAPbI 3 : Time-domain ab initio analysis

Metal halide perovskites constitute a new type of semiconducting materials with long charge carrier lifetimes and efficient light-harvesting. The performance of perovskite solar cells and related devices is limited by nonradiative charge and energy losses, facilitated by defects. Combining nonadiabatic molecular dynamics and time-domain density functional theory, we demonstrate that charge losses depend strongly on the defect chemical state. By considering an extra Pb atom in CH 3 NH 3 PbI 3 , which is a common defect in lead halide perovskites, we investigate its influence on charge trapping and recombination. In a chemically inert form as a Pb interstitial, the extra Pb atom has only a mild influence on charge recombination. However, if the extra Pb atom binds to a native Pb atom to form a dimer, the charge trapping and recombination are greatly accelerated because the Pb-dimer creates a localized midgap trap state that couples strongly to the perovskite valence band edge. Holes disappear from the valence band two orders of magnitude faster than in the pristine perovskite and recombine with conduction band electrons one order of magnitude faster. The simulations identify the phonon modes involved in the nonradiative charge trapping and recombination and highlight the importance of rapid decoherence within the electronic subsystem for long carrier lifetimes. The detailed atomistic analysis of the charge trapping and recombination mechanisms enriches the understanding of defect properties and provides theoretical guidance for improving perovskite performance.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2015

Effect of the radio frequency discharge on the dust charging process in a weakly collisional and fully ionized plasma

A close analysis of dust charging process in the presence of radio frequency (RF) discharge on low pressure and fully ionized plasma for both weak and strong discharge's electric field is considered. When the electromagnetic waves pass throughout fully ionized plasma, the collision frequency of the plasma is derived. Moreover, the disturbed distribution function of plasma particles in the presence of the RF discharge is obtained. In this article, by using the Krook model, we separate the distribution function in two parts, the Maxwellian part and the perturbed part. The perturbed part of distribution can make an extra current, so-called the accretion rate of electron (or ion) current, towards a dust particle as a function of the average electron-ion collision frequency. It is proven that when the potential of dust grains increases, the accretion rate of electron current experiences an exponential reduction. Furthermore, the accretion rate of electron current for a strong electric field is relatively smaller than that for a weak electric field. The reasons are elaborated.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2016

Charge distribution and hydrogen bonding of a collagen α 2 ‐chain in vacuum, hydrated, neutral, and charged structural models

A challenging task in computational biophysics is to ascertain the solvent effect on the electronic structure and interatomic bonding at the atomistic level. Simulations must be carried out on reasonably large biomolecules for accurate calculations to yield valid results. We report the results of a calculation on collagen model in the form of a peptide under three different environments: vacuum, solvated and with neutral and charged sites. Quantitative results and analysis of the partial charge (PC) distribution on each amino acid are discussed. A significant charge transfer of more than 1 electron from protein to water molecules is found with similar results when the model contains charged sites. The main contributions to the interatomic bonding are from hydrogen bonds (HBs) between water‐water and water‐protein pairs. A connection between PC and HBs can be established since the nonpolar amino acids form no HBs and have the smallest PC and vice versa. The ab initio PC obtained are used in the NAMD simulation showing significant improvement over the default values as reflected in the root mean square deviation of atomic positions in the MD steps and the total free energy in energy minimization. These results could facilitate the interpretation of data on interaction of various ligands in charged proteins in relation to isoelectric points. © 2016 Wiley Periodicals, Inc.

Eifler, Jay↗
DOE OSTI2019

Evaluating Utility Costs Savings for EV Charging Infrastructure [Slides]

This analysis was conducted under the first round of the Solar Energy Innovation Network (SEIN), a program led by the National Renewable Energy Laboratory (NREL) that assembles diverse teams of stakeholders to research solutions to real-world challenges associated with solar energy adoption. As part of the Solar Energy Innovation Network, NREL used a tool called REopt to evaluate the impact on utility costs of light duty electric vehicle (EV) charging stations in Minnesota. The analysis models EV chargers at medium offices in Minneapolis, Minnesota. Specifically, the analysis explores three questions: (a) How can photovoltaics (PV) and stationary storage be co-deployed with EV charging infrastructure to lower the cost of purchasing grid electricity? (b) What are the potential savings of co-locating EV charging infrastructure with (behind the meter of) a commercial building? and (c) What savings can be gained from optimizing the times at which the EVs are charged to decrease lifecycle costs? Note that this presentation is not indented to be presented widely, but is just to provide ReOpt outputs for the partner's use.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2016

Fast Charge Battery Electric Transit Bus In-Use Fleet Evaluation

The focus of this interim fleet evaluation is to characterize and evaluate the operating behavior of Foothill Transit's fast charge battery electric buses (BEBs). Future research will compare the BEBs' performance to conventional vehicles. In an effort to better understand the impacts of drive cycle characteristics on advanced vehicle technologies, researchers at the National Renewable Energy Laboratory analyzed over 148,000 km of in-use operational data, including driving and charging events. This analysis provides an unbiased evaluation of advanced vehicle technologies in real-world operation demonstrating the importance of understanding the effects of road grade and heating, ventilating and air conditioning requirements when deploying electric vehicles. The results of this analysis show that the Proterra BE35 demonstrated an operating energy efficiency of 1.34 kWh/km over the data reporting period.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2014

Molecular-scale investigations of structures and surface charge distribution of surfactant aggregates by three-dimensional force mapping

Surface charges on nanoscale structures in liquids, such as biomolecules and nano-micelles, play an essentially important role in their structural stability as well as their chemical activities. These structures interact with each other through electric double layers (EDLs) formed by the counter ions in electrolyte solution. Although static-mode atomic force microscopy (AFM) including colloidal-probe AFM is a powerful technique for surface charge density measurements and EDL analysis on a submicron scale in liquids, precise surface charge density analysis with single-nanometer resolution has not been made because of its limitation of the resolution and the detection sensitivity. Here we demonstrate molecular-scale surface charge measurements of self-assembled micellar structures, molecular hemicylinders of sodium dodecyl sulfate (SDS), by three-dimensional (3D) force mapping based on frequency modulation AFM. The SDS hemicylindrical structures with a diameter of 4.8 nm on a graphite surface were clearly imaged. We have succeeded in visualizing 3D EDL forces on the SDS hemicylinder surfaces and obtaining the molecular-scale charge density for the first time. The results showed that the surface charge on the trench regions between the hemicylinders was much smaller than that on the hemicylinder tops. The method can be applied to a wide variety of local charge distribution studies, such as spatial charge variation on a single protein molecule.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1986

Statistical performance of the intensified charged coupled device

The first analysis of the statistical performance of the intensified charge coupled device (CCD) is presented. The Poisson statistics of the arriving photons, the exponential pulse height distribution of the microchannel plate in the image intensifier, and the effects of discrete digitization of the charge in reading the CCD are included. A range of intensifier gains from the high levels that permit pulse counting to the low levels that can be used with the accumulation of charge on the CCD is considered. As a tool for this analysis, an analytical model of the performance of the detector system that is generally useful for predicting many aspects of system performance under a wide range of conditions is developed. The statistical penalty for operating the intensified CCD in the charge accumulation mode is not severe, and in some applications it may be desirable to accept this penalty to gain the advantages of increased dynamic range through charge accumulation. This investigation has revealed no pathological aspects of the operation of the detector system.

Sandel, B. R.↗
DOE OSTI2021

Analysis of the EMCCD point-source response using x-rays

Electron Multiplying Charge Coupled Devices, EMCCD are used as x-ray detectors. The NSLS-II Soft Inelastic x-ray Scattering (SIX) beam line has two EMCCDs for x-ray detection in the spectrometer arm. The spectrometer with high resolving power disperses x-rays vertically. The x-ray vertical position on the sensor plane is related to its energy. This allows for very accurate x-ray energy measurements through x-ray coordinates. X-rays interact with silicon and create a number of electron-hole pairs proportional to the x-ray energy. Electrons drift and diffuse toward pixel gates and are collected there. The diffused electrons form a charge cloud distributed over several neighboring pixels. This charge sharing enables coordinate measurements with accuracy better than the pixel pitch. The charge distribution shape has to be taken into account to achieve ultimate accuracy in coordinate measurements. In this paper, we present a method of the charge distribution shape analysis and demonstrate its applications. The drift and diffusion of electrons ftom the point of generation to pixel gates results in the bell-shaped electron cloud usually approximated by Gaussian shape. The number of electrons collected under a pixel is proportional to the shape function integral. These electron packets get transferred to the sense node of the output amplifier. The transfer process could introduce distortions to the original charge distribution. For example, during transfers, electrons in the packet could be exposed to traps if they are present in the sensor. The trapping and later the release processes distort the apparent shape of the charge distribution. Therefore, deviations of the charge distribution shape ftom the originally symmetrical form can indicate the presence of trap centers in the sensor and can be used for sensor diagnostics.

47 OTHER INSTRUMENTATION↗
DOE OSTI2015

Charged current quasi-elastic neutrino analysis at MINERνA

MINERνA (Main INjector Experiment for ν-A) is a neutrino scattering experiment in the NuMI high-intensity neutrino beam at the Fermi National Accelerator Laboratory. MINERvA was designed to make precision measurements of low energy neutrino and antineutrino cross sections on a variety of different materials (plastic scintillator, C, Fe, Pb, He and H2O). We present the current status of the charged current quasi-elastic scattering in plastic scintillator.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1987

Reduction and scientific analysis of data from the charge-energy-mass (CHEM) spectrometer on the AMPTE/CCE spacecraft

The Charge-Energy-Mass (CHEM) spectrometer instrument on the AMPTE/Charge Composition Explorer (CCE) spacecraft is designed to measure the mass and charge-state abundance of magnetospheric and magnetosheath ions between 0.3 and 315 keV/e, an energy range that includes the bulk of the ring current and the dynamically important portion of the plasma sheet population. Continuing research is being conducted using the AMPTE mission data set, and in particular, that of the CHEM spectrometer which has operated flawlessly since launch and still provides excellent quality data. The requirted routine data processing and reduction, and software develpment continues to be performed. Scientific analysis of composition data in a number of magnetospheric regions including the ring current region, near-earth plasma sheet and subsolar magnetosheath continues to be undertaken. Correlative studies using data from the sister instrument SULEICA, which determines the mass and charge states of ions in the energy range of approximately 10 to 250 keV/e on the IRM, as well as other data from the CCE and IRM spacecraft, particularly in the upstream region and plasma sheet have also been undertaken.

Gloeckler, G.↗