Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “cathode utilization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Electrochemical Performance and Stability of the Cathode for Solid Oxide Fuel Cells II. Role of Ni diffusion on LSM performance

The sintering of a standard (La 0.8 Sr 0.2 ) 0.98 MnO 3 (LSM-20) solid oxide fuel cell cathode composition (in the temperature range of 1050-1200ºC) on anode-supported cells utilizing a Ni-YSZ anode and thin YSZ electrolyte (<10 μm thickness) has revealed the need for a protective ceria interlayer to prevent a detrimental interaction between the YSZ and the LSM. The interaction, however, is not the typically assumed formation of insulating La- and/or Sr-zirconate, but rather the result of Ni diffusion from the anode through the YSZ electrolyte and into the LSM resulting in coarsening and increased densification of the LSM microstructure. As an alternative to the use of a protective ceria interlayer, the presence of YSZ in the cathode material was able to suppress coarsening of LSM, thereby significantly improving the electrochemical performance.

30 DIRECT ENERGY CONVERSION↗

Reversible anionic redox activity in Na 3 RuO 4 cathodes: a prototype Na-rich layered oxide

Sodium-ion batteries are attractive for large-scale energy storage due to the abundance of sodium, but the deficient capacity achieved by cathode materials prevents their further applications. Chemical substitution of Na in transition metal layers is a promising solution to utilize both the cationic and anionic redox activities for boosting energy storage. Unfortunately, different from the classic Li-rich Li 2 MnO 3 , a pure prototype with anionic redox activity has not been found among the typical Na-rich cathodes. In this paper, we originally design a Na-rich layered oxide prototype, namely Na 3 RuO 4 (Ru 5+ ), which delivers a partial reversible capacity solely via the participation of oxygen anions. More importantly, the anionic redox activity is validated by the in situ Raman observation of reversible peroxo-based O–O (de)bonding upon cycling. Finally, our findings not only highlight the multiple electron-transfer strategy for capacity extension, but also broaden the horizon in designing Na-rich electrode materials for high-energy sodium-ion batteries.

25 ENERGY STORAGE↗

Recent Progress in Solid‐State Lithium Batteries through Cathode Microstructure Engineering

A high‐performance cathode is necessary to realize the great potentials of solid‐state batteries such as high energy density and long cycle life. It is also needed to validate electrolyte performance, which is lacking. Currently, cathodes for solid‐state batteries are thinner and have lower cathode active material content than their lithium‐ion battery counterpart, resulting from insufficient conductivity and limiting the battery energy density. This review article provides an overview of recent development in cathode microstructures and their impact on battery properties, including compatibility between cathode and electrolyte, cathode architecture design, interface engineering, correlation between material properties, cathode processing approaches, and performance, as well as the advanced characterization methods used to understand the above correlations . Some perspectives on future development are shared including utilizing in situ and operando characterization tools to better understand dynamic evolution of the cathode/electrolyte interface, adapting artificial intelligence and machine learning to design and optimize cathode structures. The article is aimed to promote research interest on cathode development and advance solid‐state battery technologies.

cathode engineering↗

Reversible dual anionic-redox chemistry in NaCrSSe with fast charging capability

Utilizing the anionic redox reaction opens new approaches for the development of new cathode materials with extra capacities. Although, it suffers from several obstacles such as voltage hysteresis and sluggish kinetics. In this paper, a new layered chalcogenide-based on dual anionic-redox reaction is reported. The newly designed layered NaCrSSe exhibits the capacity of almost all Na + intercalation/deintercalation (137 mAh/g -1 at 50 mA/g), and a unique charge/discharge feature with a small polarization of 0.15 V and high energy efficiency of ~92% in initial cycles. Furthermore, a superior high-rate charge capacity of 115.5mAh/g -1 (83.7% retention) was achieved at 27.8 C (4000 mA/g -1 ). Systematic characterization studies on structure evolution and DFT calculation show the charge compensation of S and Se anions during cycling. Overall, these results will enrich the anion redox chemistry and provide valuable information for developing new anion-redox based cathode materials with high capacity and fast kinetics.

25 ENERGY STORAGE↗

Anode-less Solid-State Li–S Batteries Enabled by Fe-Stabilized Polysulfides

Anode-less solid-state lithium-sulfur batteries (SSLSBs) with lithium sulfide (Li 2 S) as the cathode promise a high energy density and ease of manufacturing. However, Li 2 S is plagued by poor conductivity, sluggish activation kinetics, and a poor cycle life. Here, in this study, we report an FeCl 3 -activated Li 2 S (FLS) cathode with solid-state polysulfide intermediates generated through a redox reaction between FeCl 3 and Li 2 S. This strategy is shown to boost the electrical conductivity of Li 2 S by 7 orders of magnitude and lower the activation barrier. During cycling, Fe plays a significant role in stabilizing the highly active polysulfide species, contributing to the exceptional electrochemical performance. The FLS cathode achieves 80% capacity retention over 500 cycles with >99% Li 2 S utilization. Furthermore, a Li-metal-free (anode-less) full cell retained over 80% of its initial capacity after 240 cycles. This work underscores the promise of leveraging Fe-stabilized polysulfides in enabling high-energy, long-lasting, solid-state Li-S batteries.

25 ENERGY STORAGE↗

Fabrication of AlN/BN bishell hollow nanofibers by electrospinning and atomic layer deposition

Aluminum nitride (AlN)/boron nitride (BN) bishell hollow nanofibers (HNFs) have been fabricated by successive atomic layer deposition (ALD) of AlN and sequential chemical vapor deposition (CVD) of BN on electrospun polymeric nanofibrous template. A four-step fabrication process was utilized: (i) fabrication of polymeric (nylon 6,6) nanofibers via electrospinning, (ii) hollow cathode plasma-assisted ALD of AlN at 100 °C onto electrospun polymeric nanofibers, (iii) calcination at 500 °C for 2 h in order to remove the polymeric template, and (iv) sequential CVD growth of BN at 450 °C. AlN/BN HNFs have been characterized for their chemical composition, surface morphology, crystal structure, and internal nanostructure using X-ray photoelectron spectroscopy, scanning electron microscopy, transmission electron microscopy, energy dispersive X-ray spectroscopy, and selected area electron diffraction. Measurements confirmed the presence of crystalline hexagonal BN and AlN within the three dimensional (3D) network of bishell HNFs with relatively low impurity content. In contrast to the smooth surface of the inner AlN layer, outer BN coating showed a highly rough 3D morphology in the form of BN nano-needle crystallites. It is shown that the combination of electrospinning and plasma-assisted low-temperature ALD/CVD can produce highly controlled multi-layered bishell nitride ceramic hollow nanostructures. While electrospinning enables easy fabrication of nanofibrous template, self-limiting reactions of plasma-assisted ALD and sequential CVD provide control over the wall thicknesses of AlN and BN layers with sub-nanometer accuracy.

36 MATERIALS SCIENCE↗

Operando Synchrotron Studies of Inhomogeneity during Anode-Free Plating of Li Metal in Pouch Cell Batteries

Operando synchrotron X-ray diffraction (XRD) studies have not previously been used to directly characterize Li metal in standard batteries due to the extremely weak scattering from Li atoms. In this work, it is demonstrated the stripping and plating of Li metal can be effectively quantified during battery cycling in appropriately designed synchrotron XRD experiments that utilize an anode-free battery configuration in which a Li-containing cathode material of LiNi 0.6 Mn 0.2 Co 0.2 O 2 (NMC622) is paired with a bare anode current collector consisting of either Cu metal (Cu/NMC) or Mo metal (Mo/NMC). In this configuration, it is possible to probe local variations in the deposition and stripping of Li metal with sufficient spatial sensitivity to map the inhomogeneity in pouch cells and to follow these processes with sufficient time resolution to track state-of-charge-dependent variations in the rate of Li usage at a single point. For the Cu/NMC and Mo/NMC batteries, it was observed that the initial plating of Li occurred in a very homogeneous manner but that severe macroscopic inhomogeneity arose on a mm-scale during the subsequent stripping of Li, contrasting with the conventional wisdom that the greatest challenges in Li metal batteries are associated with Li deposition.

25 ENERGY STORAGE↗

Surface-Directed Fabrication of Integrated Membrane-Electrode Interfaces

In the past five years, we have established a research program to investigate the integration of electrode/catalyst support, gas diffusion pathways, and ionomer into a single network based on a bottom-up, surface-directed approach. Here, the porous electrode surface provides the common foundation for both catalyst deposition and ionomer growth to develop a highly controlled process. Our efforts have focused on (1) the preparation of surface-initiated ionomer that can be grown from electrodes of essentially any geometry and is chemisorbed to the active electrode surface, and (2) the integration of this ionomer with both planar and 3-D electrodes that are atomically modified by Pt catalysts. Figure 1 shows a schematic of a single pore of such an integrated cathode where a catalytic Pt atomic layer is supported along the pores of a nanoporous gold electrode. The catalyst layer is electronically accessible from the metal cathode and in contact with proton-conducting ionomer to yield extremely high utilization efficiencies of the catalyst (approaching 100%) with the ultralow loadings expected from atomic overlayers. We have introduced a new class of ionomer film that is grown from the catalyst/electrode interface to develop proton conducting pathways throughout the 3-D electrode and to the adsorbed catalyst particles. This ionomer is a comb polymer designed to contain sulfonate-lined channels for rapid proton conduction as well as hydrophobic domains (fluorocarbon or hydrocarbon) to promote O 2 solubility and transfer. This interfacial ionomer is designed to interface with a bulk membrane (such as Nafion) and an anode that could be engineered in a similar way. A key conclusion thus far is that ionomer and Pt catalyst can be integrated at a single interface (both 2-D and 3-D) to provide a high level of control over the construction of electrodes. To expand our efforts to date, we seek to utilize the materials chemistry we have developed to investigate how the depth-dependent structure of an ionomer film affects its performance in transferring protons and oxygen to accelerate the rate of the oxygen reduction reaction. By correlating structure and composition to performance and identifying barriers that limit efficiency, we seek to design ultra high performance ionomer films that are customized for the oxygen reduction reaction.

08 HYDROGEN↗

Advanced Coating Compositions and Microstructures to Improve Uptime and Operational Flexibility in Cyclic, Low-Load Thermal Utility Plants

GE, the University of Tennessee, and Oak Ridge National Laboratory collaborated from 2020 to 2023 developing two key technologies for improving the viability of fuel switching and load following in thermal utility plants: a) cost-effective weld overlay compositions for boiler tubing b) cathodic arc coatings that deliver improvements in both erosion resistance and oxidation resistance in high temperature steam for HP turbine blades The team worked through a robust, logical project map to de-risk these two technologies and advance them from TRL 3 to TRL 6. For the cost-effective weld overlay, the team developed a ferritic filler material which was fabricated at a vendor for 18% the average market cost of Inconel 625 wire, had a corrosion rate 3x lower in conditions simulating a biomass-fired superheater and 10x lower in conditions simulating a coal-fired superheater, and was fabricated into prototype overlaid tubing that passed ASME requirements including transverse bending, dye penetrant inspection, and ASTM G-76 evaluation. For the cathodic arc coatings applied to steam turbine blades, the team developed a novel composition that was successfully transferred to a qualified vendor. The vendor was able to produce coated prototypes with 4x the as-deposited erosion resistance and 10.4x the post-steam-exposure erosion resistance of the TiN coating the vendor currently applies on GE steam turbine components, without significantly increasing process cost. These coated prototypes also passed a GE inspection and showed favorable performance in high temperature erosion, nanoindentation, sliding wear, scratch adhesion, and high cycle fatigue testing. If successfully deployed by GE, it is anticipated that the technologies will enable the following: • 25%-50% increase in time between outages for both boilers and HP turbines. • 50% decrease in cost for weld overlay on a per foot basis relative to todays NiCr alloys. • Adequate oxidation resistance and erosion for HP turbine inlet steam at >620°C and >220 bar. • No need for changes in component supply chain or any notable Capital Expenditures. 5 Decreasing component cost, increasing performance, and extending time between outages represent direct value propositions to GE and their customers. For the American consumer, these objectives translate into increased grid reliability (fewer unexpected outages), decreased Levelized Cost of Electricity, and improved environmental health (low-loading/load following to accelerate penetration of renewables). The results also have implications for wear resistant tooling, wire arc additive manufacturing, more durable components for syngas cleanup, and deployment of more efficient thermochemical pathways for carbon negative fuel production

09 BIOMASS FUELS↗

Nanostructured Anatase Titania as a Cathode Catalyst for Li–CO 2 Batteries

The lithium – carbon dioxide (Li-CO 2 ) battery previously garnered significant interest over the past five years as a next-generation energy storage device. In this letter, we report a nanocomposite of anatase titania nanoparticles (TiO 2 -NP), carbon nanotubes (CNT), and carbon nanofibers (CNF) as a freestanding gas diffusion cathode (GDC) for Li-CO 2 batteries. Nanostructured anatase TiO 2 is demonstrated as a low-cost, easy-to-synthesize catalyst for CO 2 capture and utilization. With the developed composite electrode, we confirm the successful reversibility of the carbon dioxide reduction reaction (CDRR) and evolution reaction (CDER) at the cathode, and demonstrate improved Li-CO 2 cell performance, through a variety of materials and electrochemical characterization techniques.

25 ENERGY STORAGE↗

Operando Neutron Imaging of Lithium Flux and Gradient Cathode Design for Enhanced Kinetics in High‐Loading All‐Solid‐State Li─S Batteries

All-solid-state Li–sulfur batteries (ASSLSBs) are considered promising candidates for next-generation energy storage owing to their inherent safety, high energy density, and abundant sulfur resources. However, slow redox kinetics greatly limit sulfur utilization during solid-solid sulfur reactions, leading to significant challenges to achieve efficient performance in high-mass-loading ASSLSBs. Here, operando neutron image is employed to directly visualize, for the first time, that sluggish Li + transport kinetics and the uneven distribution of Li + during cathodic reactions are critical factors limiting sulfur conversion. To address this issue, gradient cathode architectures comprising three and five layers are designed, in which catholyte concentrations are strategically varied to optimize Li-ion flux and enhance ionic conductivity of the whole composite cathode electrode. Operando neutron imaging distinctly visualizes and confirms that three-layer gradient approach significantly enhances Li-ion mobility, resulting in more uniform redox reactions and greatly improved sulfur utilization compared to traditional non-gradient structures. Consequently, the three-layer gradient cathode achieves superior rate performance and reduced electrode polarization at high sulfur mass loadings of 4.5 and 6.0 mg cm −2 . Furthermore, the applicability and scalability of this design are demonstrated in a five-layer gradient cathode architecture, achieving an impressive discharge specific capacity increase from 656 mAh g −1 (three-layer gradient) to 1232 mAh g −1 at 1/20 C for ultra-high sulfur loading of 7.5 mg cm −2 . In conclusion, this innovative gradient cathode design offers substantial advancements in understanding and overcoming Li-ion transport limitations, paving the way toward practical, high-energy-density ASSLSBs.

25 ENERGY STORAGE↗

Cathode catalysts for fuel cell application derived from polymer precursors

A method of preparing M-N—C catalysts utilizing a sacrificial support approach and inexpensive and readily available polymer precursors as the source of nitrogen and carbon is disclosed. Exemplary polymer precursors include those that do not form complexes with iron, but which do complex with silica, for example, polyetheleneimine (PEI), Poly(2-ethyl-2-oxazoline), Poly(acrylamide-co-diallyldimethylammonium chloride), Poly(melamine-co-formaldehyde), Poly[[6-[(1,1,3,3-tetramethylbutyl)amino]-s-triazine-2,4-diyl]-[(2,2,6,6-tetramethyl-4-piperidyl)imino]-hexamethylene-[(2,2,6,6-tetramethyl-4-piperidyl)imino] and the like.

Serov, Alexey↗

A novel battery scheme: Coupling nanostructured phosphorus anodes with lithium sulfide cathodes

Lithium-ion batteries are approaching their theoretical limit and can no longer keep up with the increasing demands of human society. Lithium-sulfur batteries, with a high theoretical specific energy, are promising candidates for next generation energy storage. However, the use of Li metal in Li-S batteries compromises both safety and performance, enabling dendrite formation and causing fast capacity degradation. Previous studies have probed alternative battery systems to replace the metallic Li in Li-S system, such as a Si/Li2S couple, with limited success in performance. Recently, there is a focus on red P as a favorable anode material to host Li. In this work, we establish a novel battery scheme by utilizing a P/C nanocomposite anode and pairing it with a Li 2 S coated carbon nanofiber cathode. We find that red P anode can be compatible in ether-based electrolyte systems and can be successfully coupled to a Li 2 S cathode. Our proof of concept full-cell displays remarkable specific capacity, rate and cycling performances. We expect our work will provide a useful alternative system and valuable insight in the quest for next generation energy storage devices.

25 ENERGY STORAGE↗

Electron energy levels determining cathode electrolyte interphase formation

Cathode electrolyte interphase (CEI) has a significant impact on the performance of rechargeable batteries and is gaining increasing attention. Understanding the fundamental and detailed CEI formation mechanism is of critical importance for battery chemistry. Herein, a diverse of characterization tools are utilized to comprehensively analyze the composition of the CEI layer as well as its formation mechanism by LiCoO 2 (LCO) cathode. We reveal that CEI is mainly composed of the reduction products of electrolyte and it only parasitizes the degraded LCO surface which has transformed into a disordered spinel structure due to oxygen loss and lithium depletion. Based on the energy diagram and the chemical potential analysis, the CEI formation process has been well explained, and the proposed CEI formation mechanism is further experimentally validated. This work highlights that the CEI formation process is nearly identical to that of the anode-electrolyte-interphase, both of which are generated due to the electrolyte directly in contact with the low chemical potential electrode material. This work can deepen and refresh our understanding of CEI.

LiCoO2↗

Exploring a new synthesis route to lithium-excess disordered rock salt (DRX) cathode materials

Lithium-excess disordered rock salt (DRX) materials are promising candidates for Co/Ni-free Li-ion cathodes due to their high specific energy (800+ W h kg −1 ) and compositional flexibility. DRX cathodes are typically synthesized using solid-state reactions, which are difficult to scale and provide little-to-no control over particle morphology. Here, to address this bottleneck, the present study reports a two-step, solution-based reaction route to prepare Mn/Ti-based DRX oxyfluoride cathodes with nominal compositions of Li 1.25 Mn 0.5 Ti 0.3 O 1.95 F 0.05 and Li 1.35 Mn 0.7 Ti 0.1 O 1.85 F 0.15 . More specifically, a glycine–nitrate combustion reaction is used to produce a lithiated transition metal oxide, which is further reacted with LiF to produce high-purity DRX powders. Remarkably, this route yields 80–90% pure DRX after annealing for 1 h at 800–1000 °C, and 19 F solid-state nuclear magnetic resonance (ssNMR) spectra demonstrate that F− anions are successfully incorporated into the DRX structure. Cathodes prepared using this approach exhibit promising electrochemical performance, with Li 1.35 Mn 0.7 Ti 0.1 O 1.85 F 0.15 attaining reversible capacities ∼210 mA h g −1 and moderate cycling stability in half cells (65% capacity retention over 150 cycles). Overall, these results demonstrate that utilizing novel metal oxide precursors presents a viable and largely unexplored method to produce high-performance Co/Ni-free DRX cathodes.

25 ENERGY STORAGE↗

Air-Cooled Stack Freeze Tolerance

Air-cooled stack technology offers the potential for a simpler system architecture (versus liquid-cooled) for applications below 4 kilowatts. The combined cooling and cathode air allows for a reduction in part count and hence a lower cost solution. However, efficient heat rejection challenges escalate as power and ambient temperature increase. For applications in ambient temperatures below freezing, the air-cooled approach has additional challenges associated with not overcooling the fuel cell stack. The focus of this project was freeze tolerance while maintaining all other stack and system requirements. Through this project, Plug Power advanced the state of the art in technology for air-cooled PEM fuel cell stacks and related GenDrive material handling application fuel cell systems. This was accomplished through a collaborative work plan to improve freeze tolerance and mitigate freeze-thaw effect failure modes within innovative material handling equipment fuel cell systems designed for use in freezer forklift applications. Freeze tolerance remains an area where additional research and understanding can help fuel cells to become commercially viable. This project evaluated both stack level and system level solutions to improve fuel cell stack freeze tolerance. At this time, the most cost effective solutions are at the system level. The freeze mitigation strategies developed over the course of this project could be used to drive fuel cell commercialization. The fuel cell system studied in this project was Plug Power's commercially available GenDrive platform providing battery replacement for equipment in the material handling industry. The fuel cell stacks were Ballard's commercially available FCvelocity 9SSL (9SSL) liquid-cooled PEM fuel cell stack and FCvelocity 1020ACS (Mk1020) air-cooled PEM fuel cell stack.

08 HYDROGEN↗

Deciphering the morphology of transition metal carbonate cathode precursors

The performance and life of Li-ion battery cathode materials are determined by both the composition (crystal structure and transition metal ratio) and the morphology (particle size, size distribution, and surface area). Careful control of these two aspects is the key to long lasting, high-energy batteries that can undergo fast charge. Developing such cathodes requires manipulation of the synthesis conditions, namely the coprecipitation process to develop the precursor and a calcination step to lithiate and convert it to a transition metal oxide. In this paper, we utilize a combination of controlled synthesis, microscopic and spectroscopic characterization, and multi-scale mathematical modeling to shed light on the synthesis of cathode precursors. The complex interplay between the various chemical reactions in the co-precipitation process is studied to provide experimentalists with guidance on achieving composition control during synthesis. Further, the formation of a variety of morphologies of the primary particles and the driving force for agglomeration is mathematically described, for the first time, based on an energy minimization approach. Results suggest that the presence of Ni and/or Co significantly lowers the reaction rate constant compared to Mn, resulting in agglomerated growth in the former and single crystal growth in the latter. Modeling studies are used to provide a phase map describing the synthesis conditions needed to control the secondary particle size and corresponding size distribution. Finally, this paper represents an important step in developing a computationally guided approach to the synthesis of battery cathode materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Research Performance Progress Report

The focus of this project was catalysis by ‘proton coupled electron transfer’ (PCET) to metal bound fragments derived from the most abundant small molecules (i. e. O 2 and N 2 ). There are many important chemical challenges that are tied to this fundamental reaction type. Among these are: metal catalyzed oxidations of organic molecules utilizing O 2 as the oxidant; reduction of O 2 to water close to the thermodynamic potential – in other words, the cathode of any fuel cell based on reactions with O 2 ; transfer of reduced nitrogen species to organic substrates; fixation of nitrogen at modest temperatures and pressures. Any one of these problems has obvious implications for the generation and/or utilization of energy on a large scale.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗