Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “break”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS2002

Analysis of unrejoined chromosomal breakage in human fibroblast cells exposed to low- and high-LET radiation

Reported studies of DNA breakage induced by radiation of various qualities have generally shown a higher fraction of unrejoined residual breaks after high-LET exposure. This observation is supported by the argument that high-LET radiation induced DNA breaks that are more complex in nature and, thus, less likely to be repaired. In most cases the doses used in these studies were very high. We have studied unrejoined chromosome breaks by analyzing chromosome aberrations using a fluorescence in situ hybridization (FISH) technique with a combination of whole chromosome specific probes and probes specific for the telomere region of the chromosomes. Confluent human fibroblast cells (AG1522) were irradiated with gamma rays, 490 MeV/nucleon Si, or with Fe ions at either 200 and 500 MeV/nucleon, and were allowed to repair at 37 degrees C for 24 hours after exposure. A chemically induced premature chromosome condensation (PCC) technique was used to condense chromosomes in the G2 phase of the cell cycle. Results showed that the frequency of unrejoined chromosome breaks was higher after high-LET radiation, and the ratio of unrejoined to misrejoined chromosome breaks increased steadily with LET up a peak value at 440 keV/microm.

NASA Discipline Radiation Health↗
NASA NTRS1998

Repair of clustered DNA damage caused by high LET radiation in human fibroblasts

It has recently been demonstrated experimentally that DNA damage induced by high LET radiation in mammalian cells is non-randomly distributed along the DNA molecule in the form of clusters of various sizes. The sizes of such clusters range from a few base-pairs to at least 200 kilobase-pairs. The high biological efficiency of high LET radiation for induction of relevant biological endpoints is probably a consequence of this clustering, although the exact mechanisms by which the clustering affects the biological outcome is not known. We discuss here results for induction and repair of base damage, single-strand breaks and double-strand breaks for low and high LET radiations. These results are discussed in the context of clustering. Of particular interest is to determine how clustering at different scales affects overall rejoining and fidelity of rejoining of DNA double-strand breaks. However, existing methods for measuring repair of DNA strand breaks are unable to resolve breaks that are close together in a cluster. This causes problems in interpretation of current results from high LET radiation and will require new methods to be developed.

NASA Discipline Radiation Health↗
NASA NTRS2006

Electrical Arc Ignition Testing of Spacesuit Materials

A viewgraph presentation on electrical arc ignition testing of spacesuit materials is shown. The topics include: 1) Background; 2) Test Objectives; 3) Test Sample Materials; 4) Test Methods; 5) Scratch Test Objectives; 6) Cotton Scratch Test Video; 7) Scratch Test Results; 8) Entire Date Plot; 9) Closeup Data Plot; 10) Scratch Test Problems; 11) Poke Test Objectives; 12) Poke Test Results; 13) Poke Test Problems; 14) Wire-break Test Objectives; 15) Cotton Wire-Break Test Video; 16) High Speed Cotton Wire-break Test Video; 17) Typical Data Plot; 18) Closeup Data Plot; 19) Wire-break Test Results; 20) Wire-break Tests vs. Scratch Tests; 21) Urethane-coated Nylon; and 22) Moleskin.

Smith, Sarah↗
NASA NTRS2007

Quasi-Periodic Variability in NGC 5408 X-1

We report the discovery with XMM-Newton of quasiperiodic variability in the 0.2 - 10 keV X-ray flux from the ultraluminous X-ray source NGC 5408 X-1. The average power spectrum of all EPIC-pn data reveals a strong 20 mHz QPO with an average amplitude (rms) of 9%, and a coherence, Q identical with nu(sub 0)/sigma approximately equal to 6. In a 33 ksec time interval when the 20 mHz QPO is strongest we also find evidence for a 2nd QPO peak at 15 mHz, the first indication for a close pair of QPOs in a ULX source. Interestingly, the frequency ratio of this QPO pair is inconsistent with 3:2 at the 3 sigma level, but is consistent with a 4:3 ratio. A powerlaw noise component with slope near 1.5 is also present below 0.1 Hz with evidence for a break to a flatter slope at about 3 mHz. The source shows substantial broadband variability, with a total amplitude (rms) of about 30% in the 0.1 - 100 mHz frequency band, and there is strong energy dependence to the variability. The power spectrum of hard X-ray photons (greater than 2 keV) shows a "classic" flat-topped continuum breaking to a power law with index 1.5 - 2. Both the break and 20 mHz QPO are detected in the hard band, and the 20 mHz QPO is essentially at the break. The QPO is both strong and narrow in this band, having an amplitude (rms) of 15%, and Q approx. equal to 25. The energy spectrum is well fit by three components, a "cool" disk with kT = 0.15 keV, a steep power law with index 2.56, and a thermal plasma at kT = 0.87 keV. The disk, power law, and thermal plasma components contribute 35, 60, and 5% of the 0.3 - 10 keV flux, respectively. Both the timing and spectral properties of NGC 5408 X-1 are strikingly reminiscent of Galactic black hole systems at high inferred accretion rates, but with its characteristic frequencies (QPO and break frequencies) scaled down by a factor of 10 - 100. We discuss the implications of these findings in the context of models for ULXs, and their implications for the object's mass.

Strohmayer, Tod E.↗
NASA NTRS2010

Distribution of Chromosome Breakpoints in Human Epithelial Cells Exposed to Low- and High-LET Radiation

Low-and high-LET radiations produced distinct breakpoint distributions. The difference of the breakpoint distributions between low-and high-LET only appeared in break ends involved in interchromosome exchanges. The breakpoint distributions for break ends participating in intrachromosome exchanges were similar. Gene-rich regions do not necessarily have more chromosome breaks. High-LET appeared to produce long live (data not shown) or longer live breaks that can migrate a longer distance before rejoining with other breaks. Domains occupied by different segments of the chromosomes may be responsible for the breakpoint distribution. The dose responses for interchromosomal exchanges were linear in all four exposures. However, the dose response for intrachromosomal exchanges were none linear. Increasing dose of high dose rate exposure (Fe-ions or -rays) increase the fraction of cells with intrachromosome aberrations, whereas increasing dose of low dose rate exposure (neutrons or -rays) does not affect the fraction of cells with intrachromosome aberrations.

Hada, Megumi↗
NASA NTRS2011

Chromatin Structure and Radiation-Induced Intrachromosome Exchange

We have recently investigated the location of breaks involved in intrachromosomal type exchange events, using the multicolor banding in situ hybridization (mBAND) technique for human chromosome 3. In human epithelial cells exposed to both low- and high-LET radiations in vitro, intrachromosome exchanges were found to occur preferentially between a break in the 3p21 and one in the 3q11. Exchanges were also observed between a break in 3p21 and one in 3q26, but few exchanges were observed between breaks in 3q11 and 3q26, even though the two regions were on the same arm of the chromosome. To explore the relationships between intrachromosome exchanges and chromatin structure, we used probes that hybridize the three regions of 3p21, 3q11 and 3q26, and measured the distance between two of the three regions in interphase cells. We further analyzed fragile sites on the chromosome that have been identified in various types of cancers. Our results demonstrated that the distribution of breaks involved in radiation-induced intrachromosome aberrations depends upon both the location of fragile sites and the folding of chromatins

Mangala↗
NASA NTRS2021

NASA Ames Fatigue Countermeasures Laboratory and AA FRMS - A Working Relationship

American Airlines and NASA Ames Research Center have a long-standing partnership to conduct human factors fatigue research in airline operations. Since 2016, using a mechanism known as a Space Act Agreement, NASA Ames’ Fatigue Countermeasures Laboratory has worked with the American’s Fatigue Risk Management team to gather sleep and alertness data from volunteer flight crew members. Operations studied include long-range transpacific flights, timing of inflight rest breaks during augmented flights, and rates of acclimation related to flights making theater changes. This mutually beneficial collaborative working arrangement allows American to conduct operations of specific interest under the FAA’s Alternative Means of Compliance process and provides NASA with a means to gather and analyze data that can be used to inform operational safety-related decisions. Earlier this year, results from the study of inflight rest breaks was published in the journal Aerospace Medicine and Human Performance. A total of 500 American pilots responded to a survey with landing crew reporting more and better-quality sleep during break 2 than break 3. Subsequent ratings of sleepiness and alertness at TOD were significantly better for crew who used break 2. Findings from this study were reported to the FAA leading to an inflight fatigue mitigation capability for many pilots in the industry. An upcoming study is to evaluate workload and alertness levels during Caribbean Turn (DFW-SJO-DFW) operations. For this study, the FRMS team and NASA will ask volunteers to collect data on sleep, workload, performance, and alertness using scientifically valid methods The information gained in this study will help inform how workload and fatigue interact with duty duration during short-haul, daytime operations.

in-flight rest↗
NASA NTRSDate not supplied

High-Lift Common Research Model: RANS, HRLES and WMLES Perspectives for CLmax Prediction Using LAVA

A unified assessment of three turbulence treatments: Reynolds Averaged Navier-Stokes(RANS), Hybrid RANS/LES (HRLES) and Equilibrium Wall-Modelled Large Eddy Simulation(WMLES) is presented for the High-Lift Common Research Model (CRM-HL). For the free-air configuration, steady-state RANS simulations show very accurate drag polar predictions in the low-𝛼linear regime. However, strong grid sensitivity is reported near the maximum lift-state(𝐶𝐿max), with finer-grids showing larger errors and predicting erroneous flow topologies on the wing. Our RANS simulations show that several corrections for the Spalart-Allmaras (SA)turbulence model widely used in the community lead to more erroneous results compared to the baseline closure, without exception. Both scale-resolving methods (HRLES and WMLES)address these drawbacks and predict an outboard separation pattern on the main element that is in good agreement with the oil flow photographs taken from the QinetiQ wind tunnel experiments, when LES-appropriate grids and numerical discretizations are used. While RANS simulations with the baseline SA closure do not show any wing-root separation post𝐶𝐿max, both HRLES and WMLES show onset of corner flow separation with varying degrees of progression, along with a weak pitch break in the wing-contribution of the overall pitching moment. This post-𝐶𝐿max pitch break seen in the free-air simulations is weaker than the break observed in experiments, with a weaker break reported in WMLES for each iteration of grid-refinement. In-tunnel simulations using both SA-baseline RANS and WMLES show a much stronger post-𝐶𝐿max break with the WMLES predictions showing excellent agreement with the experiment in terms of both the flow-topology observed and the pressure-coefficients at various spanwise stations. Sensitivity to the tunnel wall boundary layer is characterized via comparisons between viscous and inviscid treatments for the tunnel walls. WMLES predictions show moderate sensitivity at the predicted inboard flow-state at 𝐶𝐿max along with the progression towards a post-𝐶𝐿max stall; however, this stalled state at 𝛼≈20◦(inside the tunnel) obtained with both tunnel wall treatments appears to be largely identical.

TTT↗
NASA NTRS1979

Estimating the cost of production stoppage

Estimation model considers learning curve quantities, and time of break to forecast losses due to break in production schedule. Major parameters capable of predicting costs are number of units made prior to production sequence, length of production break, and slope of learning curve produced prior to break.

Delionback, L. M.↗
NASA NTRS1984

Techniques for the study of gravity waves and turbulence (keynote paper), part 4

Probably one of the most important achievements mesosphere stratosphere troposphere (MST) radars can make toward increasing the understanding of the dynamics of the atmosphere is to determine the exact relationship between the generation of turbulence and the sources of high shear or convectively unstable flows. An important theoretical tool, the gravity-wave breaking through which one can begin to understand spontaneous generation of turbulence model is discussed. In this model, large amplitude gravity waves produce local regions where the Richardson number (N sup 2/U sub Z sup 2) is less than 1/4 thus giving rise to turbulent flows. Thus the appearance of turbulent layers can often be interpreted as a breaking-gravity-wave signature. Even though the techniques for studying gravity waves and turbulence may be quite different (and historically have resulted in somewhat separate bodies of literature), it is clear from the wave-breaking model that the phenomena are intimately linked. The techniques for measurements of gravity wave flow fields and turbulent regions by MST radar should show cognizance of some of the theoretical questions raised by the wave-breaking model.

Schoeberl, M. R.↗
NASA NTRS1984

A further study of gravity wave induced drag and diffusion in the mesosphere

Lindzen's (1967) parameterization for the drag and eddy diffusion produced by breaking internal gravity waves in the mesosphere and lower thermosphere is applied to a modified version of the beta-plane channel model of Holton (1982) in which an isotropic source spectrum of waves is specified similar to that given in 1982 by Matsuno (1982). The transmission for each wave component is influenced by Newtonian cooling and by eddy diffusion induced by the breaking of other wave components. In general the waves with smallest Doppler-shifted phase speeds break first and produce sufficient eddy diffusion to significantly raise the breaking heights for the higher speed components. Thus, the wave drag and diffusion is spread through a deep layer and the resulting mean wind profiles for both summer and winter solstice conditions are more realistic than those computed previously by Holton.

Holton, J. R.↗
NASA NTRS1985

Middle atmosphere modeling

Breaking gravity waves generate and maintain a background level of turbulence which is capable of producing substantial cooling and/or heating in the upper mesosphere and lower thermosphere. The net thermodynamic effect of breaking gravity waves is critically dependent on the eddy Prandt number (P sub t) applicable to mesospheric turbulence. When P sub t is approximately 1, the calculations of the heat budget for the mesopause region imply that the globally averaged eddy or turbulent diffusion coefficient cannot exceed .000001 sq cm/s. This upper limit on turbulant diffusion applies to both potential temperature transport and chemically inert tracer transport when radiative damping is neglible. For chemically active species larger diffusion coefficients are permitted, because the effective eddy diffusion coefficient is increased by an additive term L/2 gamma (sup 2), where L is the chemical loss rate and gamma is the vertical wavenumber. For P sub t is approximately 4 to 6, the turbulent diffusion of momentum (D sub M) is sufficiently greater than the turbulent diffusion of heat (D sub H) that the conversion of gravity wave energy to heat with high efficiency nearly balances the divergence of the downward eddy heat flux in the wave breaking zone. Therefore the heat budget of the mesopause region would no longer provide a powerful and useful constraint on D sub H. If P sub t exceeds 6 with high efficiency for energy conversion to heat, gravity waves would heat the mesosphere throughout the wave breaking region.

Strobel, D. F.↗
NASA NTRS1989

Neoplastic cell transformation by high-LET radiation - Molecular mechanisms

Quantitative data were collected on dose-response curves of cultured mouse-embryo cells (C3H10T1/2) irradiated with heavy ions of various charges and energies. Results suggests that two breaks formed on DNA within 80 A may cause cell transformation and that two DNA breaks formed within 20 A may be lethal. From results of experiments with restriction enzymes which produce DNA damages at specific sites, it was found that DNA double strand breaks are important primary lesions for radiogenic cell transformation and that blunt-ended double-strand breaks can form lethal as well as transformational damages due to misrepair or incomplete repair in the cell. The RBE-LET relationship for high-LET radiation is similar to that for HGPRT locus mutation, chromosomal deletion, and cell transformation, indicating that common lesions may be involved in these radiation effects.

Yang, Tracy Chui-Hsu↗
NASA NTRS1992

Analysis of gamma-ray burst spectra with cyclotron lines

Motivated by the recent developments in the cyclotron resonance upscattering of soft photons or CUSP model of Gamma Ray Burst (GBR) continuum spectra, we revisit a select database of GRBs with credible cyclotron absorption features. We measure the break energy of the continuum, the slope below the break and deduce the soft photon energy or the electron beam Lorentz factor cutoff. We study the correlation (or lack of) between various parameters in the context of the CUSP model. One surprise result is that there appears to be marginal correlation between the break energy and the spectral index below the break.

Kargatis, Vincent↗
NASA NTRS1994

Managing Action Duration Uncertainty with Just-In-Case Scheduling

Some applications involve automatic generation and execution of schedules that contain actions with uncertain durations. Such uncertainty can cause schedules to break during execution. This paper presents a technique, called Just-In-Case scheduling or JIC, for building robust schedules that tend not to break. The technique implements the common sense idea of being prepared for likely errors, just in case they should occur. The JIC algorithm analyzes a given schedule, determines where it is likely to break, reinvokes the scheduler to generate a contingent schedule for each highly probable break case, and produces a "multiply contingent" schedule. The technique was developed for a real telescope scheduling problem, and the paper presents empirical results showing that Just-In-Case scheduling performs extremely well for this problem.

Bresina, John↗
NASA NTRS2003

X-Ray Fluctuation Power Spectral Densities of Seyfert 1 Galaxies

By combining complementary monitoring observations spanning long, medium and short time scales, we have constructed power spectral densities (PSDs) of six Seyfert 1 galaxies. These PSDs span approx. greater than 4 orders of magnitude in temporal frequency, sampling variations on time scales ranging from tens of minutes to over a year. In at least four cases, the PSD shows a "break," a significant departure from a power law, typically on time scales of order a few days. This is similar to the behavior of Galactic X-ray binaries (XRBs), lower mass compact systems with breaks on time scales of seconds. NGC 3783 shows tentative evidence for a doubly-broken power law, a feature that until now has only been seen in the (much better-defined) PSDs of low-state XRBs. It is also interesting that (when one previously-observed object is added to make a small sample of seven), an apparently significant correlation is seen between the break time scale T and the putative black hole mass M(sub BH), while none is seen between break time scale and luminosity. The data are consistent with the linear relation T = M(sub BH) /10(exp 6.5) solar mass; extrapolation over 6-7 orders of magnitude is in reasonable agreement with XRBs. All of this strengthens the case for a physical similarity between Seyfert 1s and XRBs.

Markowitz, A.↗
NASA NTRS2003

Material Properties Analysis of Structural Members in Pumpkin Balloons

The efficient design, service-life qualification, and reliability predictions for lightweight aerospace structures require careful mechanical properties analysis of candidate structural materials. The demand for high-quality laboratory data is particularly acute when the candidate material or the structural design has little history. The pumpkin-shaped super-pressure balloon presents both challenges. Its design utilizes load members (tendons) extending from apex to base around the gas envelope to achieve a lightweight structure. The candidate tendon material is highly weight-efficient braided HM cord. Previous mechanical properties studies of Zylon have focused on fiber and yarn, and industrial use of the material in tensile applications is limited. For high-performance polymers, a carefully plamed and executed properties analysis scheme is required to ensure the data are relevant to the desired application. Because no directly-applicable testing standard was available, a protocol was developed based on guidelines fiom professional and industry organizations. Due to the liquid-crystalline nature of the polymer, the cord is very stiff, creeps very little, and does not yield. Therefore, the key material property for this application is the breaking strength. The pretension load and gauge length were found to have negligible effect on the measured breaking strength over the ranges investigated. Strain rate was found to have no effect on breaking strength, within the range of rates suggested by the standards organizations. However, at the lower rate more similar to ULDB operations, the strength was reduced. The breaking strength increased when the experiment temperature was decreased from ambient to 183K which is the lowest temperature ULDB is expected to experience. The measured strength under all test conditions was well below that resulting from direct scale-up of fiber strength based on the manufacturers data. This expected result is due to the effects of the braiding process and material ageing.

Sterling, W. J.↗
NASA NTRS1999

Reflections of AE Waves in Finite Plates: Finite Element Modeling and Experimental Measurements

The capability of a three-dimensional dynamic finite element method for predicting far-field acoustic emission signals in thin plates of finite lateral extent, including their reflections from the plate edges, was investigated. A lead break (Hsu-Neilsen) source to simulate AE was modeled and used in the experimental measurements. For the thin plate studied, the signals were primarily composed of the lowest order symmetric (S0) and antisymmetric (A0) Lamb modes. Experimental waveforms were detected with an absolutely calibrated, wideband, conical element transducer. The conditions of lead fractures both on the surface of the plate as well as on the edge of the plate were investigated. Surface lead breaks preferentially generate the A0 mode while edge lead breaks generate the S0 mode. Reflections of developed plate waves from both normal and oblique incidence angles were evaluated. Particularly interesting for the case of the lead break on the plate edge were S0 waves produced by the interaction of a Rayleigh wave with the plate corner and by a bulk shear wave mode converting at the side edge. The Rayleigh wave, in this case, propagated along the specimen edge. For all cases considered, the experimental measurements were in good agreement with the predictions of the finite element model.

Prosser, W. H.↗