Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “biosensor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Aerosol-Jet Printed Sensors for Environmental, Safety, and Health Monitoring: A Review

An emergent direct-write approach, aerosol-jet printing (AJP), is gaining attention for the deployment of rapid and affordable microadditively manufactured energy-efficient sensors and printed electronics. AJP enables a broad range of ink viscosities (0.001–1 Pa s) for printing diverse materials ranging from ceramics and metals to polymers and biological matter. Reproducible, high-spatial-resolution features (≈10 µm), and wide standoff distances (1–11 mm) between the nozzle and the substrate facilitate conformal printing of complex geometrical designs on nonplanar—e.g., stepped or curved—surfaces. Here this paper aims to provide a comprehensive overview of state-of-the-art AJP-based sensors (e.g., strain and temperature gauges, biosensors, photosensors, humidity and surface acoustic wave sensors, dielectric elastomer actuators, and motion, smoke, and hazardous gas detectors) and to discuss prospective applications. The drive toward cost-effective devices that are smaller, lighter, and better-performing remains a frontier challenge in the field of printed electronics. Consequently, as AJP becomes increasingly utilized in the high-volume manufacturing of miniaturized active and passive sensors, it opens a pathway for facile large-scale fabrication of devices for a wide range of consumer and industrial applications, including transportation, agriculture, infrastructure, aerospace, national defense, and healthcare.

3-dimensional↗

Laser‐Induced Nanodroplet Injection and Reconfigurable Double Emulsions with Designed Inner Structures

Abstract Microfabrication of complex double emulsion droplets with controlled substructures, which resemble biological cells, is an important but a highly challenging subject. Here, a new approach is proposed based on laser‐induced injection of water nanodroplets into a liquid crystal (LC) drop. In contrast to the conventional top‐down microfluidic fabrication, this method employs a series of bottom‐up strategies such as nanodroplet injection, spontaneous and assisted coalescence, elastically driven actuation, and self‐assembly. Each step is controlled precisely by adjusting the laser beam, interfacial tension, and its gradients, surface anchoring, and elasticity of the LC. Whispering gallery mode illumination is used to monitor the injection of droplets. A broad spectrum of double emulsions with a predesigned hierarchical architecture is fabricated and reconfigured by temperature, laser‐induced coalescence, and injection. The proposed bottom‐up method to produce customized microemulsions that are responsive to environmental cues can be used in the development of drug delivery systems, biosensors, and functional soft matter microstructures.

42 ENGINEERING↗

Highly Stable Silver Nanoplates for Surface Plasmon Resonance Biosensing

An SPR biosensor was developed by employing highly stable Au-protected Ag nanoplates (NP) as enhancers (see picture). Superior performance was achieved by depositing a thin and uniform coating of Au on the Ag surface while minimizing disruptive galvanic replacement and retaining the strong surface plasmon resonance (SPR) of the silver nanoplates.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Amino Acid Residues Controlling Domain Interaction and Interdomain Electron Transfer in Cellobiose Dehydrogenase

The function of cellobiose dehydrogenase (CDH) in biosensors, biofuel cells, and as a physiological redox partner of lytic polysaccharide monooxygenase (LPMO) is based on its role as an electron donor. Before donating electrons to LPMO or electrodes, an interdomain electron transfer from the catalytic FAD-containing dehydrogenase domain to the electron shuttling cytochrome domain of CDH is required. This study investigates the role of two crucial amino acids located at the dehydrogenase domain on domain interaction and interdomain electron transfer by structure-based engineering. The electron transfer kinetics of wild-type Myriococcum thermophilum CDH and its variants M309A, R698S, and M309A/R698S were analyzed by stopped-flow spectrophotometry and structural effects were studied by small-angle X-ray scattering. The data show that R698 is essential to pull the cytochrome domain close to the dehydrogenase domain and orient the heme propionate group towards the FAD, while M309 is an integral part of the electron transfer pathway – its mutation reducing the interdomain electron transfer 10-fold. Structural models and molecular dynamics simulations pinpoint the action of these two residues on the domain interaction and interdomain electron transfer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Peptide-assisted supramolecular polymerization of the anionic porphyrin meso-tetra(4-sulfonatophenyl)porphine

Electronics made from biological materials are desirable for use in medical devices, biosensors, and soft robotics because they have properties inaccessible to current inorganic technologies. Here, a series of cationic peptides were developed to self-assemble with the anionic porphyrin meso-tetra(4-sulfonatophenyl)porphine (TPPS4) into supramolecular light-harvesting wires known as J-aggregates were developed. In addition to quantifying the binding events between each peptide and TPPS 4 , we found co-incubation with mixed peptides allowed TPPS 4 to bridge two different peptides at their terminal porphyrin-binding regions. The J-aggregates formed on macroscopic scale in near quantitative yield within similar to 3 h and readily interconverted with the soluble monomers upon cycling the pH; to our knowledge, this is the first report of a peptide-porphyrin system with such properties. This work has practical and conceptual relevance to the development of new bioelectronic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Facile and template-free method toward chemical synthesis of polyaniline film/nanotube structures

Here, a facile and template-free method is reported to synthesize a new thin film structure: polyaniline (PANI) film/nanotubes (F/N) structure. The PANI F/N is a 100-nm thick PANI film embedded with PANI nanotubes. This well-controlled method requires no surfactant or organic acid as well as relatively low concentration of reagents. Synthesis condition studies reveal that aniline oligomers with certain structures are responsible for guiding the growth of the nanotubes. Electrical characterization also indicates that the PANI F/N possesses similar field-effect transistor characteristics to bare PANI film. With its 20% increased surface-area-to-volume (S/V) ratio contributed by surface embedded nanotubes and the excellent p-type semiconducting characteristic, PANI F/N shows clear superiority compared with bare PANI film. Such advantages guarantee the PANI F/N a promising future toward the development of ultra-high sensitivity and low-cost biosensors.

36 MATERIALS SCIENCE↗

Cry1A(b)16 toxin from Bacillus thuringiensis : Theoretical refinement of three‐dimensional structure and prediction of peptides as molecular markers for detection of genetically modified organisms

ABSTRACT Transgenic maize produced by the insertion of the Cry transgene into its genome became the second most cultivated crop worldwide. Cry gene from Bacillus thuringiensis kurstaki expresses protein derivatives of crystalline endotoxins which confer insect resistance onto the maize crop. Mandatory labeling of processed food containing or made by genetically modified organisms is in force in many countries, so, it is very urgent to develop fast and practical methods for GMO identification, for example, biosensors. In the absence of an available empirical structure of Cry1A(b)16 protein, a theoretical model was effectively generated, in this work, by homology modeling and molecular dynamics simulations based on two available homologous protein structures. Molecular dynamics simulations were carried out to refine the selected model, and an analysis of its global structure was performed. The refined models of Cry1A(b)16 showed a standard fold and structural characteristics similar to those seen in Bacillus thuringiensis Cry1A(a) insecticidal toxin and Bacillus thuringiensis serovar kurstaki Cry1A(c) toxin. After in silico analysis of Cry1A(b)16, two immunoreactive candidate peptides were selected and specific polyclonal antibodies were produced resulting in antibody–peptide interaction. Biosensing devices are expected to be developed for detection of the Cry1A(b) protein as a marker of transgenic maize in food. Proteins 2017; 85:1248–1257. © 2017 Wiley Periodicals, Inc.

Plácido, Alexandra↗

Enhanced Laser-Induced Graphene Microfluidic Integrated Sensors (LIGMIS) for On-Site Biomedical and Environmental Monitoring

The convergence of microfluidic and electrochemical biosensor technologies offers significant potential for rapid, in-field diagnostics in biomedical and environmental applications. Traditional systems face challenges in cost, scalability, and operational complexity, especially in remote settings. Addressing these issues, laser-induced graphene microfluidic integrated sensors (LIGMIS) are presented as an innovative platform that integrates microfluidics and electrochemical sensors both comprised of laser-induced graphene. This study advances the LIGMIS concept by resolving issues of uneven fluid transport, increased hydrophobicity during storage, and sensor biofunctionalization challenges. Key innovations include Y-shaped reservoirs for consistent fluid flow, hydrophilic polyethyleneimine coatings to maintain wettability, and separable microfluidic and electrochemical components enabling isolated electrode nanoparticle metallization and biofunctionalization. Multiplexed electrochemical detection of the neonicotinoid imidacloprid and nitrate ions in environmental water samples yields detection limits of 707 nm and 10 -5.4 m with wide sensing ranges of 5–100 µm and 10 -5 –10 -1 m, respectively. Similarly, uric acid and calcium ions are detected in saliva, demonstrating detection limits of 217 nm and 10 -5.3 m with sensing ranges of 10–50 µm, and 10 -5 –10 -2.5 m, respectively. Overall, this biosensing demonstrates the capability of the LIGMIS platform for multiplexed detection in biologically complex solutions, with applications in environmental water quality monitoring and oral cancer screening.

environmental monitoring↗

Interactions involved in the adsorption of ethylene glycol and 2-hydroxyethoxide on the Au(111) surface: a Density Functional Theory study

Abstract Context:The monolayers of ethylene glycol and 2-hydroxyethoxide on gold surfaces have been used in hybrid materials as biosensors. In this article, the adsorption of ethylene glycol and 2-hydroxyethoxide on the Au(111) surface was analyzed. For the first system, ethylene glycol on Au(111), there are Au$$\cdot \cdot \cdot $$ · · · O and Au$$\cdot \cdot \cdot $$ · · · H interactions. To the best of our knowledge, the Au$$\cdot \cdot \cdot $$ · · · H interaction has been overlooked until now. However, in this work, there is strong evidence that this interaction is important to stabilize the system. For the second system, the atomic interactions mentioned previously are also predicted, although there is an additional interaction between 2-hydroxyethoxide molecules. Such an interaction induces the link -O-H-O-, with high values of the electron density at the critical points of the corresponding bond path of the O-H interaction. These links suggest the forming of ethylene glycol chains.Methods:The calculations were performed using two exchange-correlation functionals: BEEF-vdW and C09$$_{x}$$ x -vdW; both functionals incorporate dispersion effects within the Kohn-Sham approach in Density Functional Theory as implemented in GPAW code and ASE computational packages. The contacts between the molecules considered in this article and the Au(111) surface were analyzed through the Quantum Theory of Atoms in Molecules implemented in GPUAM code.

Biochemistry & Molecular Biology↗

Lasing of Some Red Laser Dyes in Annealed Silica Xerogel

The spectral and energy characteristics of generation in the red spectral region 650–720 nm were measured and analyzed for three laser dyes in preliminarily annealed SiO{sub 2} xerogel matrices under laser excitation λ{sub p} = 588 nm in a nonselective cavity. The specific laser-energy output for two of them (LK678 and Ox170) in the matrices was 10–13% higher than in MeOH. NBA dye in the matrix generated two laser radiation bands in the 700–720 nm region with pumping E{sub p} ≥ 80 mJ whereas its generation threshold in MeOH exceeded the maximum pumping energy of 140 mJ so that NBA generation was not observed. Laser emission spectra of the studied matrices in a nonselective cavity were red-shifted by ~1000 cm{sup –1} from the fluorescence maximum. Such a shift could improve the characteristics of biosensors based on these matrices.

36 MATERIALS SCIENCE↗

Layer by Layer Photo-Cross-Linked Environmental Functional hydrogel Thin Films Based on Vanillin: Part 3

The present work emphasizes the preparation of new monomer from the family of vanillin acrylate. It has been prepared in two steps the name of the final product is [2-((ditert-butylamino) methyl)-4-formyl-6-methoxyphenyl acrylate] and abbreviated by TBAMVA, both products were evaluated by {sup 1}H, {sup 13}C NMR and FTIR and they were in the logic case with the chemical structure. The next step was the preparation of three different pH and temperature responsive copolymers by free radical polymerization of 5, 10, 20 mol% of TBAMVA and 5 mol% of maleimide photo-cross-linker with N-isopropylacrylamide. Polymers were chemically and physically characterized indicating the presence of the aldehyde group in the main chain. The lower critical solution temperature of polymers has been determined by two methods; the first one using turbidity measurements by UV–Vis Spectroscopy, another method using micro-DSC. The last step was the formation of pH-Temperature responsive hydrogel layer over gold and studying the swelling properties response to pH and temperature using surface plasmon resonance with the optical waveguide. In the present work, we focused on synthesizing new environmental functional polymers and hydrogel thin films used as biosensor as a target for many biological molecules in biosynthesis, drug delivery, and bio-separation.

36 MATERIALS SCIENCE↗

Environmentally Friendly Novel Maleated Poly(vinyl alcohol) Grafted 1, 4-Butanediol Modified with Biopolymer for Encapsulation of Capsaicin

Nowadays, hydrogels are widely used in many fields, for instance as biosensors, in tissue engineering and in agriculture due to their high swelling behavior in water and their softness. The objective of this work was to study the preparation and physical properties of maleated poly (vinyl alcohol) (PVAM)-graft-butanediol (BDO) (PVAM-graft-BDO) using K{sub 2}S{sub 2}O{sub 8} as an initiator. The highest grafting efficiency of 92% was found at 7:3 PVAM-graft-BDO. The swelling behavior of the PVAM-graft-BDO increased with an increasing BDO content. The highest swelling ratio of the PVAM-graft-BDO of 250% was found at 7:3 PVAM:BDO. Moreover, the maximum tensile strength of the PVAM-graft-BDO was observed at 9:1 PVAM:BDO. The elongation at break of the PVAM-graft-BDO was improved by the addition of natural rubber-graft-cassava starch (NS). The PVAM-graft-BDO was used as a polymer matrix for the encapsulation of capsaicin. The results showed that the rate of capsaicin release from the polymer matrix in a water medium was controlled by the BDO portion and the NS content. After use, it was easily degraded in natural soil.

36 MATERIALS SCIENCE↗

Enhanced sensitivity of hemoglobin sensor using dual-core photonic crystal fiber

A Hemoglobin (Hb) biosensor based on dual-core photonic crystal fiber is proposed and analyzed. In this paper, the effective refractive index dependency on the Hb concentration within a blood sample is utilized in obtaining the transmission spectrum variation. The results are calculated using full vectorial finite element method. Through this study, the effect of the structure geometrical parameters on the sensor performance is optimized to maximize the sensor sensitivity. The numerical results show a sensitivity of 8.013 nm/g/dL for the X-polarized mode at 3.7 cm fiber length and 7.68 nm/g/dL for the Y-polarized mode at 3.2 cm fiber length of the proposed sensor.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Slow light enhanced bio sensing properties of silicon sensors

In this paper, we investigated slow light to increase sensitivity and quality factor of our recently designed bio-sensors. A finite difference time domain and Plane Wave Expansion methods are employed to figure out sensors’ performances. We proposed slow light based photonic crystal structures with elliptical cells and we obtained higher sensitivity and quality factor as previously reported. For the first proposed sensor, the results showed that quality factor increased from 570 to 723 and a detection limit below 10{sup −3}. For the second sensor, the sensitivity increased from 550 to 650 nm/RIU and the detection limit is around 10{sup −3}. These two proposed structures would offer great potential for novel compact biosensors in medical application.

36 MATERIALS SCIENCE↗

Integrating Carbon Nanomaterials with Metals for Bio-sensing Applications

Age structure in most developed countries is changing fast as the average lifespan is increasing significantly, calling for solutions to provide improved treatments for age-related neurological diseases and disorders. In order to address these problems, a reliable way of recording information about neurotransmitters from in vitro and in vivo applications is needed to better understand neurological diseases and disorders as well as currently used treatments. Likewise, recent developments in medicine, especially with the opioid crisis, are demanding a swift move to personalized medicine to administer patient needs rather than population-wide averages. In order to enable the so-called personalized medicine, it is necessary to be able to do measurements in vivo and in real time. These actions require sensitive and selective detection of different analytes from very demanding environments. Current state-of-the-art materials are unable to provide sensitive and selective detection of neurotransmitters as well as the required time resolution needed for drug molecules at a reasonable cost. To meet these challenges, we have utilized different metals to grow carbon nanomaterials and applied them for sensing applications showing that there are clear differences in their electrochemical properties based on the selected catalyst metal. Additionally, we have combined atomistic simulations to support optimizing materials for experiments and to gain further understanding of the atomistic level reactions between different analytes and the sensor surface. With carbon nanostructures grown from Ni and Al + Co + Fe hybrid, we can detect dopamine, ascorbic acid, and uric acid simultaneously. On the other hand, nanostructures grown from platinum provide a feasible platform for detection of H 2 O 2 making them suitable candidates for enzymatic biosensors for detection of glutamate, for example. Tetrahedral amorphous carbon electrodes have an ability to detect morphine, paracetamol, tramadol, and O-desmethyltramadol. With carbon nanomaterial-based sensors, it is possible to reach metal-like properties in sensing applications using only a fraction of the metal as seed for the material growth. We have also seen that by using nanodiamonds as growth catalyst for carbon nanofibers, it is not possible to detect dopamine and ascorbic acid simultaneously, although the morphology of the resulting nanofibers is similar to the ones grown using Ni. This further indicates the importance of the metal selection for specific applications. However, Ni as a continuous layer or as separate islands does not provide adequate performance. Thus, it appears that metal nanoparticles combined with fiber-like morphology are needed for optimized sensor performance for neurotransmitter detection. This opens up a new research approach of application-specific nanomaterials, where carefully selected metals are integrated with carbon nanomaterials to match the needs of the sensing application in question.

59 BASIC BIOLOGICAL SCIENCES↗

The Metal Effect on Self-Assembling of Oxalamide Gelators Explored by Mass Spectrometry and DFT Calculations

Gels formed by self-assembly of small organic molecules are of wide interest as dynamic soft materials with numerous possible applications, especially in terms of nanotechnology for functional and responsive biomaterials, biosensors, and nanowires. Four bis-oxalamides were chosen to show if electrospray ionization mass spectrometry (ESI-MS) could be used as a prediction of a good gelator and also to shed light on the gelation processes. By inspecting the gelation of several solvent, we showed that bis(amino acid)oxalamide 1 proved to be the most efficient, also being able of forming the largest observable assemblies in the gas phase. The formation of singly charged assemblies holding from one up to six monomer units is the outcome of the strong intermolecular H-bonds, particularly among terminal carboxyl groups. The variation of solvents from polar aprotic towards polar protic did not have any significant effects on the size of the assemblies. The addition of a salt such as NaOAc or Mg(OAc){sub 2}, depending on the concentration, altered the assembling. Computational analysis at the DFT level aided in the interpretation of the observed trends and revealed that individual gelator molecules spontaneously assemble to higher aggregates, but the presence of the Na{sup +} cation disrupts any gelator organization since it becomes significantly more favorable for gelator molecules to bind Na{sup +} cations up to the 3:1 ratio than to self-assemble, being fully in line with experimental observations reported here. .

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗