Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “analytical models”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

An analytic model illustrating the effects of rotation on a magnetosphere containing low-energy plasma

The structure of an isolated rapidly rotating magnetosphere containing low-energy plasma is treated analytically. The plasma is confined to a thin sheet lying in the equatorial plane. Its effects as far as the magnetosphere as a whole is concerned are equivalent to those of an azimuthal current sheet. When the current distribution is assumed to have a certain form, it is possible to describe the complete solution in terms of simple functions. It is shown that neutral points eventually appear in the magnetic-field configuration, indicating that the magnetosphere is unable to contain additional plasma with the assumed distribution.

Gleeson, L. J.↗

Analytical models of the magnetic field of disk-shaped current sheets

Disk-shaped current distributions are useful tools in modeling the magnetospheres of Earth and other planets and have also been adapted for modeling the geotail. Such models usually start with an axisymmetric vector potential but may be modified to account for observed asymmetries, variable thickness, and warping in response to an inclined orientation of the planetary dipole axis. Models of this type until now either have lacked the ability to simulate a sharp inner edge of the current and to control accurately its falloff with distance or did not allow a simple analytical representation. Here existing methods will be reviewed, after which a new class of models which overcomes the above deficiencies and also allows the modeling of current disks of finite thickness flanked by current-free regions will be presented.

Tsyganenko, N. A.↗

Analytical model for balling defects in laser melting using rivulet theory and solidification

In laser welding and additive manufacturing communities, the balling (humping) defect is primarily attributed to the Plateau–Rayleigh fluid instability (PRI) with a few authors suggesting fluid jetting and volume conservation as alternative mechanisms. As analytical descriptions of these mechanisms are unavailable, combining them into a single formalism is unfeasible. We present a new model of PRI with higher accuracy, accounting for competition with solidification, to compare the expected behavior with known experimental trends when fluid jetting is neglected. We adapt a rivulet instability model from fluid physics to account for the stabilizing effects of the substrate, which the traditional cylindrical-jet geometry does not account for and estimate the instability growth rate. Our model yields a continuous transition from non-balling to balling hitherto lacking in current literature and predicts instability growth at higher wavelengths with strong sensitivity to the solidification front curvature. While the fluid surface is most unstable for shallow melt pools, the absolute magnitude of balling relevant to printing defects scales with melt pool depth and has a maximum for a given melt pool geometry. Synchrotron-based x-ray radiography of thin samples indicates that PRI growth rates and solidification can be comparable in magnitude and thus compete, as we find in this work. We predict that deviations between model predictions and our experimental results demonstrate the importance of fluid flows and heat transport in the balling process. Our experiments further demonstrate at least one mechanism by which the melt pool length and the balling wavelength are not equivalent, as commonly claimed.

Taylor, Z. [Stanford Univ., CA (United States); SL↗

Analytical modeling and simulation of electrical contact resistance for elastic rough electrode surface contact including frictional temperature rise

An improved electrical contact resistance (ECR) model for elastic rough electrode contact is proposed, incorporating the effects of asperity interactions and temperature rise by frictional and joule heating. The analytical simulation results show that the ECR decreases steeply at the beginning of the contact between Al and Cu. However, it becomes stabilized after reaching a specific contact force. It is also found that the longer elapsed sliding contact time, the higher ECR due to the increase in electrical resistivity of electrode materials by the frictional temperature rise at the interface. The effects of surface roughness parameters on ECR are studied through the 3 2 full-factorial design-of-experiment analysis. Based on the two representative roughness parameters, i.e., root-mean-square (rms) roughness and asperity radius, their individual and coupled effects on the saturated ECR are examined. The saturated ECR increases with the rms roughness for a rough machined surface condition, but it is hardly affected by the asperity radius. On the other hand, the saturated ECR increases with both the rms roughness and the asperity radius under a smooth thin film surface condition.

42 ENGINEERING↗

Analytical model and dynamical phase-field simulation of terahertz transmission across ferroelectrics

Here, we theoretically investigate the steady-state transmission of continuous terahertz (THz) wave across a freestanding ferroelectric slab. Based on the Landau-Ginzburg-Devonshire theory of ferroelectrics and the coupled equations of motion for polarization and electromagnetic (EM) waves, we derive the analytical expressions of the frequency- and thickness-dependent dielectric susceptibility and transmission coefficient at the thin slab limit in the harmonic excitation regime. When the slab thickness is much smaller than the THz wavelength in the ferroelectric, the analytical predictions agree well with the numerical simulations from a dynamical phase-field model that incorporates the coupled dynamics of strain, polarization, and EM wave in multiphase systems. At larger thicknesses, the transmission is mainly determined by the frequency-dependent attenuation of THz waves in the ferroelectric and the formation of a standing polarization/THz wave. Our results advance the understanding of the interaction between THz wave and ferroelectrics and suggest the potential of exploiting ferroelectrics to achieve low-heat-dissipation, nonvolatile voltage modulation of THz transmission for high-data-rate wireless communication.

36 MATERIALS SCIENCE↗

Analytical Model to Detect Fault Permeability Alteration Induced by Fault Reactivation in Compartmentalized Reservoirs

Underground fluid injection induces changes in in situ stress condition of the target formation and local faults that can potentially lead to fault reactivation, which may result in the leakage of injected and/or native fluids into neighboring formations. In this paper, we introduce an analytical method to detect fault reactivation caused by fluid injection into deep faulted aquifers considering across-fault leakage. The fundamental assumption made in our model is that fault permeability will be altered upon fault slip. Therefore, we model fault reactivation as a sudden change in fault permeability at the onset of fault slip. The fault is modeled as a linear interface between two permeable formations with equal rock and fluid properties. The governing equations are coupled through the fault interface and are solved using the Laplace-Fourier integral transform technique. Based on the analytical solution, we find the characteristic bottomhole pressure and pressure derivative responses that enable detecting fault reactivation using diagnostic plots. We observe that pressure derivative undergoes a rapid change at the onset of fault slip followed by a late-time trend to attain a new equilibrium governed by the altered fault permeability. Furthermore, we discuss the evolution of the across-fault leakage rate upon and after fault slippage. Here, the results from this study are presented in the form diagnostic plots and type curves that may be used for reservoir and fault characterization purposes.

54 ENVIRONMENTAL SCIENCES↗

A Simple Analytical Model for Predicting the Detectable Ion Current in Ion Mobility Spectrometry Using Corona Discharge Ionization Sources

Corona discharge ionization sources are often used in ion mobility spectrometers (IMS) when a non-radioactive ion source with high ion currents is required. Typically, the corona discharge is followed by a reaction region where analyte ions are formed from the reactant ions. In this work, we present a simple yet sufficiently accurate model for predicting the ion current available at the end of this reaction region when operating at reduced pressure as in High Kinetic Energy Ion Mobility Spectrometers (HiKE-IMS) or most IMS-MS instruments. It yields excellent qualitative agreement with measurement results and is even able to calculate the ion current within an error of 15%. Additional interesting findings of this model are the ion current at the end of the reaction region being independent from the ion current generated by the corona discharge and the ion current in High Kinetic Energy Ion Mobility Spectrometers (HiKE-IMS) growing quadratically when scaling down the length of the reaction region. .

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Analytic model for washout of HCl(g) from dispersing rocket exhaust clouds

The potential is investigated that precipitation scavenging of HCl from large solid rocket exhaust clouds may result in unacceptably acidic rain in the Cape Canaveral, Florida, area before atmospheric dispersion reduces HCl concentrations to safe limits. Several analytic expressions for HCl(g) and HCl(g + aq) washout are derived; a geometric mean washout coefficient is recommended. A previous HCl washout model is refined and applied to a space shuttle case (70 t HCl exhausted up to 4 km) and eight Titan 3 (60 percent less exhaust) dispersion cases. The vertical column density (sigma) decays were deduced by application of a multilayer Gaussian diffusion model to seven standard meteorological regimes for overland advection. The Titan 3 decays of sigma and initial rain pH differed greatly among regimes; e.g., a range of 2 pH units was spanned at x 100 km downwind and t = 2 hr. Environmentally significant pH's .5 for infrequent exposures were shown possible at X = 50 km and t 5 hr for the two least dispersive Titan 3 cases. Representative examples of downwind rainwater pH and G(X) are analyzed. Factors affecting the validity of the results are discussed.

Pellett, G. L.↗

Methodology to assess potential glint and glare hazards from concentrating solar power plants : analytical models and experimental validation.

With growing numbers of concentrating solar power systems being designed and developed, glint and glare from concentrating solar collectors and receivers is receiving increased attention as a potential hazard or distraction for motorists, pilots, and pedestrians. This paper provides analytical methods to evaluate the irradiance originating from specularly and diffusely reflecting sources as a function of distance and characteristics of the source. Sample problems are provided for both specular and diffuse sources, and validation of the models is performed via testing. In addition, a summary of safety metrics is compiled from the literature to evaluate the potential hazards of calculated irradiances from glint and glare. Previous safety metrics have focused on prevention of permanent eye damage (e.g., retinal burn). New metrics used in this paper account for temporary flash blindness, which can occur at irradiance values several orders of magnitude lower than the irradiance values required for irreversible eye damage.

14 SOLAR ENERGY↗

AN ANALYTICAL MODEL OF INTERSTELLAR GAS IN THE HELIOSPHERE TAILORED TO INTERSTELLAR BOUNDARY EXPLORER OBSERVATIONS

The stationary distribution of interstellar neutral gas in the heliosphere subject to solar gravity, solar radiation pressure, photoionization, and charge exchange is investigated analytically assuming ionization rates and radiation pressure that are proportional to R{sup -2}, where R is the heliocentric radius. The collisionless hyperbolic trajectories of the individual atoms including ionization losses are combined with Liouville's Theorem to construct the heliospheric phase-space distribution function of an interstellar gas species in the solar reference frame under the assumption that the distribution is a drifting Maxwellian at large distances from the Sun. The distribution is transformed to the Earth (essentially Interstellar Boundary Explorer (IBEX)) frame as a function of solar longitude. The expression is then tailored to the latitudinal scan of IBEX as a function of longitude using the fact that IBEX detects each atom close to perihelion in its hyperbolic orbit. The distribution is further adapted to IBEX by integrating the differential intensity over the entrance aperture solid angle of the IBEX-Lo collimator, and over energy to predict the IBEX count rate of helium. The major features of the predicted count rate are described, including a peak in longitude, a peak in latitude at each longitude, and the widths of the major peak in both latitude and longitude. Analytical formulae for these features are derived for comparison with IBEX observations in order to determine the temperature and bulk velocity of the gas in interstellar space. Based in part on these formulae, the results for helium are presented in the companion paper by Moebius et al.

79 ASTRONOMY AND ASTROPHYSICS↗

A predictive analytic model for the solar modulation of cosmic rays

An important factor limiting our ability to understand the production and propagation of cosmic rays pertains to the effects of heliospheric forces, commonly known as solar modulation. The solar wind is capable of generating time- and charge-dependent effects on the spectrum and intensity of low-energy (≲10 GeV) cosmic rays reaching Earth. Previous analytic treatments of solar modulation have utilized the force-field approximation, in which a simple potential is adopted whose amplitude is selected to best fit the cosmic-ray data taken over a given period of time. Making use of recently available cosmic-ray data from the Voyager 1 spacecraft, along with measurements of the heliospheric magnetic field and solar wind, we construct a time-, charge- and rigidity-dependent model of solar modulation that can be directly compared to data from a variety of cosmic-ray experiments. Here, we provide a simple analytic formula that can be easily utilized in a variety of applications, allowing us to better predict the effects of solar modulation and reduce the number of free parameters involved in cosmic-ray propagation models.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

TH-C-BRD-02: Analytical Modeling and Dose Calculation Method for Asymmetric Proton Pencil Beams

Purpose: A dynamic collimation system (DCS), which consists of two pairs of orthogonal trimmer blades driven by linear motors has been proposed to decrease the lateral penumbra in pencil beam scanning proton therapy. The DCS reduces lateral penumbra by intercepting the proton pencil beam near the lateral boundary of the target in the beam's eye view. The resultant trimmed pencil beams are asymmetric and laterally shifted, and therefore existing pencil beam dose calculation algorithms are not capable of trimmed beam dose calculations. This work develops a method to model and compute dose from trimmed pencil beams when using the DCS. Methods: MCNPX simulations were used to determine the dose distributions expected from various trimmer configurations using the DCS. Using these data, the lateral distribution for individual beamlets was modeled with a 2D asymmetric Gaussian function. The integral depth dose (IDD) of each configuration was also modeled by combining the IDD of an untrimmed pencil beam with a linear correction factor. The convolution of these two terms, along with the Highland approximation to account for lateral growth of the beam along the depth direction, allows a trimmed pencil beam dose distribution to be analytically generated. The algorithm was validated by computing dose for a single energy layer 5×5 cm{sup 2} treatment field, defined by the trimmers, using both the proposed method and MCNPX beamlets. Results: The Gaussian modeled asymmetric lateral profiles along the principal axes match the MCNPX data very well (R{sup 2}≥0.95 at the depth of the Bragg peak). For the 5×5 cm{sup 2} treatment plan created with both the modeled and MCNPX pencil beams, the passing rate of the 3D gamma test was 98% using a standard threshold of 3%/3 mm. Conclusion: An analytical method capable of accurately computing asymmetric pencil beam dose when using the DCS has been developed.

07 ISOTOPE AND RADIATION SOURCES↗

Skewering the silos: using Brick to enable portable analytics, modeling and controls in buildings

Nearly all large commercial buildings have heating, ventilation and air conditioning (HVAC) systems, lighting systems, safety and other systems controlled by a computer—a dedicated server with a building energy management system (BMS). However, these BMSs are proprietary with each building’s assets (that is, fans, valves, pumps, and their setpoints) named and coded uniquely by the BMS vendor or engineer; building analytics and control algorithms are written specific to the assets and the building. Thus, any control updates or analytics to improve building performance—especially critical to reduce greenhouse emissions or improve load flexibility—are labor intensive and costly. The Brick schema was developed so the same analysis or control algorithms can work on a variety of buildings if each is digitally represented in a Brick data model. The goal of this project was to further the development of Brick to extend it beyond an academic project with demonstrated success in a small field study, to a practical choice for industrial and commercial stakeholders seeking to realize value from building data. To do this, we executed four objectives: (1) expand the Brick schema including its modeling capabilities and vocabulary, (2) develop tools for integrating Brick with existing digital technologies and representations in buildings, (3) develop an open-source analytics platform to facilitate use of Brick in delivering data value, and (4) demonstrate Brick-driven analytics and controls in real settings.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Matrix perturbation for analytical model improvement

A matrix perturbation method is proposed to calculate the Jacobian matrix and to compute the new eigendata for the parameter estimation procedure. The advantages of the method are the applicability to large complex structures without knowing the analytical expressions for the mass and stiffness matrices, and a cost effective approach for the re-computation of the eigendata. This method also allows the use of other measurements such as modal forces, kinetic energy distribution, and strain energy distributions in the estimation procedure. A realistic sample problem is presented to demonstrate the effectiveness of the proposed method.

Chen, J. C.↗

Analytical model for electromagnetic cascades in rotating electric field

Electromagnetic cascades attract a lot of attention as an important quantum electrodynamics effect that will reveal itself in various electromagnetic field configurations at ultrahigh intensities. We study cascade dynamics in rotating electric field analytically and numerically. The kinetic equations for the electron-positron plasma and gamma-quanta are formulated. The scaling laws are derived and analyzed. For the cascades arising far above the threshold the dependence of the cascade parameters on the field frequency is derived. The spectra of high-energy cascade particles are calculated. The analytical results are verified by numerical simulations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Analytical Model for Atomic Relaxation in Twisted Moiré Materials

By virtue of being atomically thin, the electronic properties of heterostructures built from two-dimensional materials are strongly influenced by atomic relaxation. The atomic layers behave as flexible membranes rather than rigid crystals. Here we develop an analytical theory of lattice relaxation in twisted moiré materials. We obtain analytical results for the lattice displacements and corresponding pseudo gauge fields, as a function of twist angle. We benchmark our results for twisted bilayer graphene and twisted WSe 2 bilayers using large-scale molecular dynamics simulations. Our single-parameter theory is valid in graphene bilayers for twist angles 𝜃 ≳ 0.7°, and in twisted WSe 2 for 𝜃 ≳ 1.6°. Furthermore, we also investigate how relaxation alters the electronic structure in twisted bilayer graphene, providing a simple extension to the continuum model to account for lattice relaxation.

36 MATERIALS SCIENCE↗

Analytical models of axisymmetric reaction–diffusion phenomena in composite media

Reaction–diffusion equations describe a number of physical, chemical, and biological phenomena, many of which occur in composite environments with piece-wise constant diffusion coefficients. In this work, we develop semi-analytical solutions of axisymmetric reaction–diffusion equations with first-order reaction kinetics and continuous transient boundary conditions. These solutions are directly applicable to heat conduction in composite media with transient boundary conditions and heat generation. The solutions lose their robustness in the long time regime, when the Laplace variable tends to zero. Lastly, this limitation is overcome by the use of corresponding steady-state solutions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗