Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Wind forecasting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2019

Crossing Multiple Gray Zones in the Transition from Mesoscale to Microscale Simulation over Complex Terrain

This review paper explores the field of mesoscale to microscale modeling over complex terrain as it traverses multiple so-called gray zones. In an attempt to bridge the gap between previous large-scale and small-scale modeling efforts, atmospheric simulations are being run at an unprecedented range of resolutions. The gray zone is the range of grid resolutions where particular features are neither subgrid nor fully resolved, but rather are partially resolved. The definition of a gray zone depends strongly on the feature being represented and its relationship to the model resolution. This paper explores three gray zones relevant to simulations over complex terrain: turbulence, convection, and topography. Taken together, these may be referred to as the gray continuum. The focus is on horizontal grid resolutions from ∼10 km to ∼10 m. In each case, the challenges are presented together with recent progress in the literature. A common theme is to address cross-scale interaction and scale-awareness in parameterization schemes. How numerical models are designed to cross these gray zones is critical to complex terrain applications in numerical weather prediction, wind resource forecasting, and regional climate modeling, among others.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1982

Integration of Wind Turbine Generation (WTG) into utility generating systems

In order to obtain information required for the economical integration of wind turbine generation into utility systems, performance simulations of the MOD-2 turbine were conducted. The sensitivity of the utility-cost-of-generation to wind turbine performance models and the accuracy of wind velocity forecasts was analyzed. Four different simulation methods were used and the characteristics of each are discussed.

Mccabe, T. F.↗
NASA NTRS1986

Ground-based time-guidance algorithm for control of airplanes in a time-metered air traffic control environment: A piloted simulation study

The rapidly increasing costs of flight operations and the requirement for increased fuel conservation have made it necessary to develop more efficient ways to operate airplanes and to control air traffic for arrivals and departures to the terminal area. One concept of controlling arrival traffic through time metering has been jointly studied and evaluated by NASA and ONERA/CERT in piloted simulation tests. From time errors attained at checkpoints, airspeed and heading commands issued by air traffic control were computed by a time-guidance algorithm for the pilot to follow that would cause the airplane to cross a metering fix at a preassigned time. These tests resulted in the simulated airplane crossing a metering fix with a mean time error of 1.0 sec and a standard deviation of 16.7 sec when the time-metering algorithm was used. With mismodeled winds representing the unknown in wind-aloft forecasts and modeling form, the mean time error attained when crossing the metering fix was increased and the standard deviation remained approximately the same. The subject pilots reported that the airspeed and heading commands computed in the guidance concept were easy to follow and did not increase their work load above normal levels.

Knox, C. E.↗
NASA NTRS1998

The NASA-Langley Wake Vortex Modelling Effort in Support of an Operational Aircraft Spacing System

Two numerical modelling efforts, one using a large eddy simulation model and the other a numerical weather prediction model, are underway in support of NASA's Terminal Area Productivity program. The large-eddy simulation model (LES) has a meteorological framework and permits the interaction of wake vortices with environments characterized by crosswind shear, stratification, humidity, and atmospheric turbulence. Results from the numerical simulations are being used to assist in the development of algorithms for an operational wake-vortex aircraft spacing system. A mesoscale weather forecast model is being adapted for providing operational forecast of winds, temperature, and turbulence parameters to be used in the terminal area. This paper describes the goals and modelling approach, as well as achievements obtained to date. Simulation results will be presented from the LES model for both two and three dimensions. The 2-D model is found to be generally valid for studying wake vortex transport, while the 3-D approach is necessary for realistic treatment of decay via interaction of wake vortices and atmospheric boundary layer turbulence. Meteorology is shown to have an important affect on vortex transport and decay. Presented are results showing that wake vortex transport is unaffected by uniform fog or rain, but wake vortex transport can be strongly affected by nonlinear vertical change in the ambient crosswind. Both simulation and observations show that atmospheric vortices decay from the outside with minimal expansion of the core. Vortex decay and the onset three-dimensional instabilities are found to be enhanced by the presence of ambient turbulence.

Proctor, Fred H.↗
NASA NTRS2004

Characterizing the Severe Turbulence Environments Associated With Commercial Aviation Accidents: A Real-Time Turbulence Model (RTTM) Designed for the Operational Prediction of Hazardous Aviation Turbulence Environments

Real-time prediction of environments predisposed to producing moderate-severe aviation turbulence is studied. We describe the numerical model and its postprocessing system designed for said prediction of environments predisposed to severe aviation turbulence as well as presenting numerous examples of its utility. The numerical model is MASS version 5.13, which is integrated over three different grid matrices in real time on a university work station in support of NASA Langley Research Center s B-757 turbulence research flight missions. The postprocessing system includes several turbulence-related products, including four turbulence forecasting indices, winds, streamlines, turbulence kinetic energy, and Richardson numbers. Additionally, there are convective products including precipitation, cloud height, cloud mass fluxes, lifted index, and K-index. Furthermore, soundings, sounding parameters, and Froude number plots are also provided. The horizontal cross-section plot products are provided from 16 000 to 46 000 ft in 2000-ft intervals. Products are available every 3 hours at the 60- and 30-km grid interval and every 1.5 hours at the 15-km grid interval. The model is initialized from the NWS ETA analyses and integrated two times a day.

Kaplan, Michael L.↗
DOE OSTI2019

Short-Term Forecasting Across a Network for the Autonomous Wind Farm: Preprint

In an autonomous wind farm, turbines will use information from nearby turbines to achieve wind farm-level objectives such as optimizing the overall performance of a wind farm, ensuring resiliency when other sensors fail, and adapting to changing local conditions. In this paper, the wind farm can be modeled as a network within which turbines (nodes) share information across designated communication channels, with a focus on turbines at the outside of the wind farm capturing local effects and sharing that information with downstream turbines. Understanding of varied inflow conditions can be especially important in complex terrain. This information can be used to monitor turbines, self-organize turbines into groups, and predict the power performance of a wind farm. In particular, this paper describes an autonomous wind farm that incorporates information from local sensors in real time to predict wind speed and wind direction at each turbine over a short-term horizon. Results indicate that the estimate of wind direction can be used to improve the knowledge of the wind speed and direction over the persistence method on a 10- 15-minute time horizon. These short-term forecasts can also be used to facilitate advanced control methods such as feedforward control within a wind farm.

17 WIND ENERGY↗
DOE OSTI2019

Short-Term Forecasting Across a Network for the Autonomous Wind Farm

In an autonomous wind farm, turbines will use information from nearby turbines to achieve wind farm-level objectives such as optimizing the overall performance of a wind farm, ensuring resiliency when other sensors fail, and adapting to changing local conditions. In this paper, the wind farm can be modeled as a network within which turbines (nodes) share information across designated communication channels, with a focus on turbines at the outside of the wind farm capturing local effects and sharing that information with downstream turbines. Understanding of varied inflow conditions can be especially important in complex terrain. This information can be used to monitor turbines, self-organize turbines into groups, and predict the power performance of a wind farm. In particular, this paper describes an autonomous wind farm that incorporates information from local sensors in real time to predict wind speed and wind direction at each turbine over a short-term horizon. Results indicate that the estimate of wind direction can be used to improve the knowledge of the wind speed and direction over the persistence method on a 10-15-minute time horizon. These short-term forecasts can also be used to facilitate advanced control methods such as feedforward control within a wind farm.

17 WIND ENERGY↗
NASA NTRS2014

The Transition of Atmospheric Infrared Sounder Total Ozone Products to Operations

The National Aeronautics and Space Administration Short-term Prediction Research and Transition Center (NASA SPoRT) has transitioned a total column ozone product from the Atmospheric Infrared Sounder (AIRS) retrievals to the Weather Prediction Center and Ocean Prediction Center. The total column ozone product is used to diagnose regions of warm, dry, ozone-rich, stratospheric air capable of descending to the surface to create high-impact non-convective winds. Over the past year, forecasters have analyzed the Red, Green, Blue (RGB) Air Mass imagery in conjunction with the AIRS total column ozone to aid high wind forecasts. One of the limitations of the total ozone product is that it is difficult for forecasters to determine whether elevated ozone concentrations are related to stratospheric air or climatologically high values of ozone in certain regions. During the summer of 2013, SPoRT created an AIRS ozone anomaly product which calculates the percent of normal ozone based on a global stratospheric ozone mean climatology. With the knowledge that ozone values 125 percent of normal and greater typically represent stratospheric air; the anomaly product can be used with the total column ozone product to confirm regions of stratospheric air. This paper describes the generation of these products along with forecaster feedback concerning the use of the AIRS ozone products in conjunction with the RGB Air Mass product to access the utility and transition of the products.

Berndt, E. B.↗
NASA NTRS2014

The Transition of Atmospheric Infrared Sounder Total Ozone Products to Operations

The National Aeronautics and Space Administration Short-term Prediction Research and Transition Center (NASA SPoRT) has transitioned a total column ozone product from the Atmospheric Infrared Sounder (AIRS) retrievals to the Weather Prediction Center and Ocean Prediction Center. The total column ozone product is used to diagnose regions of warm, dry, ozone-rich, stratospheric air capable of descending to the surface to create high-impact non-convective winds. Over the past year, forecasters have analyzed the Red, Green, Blue (RGB) Air Mass imagery in conjunction with the AIRS total column ozone to aid high wind forecasts. One of the limitations of the total ozone product is that it is difficult for forecasters to determine whether elevated ozone concentrations are related to stratospheric air or climatologically high values of ozone in certain regions. During the summer of 2013, SPoRT created an AIRS ozone anomaly product which calculates the percent of normal ozone based on a global stratospheric ozone mean climatology. With the knowledge that ozone values 125 percent of normal and greater typically represent stratospheric air; the anomaly product can be used with the total column ozone product to confirm regions of stratospheric air. This paper describes the generation of these products along with forecaster feedback concerning the use of the AIRS ozone products in conjunction with the RGB Air Mass product to access the utility and transition of the products.

Berndt, Emily↗
DOE OSTI2023

Measurements and Model Improvement: Insight into NWP Model Error Using Doppler Lidar and Other WFIP2 Measurement Systems

Abstract Doppler-lidar wind-profile measurements at three sites were used to evaluate NWP model errors from two versions of NOAA’s 3-km-grid HRRR model, to see whether updates in the latest version 4 reduced errors when compared against the original version 1. Nested (750-m grid) versions of each were also tested to see how grid spacing affected forecast skill. The measurements were part of the field phase of the Second Wind Forecasting Improvement Project (WFIP2), an 18-month deployment into central Oregon–Washington, a major wind-energy-producing region. This study focuses on errors in simulating marine intrusions, a summertime, 600–800-m-deep, regional sea-breeze flow found to generate large errors. HRRR errors proved to be complex and site dependent. The most prominent error resulted from a premature drop in modeled marine-intrusion wind speeds after local midnight, when lidar-measured winds of greater than 8 m s −1 persisted through the next morning. These large negative errors were offset at low levels by positive errors due to excessive mixing, complicating the interpretation of model “improvement,” such that the updates to the full-scale versions produced mixed results, sometimes enhancing but sometimes degrading model skill. Nesting consistently improved model performance, with version 1’s nest producing the smallest errors overall. HRRR’s ability to represent the stages of sea-breeze forcing was evaluated using radiation budget, surface-energy balance, and near-surface temperature measurements available during WFIP2. The significant site-to-site differences in model error and the complex nature of these errors mean that field-measurement campaigns having dense arrays of profiling sensors are necessary to properly diagnose and characterize model errors, as part of a systematic approach to NWP model improvement. Significance Statement Dramatic increases in NWP model skill will be required over the coming decades. This paper describes the role of major deployments of accurate profiling sensors in achieving that goal and presents an example from the Second Wind Forecast Improvement Program (WFIP2). Wind-profile data from scanning Doppler lidars were used to evaluate two versions of HRRR, the original and an updated version, and nested versions of each. This study focuses on the ability of updated HRRR versions to improve upon predicting a regional sea-breeze flow, which was found to generate large errors by the original HRRR. Updates to the full-scale HRRR versions produced mixed results, but the finer-mesh versions consistently reduced model errors.

Meteorology & Atmospheric Sciences↗
NASA NTRS2002

Impact of Quikscat Data on Numerical Weather Prediction

One of the important applications of satellite surface wind observations is to increase the accuracy of weather analyses and forecasts. Satellite surface wind data can improve numerical weather prediction (NWP) model forecasts by contributing to improved analyses of the surface wind field and air sea fluxes. Through the data assimilation process,these data can also improve atmospheric mass and motion fields in the free atmosphere above the surface. The SeaWinds scatterometer on the QuikScat satellite was launched in July 1999 and represented a dramatic departure in design from the other scatterometer instruments launched during the past decade (ERS-1,2 and NSCAT). The NASA Data Assimilation Office (DAO) was the first data assimilation center to assimilate QuikScat Seawinds data and evaluate their impact on numerical weather prediction. Following the launch of QuikScat, a detailed evaluation of the initial surface wind data sets was performed as part of a collaborative project between the Environmental Modeling Center of NCEP, NESDIS and the DAO. More recently, the impact of Quikscat data was evaluated in detailed experiments using the NCEP operational data assimilation system. As a result of the beneficial impact obtained, NCEP began operational utilization of Quikscat data. Results from these experiments as well as recent DAO assimilation experiments showing the impact of Quikscat data on stratospheric analyses and forecasts will be presented at the meeting.

Atlas, Robert↗
NASA NTRS2017

Global Assimilation of X Project Loon Stratospheric Balloon Observations

Project Loon has an overall goal of providing worldwide internet coverage using a network of long-duration super-pressure balloons. Beginning in 2013, Loon has launched over 1600 balloons from multiple tropical and middle latitude locations. These GPS tracked balloon trajectories provide lower stratospheric wind information over the oceans and remote land areas where traditional radiosonde soundings are sparse, thus providing unique coverage of lower stratospheric winds. To fully investigate these Loon winds we: 1) compare the Loon winds to winds produced by a global data assimilation system (DAS: NASA GEOS) and 2) assimilate the Loon winds into the same comprehensive DAS. Results show that in middle latitudes the Loon winds and DAS winds agree well and assimilating the Loon winds have only a small impact on short-term forecasting of the Loon winds, however, in the tropics the loon winds and DAS winds often disagree substantially (8 m/s or more in magnitude) and in these cases assimilating the loon winds significantly improves the forecast of the loon winds. By highlighting cases where the Loon and DAS winds differ, these results can lead to improved understanding of stratospheric winds, especially in the tropics.

Loo↗
DOE OSTI2021

Observations and simulations of a wind farm modifying a thunderstorm outflow boundary

Abstract. On 18 June 2019, National Weather Service (NWS) radar reflectivity data indicated the presence of thunderstorm-generated outflow propagating east-southeastward near Lubbock, Texas. A section of the outflow boundary encountered a wind farm and then experienced a notable reduction in ground-relative velocity, suggesting that interactions with the wind farm impacted the outflow boundary progression. We use the Weather Research and Forecasting model and its wind farm parameterization to address the extent to which wind farms can modify the near-surface environment of thunderstorm outflow boundaries. We conduct two simulations of the June 2019 outflow event: one containing the wind farm and one without. We specifically investigate the outflow speed of the section of the boundary that encounters the wind farm and the associated impacts on near-surface wind speed, moisture, temperature, and changes to precipitation features as the storm and associated outflow pass over the wind farm domain. The NWS radar and nearby West Texas Mesonet surface stations provide observations for validation of the simulations. The presence of the wind farm in the simulation clearly slows the progress of the outflow boundary by over 20 km h -1 , similar to what was observed. Simulated perturbations of surface wind speed, temperature, and moisture associated with outflow passage were delayed by up to 6 min when the wind farm was present in the simulation compared to the simulation without the wind farm. However, impacts on precipitation were localized and transient, with no change to total accumulation across the domain.

17 WIND ENERGY↗
NASA NTRS1965

Oceanographic forecasting

Obtaining low level wind information and mapping sharp horizontal thermal gradients at surface for oceanographic forecasting

THERMAL ENVIRONMENT↗
NASA NTRS1987

Medium-range numerical forecasts of atmospheric angular momentum

Forecasts of zonal wind fields produced by the medium-range forecast (MRF) model of the National Meteorological Center are used to create predictions of the atmosphere's angular momentum at lead times of 1-10 days. Based on momentum forecasts archived for the period December 1985-November 1986, it is found that, on average, the MRF exhibits positive skill relative to persistence-based forecasts at all lead times. Over the entire one-year study period, the improvement over persistence exceeds 20 percent for 2-6 day forecasts and remains as large as 10 percent even for 10-day forecasts. On the other hand, skill scores for the MRF momentum predictions vary considerably from month to month, and for a sizable fraction of the study period, the MRF is less skillful than persistence.

Rosen, Richard D.↗
NASA NTRS1990

Forecasting atmospheric angular momentum and length-of-day using operational meteorological models

Forecasts of zonal wind fields produced by the medium-range forecast model of the U.S. National Meteorological Center are used to create predictions of the atmosphere's angular momentum at lead times of 1-10 days. The skill of these forecasts, which are of interest to those concerned with monitoring changes in the length-of-day for navigational purposes, is assessed, and the regions in the atmosphere that contribute most importantly to forecast errors are identified.

Rosen, R. D.↗