Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WORKING CONDITIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Boride-Carbon Hybrid Technology for Ultra-Wear and Corrosive Conditions

This work discusses a study on a surface treatment for creating extremely durable low-friction, wear and corrosion-resistant surfaces for tribological components in harsh conditions. A duplex surface treatment was developed that combines the advantages of ultra-fast electrochemical boriding with those of hard tetrahedral amorphous carbon coatings. The friction and wear properties of the duplex treatment are compared to the boride-only treatment of AISI 1045 steel, while corrosion and contact fatigue behaviors of the duplex layer are compared to that of the single-layer carbon coating on low carbon steel. The duplex treatment yields wear rates as low as 6 × 10−8 mm3·N−1·m−1 and a coefficient of friction of 0.14 when tested against a steel counter face. The contact fatigue impact tests reveal that the high hardness of 1200 HV0.05 of the borided layer in the duplex treatment leads to higher resistance against indentation but is accompanied by a higher incidence of crack initiation, being in good agreement with the finite-element modeling of nanoindentation results. The duplex coatings exhibit resistance to pinhole corrosion as evidenced by a 3 h exposure to 15% HCl at room temperature.

36 MATERIALS SCIENCE↗

Designing for human presence in space: An introduction to environmental control and life support systems

Human exploration and utilization of space requires habitats to provide appropriate conditions for working and living. These conditions are provided by environmental control and life support systems (ECLSS) that ensure appropriate atmosphere composition, pressure, and temperature; manage and distribute water, process waste matter, provide fire detection and suppression; and other functions as necessary. The functions that are performed by ECLSS are described and basic information necessary to design an ECLSS is provided. Technical and programmatic aspects of designing and developing ECLSS for space habitats are described including descriptions of technologies, analysis methods, test requirements, program organization, documentation requirements, and the requirements imposed by medical, mission, safety, and system needs. The design and development process is described from initial trade studies through system-level analyses to support operation. ECLSS needs for future space habitats are also described. Extensive listings of references and related works provide sources for more detailed information on each aspect of ECLSS design and development.

Wieland, Paul↗

ABAKO/RAPCAL: A Flexible Computational Package to Perform Radiative Properties Calculations and Diagnostics in a Wide Range of Plasma Conditions

This work describes ABAKO/RAPCAL, a flexible computational package for the study of population kinetics and radiative properties of non-equilibrium plasmas in a wide range of physical conditions. The code was developed looking for an optimal compromise between accuracy and computational cost. ABAKO/RAPCAL assembles a set of simple analytical models which yield substantial savings of computer resources, but yet still providing good comparisons with more elaborated codes and experimental data. Here we present some results to show the ABAKO/RAPCAL capabilities to calculate the charge distribution and radiative properties of both low- and high-Z plasmas. Finally, an application for K-shell spectroscopic determination of the electron temperature and density of laser-produced plasmas is also shown.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Designing For Human Presence in Space: An Introduction to Environmental Control and Life Support Systems (ECLSS)

Human exploration and utilization of space requires habitats to provide appropriate conditions for working and living. These conditions are provided by environmental control and life support systems (ECLSS) that ensure appropriate atmosphere composition, pressure, and temperature; manage and distribute water, process waste matter, provide fire detection and suppression; and other functions as necessary. The tables in appendix I of NASA RP 1324 "Designing for Human Presence in Space" summarize the life support functions and processes used onboard U.S. and U.S.S.R/Russian space habitats. These tables have been updated to include information on thermal control methods and to provide additional information on the ECLS systems.

Wieland, P. O.↗

Investigation of Transmission Warming Technologies at Various Ambient Conditions

This work details two approaches for evaluating transmission warming technology: experimental dynamometer testing and development of a simplified transmission efficiency model to quantify effects under varied real world ambient and driving conditions. Two vehicles were used for this investigation: a 2013 Ford Taurus and a 2011 Ford Fusion. The Taurus included a production transmission warming system and was tested over hot and cold ambient temperatures with the transmission warming system enabled and disabled. A robot driver was used to minimize driver variability and increase repeatability. Additionally the Fusion was tested cold and with the transmission pre-heated prior to completing the test cycles. These data were used to develop a simplified thermally responsive transmission model to estimate effects of transmission warming in real world conditions. For the Taurus, the fuel consumption variability within one standard deviation was shown to be under 0.5% for eight repeat Urban Dynamometer Driving Cycles (UDDS). These results were valid with the transmission warming system active or passive. Using the transmission warming system under 22 degrees C ambient temperature, fuel consumption reduction was shown to be 1.4%. For the Fusion, pre-warming the transmission reduced fuel consumption 2.5% for an urban drive cycle at -7 degrees C ambient temperature, with 1.5% of the 2.5% gain associated with the transmission, while consumption for the US06 test was shown to be reduced by 7% with 5.5% of the 7% gain associated with the transmission. It was found that engine warming due to conduction between the pre-heated transmission and the engine resulted in the remainder of the benefit. For +22 degrees C ambient tests, the pre-heated transmission was shown to reduce fuel consumption approximately 1% on an urban cycle, while no benefit was seen for the US06 cycle. The simplified modeling results showed gains in efficiency ranging from 0-1.5% depending on the ambient temperature and drive cycle.

33 ADVANCED PROPULSION SYSTEMS↗

The impedance problem of wave diffraction by a strip with higher order boundary conditions

This work is devoted to analyse an impedance boundary-transmission problem for the Helmholtz equation originated by a problem of wave diffraction by an infinite strip with higher order imperfect boundary conditions. A constructive approach of operator relations is built, which allows a transparent interpretation of the problem in an operator theory framework. In particular, different types of operator relations are exhibited for different types of operators acting between Lebesgue and Sobolev spaces on a finite interval and the positive half-line. All this has consequences in the understanding of the structure of this type of problems. In particular, a Fredholm characterization of the problem is obtained in terms of the initial space order parameters. At the request of the author and the Proceedings Editor the above article has been replaced with a corrected version. The original PDF file supplied to AIP Publishing contained an error in the title of the article. The original title appeared as: 'The Impedance Problem of Wave Diffraction by a trip with Higher Order Boundary Conditions.' This article has been replaced and the title now appears correctly online. The corrected article was published on 8 November 2013.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

In Situ Laser Induced Florescence Measurements of Fuel Dilution from Low Load to Stochastic Pre Ignition Prone Conditions

This work employs a novel laser induced fluorescence (LIF) diagnostic to measure fuel dilution in a running single cylinder research engine operated at stochastic pre ignition (SPI) and non-SPI prone conditions. Measurements of LIF based fuel dilution are quantified over a range of engine loads and fuel injection timings for two fuels. The in situ LIF measurements of fuel/lubricant interactions illustrate regions of increased fuel dilution from fuel-wall interactions and is believed to be a fundamental underpinning to generating top ring zone liquid conditions conducive to SPI. Furthermore, a novel level of dye doped in the fuel, between 50 to 500 ppm was used as the fluorescence source, at engine operating speed of 2000r/min from 5 to 18 bar of IMEPg injection timings was swept for two fuels of varying volatility. The direct real time LIF measurements highlight that there are non-linear trends in fuel dilution beyond simple dependencies of fuel volatility, injection duration or injection timing, suggesting that further understanding of spray interaction with engine surfaces and the turbulent field are needed to quantify fuel dilution effects that are conducive to SPI. Moreover, results show the potential of this diagnostic technique as an additional tool for quantifying spray and fuel mixing in fundamental studies deployable across a variety of engine loads from law to full load.

47 OTHER INSTRUMENTATION↗

Speciation, behaviour, and fate of mercury under oxy-fuel combustion conditions

The work presented here reports the first study in which the speciation, behaviour and fate of mercury (Hg) have been evaluated under oxy-fuel combustion at the largest oxy-Pulverised Coal Combustion (oxy-PCC) demonstration plant to date during routine operating conditions and partial exhaust flue gas re-circulation to the boiler. The effect of the CO{sub 2}-rich flue gas re-circulation on Hg has also been evaluated. Results reveal that oxy-PCC operational conditions play a significant role on Hg partitioning and fate because of the continuous CO{sub 2}-rich flue gas re-circulations to the boiler. Mercury escapes from the cyclone in a gaseous form as Hg{sup 2+} (68%) and it is the prevalent form in the CO{sub 2}-rich exhaust flue gas (99%) with lower proportions of Hg{sup 0} (1.3%). The overall retention rate for gaseous Hg is around 12%; Hg{sup 0} is more prone to be retained (95%) while Hg{sup 2+} shows a negative efficiency capture for the whole installation. The negative Hg{sup 2+} capture efficiencies are due to the continuous CO{sub 2}-rich exhaust flue gas recirculation to the boiler with enhanced Hg contents. Calculations revealed that 44 mg of Hg were re-circulated to the boiler as a result of 2183 re-circulations of CO{sub 2}-rich flue gas. Especial attention must be paid to the role of the CO{sub 2}-rich exhaust flue gas re-circulation to the boiler on the Hg enrichment in Fly Ashes (FAs). - Highlights: • The fate of gaseous Hg has been evaluated under oxy-fuel combustion. • The Hg oxidation process is enhanced in CO{sub 2}-rich flue gas recirculation. • Hg{sup 2+} is the prevalent gas species in the CO{sub 2}-rich exhaust flue gas. • Hg{sup 2+}{sub (g)} shows a negative efficiency capture for the whole installation. • Especial attention must be paid to the Hg enrichment in Fly Ashes.

54 ENVIRONMENTAL SCIENCES↗

Theoretical Investigation of Microstructure Evolution and Deformation of Zirconium Under Cascade Damage Conditions

This work is based on our reaction-diffusion model of radiation growth of Zr-based materials proposed recently in "On the Origin of Radiation Growth of HCP Crystals". In "On the Origin of Radiation Growth of HCP Crystals", the equations for the strain rates in unloaded pure crystal under cascade damage conditions of, e.g., neutron or heavy-ion irradiation were derived as functions of dislocation densities, which include contributions from dislocation loops, and spatial distribution of their Burgers vectors. The model takes into account the intra-cascade clustering of self-interstitial atoms and their one-dimensional diffusion; explains the growth stages, including the break-away growth of pre-annealed samples; and accounts for some striking observations, such as of negative strain in prismatic direction, and co-existence of vacancy- and interstitial-type prismatic loops. In this report, the change of dislocation densities due to accumulation of sessile dislocation loops is taken into account explicitly to investigate the dose dependence of radiation growth. The dose dependence of climb rates of dislocations is calculated, which is important for the climb-induced glide model of radiation creep. The results of fitting the model to available experimental data and some numerical calculations of the strain behavior of Zr for different initial dislocation structures are presented and discussed. The computer code RIMD-ZR.V1 (Radiation Induced Microstructure and Deformation of Zr) developed is described and attached to this report.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Dielectric properties in microwave remote plasma sustained in argon: Expanding plasma conditions

This work is devoted to the study of the relative permittivity in argon expanding plasma produced below a microwave discharge sustained in a quartz tube and working at 2.45 GHz. We discuss results and explain the microwave propagation within the reactor, outside the quartz tube. It is shown that at low pressures (133 Pa) and at powers ranging from 100 W to 400 W, the wave frequency remains lower than the plasma frequency anywhere in the expanding plasma. Under these conditions, the real part of the relative permittivity is negative and the wave is reflected. Surprisingly, in these conditions, the plasma is produced inside and outside the quartz tube, below the wave launcher. This effect can be explained considering a surface wave propagating at the surface of the quartz tube then into the reactor, on the external surface of the expanding plasma below the quartz tube.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Probing Clustering Dynamics between Silicon and PAA or LiPAA Slurries under Processing Conditions

This work explores the complex interplay between slurry aggregation, agglomeration, and conformation (i.e., shape) of poly(acrylic acid) (PAA)- and lithiated PAA-based silicon slurries as a function of the shear rate and the resulting slurry homogeneity. These values were measured by small-angle neutron scattering (SANS) and rheology-coupled ultra-SANS at conditions relevant to battery electrode casting. Different binder solution preparation methods, either a ball milling (BM) process or a planetary centrifugal mixing (PCM) process, dramatically modify the resulting polymer dynamics and organization around a silicon material. This is due to the different energy profiles of mixing where the more violent and higher energy PCM causes extensive breakdown and reformation of the binder, which is now likely in a branched conformation, while the lower energy BM results in simply lower-molecular weight linear polymers. In conclusion, the breakdown and reorganization of the polymer structure affect silicon slurry homogeneity, which affects subsequent electrode architecture.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Generalized quantum Fokker-Planck equation for photoinduced nonequilibrium processes with positive definiteness condition

This work provides a detailed derivation of a generalized quantum Fokker-Planck equation (GQFPE) appropriate for photo-induced quantum dynamical processes. The path integral method pioneered by Caldeira and Leggett (CL) [Physica A 121, 587 (1983)] is extended by utilizing a nonequilibrium influence functional applicable to different baths for the ground and the excited electronic states. Both nonequilibrium and non-Markovian effects are accounted for consistently by expanding the paths in the exponents of the influence functional up to the second order with respect to time. This procedure results in approximations involving only single time integrations for the exponents of the influence functional but with additional time dependent boundary terms that have been ignored in previous works. The boundary terms complicate the derivation of a time evolution equation but do not affect position dependent physical observables or the dynamics in the steady state limit. For an effective density operator with the boundary terms factored out, a time evolution equation is derived, through short time expansion of the effective action and Gaussian integration in analytically continued complex domain of space. This leads to a compact form of the GQFPE with time dependent kernels and additional terms, which renders the resulting equation to be in the Dekker form [Phys. Rep. 80, 1 (1981)]. Major terms of the equation are analyzed for the case of Ohmic spectral density with Drude cutoff, which shows that the new GQFPE satisfies the positive definiteness condition in medium to high temperature limit. Steady state limit of the GQFPE is shown to approach the well-known expression derived by CL in the high temperature and Markovian bath limit and also provides additional corrections due to quantum and non-Markovian effects of the bath.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sensitivity of Turbine-Height Wind Speeds to Parameters in the Planetary Boundary-Layer Parametrization Used in the Weather Research and Forecasting Model: Extension to Wintertime Conditions

This work extends the model sensitivity analysis of Yang et al. (Boundary-Layer Meteorology, 2017, Vol. 162, 117-142) to include results for February 2011, in addition to May of the same year. We investigated the sensitivity of simulated hub-height wind speeds to the selection of 26 parameters applied in the Mellor-Yamada-Nakanishi-Niino (MYNN) planetary boundary-layer parameterization in the Weather Research and Forecasting (WRF) model, including parameters used to represent the dissipation of turbulence kinetic energy (TKE), Prandtl number (Pr), and turbulence length scales. Differences in the sensitivity of the ensemble of simulated wind speed to the various parameters can largely be explained by changes in the static stability. The largest monthly differences were found during the day, while the sensitivity to many of the parameters during the night were similar regardless of the month. This finding is consistent with an increased frequency of day-time stable conditions in February compared to May. The spatial variability of the sensitivity to TKE dissipation, Pr, and k can also be attributed to variability in the static stability across the domain at any point in time.

parametrization schemes, Parametric sensitivity, P↗

In situ monitoring of dislocation, twinning, and detwinning modes in an extruded magnesium alloy under cyclic loading conditions

This work investigates the microscopic deformation mechanisms of an extruded, precipitation-strengthened AZ80 magnesium (Mg) alloy subjected to strain-controlled low-cycle fatigue using in situ neutron diffraction measurements. Results demonstrate that the plastic deformation during cyclic loading is dominated by the alternating {10.2} extension twinning and detwinning mechanisms. The observed deformation mode is strongly texture and precipitate dependent. For the initial texture, the tested material has two major texture components which result in the occurrence of extension twinning during both compression and reverse tension in the first two cycles. The prolonged detwinning process in the following cycles is proposed to relieve the shear stress field of {00.2} grains, leading to the disappearance of twinning. The precipitation strengthening results in an increase of the critical resolved shear stress (CRSS) by similar to 33 MPa for the extension twinning in this AZ80 alloy. Here, the synergistic effects of the initial texture, precipitation strengthening, and load sharing of various grain families and phases contribute to the complicated evolution of dominant deformation mechanisms, among which elevated dislocation activities are believed to be responsible for the relatively poor low-cycle-fatigue lifetime when compared to other Mg alloys.

36 MATERIALS SCIENCE↗

Surface Structural and Chemical Evolution of Layered LiNi 0.8 Co 0.15 Al 0.05 O 2 (NCA) under High Voltage and Elevated Temperature Conditions

This work reports new insights into structural and chemical evolution of surface phases of LiNi 0.8 Co 0.15 Al 0.05 O 2 (NCA) held at constant high voltages (up to 4.75 V) as well as high temperatures (60 °C) by correlating crystal structure using high angle annular dark field scanning transmission electron microscopy (HAADF-STEM) imaging with chemistry using electron energy loss spectroscopy (EELS). We also followed the Al distribution within individual NCA particles by X-ray energy dispersive spectroscopy (EDS). The progression of these phases as a function of distance from the edge shows simultaneous evolution of crystal structures and chemistry from rocksalt to layered, forming a complete solid solution. We have also observed an extended disordered phase with rocksalt (Fm3m) symmetry in which quantitative electron energy loss spectroscopy reveals it to be an oxygen deficient cation disordered phase with chemical characteristics, as determined by EELS, similar to spinel. The formation of these disordered phases with cation and oxygen vacancies has been driven by surface oxygen loss caused by reactions with the electrolyte followed by cation migration from the octahedral 3a M (M = Ni, Co, Al) layer to the octahedral 3b Li layer. These surface rocksalt phases are not fully dense as they contain Al and Li as well as a high concentration of cation and oxygen vacancies. After discharge, Li is detected within these phases indicative that Li transport has occurred through these rocksalt phases. At 60 °C and 4.75 V a very large impedance rise is observed leading to complete cell irreversibility which is caused by significant metal dissolution from the cathode and formation of surface porosity. In the near surface region of some particles, a phase transformation from R3m (O3) to P3m1 (O1) is also observed which has become thermodynamically stable from complete delithiation as well as from local Al surface depletion.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Resolution of Ion Mobility Spectra for the Detection of Hazardous Substances in Real Sampling Conditions

This work presents the possibilities offered by a blind source separation method such Multivariate Curve Resolution- Alternating Least Squares (MCR-ALS) in the analysis of Ion Mobility Spectra (IMS). Two security applications are analyzed in this context: the detection of TNT both in synthetic and real samples. Results obtained show the possibilities offered by the direct analysis of the drift time spectra when an appropriate resolution method is used.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Method for conducting in situ high-temperature digital image correlation with simultaneous synchrotron measurements under thermomechanical conditions

This work presents a novel method of obtaining in situ strain measurements at high temperature by simultaneous digital image correlation (DIC), which provides the total strain on the specimen surface, and synchrotron x-ray diffraction (XRD), which provides lattice strains of crystalline materials. DIC at high temperature requires specialized techniques to overcome the effects of increased blackbody radiation that would otherwise overexpose the images. The technique presented herein is unique in that it can be used with a sample enclosed in an infrared heater, remotely and simultaneously with synchrotron XRD measurements. The heater included a window for camera access, and the light of the heater lamps is used as illumination. High-temperature paint is used to apply a random speckle pattern to the sample to allow the tracking of displacements and the calculation of the DIC strains. An inexpensive blue theatrical gel filter is used to block interfering visible and infrared light at high temperatures. This technique successfully produces properly exposed images at 870 °C and is expected to perform similarly at higher temperatures. The average strains measured by DIC were validated by an analytical calculation of the theoretical strain. Simultaneous DIC and XRD strain measurements of Inconel 718 (IN718) tensile test specimens were performed under thermal and mechanical loads and evaluated. Finally, this approach uses the fact that with DIC, the total strain is measured, including plastic strain, while with XRD, only elastic strain is captured. The observed differences were discussed with respect to the effective deformation mechanisms.

47 OTHER INSTRUMENTATION↗

On the mass transport properties of the GeSe-GeI4 system under normal and reduced gravity conditions

Previous work on the mass transport rate of the GeSe-GeI4 system has been reevaluated using the mass spectrometric results of Buchan and Rosenberger (1987), and considering the presence of GeSe(s) and GeSe2(s) phases in the source material. The present transport rate study confirms the previously derived dominance of the sublimation of GeSe at lower pressures of GeI4, and of chemical vapor transport at higher pressures of GeI4. It is noted that experimentally observed flux anomalies are model-independent.

Palosz, Witold↗