Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “WORK FUNCTIONS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Thermionic converter performance with oxide collectors

Thermionic converters using a variety of metal oxide collector surfaces have been fabricated and tested. Both work function and power output data are presented and evaluated. Oxides of barium, strontium, zinc, tungsten and titanium have been incorporated into a variable spacing converter. Tungsten oxide was found to give the highest converter performance and to furnish oxygen for the emitter at the same time. Oxygenated emitters operate at reduced cesium pressure with an increase in electrode spacing. Electron spectroscopy for chemical analysis (ESCA) performed on several tungsten oxide collectors showed cesium penetration of the oxide layer, possibly forming a cesium tungstate bronze. Titanium oxide showed high performance but did not furnish oxygen for the emitter; strontium oxide, in the form of a sprayed layer, appeared to dissociate in the presence of cesium. Sprayed coatings of barium and zinc oxides produced collector work functions of about 1.3 eV, but had excessive series resistance. Lanthanum hexaboride, in combination with oxygen introduced through a silver tube, and cesium produced a low work function collector and better than average performance.

Lieb, D.↗

On the charge neutrality level and the electronic properties of interphase boundaries in the layered ε-GaSe semiconductor

The height of the (Au, Pd, Pt, Cu, Ag, Sn, In, Al, Mg, Ca, Li, Cs)/GaSe(0001) Schottky barrier as a function of the metal work function and the energy-band offsets in InSe(0001)/GaSe(0001) and GaSe(0001)/Si(111) heteropairs are analyzed within the context of the concept of the charge neutrality level, CNL{sub vb}(GaSe) = E{sub v} + 0.83 eV, with consideration for partial screening of the interface electrostatic dipole by metal- or semiconductor-induced tunneling states at the GaSe(0001) surface.

36 MATERIALS SCIENCE↗

Out-of-core evaluations of a nonfueled and a UO2-fueled cylindrical thermionic converter.

Two cylindrical thermionic energy converters similar to those in a flashlight thermionic fuel element were tested electrically at the Jet Propulsion Laboratory. One converter was not fueled, but the other was fueled with UO2 imbedded in six pencil-lead-size holes in the emitter, which was made of rhenium. The nonfueled converters showed no change in its performance during 4000 hr of testing, whereas the output current of the UO2-fueled converter degraded 15% during 2400 hr of testing at 2000 K. Measurements on the UO2-fueled converter showed an increase in the collector work function and an increase in the bare emitter work function. The degradation appears to be caused primarily by foreign deposits on the collector, probably uranium that diffused from the UO2 fuel through the emitter.

Shimada, K.↗

Origin of enhanced field emission characteristics postplasma treatment of multiwalled carbon nanotube array

Field emission properties of chemical-vapor-deposition-grown multiwalled carbon nanotubes (MWCNTs) with plasma treatment have been investigated. Origin of the enhanced field emission current was interpreted in terms of surface morphology of MWCNTs, work function, field enhancement factor, and emission area. Contrary to the general belief, the change in the work function increased slightly with the plasma treatment time, whereas the field enhancement factor decreased. We found that the number of emittable MWCNTs played a dominant role in the current enhancement.

36 MATERIALS SCIENCE↗

Spacecraft surface charging as a function of material properties

Spacecraft material behavior plays a very important role in space missions. Spacecraft immersed in plasma get charged by absorbing plasma particles and by emitting electrons from spacecraft surfaces via photoelectron and secondary electron emission. Spacecraft charging depends heavily on material properties such as work function, secondary electron yield, dielectric constant, and electric conductivity among other. Material properties are typically assumed to be static in charging models. However, it is well known that this is not the case in space. This makes spacecraft charging predictions very challenging. Material properties are well characterized before the spacecraft is put in orbit through characterization in the lab under clean conditions. However, once in space, material properties change due to the harsh and very dynamic space environment. We present a new capability to predict material behavior in space from first-principles modeling. The ongoing effort seeks to couple material models, density functional theory (DFT) and molecular dynamic (MD) codes, with environment models, plasma kinetic codes. This preliminary study will show results of surface charging as a function of material work function, dielectric constant, and conductivity.

36 MATERIALS SCIENCE↗

HIGH-TEMPERATURE IONIZATION IN PROTOPLANETARY DISKS

We calculate the abundances of electrons and ions in the hot (≳500 K), dusty parts of protoplanetary disks, treating for the first time the effects of thermionic and ion emission from the dust grains. High-temperature ionization modeling has involved simply assuming that alkali elements such as potassium occur as gas-phase atoms and are collisionally ionized following the Saha equation. We show that the Saha equation often does not hold, because free charges are produced by thermionic and ion emission and destroyed when they stick to grain surfaces. This means the ionization state depends not on the first ionization potential of the alkali atoms, but rather on the grains’ work functions. The charged species’ abundances typically rise abruptly above about 800 K, with little qualitative dependence on the work function, gas density, or dust-to-gas mass ratio. Applying our results, we find that protoplanetary disks’ dead zone, where high diffusivities stifle magnetorotational turbulence, has its inner edge located where the temperature exceeds a threshold value ≈1000 K. The threshold is set by ambipolar diffusion except at the highest densities, where it is set by Ohmic resistivity. We find that the disk gas can be diffusively loaded onto the stellar magnetosphere at temperatures below a similar threshold. We investigate whether the “short-circuit” instability of current sheets can operate in disks and find that it cannot, or works only in a narrow range of conditions; it appears not to be the chondrule formation mechanism. We also suggest that thermionic emission is important for determining the rate of Ohmic heating in hot Jupiters.

79 ASTRONOMY AND ASTROPHYSICS↗

Adsorption dynamics and angular dependency of contaminants on Ru mirror surfaces

A real time contamination of the Ru surface and corresponding effect on its work function were studied using extreme ultraviolet photoelectron spectroscopy with a 13.5-nm wavelength of light. The change in work function indicates formation of molecular dipoles, oriented outward from the Ru surface. X-ray photoelectron spectroscopy investigations suggest variation in electromagnetic interaction with the components of the adsorbed foreign species when the emission angle from the target surface was changed from 0 deg. to 50 deg. ; H{sub 2}O and C-O{sub n} show a strong coupling at lower angles and OH dominates at higher angles, whereas carbon is found in the mid-range peaking at 30 deg. .

36 MATERIALS SCIENCE↗

Operando study of Pd(100) surface during CO oxidation using ambient pressure x-ray photoemission spectroscopy

The surface chemical states of Pd(100) during CO oxidation were investigated using ambient pressure x-ray photoelectron spectroscopy and mass spectroscopy. Under the reactant ratio of CO/O 2 = 0.1, i.e. an oxygen-rich reaction condition, the formation of surface oxides was observed with the onset of CO oxidation reaction at T = 525 K. As the reactant ratio (CO/O 2 ) increased from 0.1 to 1.0, ~ 90 % surface oxides remains on surface during the reaction. Upon the formation of surface oxides, the core level shift of oxygen gas phase peak was observed, indicating that change of surface work function. As CO oxidation takes places, i.e. making a transition from CO covered surface to the oxidic surface, the work functions of surface oxide on Pd(100) and Pt(110) display opposite behavior.

36 MATERIALS SCIENCE↗

Field emission characteristics from graphene on hexagonal boron nitride

An attempt has been made to utilize uniquely high electron mobility of graphene on hexagonal boron nitride (h-BN) to electron emitter. The field emission property of graphene/h-BN/Si structure has shown enhanced threshold voltage and emission current, both of which are key to develop novel vacuum nanoelectronics devices. The field emission property was discussed along with the electronic structure of graphene investigated by Fowler-Nordheim plot and ultraviolet photoelectron spectroscopy. The result suggested that transferring graphene on h-BN modified its work function, which changed field emission mechanism. Our report opens up a possibility of graphene-based vacuum nanoelectronics devices with tuned work function.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

The physical properties of Li-doped g-C{sub 3}N{sub 4} monolayer sheet investigated by the first-principles

Highlights: • Systematically research on Li-doped g-C{sub 3}N{sub 4} monolayer sheets by first-principles calculation. • Optimal dopant concentration for optical absorption is 7.12%. • Thermodynamics stability of the doped substrate g-C{sub 3}N{sub 4} decreased with Li dopant concentration increasing. • The values of work function Φ decreased monotonously with the increasing of Li dopant concentration. - Abstract: The geometric, electronic, optical properties, thermodynamic stability, and work function of Li-doped g-C{sub 3}N{sub 4} monolayer were investigated by the first-principles calculation. It was found that the Li atoms were preferentially substituted the open-hollow sites of g-C{sub 3}N{sub 4}. Interestingly, the “odd” number of Li doped g-C{sub 3}N{sub 4} showed metallic properties, while the “even” number of Li atoms widened the band gap of g-C{sub 3}N{sub 4}. The HOMO and LUMO distributions reveal that the active sites located at edge N and C atoms for both pristine and the Li-doped g-C{sub 3}N{sub 4}. In addition, thermodynamic analysis showed that the doped Li atoms reduced the thermodynamic stability of g-C{sub 3}N{sub 4} monolayer sheets.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Cesium-Coated Halide Perovskites as a Photocathode Material: Modeling Insights

Photocathodes emit electrons when illuminated, a process utilized across many technologies. Cutting-edge applications require a set of operating conditions that are not met with current photocathode materials. Meanwhile, halide perovskites have been studied extensively and have shown a lot of promise for a wide variety of optoelectronic applications. Well-documented halide perovskite properties such as inexpensive growth techniques, improved carrier mobility, low trap density, and tunable direct band gaps make them promising candidates for next-generation photocathode materials. In this study, we use density functional theory to explore the possible application of pure inorganic perovskites (CsPbBr 3 and CsPbI 3 ) as photocathodes. It is determined that the addition of a Cs coating improved the performance by lowering the work function anywhere between 1.5 and 3 eV depending on the material, crystal surface, and surface coverage. A phenomenological model, modified from that developed by Gyftopoulos and Levine, is used to predict the reduction in work function with Cs coverage. The results of this work aim to guide the further experimental development of Cs-coated halide perovskites for photocathode materials.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗

Scanning Kelvin Probe Force Microscopy and Density Functional Theory Studies on the Surface Potential of the Intermetallics in AA7075-T6 Alloys

The surface potentials of Mg{sub 2}Si and Al{sub 7}Cu{sub 2}Fe intermetallic particles in AA7075-T6 alloys were investigated by scanning Kelvin probe force microscopy (SKPFM) technique. The experimental surface potentials of Mg{sub 2}Si and Al{sub 7}Cu{sub 2}Fe intermetallic particles relative to Al matrix were ranging from − 368 to − 265 mV and 480–500 mV, respectively. A theoretical method for assessing relative nobility of intermetallics in Al alloys was discussed through first principle calculation. The work functions and surface energies of Mg{sub 2}Si and Al{sub 7}Cu{sub 2}Fe surfaces were calculated by using density functional theory (DFT) method. The results showed that work functions and surface energies of Mg{sub 2}Si and Al{sub 7}Cu{sub 2}Fe intermetallics were influenced by the orientations of crystal face and terminal types. At the oxygen coverage of 1/4 ML and 1 ML, the theoretical surface potential differences between Mg{sub 2}Si intermetallics and Al matrix were increased by 10–560 mV and 0–620 mV, while those between Al{sub 7}Cu{sub 2}Fe intermetallics and Al matrix were increased by 62–360 mV and 102–331 mV. For the adsorption of oxygen atom, theoretical surface potentials of Mg{sub 2}Si and Al{sub 7}Cu{sub 2}Fe intermetallics relative to Al matrix had a close agreement with the experimental surface potentials. It was verified that DFT method was a valuable theoretical approach to assess the relative nobility of different phases in alloys.

36 MATERIALS SCIENCE↗

An electronic criterion for assessing intrinsic brittleness of metallic glasses

Bulk metallic glasses (BMGs) are characterized by a number of remarkable physical and mechanical properties. Unfortunately, these same materials are often intrinsically brittle, which limits their utility. Consequently, considerable effort has been expended searching for correlations between the phenomenologically complex mechanical properties of metallic glasses and more basic properties, such correlations might provide insight into the structure and bonding controlling the deformation properties of BMGs. While conducting such a search, we uncovered a weak correlation between a BMG’s work function and its susceptibility to brittle behavior. We argue that the basis for this correlation is a consequence of a component of the work function – the surface dipole – and a fundamental bond property related to the shape of the charge density at a bond critical point. Together these observations suggest that simple first principle calculations might be useful in the search for tougher BMGs.

36 MATERIALS SCIENCE↗

Modelling graphene quantum dot functionalization via ethylene-dinitrobenzoyl

Ethylene-dinitrobenzoyl (EDNB) linked to graphene oxide has been shown to improve the performance of graphene/polymer organic photovoltaics. Its binding conformation on graphene, however, is not yet clear, nor have its effects on work function and optical absorption been explored more generally for graphene quantum dots. In this report, we clarify the linkage of EDNB to GQDs from first principles and show that the binding of the molecule increases the work function of graphene, while simultaneously modifying its absorption in the ultraviolet region.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Molecular dopants: Tools to control the electronic structure of metal halide perovskite interfaces

In the standard configurations of metal halide perovskite solar cell, the active layer, or absorber, follows a p-i-n or n-i-p electronic structure that is designed to enhance the separation and extraction of photo-induced charge carriers. The control of the Fermi level position across the film, between electron and hole transport layers, is therefore of paramount importance. Direct localized doping in metal halide perovskites being still elusive, the design of n-i-p and p-i-n structures has so far relied predominantly on surface and interface doping of the perovskite as well as on the control of the work function of the substrate and transport layers on which, or between which, the absorber is being placed. We provide here a short review of that work, emphasizing the fundamental studies of electronic structure performed on systems modified with organic molecular dopants. The review starts with a justification for the effectiveness of interface doping, based on the ability to move the Fermi level across the gap of the perovskite. We then review work done on the deposition of molecular oxidants and reductants on perovskite surfaces, including the mitigation of the surface states, and the impact of these dopants on energy level alignment with substrate and charge transport layers. The second part of the review focuses on the use of molecular dopants to either modify the work function of electron or hole transport layers to establish the boundary conditions for a p-i-n or n-i-p structure, or to enhance the conductivity of these layers in order to facilitate charge carrier extraction. Final considerations are also given on recent work on bulk doping of the perovskite layer with molecular dopants.

14 SOLAR ENERGY↗

Electrostatic Nature of Size Dependences of Adsorption Properties of Ytterbium Nanofilms Grown on the Surface of Silicon: the CO–Yb–Si(111) System

The adsorption of CO molecules onto ytterbium nanofilms with their thickness varying from 1 to 16 monolayers is studied. The dependences of the number of adsorbed CO molecules (adsorption isotherms) and the work function of ytterbium films on the dose of carbon monoxide are examined. It is demonstrated that both the number of adsorbed molecules and the work function depend (under equal conditions) on the nanofilm thickness; in other words, a size effect is revealed. It is found that this size effect is induced by the electrostatic interaction between the conduction electrons of ytterbium and the electrons localized on the nanofilm surface, which establish bonding between the surface and CO molecules. This interaction depends on the film thickness and limits the number of CO molecules that may be adsorbed onto the surface of a film with a given thickness.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Built-in voltage of organic bulk heterojuction p-i-n solar cells measured by electroabsorption spectroscopy

We investigate the influence of the built-in voltage on the performance of organic bulk heterojuction solar cells that are based on a p-i-n structure. Electrical doping in the hole and the electron transport layer allows to tune their work function and hence to adjust the built-in voltage: Changing the doping concentration from 0.5 to 32 wt% induces a shift of the work function towards the transport levels and increases the built-in voltage. To determine the built-in voltage, we use electroabsorption spectroscopy which is based on an evaluation of the spectra caused by a change in absorption due to an electric field (Stark effect). For a model system with a bulk heterojunction of BF-DPB and C{sub 60}, we show that higher doping concentrations in both the electron and the hole transport layer increase the built-in voltage, leading to an enhanced short circuit current and solar cell performance.

36 MATERIALS SCIENCE↗