SEARCH · Engineering Papers
Results for “WENDY”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Tracing fetal and childhood exposure to lead using isotope analysis of deciduous teeth
We report progress in using the isotopic composition and concentration of Pb in the dentine and enamel of deciduous teeth to provide a high resolution time frame of exposure to Pb during fetal development and early childhood. Isotope measurements (total Pb and {sup 208}Pb/{sup 206}Pb, {sup 207}Pb/{sup 206}Pb ratios) were acquired by laser ablation inductively coupled mass spectrometry at contiguous 100 micron intervals across thin sections of the teeth; from the outer enamel surface to the pulp cavity. Teeth samples (n=10) were selected from two cohorts of children, aged 5–8 years, living in NE England. By integrating the isotope data with histological analysis of the teeth, using the daily incremental lines in dentine, we were able to assign true estimated ages to each ablation point (first 2–3 years for molars, first 1–2 years for incisors+pre-natal growth). Significant differences were observed in the isotope composition and concentration of Pb between children, reflecting differences in the timing and sources of exposure during early childhood. Those born in 2000, after the withdrawal of leaded petrol in 1999, have the lowest dentine Pb levels (<0.2 µg Pb/g) with {sup 208}Pb/{sup 206}Pb (mean ±2σ: 2.126–2.079) {sup 208}Pb/{sup 206}Pb (mean ±2σ: 0.879–0.856) ratios that correlate very closely with modern day Western European industrial aerosols (PM{sub 10}, PM{sub 2.5}) suggesting that diffuse airborne pollution was probably the primary source and exposure pathway. Legacy lead, if present, is insignificant. For those born in 1997, dentine lead levels are typically higher (>0.4 µgPb/g) with {sup 208}Pb/{sup 206}Pb (mean ±2σ: 2.145–2.117) {sup 208}Pb/{sup 206}Pb (mean ±2σ: 0.898–0.882) ratios that can be modelled as a binary mix between industrial aerosols and leaded petrol emissions. Short duration, high intensity exposure events (1–2 months) were readily identified, together with evidence that dentine provides a good proxy for childhood changes in the isotope composition of blood Pb. Our pilot study confirms that laser ablation Pb isotope analysis of deciduous teeth, when carried out in conjunction with histological analysis, permits a reconstruction of the timing, duration and source of exposure to Pb during early childhood. With further development, this approach has the potential to study larger cohorts and appraise environments where the levels of exposure to Pb are much higher. - Highlights: • Reconstructing a high resolution chronology of early childhood exposure to lead. • Combined laser ablation lead isotope – histological analysis of children's teeth. • Using dentine to recover information on the intensity, duration and source of lead. • Importance of industrial airborne lead pollution in a post-leaded petrol era.
Declines in adult blood lead levels in New York City compared with the United States, 2004–2014
Highlights: • Adult lead exposure in New York City (NYC) has declined over a ten-year period overall and across all subgroups. • The 95th percentiles of adult blood lead levels were less than 5 µg/dL in all NYC population subgroups examined. • Disparity in NYC adult lead exposure by income and race/ethnicity has lessened. • Asian adults had higher geometric mean and 95th percentile blood lead levels than other racial/ethnic groups in NYC. To assess changes in lead exposure in the New York City (NYC) adult population over a 10-year period and to contrast changes with national estimates, overall, and by socio-demographics and smoking status.
Lead exposure to children from consumption of backyard chicken eggs
Highlights: • Backyard chicken eggs from most households providing egg samples (98%) contained detectable concentrations of lead. • IIn prediction models, backyard egg consumption increased overall blood lead levels in children • Infants < 1 year of age experience the greatest increase in predicted blood lead levels from backyard egg consumption. • Mean household egg lead concentration was strongly positively correlated with coop soil lead concentrations. Backyard chicken ownership is rapidly increasing in urban areas in the United States, largely as a way to provide eggs for household consumption. Despite elevated levels of environmental lead contamination in many US cities, the role of backyard chicken eggs as a pathway for lead exposure, particularly for children, has received limited scrutiny. To characterize lead exposure from consumption of backyard chicken eggs for children and predict related effects on blood lead level (BLL), we conducted a cross-sectional study of backyard chicken owners in the Greater Boston area (n = 51). We interviewed participants regarding egg consumption by household members and collected backyard eggs (n = 201) and coop soil samples (n = 48) for analysis. Inductively coupled plasma mass spectrometry (ICP-MS) was used to evaluate lead concentration in homogenized eggs and an X-ray fluorescence (XRF) portable device was used to assess soil lead levels in the laboratory. We used the USEPA's Integrated Exposure Uptake Biokinetic Model for Lead in Children (IEUBK) to assess the relative contribution of backyard egg consumption to aggregate BLL in children. Four scenarios were developed in the IEUBK model to address variability in egg consumption rates and egg lead contamination. Lead was detected in egg samples from 98% of the households that provided egg samples. Mean household lead concentration was 0.10 μg/g (SD: 0.18). Egg lead concentrations ranged from below the limit of detection (0.0014 μg/g) to 1.798 μg/g (<1.4–1198 ppb). Egg lead levels were strongly positively correlated with lead concentration in coop soil (r = 0.64; p < 0.001). In modeled scenarios where a child < 7 years frequently ate eggs highly contaminated with lead, BLLs are predicted to increase by 0.9–1.5 μg/dL. In three other scenarios reflecting more moderate egg lead contamination and consumption rates, BLLs were predicted to increase from 0.1 to 0.8 μg/dL. Consumption of backyard chicken eggs can contribute to lead exposure in children. Soil lead remediation prior to chicken ownership may reduce lead exposure from backyard eggs.
Effect of pressure and composition on lattice parameters and unit-cell volume of (Fe,Mg)SiO[subscript 3] post-perovskite
We obtained unit-cell volumes (V) for (Fe{sub 0.2}Mg{sub 0.8})SiO{sub 3} and (Fe{sub 0.4}Mg{sub 0.6})SiO{sub 3} post-perovskite (PPv) over a pressure (P) range of 80-145 GPa by in-situ X-ray diffraction (XRD) measurements in laser-heated diamond anvil cells (DACs). Our study suggests that the PPv structure is highly resistant to back transformation to Pv and (Fe{sub 0.4}Mg{sub 0.6})SiO{sub 3} PPv was preserved down to 80 GPa upon laser heating during decompression before transforming to pure perovskite (Pv). The bulk modulus (K{sub 0}) of PPv was determined to be 215(1) and 198(1) GPa for (Fe{sub 0.2}Mg{sub 0.8})SiO{sub 3} and (Fe{sub 0.4}Mg{sub 0.6})SiO{sub 3} PPv respectively, with a fixed K'{sub 0} = 4. The substitution of Fe for Mg in PPv results in the largest expansion along the b-axis among all three axes and the expansion of the b-axis is nearly independent of pressure whereas the expansion along the a and c directions slightly decreases with increasing pressure. Combining our results with previous studies on (Fe{sub x},Mg{sub 1-x})SiO{sub 3} PPv (x = 0, 0.09, 0.1) shows that the bulk modulus of PPv decreases with increasing Fe content over a composition range x = 0 to 0.4, varying from 231 GPa for x = 0 to 198 GPa for x = 0.4 with zero pressure volumes scaled to composition, V{sub 0} ({angstrom}{sup 3}) = 162.2 + 19.5x and fixed K'{sub 0} = 4.0. The increase of Fe content in PPv from x = 0 to 0.4 results in a 6.3% increase in density and a 5.3% decrease in bulk sound velocity at 130 GPa.
Optimizing bioenergy sorghum productivity and nutrient removal in Illinois: Impact of nitrogen fertilization under diverse marginal conditions
Bioenergy sorghum (Sorghum bicolor L. Moench) is a promising crop for contributing to the United States bioenergy supply. However, the varying limitations of the marginal lands targeted for its cultivation present a management challenge. This two-year study aimed to investigate how the limitations associated with marginal cropland impact the effects of nitrogen fertilization on the yield of bioenergy sorghum and the uptake of 11 macro- (N, P, K, Ca, Mg, and S) and micronutrients (Fe, Mn, Zn, Cu, and B). The study contrasted prime cropland in central Illinois (Urbana) with three marginal cropland sites in southern (Ewing) and central Illinois (Fairbury and Pesotum). These marginal cropland sites are characterized by varying limitations, including low soil fertility (P and K limitations), leaching and erosion, and flooding, respectively. Four nitrogen rates (0, 56, 112, and 168 kg N ha –1 ) were tested under eight environments. The average yields and ranges of sorghum biomass were 20.2 (17.0–23.2) Mg ha –1 in Urbana, 18.1 (13.1–19.8) Mg ha –1 in Ewing, 13.8 (9.0–17.3) Mg ha –1 in Fairbury, and 23.3 (14.6–33.0) Mg ha –1 in Pesotum. Optimal N rates were 56 N in Pesotum and 112 N in Urbana, Ewing, and Fairbury. Tissue macronutrient contents in Urbana were generally higher than in the marginal croplands, while micronutrient contents did not show discernible trends. Increasing N rate generally correlated with the macronutrient removal except in Ewing. Comparable sorghum biomass yields were observed between prime and marginal croplands (averaging 18.3 Mg ha –1 ), but optimal N rates varied between 56 N and 112 N. This suggests that yield gaps can be narrowed by applying the optimal N rates for the respective locations. However, increased removals of macronutrients, especially P and K, with increasing yields indicate the need to revise fertilizer recommendations, particularly for soils deficient in these nutrients.
Experimentally determined dissolution kinetics of Na-rich borosilicate glass at far from equilibrium conditions: Implications for Transition State Theory
Abstract—The dissolution kinetics of five chemically complex and two chemically simple borosilicate glass compositions (Na-B-Si±Al) were determined over a range of solution saturation values by varying the flow-through rates (1 to 100 mL d -1 ) in a dynamic single-pass flow-through (SPFT) apparatus. The chemically complex borosilicate glasses are representative of prospective hosts for radioactive waste disposal and are characterized by relatively high molar Si/(Si+Al) and Na/(Al+B) ratios (>0.7 and >1.0, respectively). Analysis by x-ray absorption spectroscopy (XAS) indicates that the fraction of ivB to iiiB (N 4 ) varies from 0.66 to 0.70. Despite large differences in bulk chemistry, values of δ 29 Si peak shift determined by MAS-NMR varies only by about 7 ppm (δ 29 Si = -94 to -87 ppm), indicating small differences in polymerization state for the glasses. Forward rates of reaction measured in dynamic experiments converge (average log10 rate [40°C, pH 9] = -1.87±0.79 [g/(m 2 •d)]) at high values of flow-rate (q) to sample surface area (S). Dissolution rates are independent of total Free Energy of Hydration (FEH) and this model appears to overestimate the impact of excess Na on chemical durability. For borosilicate glass compositions in which molar Na > Al + B, further addition of Na appears to stabilize the glass structure with respect to hydrolysis and dissolution. Compared to other borosilicate and aluminosilicate glasses, the glass specimens from this study dissolve at nearly the same rate (0 to ~55×) as the more polymerized glasses, such as vitreous reedmergnerite (NaBSi3O8), albite, and silica. Dissolution of glass follows the order: boroaluminosilicate glass > vitreous reedmergnerite > vitreous albite > silica glass, which is the same order of increasingly negative 29 Si chemical shifts. The chemical shift of 29 Si is a measure of the extent of bond overlap between Si and O and correlates with the forward rate of reaction. Thus, dissolution appears to be rate-limited by rupture of the Si—O bond, which is consistent with the tenants of Transition State Theory (TST). Therefore, dissolution at far from equilibrium conditions is dependent upon the speed of the rate-controlling elementary reaction and not on the sum of the free energies of hydration of the constituents of boroaluminosilicate glass.
Experimental Determination of the Effect of the Ratio of B/Al on Glass Dissolution along the Nepheline (NaAlSiO 4 ) – Malinkoite (NaBSiO 4 ) Join
The dissolution kinetics of five glasses along the NaAlSiO 4 -NaBSiO 4 join were used to evaluate how the structural variations associated with boron-aluminum substitution affect the rate of dissolution. The composition of each glass varied inversely in mol% of Al 2 O 3 (5 to 25 mol%) and B 2 O 3 (20 to 0 mol%) with Na 2 O (25 mol%) and SiO 2 (50 mol%) making up the remaining amount, in every case Na/(Al+B) = 1.0. Single-pass flow-through experiments (SPFT) were conducted under dilute conditions as a function of solution pH (from 7.0 to 12.0) and temperature (from 23° to 90°C). Analysis by 27 Al and 29 Si MAS-NMR suggests Al (~98% [4] Al) and Si atoms (~100% [4] Si) occupy a tetrahedral coordination whereas, B atoms occupy both tetrahedral ([4]B) and trigonal ( [3] B) coordination. The distribution of [3]B fractionated between [3] B(ring) and [3] B(non-ring) moieties, with the [3] B(ring)/ [3] B(non-ring) ratio increases with the B/Al ratio. The MAS-NMR results also indicated an increase in the fraction of [4] B with an increase in the B/Al ratio. But despite the changes in the B/Al ratio and B coordination, the 29 Si spectra maintain a chemical shift between -88 to -84 ppm for each glass. Unlike the 29 Si spectra, the 27 Al resonances shift to more positive values with an increase in the B/Al ratio which suggests mixing between the [4] Al and [3] B sites, assuming avoidance between tetrahedral trivalent cations ( [4] Al-O- [4] B avoidance). Raman spectroscopy was use to augment the results collected from MAS-NMR and demonstrated that NeB4 (glass sample with the highest B content) was glass-glass phase separated (e.g., heterogeneous glass). Results from SPFT experiments suggest a forward rate of reaction and pH power law coefficients,η, that are independent of B/Al under these neutral to alkaline test conditions for all homogeneous glasses. The temperature dependence shows an order of magnitude increase in the dissolution rate with a 67°C increase in temperature and suggests dissolution is controlled by a surface-mediated reaction, evident by the activation energy, E a , being between 44±8 and 48±7 kJ/mol. Forward dissolution rates, based on Na and Si release, for homogeneous glasses are independent of the B/Al ratio, whereas dissolution rates based on Al and B release are not. Dissolution rates based on B release increase with an increase in the fraction of [3] B(ring). Finally in accord with previous studies, the data discussed in this manuscript suggest rupture of the Al-O and Si-O bond as the rate-limiting step controlling the dissolution of these glasses.
Paleoproterozoic melt-depleted lithospheric mantle in the Khanka block, far eastern Russia: Inferences for mobile belts bordering the North China and Siberian cratons
Not Available
Microbial-explicit processes and refined perennial plant traits improve modeled ecosystem carbon dynamics
Not Available
Remote sensing of geothermal-related minerals for resource exploration in Nevada
Not Available
Mapping alteration in geothermal drill core using a field portable spectroradiometer
Not Available
Kinetics of the methylation of a platinum(II) diimine dithiolate complex
Pt(dbbpy)(bdt) and Pt(tmphen)(bdt) (dbbpy = 4,4'-di-t-butyl-2,2'-bipyridine; tmphen = 3,4,7,8-tetramethyl-1,10-phenanthroline; bdt2- = 1,2-benzenedithiolate) are reported. Pt(dbbpy)(bdt) reacts with one equivalent of methyl iodide to give the S-methylated product, [Pt(dbbpy)(CH3bdt)]I. The reaction follows second order kinetics with a rate constant of 1.3×10 2 M-1s-1 at 311 K. The accumulated data are consistent with direct nucleophilic attack by the coordinated bdt2- ligand sulfur atom on the carbon atom of the methyl iodide. Variable-temperature experiments yield an Arrhenius activation energy of 51 ± 3 kJ/mol. Activated complex reaction theory yields an enthalpy and entropy of activation of 48 ± 2 kJ/mol and 125 ± 7 J/(mol K), respectively, consistent with an SN2 reaction mechanism. The structure of the monosulfinate adduct, Pt(dbbpy)(bdtO2), also is reported. The fluid-solution luminescence of Pt(tmphen)(bdt) is concentration dependent and characterized by a 1591 ± 41 ns lifetime and 2.6 ± 0.2% quantum yield at infinite dilution.
Understanding Asteroid 16 Psyche’s composition through 3D impact crater modeling
Asteroid 16 Psyche is the largest M-type (metallic) Main Belt Asteroid (MBA). Radar albedo data indicate Psyche’s surface is rich in metallic content, but estimates for Psyche’s bulk structure vary widely, with bulk density estimates ranging from 1.4 ± 0.3 g/cm 3 to 4.5 ± 1.4 g/cm 3 and porosity estimates ranging from 30% to 70%. A forthcoming NASA discovery mission will visit Psyche. Narrowing the range of estimated compositions of Psyche prior to mission launch can help to determine the necessary tools for asteroid analysis. Psyche has two large impact structures in its Southern hemisphere, with estimated diameters from 50 km to 70 km and estimated depths up to 6.4 km. In this work, we present results from 2D and 3D hydrocode simulations of the largest of these impact structures. Through quantitative comparison of the simulated crater dimensions with measured values, our models suggest that Psyche is largely composed of porous, metallic material. In addition, to match the crater dimensions, our simulations indicate that the angle of impact was significantly altered from vertical by 45–60 degrees.
Exploring density and strength variations in asteroid 16 Psyche’s composition with 3D hydrocode modeling of its deepest impact structure
Asteroid 16 Psyche is the largest metallic Main Belt Asteroid and is the subject of a forthcoming NASA mission. The composition of Psyche is still unknown and subject of recent debate. In particular, how much porosity is within Psyche, along with how much of Psyche consists of non-metallic versus metallic materials, are central questions to the issue of Psyche’s composition. If Psyche is indeed predominantly composed of metallic materials, it would need to have considerable porosity (~ 30%–50%) for a composition consistent with its expected bulk density (~ 3.7–4.1 g/cm). In this work, we vary the density and strength of Psyche by including uniform and layered fields of pseudo-microporosity, in addition to investigating the presence of macroscopic voids, i.e., spaces larger than the size of the simulation’s mesh cells, in rubble-pile configurations. Further, all configurations result in bulk densities within the uncertainties of measured values, however the strength of Psyche and the distribution of pseudo-pores are varied. Through 3D computational models of Psyche’s deepest impact structure, we show that Psyche’s composition is unlikely to contain only pseudo-microporosity. Rather, rubble pile structures, which include macroscopic voids, are shown to match the crater’s measured aspect ratio better than simulations of structures that included only pseudo-microporosity.
Detection of voids in hydrogen embrittled iron using transmission X-ray microscopy
Hydrogen embrittlement remains a barrier to widespread adoption of hydrogen as a carbon-neutral energy source. Here, hydrogen embrittlement mechanisms are investigated across length scales in iron using transmission X-ray microscopy (TXM), digital image correlation (DIC), and notched tensile testing during in-situ electrochemical hydrogen charging. TXM reveals void size and spatial distribution ahead of a propagating crack. We find hydrogen charging leads to voids within ~10 μm of the crack tip and suppression of voids beyond this distance. Near the crack tip, voids are elongated in the direction of the crack and are smaller than voids in an uncharged sample. In the presence of hydrogen, these voids lead to quasi-cleavage fracture and a sharper crack tip. DIC shows localization and reduction of plastic strain with hydrogen charging, and tensile testing reveals a reduction in fracture energy and elongation at failure. Finally, these results are discussed in the context of hydrogen embrittlement mechanisms.