Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VALENCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Importance of High Valence Element Nb in Ni-Rich Layered Cathodes for High-Voltage Lithium-Metal Batteries

Ni-rich layered cathode materials have attracted extensive attention due to their higher energy density and technological maturity in commercialization. As the nickel content is raised, especially surpassing 80%, the increased energy density comes with the tradeoff of diminished thermal stability and increased electrochemical structural instability of the cathode. Compared with Co, Al, B, and Ta, the introduction of high valence element Nb significantly improved the electrochemical cycling, delivering a capacity of 202 mAh/g, corresponding to a capacity retention of 92% after 200 cycles tested at 45 °C. Further, the ex situ differential scanning calorimetry and in situ isothermal microcalorimetry demonstrate that the Nb-modified cathode has the potential to enhance the safety of ultrahigh nickel (Ni) NMCs and displays remarkable resilience to extensive cycling by inhibiting high-temperature decomposition reactions and exhibiting a lower heat flow during electrochemical cycling.

25 ENERGY STORAGE↗
DOE OSTI2018

High Thermoelectric Performance in SnTe–AgSbTe 2 Alloys from Lattice Softening, Giant Phonon–Vacancy Scattering, and Valence Band Convergence

We report on the underlying mechanism that enables the SnTe-AgSbTe 2 system to exhibit superior thermoelectric figure of merit (ZT) compared to its parent compound SnTe. We show that AgSbTe 2 alloying has a profound impact on the band structure of SnTe by converging the energies of its light and heavy valence bands, leading to significantly enhanced Seebeck coefficients. We have also unraveled a significant connection between alloying and defect stability in this system, wherein the Sn vacancy concentration increases significantly when Ag and Sb are alloyed on the Sn site. The increased Sn vacancy concentration dramatically reduces the lattice thermal conductivity through both lattice softening and phonon-vacancy scattering to ~0.4 W m -1 K -1 at 800 K. Consequently, a ZT value of 1.2 at 800 K for AgSn 5 SbTe 7 can be achieved by doping I on Te sites. Lastly, this represents a 300% improvement over pristine SnTe, outperforming many reported SnTe-based thermoelectric materials.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Intrachain Electron Transport in a Naphthalene Diimide–Bithiophene Copolymer: A Mixed-Valence Approach

The mechanism of electron transport in the polymer P(NDI2OD-T2) (poly(N,N'-bis-2-octyldodecylnaphthalene-1,4,5,8-bis-dicarboximide-2,6-diyl-alt-2,2'-bithiophene-5,5'-diyl), N2200) is investigated. Here, we use spectroelectrochemical measurements on P(NDI2OD-T2), spectroscopic studies of a chemically reduced model compound, 2,2'-(2,2'-bithiophene-5,5'-diyl)-bis(N,N'-di-n-hexylnaphthalene-1,8:4,5-bis(dicarboximide)) (NDI-T2-NDI), and electronic structure calculations to evaluate the microscopic charge-transport parameters. Experimental and computational data suggest that NDI-T2-NDI•– is a class-II mixed-valence compound, strongly supporting the small-polaron hopping model as a charge-transport mechanism for electrons along polymer chains in P(NDI2OD-T2). The electronic coupling between the NDI redox units is at least 21 meV, while the reorganization energy is between 0.45 and 0.56 eV. Using a hopping model, we estimated the mobility and activation energy for electron transport along P(NDI2OD-T2) polymer chains to be 0.15 cm 2 V –1 s –1 and 60 meV, respectively. Our study elucidates a long-standing issue of explaining the coexistence in P(NDI2OD-T2) of localized redox sites with relatively large electron mobilities more usually achieved only in highly conjugated polymers.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Structural and Valence State Modification of Cobalt in CoPt Nanocatalysts in Redox Conditions

Platinum is the primary catalyst for many chemical reactions in the field of heterogeneous catalysis. However, platinum is both expensive and rare. Therefore, it is advantageous to combine Pt with another metal to reduce cost while also enhancing stability. To that end, Pt is often combined with Co to form Co-Pt nanocrystals. However, dynamical restructuring effects that occur during reaction in Co-Pt ensembles can impact catalytic properties. In this study, model Co 2 Pt 3 nanoparticles supported on carbon were characterized during a redox cycle with two in situ approaches, namely X-ray absorption spectroscopy (XAS) and scanning transmission electron microscopy (STEM) using a multimodal microreactor. The sample was exposed to temperatures up to 500 °C under H 2 , and then to O 2 at 300 °C. Irreversible segregation of Co in the Co-Pt particles was seen during redox cycling and substantial changes of the oxidation state of Co were observed. After the H 2 treatment, a fraction of Co could not be fully reduced and incorporated into a mixed Co-Pt phase. Re-oxidation of the sample increased Co segregation, and the segregated material had a different valence state than in the fresh, oxidized sample. Furthermore, this in situ study describes dynamical restructuring effects in CoPt nano-catalysts at the atomic scale that are crucial to understand to improve the design of catalysts used in major chemical processes.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Magnetism in Mixed Valence, Defect, Cubic Perovskites: BaIn 1– x Fe x O 2.5+δ , x = 0.25, 0.50, and 0.75. Local and Average Structures

The series BaIn 1–x Fe x O 2.5+δ , x = 0.25, 0.50, and 0.75, has been prepared under air-fired and argon-fired conditions and studied using X-ray diffraction, d.c. and a.c. susceptibility, Mössbauer spectroscopy, neutron diffraction, X-ray near edge absorption spectroscopy (XANES), and X-ray pair distribution (PDF) methods. While Ba 2 In 2 O 5 (BaInO 2.5 ) crystallizes in an ordered brownmillerite structure, Ibm2, and Ba 2 Fe 2 O 5 (BaFeO 2.5 ) crystallizes in a complex monoclinic structure, P2 1 /c, showing seven Fe 3+ sites with tetrahedral, square planar, and octahedral environments, all phases studied here crystallize in the cubic perovskite structure, Pm$\bar{}3}$m, with long-range disorder on the small cation and oxygen sites. 57 Fe Mössbauer studies indicate a mixed valency, Fe 4+ /Fe 3+ , for both the air-fired and argon-fired samples. The increased Fe 3+ content for the argon-fired samples is reflected in increased cubic cell constants and in the increased Mössbauer fraction. It appears that the Pm$\bar{}3}$m phases are only metastable when fired in argon. From a slightly modified percolation theory for a primitive cubic lattice (taking into account the presence of random O atom vacancies), long-range spin order is permitted for the x = 0.50 and 0.75 phases. Instead, the d.c. susceptibility shows only zero-field-cooled (ZFC) and field-cooled (FC) divergences at ~6 K [5 K] for x = 0.50 and at ~22 K [21 K] for x = 0.75, with values for the argon-fired samples in [ ]. Neutron diffraction data for the air-fired samples confirm the absence of long-range magnetic order at any studied temperature. For the air-fired x = 0.50, a.c. susceptibility data show a frequency-dependent χ'(max) and spin glass behavior, while for x = 0.75, χ'(max) is invariant with frequency, ruling out either a spin glass or a superparamagnetic ground state. These behaviors are discussed in terms of competing Fe 3+ –Fe 3+ antiferromagnetic exchange and ferromagnetic Fe 3+ –Fe 4+ exchange. The PDF and 57 Fe Mössbauer data indicate a local structure at short interatomic distances, which deviates strongly from the average Pm$\bar{}3}$m model. Fe Mössbauer, PDF, and XANES data show a systematic dependence on x and indicate that the Fe 3+ sites are largely fourfold-coordinated and Fe 4+ sites are fivefold- or sixfold-coordinated.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2014

Effect of Morphology and Manganese Valence on the Voltage Fade and Capacity Retention of Li[Li 2/12 Ni 3/12 Mn 7/12 ]O 2

We have determined the electrochemical characteristics of the high voltage, high capacity Li-ion battery cathode material Li[Li 2/12 Ni 3/12 Mn 7/12 ]O 2 prepared using three different synthesis routes: sol-gel, hydroxide co-precipitation, and carbonate co-precipitation. Each route leads to distinct morphologies and surface areas while maintaining the same crystal structures. X-ray photoelectron spectroscopy (XPS) measurements reveal differences in their surface chemistries upon cycling, which correlate with voltage fading. As expected, we observed the valence state of Mn on the surface to decrease upon lithiation, and this reduction is specifically correlated to discharging below 3.6V. Furthermore, the data shows a correlation of the formation of Li 2 CO 3 with Mn oxidation state from the

25 ENERGY STORAGE↗
DOE OSTI2014

Consequences of Optimal Bond Valence on Structural Rigidity and Improved Luminescence Properties in Sr x Ba 2-x SiO 4 :Eu 2+ Orthosilicate Phosphors

The orthosilicate phosphors Sr x Ba 2–x SiO 4 :Eu 2+ have now been known for over four decades and have found extensive recent use in solid-state white lighting. It is well-recognized in the literature and in practice that intermediate compositions in the solid-solutions between the orthosilicates Sr 2 SiO 4 and Ba 2 SiO 4 yield the best phosphor hosts when the thermal stability of luminescence is considered. We employ a combination of synchrotron X-ray diffraction, total scattering measurements, density functional theory calculations, and low-temperature heat capacity measurements, in conjunction with detailed temperature- and time-resolved studies of luminescence properties to understand the origins of the improved luminescence properties. We observe that in the intermediate compositions, the two cation sites in the crystal structure are optimally bonded as determined from bond valence sum calculations. Optimal bonding results in a more rigid lattice, as established by the intermediate compositions possessing the highest Debye temperature, which are determined experimentally from low-temperature heat capacity measurements. Greater rigidity in turn results in the highest luminescence efficiency for intermediate compositions at elevated temperatures.

Denault, Kristin A.↗
DOE OSTI2014

Ordered BaAl4- Type Variants in the BaAuxSn4-x System: A Unified View on Their Phase Stabilities versus Valence Electron Counts

Three ordered structures of the tetragonal BaAl4 type were identified in the Ba–Au–Sn system, from which a unified view of the interplay between the valence electron counts (VECs) and phase stabilities of these three types of derivatives can be developed. The BaNiSn3 (I4mm), ThCr2Si2 (I4/mmm), and CaBe2Ge2 (P4/nmm) type BaAuxSn4–x phases occurred respectively at x = 0.78(1)–1, 1.38(1)–1.47(1), and 1.52(1)–2.17(1), consistent with theoretical atomic “coloring” analyses that reveal an optimal VEC of 14 for the ThCr2Si2 type but larger and smaller values respectively for the BaNiSn3- and CaBe2Ge2-type structures.

36 MATERIALS SCIENCE↗
DOE OSTI2014

NaCu 6 Se 4 : A Layered Compound with Mixed Valency and Metallic Properties

A new ternary compound NaCu6Se4 was synthesized from the reaction of Cu in a molten sodium polyselenide flux. The compound crystallizes in trigonal space group R$\bar{3}$m with a = 4.0465(3) Å and c = 41.493(5) Å. The crystal structure contains flat twodimensional slabs of 1/∞[Cu 6 Se 4 ] with a unique structural arrangement, separated by Na cations. The compound contains mixed valency and has a high conductivity of ~3 × 10 3 S cm -1 at room temperature, and exhibits increasing conductivity with decreasing temperature, indicating metallic behavior. A small positive thermopower (4-11 μV K -1 from 300 to 500 K) and Hall effect measurements indicate p-type transport with a carrier concentration of ~2.8(3) × 10 21 cm -3 and a hole mobility of ~8.75 cm 2 V -1 s -1 at 300 K. NaCu 6 Se 4 exhibits temperatureindependent Pauli paramagnetism.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Valence-Dependent Electrical Conductivity in a 3D Tetrahydroxyquinone-Based Metal–Organic Framework

Electrically conductive metal–organic frameworks (cMOFs) have become a topic of intense interest in recent years because of their great potential in electrochemical energy storage, electrocatalysis, and sensing applications. Most of the cMOFs reported hitherto are 2D structures, and 3D cMOFs remain rare. Herein we report FeTHQ, a 3D cMOF synthesized from tetrahydroxy-1,4-quinone (THQ) and iron(II) sulfate salt. FeTHQ exhibited a conductivity of 3.3 ± 0.55 mS cm –1 at 300 K, which is high for 3D cMOFs. The conductivity of FeTHQ is valence-dependent. Additionally, a higher conductivity was measured with the as-prepared FeTHQ than with the air-oxidized and sodium naphthalenide-reduced samples.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Valence Disproportionation of GeS in the PbS Matrix Forms Pb 5 Ge 5 S 12 Inclusions with Conduction Band Alignment Leading to High n-Type Thermoelectric Performance

Converting waste heat into useful electricity using solid-state thermoelectrics has a potential for enormous global energy savings. Lead chalcogenides are among the most prominent thermoelectric materials, whose performance decreases with an increase in chalcogen amounts (e.g., PbTe>PbSe>PbS). Herein, we demonstrate the simultaneous optimization of the electrical and thermal transport properties of PbS-based compounds by alloying with GeS. The addition of GeS triggers a complex cascade of beneficial events as follows: Ge 2+ substitution in Pb 2+ and discordant off-center behavior; formation of Pb 5 Ge 5 S 12 as stable second phase inclusions through valence disproportionation of Ge 2+ to Ge0 and Ge 4+ . PbS and Pb 5 Ge 5 S 12 exhibit good conduction band energy alignment that preserves the high electron mobility; the formation of Pb 5 Ge 5 S 12 increases the electron carrier concentration by introducing S vacancies. Sb doping as the electron donor produces a large power factor and low lattice thermal conductivity (κ lat ) of ~0.61 Wm -1 K -1 . The highest performance was obtained for the 14% GeS-alloyed samples, which exhibited an increased room temperature electron mobility of ~121 cm 2 V -1 s -1 for 3 × 10 19 cm -3 carrier density, and a ZT, of 1.32 at 923 K. This is ~ 55% greater that the corresponding Sb-doped PbS sample and is one of the highest reported for the n-type PbS system. Moreover, the average ZT (ZT avg ) of ~0.76 from 400 to 923 K is the highest for PbS-based systems.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

CO Adsorbates Induced Framework-Associated Low-Valence Co δ+ Sites in Co-ZSM-5 for Ethane Dehydrogenation

The dynamic structural evolution of heterogeneous catalysts is a ubiquitous phenomenon that has attracted a lot of interest. Catalyst reconstruction can occur after appropriate pretreatment, resulting in more efficient active catalysts, which is an attractive but challenging issue. Here, we reveal a CO activation strategy that controls the microenvironment of the Co sites in the high-silica Co-ZSM-5 catalyst (denoted as 0.50Co-Z5(340)), resulting in three times higher initial conversion and superior regeneration durability in the ethane dehydrogenation reaction compared to the same catalyst without CO pretreatment. In situ spectroscopy and metadynamics simulations reveal that the Co 2+ sites in 0.50Co-Z5(340) dislodge from the framework and move toward the nearby Brønsted acid sites, forming framework-associated low-valence Co δ+ species. Mechanistic studies indicate that the Co δ+ species catalyze ethane C–H bond cleavage via an oxidative addition mechanism, and ethylene is produced simultaneously with H* coupling (direct pathway). The promoted C–H bond activation and facile ethylene desorption explain the superior ethane dehydrogenation performance of the herein CO preactivated 0.50Co-Z5(340) catalyst.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Deterministic Control of Sn 3+ Valence and Electronic Phase Evolution in AgSnSe 2

Understanding how unusual oxidation states influence material properties is important for both fundamental science and energy applications. AgSnSe 2 is particularly intriguing because it stabilizes the rare and long-debated Sn 3+ oxidation state, whose true existence and role have remained enigmatic for many years. Here, in this work, we employ X-ray photoelectron spectroscopy, Mössbauer spectroscopy, and X-ray absorption spectroscopy to directly probe the oxidation state of Sn and its evolution under chemical substitution. All experimental evidence consistently confirms the presence of Sn in the +3 oxidation state in AgSnSe 2 . Complementary density functional theory calculations further corroborate this assignment. By substituting Sn with Sb, we systematically control the electronic state and its impact on the material’s physical properties. At low Sb concentrations, AgSnSe 2 retains superconductivity with a transition temperature of ∼5 K, while increasing Sb content deterministically drives a metallic-to-semiconducting transition through progressive suppression of superconductivity. Spectroscopic analyses show that Sb substitution provides deterministic control of the Sn oxidation state, evolving from a uniform +3 configuration in AgSnSe 2 to a mixed +2/+4 valence-skipping regime at higher Sb levels, thereby establishing a direct chemical handle over the material’s electronic phase. This tunability demonstrates that the Sn oxidation state in AgSnSe2 can be precisely engineered through Sb substitution, enabling controlled electronic phase transitions and establishing AgSnSe 2 as a promising platform for quantum and energy-related applications

crystal structure↗
DOE OSTI2019

Unconventional Method for Fabricating Valence Tautomeric Materials: Integrating Redox Center within a Metal–Organic Framework

Due to the structural advantages displayed by Metal–Organic Frameworks (MOFs), integrating Valence Tautomerism (VT) systems within MOFs could be an effective strategy in order to break through the constraints of the traditional ones. Herein, we report the first successful integration of a VT system into a MOF termed VT-MOF-1. The structural characteristics of VT-MOF-1, such as dinuclear cobalt-catechol clusters and solvent-accessible pores, are both innovative and novel, potentially yielding new vitality within VT field. In addition, VT-MOF-1 exhibits specific behaviors responsive to temperature and different solvent molecules as n-butanol, tert-butanol, and isopropyl alcohol. In conclusion, the entropy values and configurations of the solvent molecules might be responsible for the tunable sensing behaviors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2017

Theory-driven design of high-valence metal sites for water oxidation confirmed using in situ soft X-ray absorption

The efficiency with which renewable fuels and feedstocks are synthesized from electrical sources is limited at present by the sluggish oxygen evolution reaction (OER) in pH-neutral media. Here, we took the view that generating transition metal sites with high valence at low applied bias should improve the activity of neutral OER catalysts. Using density functional theory, we find that the formation energy of desired Ni 4+ sites is systematically modulated by incorporating judicious combinations of Co, Fe and non-metal phosphorus. Here we synthesized NiCoFeP oxyhydroxides and probed their oxidation kinetics by employing in situ soft X-ray absorption (sXAS). In situ sXAS studies of neutral-pH OER catalysts indicate ready promotion of Ni 4+ under low overpotential conditions. NiCoFeP catalyst outperforms IrO 2 and retains its performance following 100 hours of operation. We showcase NiCoFeP in a membrane-free CO 2 electroreduction system that achieves a 1.99 V cell voltage at 10 mA cm -2 , reducing CO 2 into CO and oxidizing H 2 O to O 2 with a 64% electricity-to-chemical-fuel efficiency.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2020

Nonlocal Coulomb interaction and spin-freezing crossover as a route to valence-skipping charge order

Abstract Multiorbital systems away from global half-filling host intriguing physical properties promoted by Hund’s coupling. Despite increasing awareness of this regime dubbed Hund’s metal, effect of nonlocal interaction is still elusive. Here we study a three-orbital model with 1/3 filling (two electrons per site) including the intersite Coulomb interaction ( V ). Using the G W plus extended dynamical mean-field theory, the valence-skipping charge order transition is shown to be driven by V . Most interestingly, the instability to this transition is significantly enhanced in the spin-freezing crossover regime, thereby lowering the critical V to the formation of charge order. This behavior is found to be closely related to the population profile of the atomic multiplet states in the spin-freezing regime. In this regime, maximum spin states are dominant in each total charge subspace with substantial amount of one- and three-electron occupations, which leads to almost equal population of one- and the maximum spin three-electron state. Our finding unveils another feature of the Hund’s metal and has potential implications for the broad range of multiorbital systems as well as the recently discovered charge order in iron pnictides.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

The emergence of valency in colloidal crystals through electron equivalents

Colloidal crystal engineering of complex, low-symmetry architectures is challenging when isotropic building blocks are assembled. In this study we describe an approach to generating such structures based upon programmable atom equivalents (nanoparticles functionalized with many DNA strands) and mobile electron equivalents (small particles functionalized with a low number of DNA strands complementary to the programmable atom equivalents). Under appropriate conditions, the spatial distribution of the electron equivalents breaks the symmetry of isotropic programmable atom equivalents, akin to the anisotropic distribution of valence electrons or coordination sites around a metal atom, leading to a set of well-defined coordination geometries and access to three new low-symmetry crystalline phases. All three phases represent the first examples of colloidal crystals, with two of them having elemental analogues (body-centred tetragonal and high-pressure gallium), while the third (triple double-gyroid structure) has no known natural equivalent. This approach enables the creation of complex, low-symmetry colloidal crystals that might find use in various technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Valence band electronic structure of the van der Waals ferromagnetic insulators: VI 3 and CrI 3

Ferromagnetic van der Waals (vdW) insulators are of great scientific interest for their promising applications in spintronics. It has been indicated that in the two materials within this class, CrI 3 and VI 3 , the magnetic ground state, the band gap, and the Fermi level could be manipulated by varying the layer thickness, strain or doping. To understand how these factors impact the properties, a detailed understanding of the electronic structure would be required. However, the experimental studies of the electronic structure of these materials are still very sparse. Here, we present the detailed electronic structure of CrI 3 and VI 3 measured by angle-resolved photoemission spectroscopy (ARPES). Our results show a band-gap of the order of 1 eV, sharply contrasting some theoretical predictions such as Dirac half-metallicity and metallic phases, indicating that the intra-atomic interaction parameter (U) and spin-orbit coupling (SOC) were not properly accounted for in the calculations. We also find significant differences in the electronic properties of these two materials, in spite of similarities in their crystal structure. In CrI 3 , the valence band maximum is dominated by the I 5p, whereas in VI 3 it is dominated by the V 3d derived states. Our results represent valuable input for further improvements in the theoretical modeling of these systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗