Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Toroid”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Low-frequency fluctuation spectra and associated particle transport in the NASA Lewis bumpy-torus plasma

The strong radial electric field associated with the Penning discharge and the strong toroidal magnetic field give rise to a diversity of E/B phenomena, such as rotating waves and spokes, which in turn manifest themselves as space-time fluctuations of the plasma density and potential. Work is done to further understand the nature and origin of the fluctuations and their connection with fluctuation-induced transport. The approach is to monitor the density and potential fluctuations; to digitize the data; and to generate, with the aid of a computer, various spectral properties by means of the fast fourier transform. Of particular interest is the computer-generated transport spectrum that indicates in a quantitative way which fluctuation spectral components contribute to transport and which do not. All experimental measurements of the spectral characteristics of the plasma are given in absolute units rather than as relative values. Preliminary measurements of the transport spectrum of the ion population are given, and it is shown that the fluctuation-induced transport is in order-of-magnitude agreement with that inferred from the steady state current flowing to the electrodes that generate the plasma.

Singh, C. M.↗

NASTRAN analysis of Tokamak vacuum vessel using interactive graphics

Isoparametric quadrilateral and triangular elements were used to represent the vacuum vessel shell structure. For toroidally symmetric loadings, MPCs were employed across model boundaries and rigid format 24 was invoked. Nonsymmetric loadings required the use of the cyclic symmetry analysis available with rigid format 49. NASTRAN served as an important analysis tool in the Tokamak design effort by providing a reliable means for assessing structural integrity. Interactive graphics were employed in the finite element model generation and in the post-processing of results. It was felt that model generation and checkout with interactive graphics reduced the modelling effort and debugging man-hours significantly.

Miller, A.↗

Flame characteristics of a NASA contra swirler module

The structure of unconfined flames stabilized on a NASA contra-swirl can has been examined. The structure depends on reference velocity and fuel-air ratio, and photographic illustrations of representative examples of each flame type are shown. A highly compact flame is obtained over a narrow band of fuel-air ratios, within the total range over which flames may be stabilized, at high reference velocity (27.8 m/s). The compact structure can only be obtained with careful fuel nozzle location. Chemical concentration profiles, temperature profiles and sodium chloride seeding experiments all confirm the visual impression of compactness. A flame with 50% greater fuel throughput has a much less compact structure, which is reflected in lower maximum temperature, much more complex chemical concentration distributions and a more diffuse recirculation boundary as observed by sodium chloride seeding than in the compact flame. Each of these flames has not only an evident axial recirculation core but also a toroidal recirculation region over the bluff region between the inner and outer swirlers. In contrast, laser Doppler velocimetry measurements carried out on a flame with lower reference velocity (5.65 m/s) do not indicate the presence of a secondary recirculation region in this flame.

Thompson, D.↗

Images of Io's sodium cloud

The first direct images of Io's sodium cloud are reported and analyzed. The observed cloud extends for more than 100,000 kilometers along Io's orbit and is a somewhat 'banana-shaped' partial toroid. More sodium atoms precede Io than follow it. A model based on the escape of sodium from a specific localized area on Io provides a reasonable fit to the observed intensity distribution whereas isotropic escape does not.

Matson, D. L.↗

Extensions of guiding center motion to higher order

In a static magnetic field, some well-known guiding-center equations maintain their form when extended to next order in gyroradius. In these cases, it is only necessary to include the next order term in the magnetic moment series. The differential equation for guiding-center motion which describes both the parallel and perpendicular velocities correctly through first order in gyroradius is given. The question of how to define the guiding center position through second order arises and is discussed, and second order drifts are derived for one usual definition. The toroidal canonical angular momentum, P-phi, of the guiding center in an axisymmetric field is shown to be conserved using the guiding center velocity correct through first order. When second-order motion is included, P-phi is no longer a constant. The above extensions of guiding-center theory help to resolve the different tokamak orbits obtained either by using the guiding-center equations of motion or by using conservation of P-phi.

Northrop, T. G.↗

Lower hybrid emission diagnostics on the NASA Lewis Bumpy Torus

The feasibility of using RF emission near the lower-hybrid frequency of the NASA Lewis Bumpy Torus plasma for diagnostic purposes is examined. The emission is detected using a spectrum analyzer and a 50-ohm miniature coaxial antenna that is sensitive to the polarization of the incoming signal. The frequency shift of the lower-hybrid emission peak is monitored as a function of the background pressure, electrode voltage, electrode ring configuration, and the strength of the toroidal dc magnetic field. Simultaneous measurements of the average plasma density are made with a polarization diplexing microwave interferometer. The experimental results extend previous work to include negative electrode voltages and plasma densities up to 1 trillion per cu cm. The information derived from the experiment is discussed with reference to: (1) the strength of the dc magnetic field in the emitting region, (2) a comparison of the lower-hybrid plasma density with the average plasma density, and (3) the validity of the cold-plasma lower-hybrid resonance formula in the high-density operating regime of the bumpy-torus plasma.

Mallavarpu, R.↗

Aspheric grating for extreme ultraviolet astronomy

A family of plane curves is developed which can diffract incident parallel rays to a point focus. These curves, termed diffractoidal curves, are rotated around an axis to produce surfaces of revolution correspondingly termed diffractoids, whose imaging properties for sources at infinity are studied by ray tracing in a few examples. The paraboloid emerges as a limiting case of the diffractoid. A comparison is made between the stigmatic focusing properties of the diffractoid and the toroidal grating.

Kastner, S. O.↗

Effects of applied dc radial electric fields on particle transport in a bumpy torus plasma

The influence of applied dc radial electric fields on particle transport in a bumpy torus plasma is studied. The plasma, magnetic field, and ion heating mechanism are operated in steady state. Ion kinetic temperature is more than a factor of ten higher than electron temperature. The electric fields raise the ions to energies on the order of kilovolts and then point radially inward or outward. Plasma number density profiles are flat or triangular across the plasma diameter. It is suggested that the radial transport processes are nondiffusional and dominated by strong radial electric fields. These characteristics are caused by the absence of a second derivative in the density profile and the flat electron temperature profiles. If the electric field acting on the minor radius of the toroidal plasma points inward, plasma number density and confinement time are increased.

Roth, J. R.↗

Fine particulate capture device

To capture fine particulate matter in a gas such as air, a dielectric fluid is directed to the center of whichever face of a rotating disc is exposed to the air flow. The disc is comprised of two or more segments which bear opposite electrostatic potentials. As the dielectric fluid is centrifuged towards the periphery of the rotating disc, the fluid becomes charged to the same potential as the segment over which it is passing. Particulate matter is attracted to the charged segment and is captured by the fluid. The fluid then carries the captured particulate matter to a collection device such as a toroidal container disposed around the periphery of the disc. A grounded electrically-conductive ring may be disposed at the outer periphery of the disc to neutralize the captured particles and the fluid before they enter the container.

Peterson, V. S.↗

Microwave radiation measurements near the electron plasma frequency of the NASA Lewis Bumpy Torus plasma

Microwave emission near the electron plasma frequency of the NASA Lewis Bumpy Torus plasma has been observed, and its relation to the average electron density and the dc toroidal magnetic field was examined. The emission was detected using a spectrum analyzer and a 50-ohm miniature coaxial probe. The radiation appeared as a broad amplitude peak that shifted in frequency as the plasma parameters were varied. The observed radiation scanned an average plasma density ranging from 20 billion to 800 billion per cu cm. A linear relation was observed between the density calculated from the emission frequency and the average plasma density measured with a microwave interferometer. With the aid of a relative density profile measurement of the plasma, it was determined that the emissions occurred from the outer periphery of the plasma.

Mallavarpu, R.↗

Ion exchange with the solar wind for planets with negligible intrinsic magnetic fields

The exchange of ions between the ionosphere of a planet with negligible intrinsic magnetic field, and the solar wind is examined. It is suggested that a balance exists between the outflow of ionospheric ions at the plasmapause and ions from the solar wind in a restricted region close to the subsolar point. This results in a current system towards the subsolar point on the surface of the ionopause and a toroidal magnetic field. Simple calculations are made of the current and field configuration that might result from the system for conditions similar to those encountered on the Viking 1 and 2 transits of the Mars ionosphere.

Nisbet, J. S.↗

Plastic welder

Low-cost, self-contained, portable welder joins plastic parts by induction heating. Welder is useable in any atmosphere or in vacuum and with most types of thermoplastic; plastic components can be joined in situ. Device is applicable to aerospace industry and in automobile, furniture, and construction industries. Power requirements are easily met by battery or solar energy. In welder, toroidal inductor transfers magnetic flux through thermoplastic to screen. Heated screen causes plastic surface on either side to melt and flow into it to form joint.

Buckley, J. D.↗

Overview of NASA battery technology program

Highlights of NASA's technology program in batteries for space applications are presented. Program elements include: (1) advanced ambient temperature alkaline secondaries, which are primarily nickel-cadmium cells in batteries; (2) a toroidal nickel cadmium secondaries with multi-kilowatt-hour storage capacity primarily for lower orbital applications; (3) ambient temperature lithium batteries, both primary and secondaries, primarily silver hydrogen and high-capacity nickel hydrogen.

Riebling, R. W.↗

A solar extreme ultraviolet telescope and spectrograph for space shuttle. Volume 1: Investigation and technical plan

A scientific investigation of heating and mass transport in the solar corona that is currently planned for a future Shuttle/Spacelab flight is outlined. The instrument to be used is a near-normal incidence grating spectrograph fed by a grazing incidence Wolter Type 2 telescope. A toroidal grating design provides stigmatic images of the corona up to 8 arc min in extent over the spectral region from 225 A to 370 A. Spatial resolution of at least 2 arc sec and spectral resolution of 0.050 A is achievable throughout the central 4 arc min field or view. Primary scientific data are recorded on Schumann-type film. An H-alpha slit jaw monitor and zero order extreme ultraviolet monitor are also planned to support instrument operation.

Neupert, W. M.↗

Flow measurements in a model swirl combustor

Flow measurements in a model combustor composed of two confined coaxial swirling jets under noncombusting conditions are presented. Mean flow results are obtained for five different flow conditions to determine the effect of outer swirl on the recirculation zone (which is used for flame stabilization under combustion conditions). As the outer swirl magnitude is first decreased from maximum counter-swirl to zero and then increased to give co-swirl conditions, the size and the reverse flow velocity in the recirculation zone diminish. Detailed time mean and fluctuating flow measurements are obtained for a co-swirl and a counter-swirl condition with a directional pitot probe and hot-wire anenometry. For these two cases, recirculation zone occurs only with counter-swirl, near the exit of the inner jet. The recirculation zone is in the form of a one celled toroidal vortex having very low swirl velocity. Axial development of fluctuation levels, energy dissipation rates and turbulence length scales are described for the two flow conditions. Spectral analysis reveals periodic oscillations in both flows. The oscillations originate from the inner jet and up to 4 harmonics are observed. The fundamental frequencies are comparable to the rotational frequencies of the inner jets at the exit which are approximately under solid body rotation. The significance of the present results for the combustion process is discussed.

Vu, B. T.↗

Ring formation in rotating protostellar clouds

The formation of a ring during the dynamic collapse of a rotating gas cloud is shown to be an understandable physical phenomenon. By analytically integrating the equation of motion for particles in the equatorial plane of a rotating cloud which collapses in a gravitational potential well defined by a (1 - r-squared) mass density distribution the mechanism which initiates the growth of the toroidal structure is demonstrated. An analysis of the ring formation process indicates that the ring should develop in rotating, self-gravitating gas clouds which collapse from a wide range of axisymmetric intial conditions; the degree of central condensation and the initial distribution of angular momentum in a cloud should affect only the position and size of the developing ring. Ring formation, being a dynamic process in collapsing gas clouds, cannot be explained in terms of the classical ring instability that arises in rapidly rotating, equilibrium spheroids. Conditions in a cloud which should inhibit ring formation are also discussed.

Tohline, J. E.↗

A study of the Jovian forbidden line S II nebula at high spectral resolution

Observations of forbidden line S II 6716-6731 A emissions from the Jovian magnetosphere have been carried out with a PEPSIOS spectrometer at the Hale 5 m telescope. Spectral resolving power was sufficient to resolve the forbidden line S II line widths. From measured 6716-6731 A doublet ratios and spectral line widths a thermal plasma is found characterized by temperatures about 2 x 10 to the 4th K and electron densities about 2000 cu cm. The source of forbidden line S II emissions was centered within a toroidal region of radius 5 Jupiter radii (inside the orbit of Io), with tight latitudinal confinement near the equilibrium equator for ions in the tilted corotating Jovian magnetic field, and significant long-lived longitudinal structure.

Trauger, J. T.↗

Resistance Heater Helps Stirling-Engine Research

Stirling engine heater head consists of 18 double-turn coils of tubing, each of which is tightly wrapped with resistance-heating element, through which working gas flows. Coils form a toroid about periphery of heater-head body. With new resistance heater, total circuit resistance can be selected independently of tube geometry by changing size of wires and/or number of wire wraps around each tube.

Hoehn, F. W.↗