Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Section III”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Screening Assessment of Prospective CO 2 Storage Resource Potential in Saline Carbonate Systems, Central North Dakota Region

Conference presentation at 2023 Rocky Mountain Section-American Association of Petroleum Geologists (RMS-AAPG) Annual Meeting, Bismarck, ND, June 4–6, 2023. As part of the U.S. Department of Energy-funded North Dakota CarbonSAFE Phase III effort, a screening-level assessment was conducted over central North Dakota, including McLean, Mercer, and Morton Counties, to determine if viable CO 2 storage resource potential exists within carbonate saline reservoirs. Published literature and data from 173 wells were used in the study. The study focused on identifying carbonate saline reservoirs and suitable confining zones for CO 2 storage, with emphasis on three key questions: 1) are the carbonate saline reservoirs viable for CO 2 storage? 2) what is their range of storage resource potential? and 3) what are the main elements driving uncertainty and risk of potential capacity and containment?

20 FOSSIL-FUELED POWER PLANTS↗
NASA NTRS1998

Microphysics and Radiative Properties of Cirrus: Instrumentation and Analysis

This section summarizes the scientific questions which originated with participation in FIRE II in Coffeyville KA, evolved through participation in several field projects related to FIRE and culminated in participation in FIRE III in the Arctic in March / May 1998. It is noted that many of the ideas generated in FIRE II 1992 - 1995 and published under the grant involving the role of CCN in cirrus formation have been followed through in this grant and have also been central in the ideas for work under the SUCCESS project and the laboratory work currently supported by NSF.

Arnott, W. P.↗
NASA NTRS1977

Electron impact excitation of the electronic states of N2. III - Transitions in the 12.5-14.2-eV energy-loss region at incident energies of 40 and 60 eV

Analysis of electron energy-loss data at incident electron energies of 40 and 60 eV has led to the determination of normalized absolute differential cross sections for electron-impact excitation of five optically-allowed singlet states, two known triplet states, and two unknown triplet-like states of N2, lying in the energy-loss range 12.5-14.2 eV. The range of scattering angles was 5 to 138 deg. The optically allowed transitions and the known triplet excitations are identified. Cross sections for excitation to two unidentified triplet-like states at 13.155 and 13.395 eV were also obtained. The relationship of the generalized oscillator strength for the dipole-allowed states obtained from the described data to known optical oscillator strengths is discussed.

Chutjian, A.↗
NASA NTRS1984

Steps toward 8m honeycomb mirror blanks. III - 1.8m honeycomb sandwich blanks cast from borosilicate glass

The design, fabrication techniques, and equipment used for producing two 1.8-m honeycomb sandwich blanks, eventually leading to production of 8-m blanks, are reported. The procedure employed 85 cast hexagonal tiles at the bottom section, affixed against flotation by SiC bolts. The two plano concave mirrors are 1.83 m thick, weight 500 kg, and are each designed for 19 supports of astatic-lever type. Both blanks are of high quality and with an adequately low bubble content; one is to be figured to high-precision 0.25-arcsecond images, and is to be tested on the Multiple Mirror Telescope. Construction of a spin-casting facility based on the same principle is being planned for test-fabricating spin-cast mirrors on a smaller scale.

Angel, J. R. P.↗
NASA NTRS1989

Topology of large-scale structure. IV - Topology in two dimensions

In a recent series of papers, an algorithm was developed for quantitatively measuring the topology of the large-scale structure of the universe and this algorithm was applied to numerical models and to three-dimensional observational data sets. In this paper, it is shown that topological information can be derived from a two-dimensional cross section of a density field, and analytic expressions are given for a Gaussian random field. The application of a two-dimensional numerical algorithm for measuring topology to cross sections of three-dimensional models is demonstrated.

Melott, Adrian L.↗
DOE OSTI2025

Ultrawide bandgap semiconductor h-BN for direct detection of fast neutrons

III-nitride wide bandgap semiconductors have contributed on the grandest scale to many technological advances in lighting, displays, and power electronics. Among III-nitrides, BN has another unique application as a solid-state neutron detector material because the isotope B-10 is among a few elements that have an unusually large interaction cross section with thermal neutrons. A record high thermal neutron detection efficiency of 60% has been achieved by B-10 enriched h-BN detectors of 100 μm in thickness in our group. However, direct detection of fast neutrons with energies above 1 MeV is highly challenging due to the extremely low interaction cross section of fast neutrons with matter. We report the successful attainment of 0.4 mm thick freestanding h-BN 4"-diameter wafers, which enabled the demonstration of h-BN fast neutron detectors capable of delivering a detection efficiency of 2.2% in response to a bare AmBe neutron source. Furthermore, it was shown that the energy information of incoming fast neutrons is retained in the neutron pulse-height spectra. A comparison of characteristics between h-BN fast and thermal neutron detectors is summarized. Neutron detectors are vital diagnostic instruments for nuclear and fusion reactor power and safety monitoring, oil field exploration, neutron imaging and therapy, as well as for plasma and material science research. With the outstanding attributes resulting from its ultrawide bandgap (UWBG), including the ability to operate at extreme conditions of high power, voltage, and temperature, the availability of h-BN UWBG semiconductor detectors with the capability of simultaneously detecting thermal and fast neutrons with high efficiencies is expected to open unprecedented applications that are not possible to attain by any other types of neutron detectors.

36 MATERIALS SCIENCE↗
NASA NTRS1994

Far-infrared emission line spectroscopy of planetary nebulae from the KAO

The main focus of the overall project was to study the properties of planetary nebulae using far-infrared emission lines. The observations were conducted with the 'cooled grating spectrometer' or CGS, a moderate-resolution echelle spectrometer designed and built at the Ames Research Center. During the first few years of the program, the emphasis was on emission lines of doubly-ionized oxygen and nitrogen ((O III) 52 and 88 microns, (N III) 57 microns), which arise in the ionized regions of the nebulae. Starting around 1989, our emphasis shifted to observing fine-structure lines of neutral oxygen and singly-ionized carbon ((O I) 63 and 145 microns, (C II) 157 microns), which arise from predominantly neutral material outside the ionized regions. This program was typically assigned one or two observing flights per year. Because these studies required obtaining a substantial sample of objects in order to reach meaningful conclusions, publication of comprehensive papers summarizing all of the results is still pending. However, numerous interim reports based on the airborne results as well as on closely-related supporting observations have been published during the grant period. The bibliographic information for these reports is given in the publications section. An overall summary of the planetary nebula results was presented at the Airborne Astronomy Symposium (20th Anniversary of the KAO) on 8 July 1994; reprints will be provided when available. In parallel with the planetary nebula study, we also observed the (O III) and (N III) lines in several H II regions, and attempted (unsuccessfully) to detect these lines in several old nova remnants and the supernova remnant Cassiopeia A.

Dinerstein, Harriet L.↗
NASA NTRS1975

Program and charts for determining shock tube, and expansion tunnel flow quantities for real air

A computer program in FORTRAN 4 language was written to determine shock tube, expansion tube, and expansion tunnel flow quantities for real-air test gas. This program permits, as input data, a number of possible combinations of flow quantities generally measured during a test. The versatility of the program is enhanced by the inclusion of such effects as a standing or totally reflected shock at the secondary diaphragm, thermochemical-equilibrium flow expansion and frozen flow expansion for the expansion tube and expansion tunnel, attenuation of the flow in traversing the acceleration section of the expansion tube, real air as the acceleration gas, and the effect of wall boundary layer on the acceleration section air flow. Charts which provide a rapid estimation of expansion tube performance prior to a test are included.

Miller, C. G., III↗
DOE OSTI2022

Spatially resolved performance and degradation in a perfluorinated anion exchange membrane fuel cell

Anion exchange membrane fuel cells may enable future operation with non-precious metal-based catalysts. These systems have a delicate sensitivity to operating conditions such as humidification levels and the presence of CO2 in the air oxidant stream. We present spatially resolved in-situ performance results that shed light on phenomena that are unique to anion exchange membrane fuel cells. For cell construction, a highly conductive perfluorinated anion exchange polymer was used as the membrane and the material in powder form as the ionomer. Experiments were conducted to investigate the effects of humidification, fuel/oxidant concentration, and carbonation effects on the performance and its distribution in the cell. The results indicated that (i) dry conditions at the cathode have a stronger effect than at the anode on overall cell performance, (ii) performance significantly suffered when humidification was below 90%, (iii) fuel and oxidant dilution effects lead mass-transport losses and were stronger than flow rate effects, (iv) CO2 in the cathode feed stream creates an equilibration disparity between the inlet and outlet sections and CO2 purging is affected by flooding conditions, and (v) after >500 h of operation, performance deteriorates predominantly at the inlet.

2+1D fuel cell model↗
NASA NTRS1994

An overview of the Halogen Occultation Experiment (HALOE) and preliminary results

The Halogen Occultation Experiment (HALOE) experiment has observed vertical profiles and pressure versus latitude cross sections of temperature HCl, HF, CH4, H2O, NO, NO2, O3, and aerosols over the range from 80 deg S to 80 deg N. An in-orbit precision of better than 0.3 ppbv has been demonstrated for HCl, HF, NO, NO2 and less than 0.6 ppmv for the other channels. Comparisons with correlative measurements at this early stage are encouraging. Nitric oxide has been observed over the range from the upper troposphere to 130-km. Latitudinal cross sections of the long-lived tracers CH4 and HF show clear indications of the effect of the general circulation.

Russell, J. M., III↗
DOE OSTI2021

Unconventional Thermoelectric Materials for Energy Harvesting and Sensing Applications

Heat is an abundant but often wasted source of energy. Thus, harvesting just a portion of this tremendous amount of energy holds significant promise for a more sustainable society. While traditional solid-state inorganic semiconductors have dominated the research stage on thermal-to-electrical energy conversion, carbon-based semiconductors have recently attracted a great deal of attention as potential thermoelectric materials for low-temperature energy harvesting, primarily driven by the high abundance of their atomic elements, ease of processing/manufacturing, and intrinsically low thermal conductivity. This quest for new materials has resulted in the discovery of several new kinds of thermoelectric materials and concepts capable of converting a heat flux into an electrical current by means of various types of particles transporting the electric charge: (i) electrons, (ii) ions, and (iii) redox molecules. This has contributed to expanding the applications envisaged for thermoelectric materials far beyond simple conversion of heat into electricity. This is the motivation behind this review. This work is divided in three sections. In the first section, we present the basic principle of the thermoelectric effects when the particles transporting the electric charge are electrons, ions, and redox molecules and describe the conceptual differences between the three thermodiffusion phenomena. In the second section, we review the efforts made on developing devices exploiting these three effects and give a thorough understanding of what limits their performance. In the third section, we review the state-of-the-art thermoelectric materials investigated so far and provide a comprehensive understanding of what limits charge and energy transport in each of these classes of materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Structural Characterization of Potential Carbon Dioxide Reservoirs and Adjacent Strata within the Llandovery Silurian to Middle Devonian Strata of Ohio

The Midwest Regional Carbon Sequestration Partnership (MRCSP) has incorporated the work of geologic research teams (Geoteams) in its regional characterization, project planning and carbon dioxide (CO 2 ) injection implementation work since the partnership was established by the U.S. Department of Energy (DOE) in 2003. Over this 16-year period, the cohort of Geoteams has grown from five to ten states and has contributed to the characterization of geologic sequestration opportunities, refinement of reservoir and seal data, and supported injection efforts through both predictive and post-injection assessments. This report details the work led by the Ohio Department of Natural Resources, Division of Geological Survey to evaluate the structure of nine formations in the Appalachian Basin of Ohio to assess seal integrity and whether carbon dioxide (CO 2 ) migration pathways could pose a potential risk. As part of Phase II MRCSP work, the Pennsylvania Geological Survey led the characterization of the Llandovery Silurian (“middle Silurian”) to Middle Devonian regional geologic characterization CO 2 utilization and storage. This preliminary assessment included generalized, regional-scale mapping, as well as the development of relatively coarse structure and isochore maps of stratigraphic intervals of interest for the Appalachian Basin. Because this stratigraphic interval offers several enhanced oil recovery targets and secondary targets for CO 2 storage, the Ohio Geological Survey undertook efforts in Phase III to characterize the Ohio’s portion of the Appalachian Basin more precisely and to resolve inconsistencies within Ohio’s formation tops. This study refined the subsurface correlations of the Silurian-through-Devonian stratigraphic section in Ohio. Higher-resolution isochore mapping of the CO 2 storage reservoirs and seals provides greater detail of potential high-porosity zones and potential structural influence on the interval.

01 COAL, LIGNITE, AND PEAT↗
DOE OSTI2020

Validation of Numerical Models of the Offshore Wind Turbine From the Alpha Ventus Wind Farm Against Full-Scale Measurements Within OC5 Phase III

The main objective of the Offshore Code Comparison Collaboration Continuation, with Correlation (OC5) project is validation of aero-hydro-servo-elastic simulation tools for offshore wind turbines (OWTs) through comparison of simulated results to the response data of physical systems. Phase III of the OC5 project validates OWT models against the measurements recorded on a Senvion 5M wind turbine supported by the OWEC Quattropod from the alpha ventus offshore wind farm. The following operating conditions of the wind turbine were chosen for the validation: (1) idling below the cut-in wind speed, (2) rotor-nacelle assembly (RNA) rotation maneuver below the cut-in wind speed, (3) power production below and above the rated wind speed, and (4) shutdown. A number of validation load cases were defined based on these operating conditions. The following measurements were used for validation: (1) strains and accelerations recorded on the support structure and (2) pitch, yaw, and azimuth angles, generator speed, and electrical power recorded from the RNA. Strains were not directly available from the majority of the OWT simulation tools; therefore, strains were calculated based on out-of-plane bending moments, axial forces, and cross-sectional properties of the structural members. The simulation results and measurements were compared in terms of time series, discrete Fourier transforms, power spectral densities, and probability density functions of strains and accelerometers. A good match was achieved between the measurements and models setup by OC5 Phase III participants.

17 WIND ENERGY↗
NASA NTRS1949

Performance of Single-Stage Turbine of Mark 25 Torpedo Power Plant with Two Special Nozzles: Efficiency with Standard Rotor Blades - III

A Mark 25 torpedo power plant modified to operate as a single-stage turbine was investigated to determine the performance with two nozzle designs and a standard first-stage rotor having 0.40-inch blades with a 17O met-air angle. Both nozzles had smaller port cross-sectional areas than those nozzles of similar design, which were previously investigated. The performance of the two nozzles was compared on the basis of blade, rotor, and brake efficiencies as a function of blade-jet speed ratio for pressure ratios of 8, 15 (design), and 20. At pressure ratios of 15 and 20, the blade efficiency obtained with the nozzle having circular passages (K) was higher than that obtained with the nozzle having rectangular passages (J). At a pressure ratio of 8, the efficiencies obtained with the two nozzles were comparable for blade-jet speed ratios of less than 0.260. For blade-jet speed ratios exceeding this value, nozzle K yielded slightly higher efficiencies. The maximum blade efficiency of 0.569 was obtained with nozzle K at a pressure ratio of 8 and a blade-jet speed ratio of 0.295. At design speed and pressure ratio, nozzle K yielded a maximum blade efficiency of 0.534, an increase of 0.031 over that obtained with nozzle J. When the blade efficiencies of the two nozzles were compared with those of four other nozzles previously investigated, the maximum difference for the six nozzles with this rotor was 0.050. From, this comparison, no specific effect of nozzles size or shape on over-all performance was discernible.

Schum, Harold J.↗
DOE OSTI2023

Proceedings of the Maritime Risk Symposium 2022

The Maritime Risk Symposium (MRS) is an annual event focused on risks involving the global maritime transportation system (MTS) and has been hosted by a variety of universities and national laboratories. MRS 2022 was sponsored by the U.S. Coast Guard (USCG) and the Transportation Research Board of the National Academies of Science, Engineering, and Medicine. Argonne National Laboratory (Argonne) hosted MRS 2022 as a hybrid event, November 15–17, 2022, at the Argonne campus in Lemont, IL. The MRS 2022 agenda is presented in Section 11 of the proceedings. A total of 162 people participated in MRS 2022 with 115 in person and 47 virtual.

54 ENVIRONMENTAL SCIENCES↗
NASA NTRS1979

Proton collisional excitation in the lowest lying 3P terms of ions in the Be and Mg isoelectronic sequences

Proton collisional excitation cross sections and rate constants are presented for transitions between the 3P(J) fine-structure levels of the lowest-lying sp configurations in a number of astrophysically important ions belonging to the Be and Mg isoelectronic sequences. The calculations were made by direct integration of the Schroedinger equation resulting from semiclassical Coulomb excitation theory. The cross sections and rate constants for the 3P(J) transitions in the lowest-lying P(2) configurations are expected to be similar to those for the corresponding sp configuration transitions, and this is illustrated for C III. For the high-temperature ion Ca XVII alpha particle excitation is shown to be unimportant for situations involving ordinary values of the He/H abundance ratio. A simple, but apparently accurate method for determining certain radial integrals for low-lying excited configurations is proposed.

Landman, D. A.↗