Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SULFURIC ACID”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Planetary isophotes as a clue to aerosol characteristics. II - Observations of Venus from spacecraft

Contrary to published reports, the limb-darkening observed by Mariner 10 is consistent with the sulfuric-acid aerosol scattering that explains the polarization and spectroscopic features of Venus. A combination of both geometric and photometric systematic errors explains the previously reported discrepancy. Although the aerosol model cannot be distinguished from isotropic scattering at the Mariner 10 phase angle, Venera 9 data at larger phases clearly favor the aerosol model. There is no evidence for isotropic scattering in the clouds of Venus.

Young, A. T.↗

Venus - The 17- to 38-micron spectrum

A far-IR emission spectrum of Venus covering the wavelength range from 17 to 38 microns is examined which was obtained on five nights at an altitude of 14 km with the 30-cm telescope of the NASA Lear Jet. The spectrum is found to be characterized by an overall continuum level with noticeable absorption shortward of 20 microns and longward of 30 microns as compared with a 245-K blackbody. The continuum level is taken as implying a continuous source of opacity in the Venusian atmosphere over the entire range from 17 to 38 microns with increased opacity shortward of 20 microns and longward of 30 microns. It is shown that a haze of sulfuric acid droplets can provide the necessary opacity and explain the observed depressions. A pressure level of roughly 200 mb is deduced for this spectrum.

Reed, R. A.↗

Properties of the clouds of Venus, as inferred from airborne observations of its near-infrared reflectivity spectrum

The shape and absolute value of Venus' reflectivity spectrum is measured in the 1.2- to 4.0 micrometer spectral region with a circular variable filter wheel spectrometer having a spectral resolution of 1.5%. Comparing these spectra with synthetic spectra generated with a multiple-scattering computer code, a number of properties of the Venus clouds are inferred. Evidence is obtained indicating that the clouds are made of a water solution of sulfuric acid in their top unit optical depth, and that the clouds are made of this material down to an optical depth of at least 25. In addition, the acid concentration is 84 plus or minus 2% H2SO4 by weight in the top unit optical depth, the total optical depth of the clouds is 37.5 plus or minus 12.5, and the cross-sectional weighted mean particle radius lies between 0.5 and 1.4 micrometers in the top unit optical depth of the clouds. It is found that the average volume mixing ratio of H2SO4 and H2O contained in the cloud material both equal approximately 2 x 10 to the -6. Employing vapor pressure arguments, the acid concentration is shown to equal 84 plus or minus 6% at the cloud bottom and the water vapor mixing ratio beneath the clouds lies between 6 x 10 to the -4 and 10 to the -2.

Pollack, J. B.↗

Substitution for chromium in 304 stainless steel

An investigation was conducted to determine the effects of substituting less strategic elements for Cr on oxidation and corrosion resistance of AISI 304 stainless steel. Cyclic oxidation resistance was evaluated at 870 C. Corrosion resistance was determined by exposure of specimens to a boiling copper-rich solution of copper sulfate and sulfuric acid. Alloy substitutes for Cr included Al, Mn, Mo, Si, Ti, V, Y, and misch metal. A level of about 12% Cr was the minimum amount of Cr required for adequate oxidation and corrosion resistance in the modified composition 304 stainless steels. This represents a Cr saving of 33 percent. Two alloys containing 12% Cr plus 2% Al plus 2% Mo and 12% Cr plus 2.65% Si were identified which exhibited oxidation and corrosion resistance comparable to AISI 304 stainless steel.

Stephens, J. R.↗

Removing overcoatings from microcircuits

Silicone resin of elastomer overcoatings are removed more quickly from microcircuit chips with hot concentrated sulfuric acid. Process takes few minutes as compared to day or two, using commercial solvents based on toluene, xylene, and like. Overcoatings are removed to expose circuit for failure analysis.

Belcher, J. G., Jr.↗

Infrared radiation of Venusian clouds

The thermal infrared emission of Venus measured by Venera-9 and Venera-10 is analyzed. The emission of the night side corresponds to a brightness temperature of 244 K. The brightest temperature of the day side is 233-234 K. The extent of the upper layer of clouds, in which the thermal emission is formed, is 4-6 km. The altitude of the emitting layer above the surface of the planet (64-67 km) is determined from the brightness temperature and the existing models of the atmosphere of Venus. In some cases, correlation is noted between the inhomogeneity and the details of the ultraviolet image. The day side temperatures strangely coincide with the freezing point of sulfuric acid at a concentration of 66-77%.

Ksanfomaliti, L. V.↗

Cloud microphysics - Analysis of the clouds of Earth, Venus, Mars, and Jupiter

The probable microphysics of a cloud is deduced by a described method which requires information on cloud particle mean size, composition, number density, and atmospheric structure, but does not require any additional information. The analysis is applied to the sulfuric acid clouds of Venus, the water ice and dust clouds of Mars, and the ammonia-water and ammonia ice clouds of Jupiter. The Venus cloud layer is found to have some resemblance to smog and haze layers on earth. The water ice clouds on Mars resemble tenuous nonprecipitating cirrus clouds on earth. Precipitation, vertical distribution of gases, and vertical transport of heat in the clouds on Jupiter are considered.

Rossow, W. B.↗

Stratospheric aerosols and climatic change

Stratospht1ic sulfuric acid particles scatter and absorb sunlight and they scatter, absorb and emit terrestrial thermal radiation. These interactions play a role in the earth's radiation balance and therefore affect climate. The stratospheric aerosols are perturbed by volcanic injection of SO2 and ash, by aircraft injection of SO2, by rocket exhaust of Al2O3 and by tropospheric mixing of particles and pollutant SO2 and COS. In order to assess the effects of these perturbations on climate, the effects of the aerosols on the radiation balance must be understood and in order to understand the radiation effects the properties of the aerosols must be known. The discussion covers the aerosols' effect on the radiation balance. It is shown that the aerosol size distribution controls whether the aerosols will tend to warm or cool the earth's surface. Calculations of aerosol properties, including size distribution, for various perturbation sources are carried out on the basis of an aerosol model. Calculations are also presented of the climatic impact of perturbed aerosols due to volcanic eruptions and Space Shuttle flights.

Toon, O. B.↗

Nitrogen-sulfur compounds in stratospheric aerosols

Two forms of nitrosyl sulfuric acid (NOHSO4 and NOHS2O7) have been tentatively identified in stratospheric aerosols. The first of these can be formed either directly from gas reactions of NO2 with SO2 or by gas-particle interactions between NO2 and H2SO4. The second product may form when SO3 is involved. Estimates based on these reactions suggest that the maximum quantity of NO that might be absorbed in stratospheric aerosols could vary from one-third to twice the amount of NO in the surrounding air. If these reactions occur in the stratosphere, then a mechanism exists for removing nitrogen oxides from that region by aerosol particle fallout. This process may typify another natural means that helps cleanse the lower stratosphere of excessive pollutants.

Farlow, N. H.↗

Orbiter cloud photopolarimeter investigation

Polarization measurements by the orbiter cloud photopolarimeter indicate the presence of a planet-wide layer of submicrometer aerosols of substantial visible optical thickness, of the order of 0.05 to 0.01, in the lower stratosphere well above the main visible sulfuric acid cloud layer. Cloud pattern characteristics found by Mariner 10 and by Pioneer are compared. Planetary scale markings, polar region clouds, and cellular features are considered.

Travis, L. D.↗

Venus lower atmospheric composition - Analysis by gas chromatography

The first gas chromatographic analysis of the lower atmosphere of Venus is reported. Three atmospheric samples were analyzed. The third of these samples showed carbon dioxide (96.4 percent), molecular nitrogen (3.41 percent), water vapor (0.135 percent), molecular oxygen (69.3 ppm), argon (18.6 ppm), neon (4.31 ppm), and sulfur dioxide (186 ppm). The amounts of water vapor and sulfur dioxide detected are roughly compatible with the requirements of greenhouse models of the high surface temperature of Venus. The large positive gradient of sulfur dioxide, molecular oxygen, and water vapor from the cloud tops to their bottoms, as implied by Earth-based observations and these results, gives added support for the presence of major quantities of aqueous sulfuric acid in the clouds. A comparison of the inventory of inert gases found in the atmospheres of Venus, Earth, and Mars suggests that these components are due to outgassing from the planetary interiors.

Oyama, V. I.↗

COS in the stratosphere

Carbonyl sulfide (COS) has been detected in the stratosphere, and mixing ratio measurements are reported for altitudes of 15.2 to 31.2 km. A large volume, cryogenic sampling system mounted on board a U-2 aircraft has been used for lower stratosphere measurements and a balloon platform for measurement at 31.2 km. These observations and measurements strongly support the concept that stratospheric COS is an important precursor in the formation of sulfuric acid aerosols.

Inn, E. C. Y.↗

The 12- to 20-micron spectrum of Venus - Implications for temperature and cloud structure

The spectrum of Venus was measured between approximately 500 and 800 kaysers (12 to 20 microns) at a resolution of 3.12 kaysers from the NASA C141 G. P. Kuiper Airborne Observatory on 22 and 24 February 1977. The spectrum clearly shows the detailed structure of CO2 absorption in the vicinity of the nu-2 fundamental band at 667 kaysers. In addition, details of model fitting demonstrate the possibility for a cold and thin haze of sulfuric acid droplets along with an optically opaque cloud top near 250 K. Such clouds represent major differences from other H2SO4 main cloud deck models in the recent literature and may be indicative of changes in the vertical distribution of aerosols on a global scale. The temperatures retrieved for pressures at or below 10 mbar are largely independent of the cloud model assumed and they are some 16 to 20 K warmer than the 1972 NASA model. All retrieved temperatures lie within the range of Mariner 5 and Mariner 10 radio occultation inversion results.

Aumann, H. H.↗

Wavelength dependence of polarization. XXXIV - Observations of Venus

Polarimetric observations of linear polarization on Venus are presented. The observations, which cover nine small disk areas as well as the whole disk, were made with seven filters between 0.3 and 1 micron and also with three filters in the range from 1.2 to 2.2 microns. A polarization wavelength dependence is determined which appears to confirm Landau's (1975) discovery of a steep rise in polarization near 3 microns. The dark UV markings on Venus are shown to be regions of more positive UV polarization and are interpreted as a general feature of a gaseous atmosphere in which sulfuric acid droplets are suspended.

Gehrels, T.↗

The ultraviolet markings on Venus - An analysis of the Venera 9 data

The results of Venera 9 measurements of the emergent intensity from the cloud tops of Venus are surveyed. It is reported that these radiance distributions at 3500 A contain information on the vertical and horizontal structure of the clouds and show the effects of the small and large scale ultra violet markings. Attention is given to model calculations with a Mie phase function for 1.05 micron sulfuric acid aerosols which indicate that the clouds have a layered structure. It is stressed that large-scale horizontal inhomogeneities (in excess of 1000 km) must be considered to supplement any analysis based on a horizontally homogeneous model. It is shown that the shape of the observed radiance distributions is affected by the ultraviolet 'Y' feature and the equatorial band.

Lestrade, J. P.↗

The chemistry of Venus' atmosphere

A model for the Venus atmosphere involving photochemistry of oxygen, hydrogen, chlorine and sulfur species is presented. Sulfur reaction schemes and hydrogen and chlorine reaction schemes were included. The impact of sulfur on the oxygen budget and the subsequent production of H2SO4 molecules for the Venus cloud deck were explored. A major new reaction scheme for production of H2SO4 molecules involving sulfur and oxygen chemistry was established shown to dominate over the odd hydrogen scheme proposed earlier. The efficiency of the scheme in formation of H2SO4 is only about 50%, with the remaining sulfur residing in SO2 molecules. The calculated downward flux of H2SO4 may be sufficient to maintain a steady state sulfuric acid cloud if the resident time of H2SO4 droplets in the cloud is as long as a few years. If however, the resident time is half a year or shorter, additional chemistry capable of more efficient conversion of SO2 to SO3 is required.

Sze, N. D.↗

Imaging and polarimetry with the Pioneer Venus Orbiter Cloud Photopolarimeter

The objective of the Orbiter Cloud Photopolarimeter (OCPP) on board the Pioneer Venus Orbiter spacecraft is twofold: (1) to determine the physical properties, vertical and horizontal distribution and the temporal variability of the haze and cloud aerosols on Venus; and (2) to record in images made in the near ultraviolet the varying cloud morphology and the short- and long-term character of the apparent cloud motions. Early images exhibit numerous cloud features and apparent circulation patterns similar to those observed by Mariner 10 in 1974. Features of the polar regions are identified. Polarimetry measurements indicate that the main visible cloud layer of 1-micron-radius sulfuric acid droplets is covered at least in the morning terminator region with a thin haze layer consisting of submicron-size particles. The OCPP performance appears to be excellent.

Travis, L. D.↗

Improved ceramic heat exchanger materials

The development and evaluation of materials for potential application as heat exchanger structures in automotive gas turbine engines is discussed. Test specimens in the form of small monolithic bars were evaluated for thermal expansion and dimensional stability before and after exposure to sea salt and sulfuric acid, followed by short and long term cycling at temperatures up to 1200 C. The material finally selected, GE-7808, consists of the oxides, ZrO2-MgO-Al2O3-S1O2, and is described generically as ZrMAS. The original version was based on a commercially available cordierite (MAS) frit. However, a clay/talc mixture was demonstrated to be a satisfactory very low cost source of the cordierite (MAS) phase. Several full size honeycomb regenerator cores, about 10.2 cm thick and 55 cm diameter were fabricated from both the frit and mineral versions of GE-7808. The honeycomb cells in these cores had rectangular dimensions of about 0.5 mm x 2.5 mm and a wall thickness of approximately 0.2 mm. The test data show that GE-7808 is significantly more stable at 1100 C in the presence of sodium than the aluminosilicate reference materials. In addition, thermal exposure up to 1100 C, with and without sodium present, results in essentially no change in thermal expansion of GE-7808.

Rauch, H. W.↗