Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STRESS FUNCTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Tracking Seasonal and Interannual Variability in Photosynthetic Downregulation in Response to Water Stress at a Temperate Deciduous Forest

Abstract The understanding and modeling of photosynthetic dynamics affected by climate variability can be highly uncertain. In this paper, we examined a well‐characterized eddy covariance site in a drought‐prone temperate deciduous broadleaf forest combining tower measurements and satellite observations. We find that an increase in spring temperature usually leads to enhanced spring gross primary production (GPP), but a GPP reduction in late growing season due to water limitation. We evaluated how well a coupled fluorescence‐photosynthesis model (SCOPE) and satellite data sets track the interannual and seasonal variations of tower GPP from 2007 to 2016. In SCOPE, a simple stress factor scaling of Vcmax as a linear function of observed predawn leaf water potential ( ψ pd ) shows a good agreement between modeled and measured interannual variations in both GPP and solar‐induced chlorophyll fluorescence (SIF) from the Global Ozone Monitoring Experiment‐2 (GOME‐2). The modeled and satellite‐observed changes in SIF yield are ~30% smaller than corresponding changes in light use efficiency (LUE) under severe stress, for which a common linear SIF to GPP scaling would underestimate the stress reduction in GPP. Overall, GOME‐2 SIF tracks interannual tower GPP variations better than satellite vegetations indices (VIs) representing canopy “greenness.” However, it is still challenging to attribute observed SIF variations unequivocally to greenness or physiological changes due to large GOME‐2 footprint. Higher‐resolution SIF data sets (e.g., TROPOMI) already show the potential to well capture the downregulation of late‐season GPP and could pave the way to better disentangle canopy structural and physiological changes in the future.

He, Liyin↗
DOE OSTI2022

Magneto-Mechanical Optimization of Cross-Sections for $ \text{cos}(\theta)$Accelerator Magnets

The cross-section design of cos (θ) superconducting magnets is historically developed in a two-step process: initially, the coil geometry is defined on the basis of magnetic optimizations; then, the structure is designed around the coil. The first step searches for the best coil cross-section maximizing the magnetic field, margin, field quality and conductor efficiency. The latter step aims at limiting the coil stresses and deformations. However, the coil design, defined with the initial magnetic optimization, can influence the mechanical behaviour of the magnet, altering, for example, the peak stress during operation. As the critical current is a function of the applied strain, the mechanical implications of the coil cross-section design can limit the achievable performance. In this paper we propose an integrated optimization process that targets the peak stress on the conductor in addition to the magnetic objectives. Here the results are presented for a sample high-field Nb 3 Sn dipole: a 4-layer design aiming at ultimate conductor performance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2025

Green's function fast multipole method for continuum mechanics (SM-FMM)

Solid Mechanics Fast Multipole Method based on elastic Green's function and accelerated using FFTs The code calculates the mechanical fields (stress and strain) for a heterogeneous elasto-plastic material unit cell under quasi-static conditions (no dynamic effects). The fields are calculated using a Green's function method, where the strain field is given by a discrete convolution of Green's operator with an auxiliary stress field. The convolution is calculated using the fast multipole method.

Zecevic, Miroslav↗
DOE OSTI2021

Scaling of the mean transverse flow and Reynolds shear stress in turbulent plane jet

Here, proper scaling for the mean transverse flow and Reynolds shear stress in a turbulent plane jet is determined using a scaling patch approach. By seeking an admissible scaling, a key concept in the scaling patch approach, for the mean continuity equation, a proper scale for the mean transverse flow in a turbulent plane jet is found as V ref = –δdU ctr /dx, where δ is the jet half width and dU ctr /dx is the decay rate of the mean axial velocity at the jet centerline. By seeking an admissible scaling for the mean axial momentum equation, a proper scale for the kinematic Reynolds shear stress is found as R uv,ref =U ctr V ref , which is a mix of the velocity scales in the axial and transverse directions. Approximation functions for the scaled mean transverse flow and Reynolds shear stress are developed and found to agree well with experimental and numerical data. Similarities and differences between the scales of the mean transverse flow and Reynolds shear stress in turbulent plane jets and zero-pressure-gradient turbulent boundary layer flows are clarified.

42 ENGINEERING↗
DOE OSTI2021

Dissipation measures in weakly collisional plasmas

ABSTRACT The physical foundations of the dissipation of energy and the associated heating in weakly collisional plasmas are poorly understood. Here, we compare and contrast several measures that have been used to characterize energy dissipation and kinetic-scale conversion in plasmas by means of a suite of kinetic numerical simulations describing both magnetic reconnection and decaying plasma turbulence. We adopt three different numerical codes that can also include interparticle collisions: the fully kinetic particle-in-cell vpic, the fully kinetic continuum Gkeyll, and the Eulerian Hybrid Vlasov–Maxwell (HVM) code. We differentiate between (i) four energy-based parameters, whose definition is related to energy transfer in a fluid description of a plasma, and (ii) four distribution function-based parameters, requiring knowledge of the particle velocity distribution function. There is an overall agreement between the dissipation measures obtained in the PIC and continuum reconnection simulations, with slight differences due to the presence/absence of secondary islands in the two simulations. There are also many qualitative similarities between the signatures in the reconnection simulations and the self-consistent current sheets that form in turbulence, although the latter exhibits significant variations compared to the reconnection results. All the parameters confirm that dissipation occurs close to regions of intense magnetic stresses, thus exhibiting local correlation. The distribution function-based measures show a broader width compared to energy-based proxies, suggesting that energy transfer is co-localized at coherent structures, but can affect the particle distribution function in wider regions. The effect of interparticle collisions on these parameters is finally discussed.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Chlamydomonas as a model for reactive oxygen species signaling and thiol redox regulation in the green lineage

While the maintenance of redox balance is important for all organisms, the energy balance in the chloroplast is particularly tightly linked to the overall cellular redox status in photosynthetic organisms. Excess light can cause overreduction of the photosynthetic electron transport chain, which, when unchecked, results in the generation of reactive oxygen species (ROS) that can oxidize cellular components including nucleic acids, proteins, and lipids (Li et al., 2009). A photosynthetic cell possesses multiple layers of defense against oxidative stress, such as antioxidant enzymes (Foyer and Noctor, 2005) and alternative electron transfer pathways (Alric and Johnson, 2017). At the same time, ROS can function as important signals that mediate responses to biotic and abiotic stresses (Apel and Hirt, 2004). Reversibly oxidizable small molecules and proteins can serve as ROS sinks and signals and are re-reduced by multiple mechanisms. For example, the ascorbate–glutathione (GSH) cycle is central in controlling ROS levels and regenerating/reducing oxidized cellular redox agents (Figure 1A; reviewed by Foyer and Noctor, 2011). The functions of many proteins can be regulated by the redox state of cysteine residues, such as the formation or reduction of disulfides by thioredoxins (TRX) (Buchanan, 1991) and glutaredoxins (Michelet et al., 2013b; Figure 1, B and C).

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2021

The aging proteostasis decline: From nematode to human

The aging proteostasis decline manifests in a failure of aging cells and organisms to properly respond to proteotoxic challenges. This proteostasis collapse has long been considered a hallmark of aging in nematodes, and has recently been shown to occur also in human cells upon entry to senescence, opening the way to exploring the phenomenon in the broader context of human aging. Cellular senescence is part of the normal human physiology of aging, with senescent cell accumulation as a prominent feature of aged tissues. Being highly resistant to cell death, senescent cells, as they accumulate, become pro-inflammatory and promote disease. Here we discuss the causes of human senescence proteostasis decline, in view of the current literature on nematodes, on the one hand, and senescence, on the other hand. We review two major aspects of the phenomenon: (1) the decline in transcriptional activation of stress-response pathways, and (2) impairments in proteasome function. We further outline potential underlying mechanisms of transcriptional proteostasis decline, focusing on reduced chromatin dynamics and compromised nuclear integrity. Finally, we discuss potential strategies for reinforcing proteostasis as a means to improve organismal health and address the relationship to senolytics.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2025

Adaptive modification of antiviral defense systems in microbial community under Cr-induced stress

Background The prokaryotic antiviral defense systems are crucial for mediating prokaryote-virus interactions that influence microbiome functioning and evolutionary dynamics. Despite the prevalence and significance of prokaryotic antiviral defense systems, their responses to abiotic stress and ecological consequences remain poorly understood in soil ecosystems. We established microcosm systems with varying concentrations of hexavalent chromium (Cr(VI)) to investigate the adaptive modifications of prokaryotic antiviral defense systems under abiotic stress. Results Utilizing hybrid metagenomic assembly with long-read and short-read sequencing, we discovered that anti- viral defense systems were more diverse and prevalent in heavily polluted soils, which was corroborated by meta-analyses of public datasets from various heavy metal-contaminated sites. As the Cr(VI) concentration increased, prokaryotes with defense systems favoring prokaryote-virus mutualism gradually supplanted those with defense systems incurring high adaptive costs. Additionally, as Cr(VI) concentrations increased, enriched antiviral defense systems exhibited synchronization with microbial heavy metal resistance genes. Furthermore, the proportion of antiviral defense systems carried by mobile genetic elements (MGEs), including plasmids and viruses, increased by approximately 43% and 39%, respectively, with rising Cr concentrations. This trend is conducive to strengthening the dissemination and sharing of defense resources within microbial communities. Conclusions Overall, our study reveals the adaptive modification of prokaryotic antiviral defense systems in soil ecosystems under abiotic stress, as well as their positive contributions to establishing prokaryote-virus mutualism and the evolution of microbial heavy metal resistance. These findings advance our understanding of microbial adaptation in stressful environments and may inspire novel approaches for microbiome manipulation and bioremediation.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2022

Experiments and Modeling of Proppant Embedment and Fracture Conductivity for the Caney Shale, Oklahoma, USA

ABSTRACT: The ultimate aim of hydraulic fracturing is to have a long and conductive flow path that extends from the wellbore into the formation. The effective fracture length is part of a hydraulically propped fracture which contributes to production. The difficulty in achieving economical production targets from shale reservoirs is at the forefront in many exploration companies. Fracture conductivity loss is related to; proppant embedment under depletion, proppant crushing, damage as a result of fracturing fluid, fines migration and proppant-pack permeability-damage are some of the factors that contribute to production decline after hydraulic fracturing in shale reservoirs. The Caney Shale is a calcareous organic-rich mudrock. Various studies have investigated the effect that clay on shale well productivity, however, there is currently no literature on the Caney shale in relation to horizontal wells; all available literature exists in vertical wells as well as on formations of the Caney that are shallow in comparison to an emerging play which is twice the depth. In this paper we investigate stress-dependent fracture conductivity of proppant-filled fractures and proppant embedment in Caney shale through laboratory and modeling studies. API fracture conductivity tests were conducted using 2% KCl on five locations within the Caney shale that consisted of selecting three brittle(reservoir) zones and two ductile zones. Confining pressures range from 1,000 psi to 12,000 psi at 210°F. Conductivity, permeability as well as embedment were measured during the test. Our experimental results have confirmed that improved fracture conductivity is attributed to; proppant size, the increase in porosity of the proppant pack, closure pressure changes and the reduction in fracture conductivity are a function of many factors such as fracture closure stress. The findings from this study could help the stimulation design by providing new insights into the critical factors that are to be determined to facilitate the choice of proppants as well as fracturing fluids for long term production and recovery from shale reservoirs. 1 INTRODUCTION The development of low permeability formations, like shales, has been aided by hydraulic fracturing of horizontal wells (Radonjic et al., 2020). Hydraulic fracturing fluid is injected at a high pressure to induce tensile fractures that can link to and stimulate natural fractures (Katende et al., 2021a,b). Preserving adequate conductivity in hydraulic fractures over the life of the wells is required for economic production; nevertheless, conserving such conductivity can be difficult in some circumstances, particularly in soft, clay-rich formations (Wang et al., 2021). Proppant particles help to keep the fractures open when the pumping stops and the fracturing fluid returns to the wellbore, producing one or more propped hydraulic fractures of varying length, breadth, and height (Katende et al., 2021a). The proppant pack within the hydraulic fracture boosts well output by providing a greater permeability flowpath for hydrocarbons (Duenckel et al., 2016). Proppant in the fracture is under complicated stress conditions, and the interplay between the rock formation and the proppant pack has a significant impact on proppant-pack permeability (Karazincir et al., 2019). Proppant may be embedded (Katende et al., 2021a) in the rock or crushed into small pieces if the proppant size and strength characteristics are not specified appropriately, resulting in a loss in proppant-pack permeability and fracture aperture, and consequently a fall in well output.

Katende, A.↗
DOE OSTI2020

Optimization of the Reax force field for the lithium–oxygen system using a high fidelity charge model

Studies using molecular dynamics (MD) have long struggled to simulate the failure modes of materials, predicting unrealistically high ductility and failing to capture brittle fracture. The primary cause of this shortcoming is an inadequate description of bond breaking. While reactive force fields such as ReaxFF show improvements compared to traditional force fields, the charge models used yield unphysical partial charges, especially during dissociation of ionic bonds. This flaw may be remedied by using the atom-condensed Kohn–Sham density functional theory (DFT) approximated to a second order (ACKS2) charge model for determining partial charges. In this work, we present a new ACKS2-enabled Reax force field for fracture simulations of lithium oxide systems, which was obtained by training against an extensive set of DFT, multireference configuration interaction (MRCI), and MRCI+Q reference data using genetic optimization techniques. This new force field significantly improves the bond breaking behavior, but still cannot fully capture the brittle fracture in MD simulations, suggesting more research is needed to improve simulation of brittle fracture.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Impact of shading following installation of agrivoltaic systems on eco-physiological and biochemical attributes of “Howes” cranberry in Massachusetts

Agrivoltaic (AV) systems, which integrate solar energy generation with crop production on the same piece of land, offer a sustainable solution for optimizing land-use efficiency. However, the impact of shading induced by solar panels on crop growth, physiology, and metabolic activities of cranberry is not known. Understanding these interactions is essential for assessing the feasibility of AV systems in cranberry production. In this study we evaluated eco-physiological and biochemical crop responses on a commercial ‘Howes’ cranberry bog grown under an agrivoltaics system using different row spacings in the year immediately following installation. Following installation of fixed tilt solar panels at a height of 3.0 m above the plant canopy, four shading treatments were evaluated: an uncovered control area and row spacings of 9.0 m, 7.0 m, and 5.0 m, corresponding to 30%, 35%, and 37% shading respectively. The shading effect was also evaluated at three different fruit developmental stages (green, blush, and full-red stage). Using microclimate sensors installed in the treatment areas, key eco-physiological and biochemical parameters, including leaf gas exchange, chlorophyll, anthocyanin, and antioxidant content, electrolyte leakage, proline and trehalose accumulation, were assessed. While moderate shading (30% and 35%) alleviated environmental stress, as reflected by improved leaf water status and reduced electrolyte leakage, these same treatments suppressed key physiological and metabolic functions, including photosynthetic activity, carbon reserve accumulation, and the biosynthesis of stress-related osmolytes and antioxidant compounds. Under higher shading (37%), these reductions were even more pronounced, indicating a potential threshold beyond which the benefits of shading are outweighed by declines in assimilate production and secondary metabolism. These findings highlight a trade-off between the stress-mitigating benefits of shading and the alterations in key physiological and metabolic processes under agrivoltaic systems. Minimizing these trade-offs by optimizing row spacing in agrivoltaics systems is critical to maintain cranberry physiological status. Since commercial cranberry is grown as a continuous plant canopy (no interrow spaces for equipment travel), damage caused by the installation process likely impacted crop response evaluated in the first year; multi-year studies are needed to fully understand the dynamics of a dual-use system. Notably, this work provides the first direct measurements of proline, trehalose content, and electrolyte leakage in cranberry grown under AV conditions, offering new insight into their physiological adjustments to shading.

14 SOLAR ENERGY↗
DOE OSTI2023

A fully coupled thermal–microstructural–mechanical finite element process model for directed energy deposition additive manufacturing of Ti–6Al–4V

A fully coupled thermal–microstructural–mechanical finite element modelling framework is developed to investigate the distortion and residual stresses during directed energy deposition (DED) of multi-phase Ti–6Al–4V alloy. The Johnson–Cook constitutive model is used to predict the yield strength of each phase as a function of strain, strain rate and temperature where the flow stress is calculated by a linear mixing rule based on the volumetric phase fractions. A thin-walled rectangular sample is chosen as the reference geometry and the results are compared with experimentally measured in situ thermal history and distortion data, where a reasonable agreement is achieved. The proposed modelling framework with physics-based material constitutive model provides useful information for a better understanding of process–microstructure–property relations in additive manufacturing by DED.

Tunay, Merve↗
DOE OSTI2020

Transcriptome Analysis of Drought-Resistant and Drought-Sensitive Sorghum ( Sorghum bicolor ) Genotypes in Response to PEG-Induced Drought Stress

Drought is a major limiting factor of crop yields. In response to drought, plants reprogram their gene expression, which ultimately regulates a multitude of biochemical and physiological processes. The timing of this reprogramming and the nature of the drought-regulated genes in different genotypes are thought to confer differential tolerance to drought stress. Sorghum is a highly drought-tolerant crop and has been increasingly used as a model cereal to identify genes that confer tolerance. Also, there is considerable natural variation in resistance to drought in different sorghum genotypes. Here, we evaluated drought resistance in four genotypes to polyethylene glycol (PEG)-induced drought stress at the seedling stage and performed transcriptome analysis in seedlings of sorghum genotypes that are either drought-resistant or drought-sensitive to identify drought-regulated changes in gene expression that are unique to drought-resistant genotypes of sorghum. Our analysis revealed that about 180 genes are differentially regulated in response to drought stress only in drought-resistant genotypes and most of these (over 70%) are up-regulated in response to drought. Among these, about 70 genes are novel with no known function and the remaining are transcription factors, signaling and stress-related proteins implicated in drought tolerance in other crops. This study revealed a set of drought-regulated genes, including many genes encoding uncharacterized proteins that are associated with drought tolerance at the seedling stage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Simulations of a hypersonic turbulent boundary layer over wavy surfaces

Here, we conduct large-eddy simulations of a Mach 5.84 cold wall turbulent boundary layer over one-dimensional wavy walls with varying amplitudes and wavelengths. Across all wall topologies, a series of alternating shock and expansion waves is shown to influence the entire boundary layer, and generate repeating wave patterns in the turbulent stresses, dispersive stresses, and turbulent kinetic energy budget. The series of alternating shocks and expansions imposes repeating adverse and favourable pressure gradients across the wavy wall, and at sufficient wall amplitude, triggers flow separation in the trough of the wave. Flow separation is demonstrated to influence the behaviour of wall pressure fluctuations over the wavy wall. In attached flows, the prominent frequencies are consistent with integral-scale boundary layer turbulence, whereas in separated flows, a two-decade frequency range is present, akin to two-dimensional shock–boundary layer interactions. Counter-rotating streamwise-oriented structures are observed on the windward side of the wave, which diminish over the wave crest. A conditional analysis demonstrates that these structures are present in the upstream boundary layer, and are amplified with increasing wall amplitude. An examination of the Görtler number and probability density function (PDF) of the fluctuating lateral wall shear stress demonstrates the strong correlation between a large Görtler number and growth of the PDF tail density, suggesting that the amplification of the counter-rotating streamwise-oriented structures are linked to centrifugal instabilities in regions of streamline concavity.

boundary layers↗
DOE OSTI2020

Tailoring ductile-phase toughened tungsten hierarchical microstructures for plasma-facing materials

Biological materials, such as bones, nacre, etc., have been found to show attractive and unique combinations of stiffness, strength and fracture toughness. Research has been conducted in various engineering areas to mimic the naturally hierarchical microstructures or nanostructures of these materials to produce materials with optimum stiffness, high strength and fracture toughness for their intended structural applications. In the same objective, this work applies a multiscale microstructural approach recently developed to investigate the deformation and fracture behavior of ductile phase toughened tungsten (W) materials such as tungsten-nickel/iron (W-Ni/Fe) composites that possess lamellar-like and hierarchical “brick-and-mortar” (BAM) microstructures. First, the approach is used to simulate tensile loading of W-Ni/Fe specimens cut out from hot-rolled W-Ni/Fe plates which possess lamellar-like microstructures. The finite element model of the gage section of the specimen consists of a W-Ni/Fe dual-phase microstructural domain in which the constitutive behaviors of W and Ni/Fe phases are described by an elastic-plastic damage model. The predicted material stress-strain response and crack pattern development as a function of loading are then compared to the corresponding experimental results to determine the constitutive model parameters for W and Ni/Fe. Subsequently, the model parameters are used to analyze W-Ni/Fe BAM microstructures that are artificially created to investigate the effects of microstructural features and morphologies on the composite stress-strain response, damage, and fracture patterns. The modeling shows that regular BAM microstructures that experience bridging mechanism combined with crack penetration across W-phase regions exhibit significantly higher strengths than the rather random lamellar-like microstructures. More significantly, however adjusting the brick’s length-to-height ratio, the BAM microstructure can be designed to allow a more distributed damage zone which leads to increased strength, ductility and fracture energy.

36 MATERIALS SCIENCE↗
DOE OSTI2025

The Pseudoenzyme β‐Amylase9 From Arabidopsis Activates α‐Amylase3: A Possible Mechanism to Promote Stress‐Induced Starch Degradation

ABSTRACT Starch accumulation in plants provides carbon for nighttime use, for regrowth after periods of dormancy, and for times of stress. Both ɑ‐ and β‐amylases (AMYs and BAMs, respectively) catalyze starch hydrolysis, but their functional roles are unclear. Moreover, the presence of catalytically inactive amylases that show starch excess phenotypes when deleted presents questions on how starch degradation is regulated. Plants lacking one of these catalytically inactive β‐amylases, BAM9, have enhanced starch accumulation when combined with mutations in BAM1 and BAM3, the primary starch degrading BAMs in response to stress and at night, respectively. BAM9 has been reported to be transcriptionally induced by stress although the mechanism for BAM9 function is unclear. From yeast two‐hybrid experiments, we identified the plastid‐localized AMY3 as a potential interaction partner for BAM9. We found that BAM9 interacted with AMY3 in vitro and that BAM9 enhances AMY3 activity about three‐fold. Modeling of the AMY3‐BAM9 complex predicted a previously undescribed alpha–alpha hairpin in AMY3 that could serve as a potential interaction site. Additionally, AMY3 lacking the alpha–alpha hairpin is unaffected by BAM9. Structural analysis of AMY3 showed that it can form a homodimer in solution and that BAM9 appears to replace one of the AMY3 monomers to form a heterodimer. The presence of both BAM9 and AMY3 in many vascular plant lineages, along with model‐based evidence that they heterodimerize, suggests that the interaction is conserved. Collectively these data suggest that BAM9 is a pseudoamylase that activates AMY3 in response to cellular stress, possibly facilitating stress recovery.

Biochemistry & Molecular Biology↗
DOE OSTI2021

Uplift and Seismicity Driven by Magmatic Inflation at Sierra Negra Volcano, Galápagos Islands

Abstract Although episodes of surface uplift and elevated seismicity precede many volcanic eruptions, their temporal evolution is often complex, and apparently in contradiction to simple trends predicted by mechanical deformation models. Here, we use continuous global positioning system and seismic data recorded at Sierra Negra volcano, Galápagos Islands, to show how the edifice responded to stress changes driven by magma accumulation in a shallow sill. The rate of uplift varied during the 13 years and 6.5 m of inflation before the 2018 eruption. The number of earthquakes per unit of uplift increased exponentially with total uplift as the differential stress increased. Accordingly, the temporal seismicity rate varied in time as a function of both the total uplift and the uplift rate. The Gutenberg‐Richter b ‐value decreased as a function of total uplift. In the final six months before the eruption, a sequence of large ( M > 4) earthquakes regulated the state of stress on the fault, each being followed by 2–3 days of postseismic quiescence, and retarding the increase in seismicity rate. These earthquakes did not affect the overall uplift rate. Subsidence of 8.5 m accompanied the 2‐month eruption. On resumption of uplift, the number of earthquakes per unit of uplift was very low, and the b ‐value high, reflecting the relaxed stress state of the fault system. These observations show that crustal deformation becomes increasingly brittle at higher stress states, and supports theoretical models based on elastic‐brittle mechanics. They suggest that joint interpretation of deformation and seismicity is key for forecasting future eruptions in similar volcanic settings.

Bell, Andrew Forbes↗