Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS1995

The evolutionary thermal response of a white dwarf to compressional heating by periodic dwarf nova accretion events

The thermal response of the underlying white dwarf in a cataclysmic variable to the periodic deposition of mass by a dwarf nova accretion event is simulated with a quasi-static stellar evolution code incorporating time variable accretion. After accretion at rates typical of dwarf nova outbursts (approx. 10(exp -7) to 10(exp -8)/yr) for outburst durations of days to 2 weeks, the radial infall is shut off and the evolution of the white dwarf is followed during dwarf nova quiescence. The matter is assumed to accrete softly with the same entropy as the white dwarf outer layers. In some sequences accretion is resumed and shut off repeatedly at intervals of months to simulate the thermal evolution of the white dwarf in typical dwarf novae such as SS Cygni and U Geminorum, between successive dwarf nova outbursts. Thermal timescales for white dwarf cooling following a given dwarf nova outburst depend upon the accretion rate, outburst duration, and white dwarf mass; they are nominally in the range 0.2-0.8 years for parameters typical of dwarf novae (white dwarf masses in the range 1.2-0.6 solar mass, outburst accretion rates in the range 1 x 10(exp -7)-10(exp -8) solar mass/yr, outburst durations in the range 7-14, days and quiescent intervals of 30-300 days). If the e-folding timescale of the white dwarf cooling is shorter than the quiescent interval bewteen outbursts, then the effect of compressional heating is too small to be observationally detectable.

Sion, Edward M.↗
NASA NTRS1994

Detection of X-ray emission from the PSR 1259-63/SS 2883 binary system

Nonpulsed but variable X-ray emission has been detected from the binary system containing the radio pulsar PSR 1259-63 during two pointed ROSAT observations, taken 5 months apart. This 47.7 ms radio pulsar is in a highly eccentric (epsilon approximately 0.85) binary system with the 10-15 solar mass Be star SS 2883. It is the first radio pulsar found to be in a binary system with a massive main-sequence companion; it is also the most highly eccentric binary system known to contain a neutron star. The level of X-ray flux detected in the ROSAT observations has increased with orbital phase by a factor of at least 10 between 1992 February and 1993 February. The X-ray flux is significantly greater than expected from the Be star's corona and seems likely to originate either from low-level stellar wind accretion onto the neutron star or from the shock between the stellar wind and the relativistic pulsar wind. The system may be the progenitor of the more slowly rotating Be X-ray binary pulsar systems.

Cominsky, Lynn↗
NASA NTRS1995

Optical and infrared observations of SGR 1806-20

The soft gamma-ray repeater (SGR) 1806-20 is associated with the center-brightened nonthermal nebula G10.0-0.3, thought to be a plerion. As in other plerions, a steady X-ray source, AX 1805.7-2025, has been detected coincident with the peak of the nebular radio emission. Vasisht et al. have shown that the radio peak has a core-jet appearance and argue that the core marks the true position of the SGR. At optical wavelengths, we detect three objects in the vicinity of the radio core. Only for the star closest to the core, barely visible in the optical but bright in the infrared (K-8.4 mag), the reddening is consistent with the high extinction (A(sub V) is approximately equal to 30 mag) that has been inferred for AX 1805.7 - 2025. From the absence of CO band absorption, we infer that the spectral type of this star is earlier than late-G/early-K. The large extinction probably arises in a molecular cloud located at a distance of 6 kpc, which means that the star, just like AX 1805.7-2025, is in or behind this cloud. This implies that the star is a supergiant. Since supergiants are rare, a chance coincidence with the compact radio core is very unlikely. To our knowledge, there are only three other examples of luminous stars embedded in nonthermal radio nebulae: SS 433, Cir X-1, and G70.7+1.2. Given this and the low coincidence probability, we suggest that the bright star is physically associated with SGR 1806-20, making it the first stellar indentification of a high-energy transient.

Kulkarni, S. R.↗
NASA NTRS1994

Global circulation, thermal structure, and carbon monoxide distribution in Venus' mesosphere in 1991

Millimeter-wave observations of CO lines have provided a detailed picture of Venus' mesosphere dynamics in 1991 from simultaneous measurements of absolute wind velocities in two layers and of temperature and CO horizontal and vertical profiles at 75-115 km. Venus' circulation at 90-110 km was characterized in 1991 by the superposition of a zonal retrograde flow and a subsolar-to-antisolar flow of approximately equal velocities, increasing from about 40 +/- 15 m/sec at 95 km to 90 +/- 15 m/sec at 105 km altitude. The magnitude of the increase of the SS-AS flow is consistent with Venus thermosphere general circulation models (VTGCM). At 105 km, the data further indicate a cos(latitude) dependence of the zonal flow and marginally suggest the presence of a poleward meridional component of 35 +/- 30 m/sec. No obvious day-to-day variations of the circulation are evident in the data at the 20 m/sec level. Thermal profiles in the low-latitude region appear to be consistent with the Pioneer Venus nightside profile, except above 110 km, where they are somewhat colder. High-latitude warming is still found, but mid-latitudes appear to be colder than the equator. The atmosphere appears to be in cyclostrophic balance up to about 105 km. The horizontal distribution of CO on Venus' nightside is essentially uniform, both in latitude and in local time. This behavior agrees with VTGCM simulations in which the zonal flow velocity is prescribed to match the observations. Comparison with previous wind measurements indicates that the zonal flow experiences dramatic long-term variations. This variability, along with short-term fluctuations of the mesospheric zonal flow (evidenced by the variability in the O2 nightglow emissions), apparently controls the CO and O2 nightglow distributions. Gravity wave activity is a plausible mechanism that can drive these variations.

Lellouch, Emmanuel↗
NASA NTRS1994

Dual use display systems for telerobotics

This paper describes a telerobotics display system, the Multi-mode Manipulator Display System (MMDS), that has applications for a variety of remotely controlled tasks. Designed primarily to assist astronauts with the control of space robotics systems, the MMDS has applications for ground control of space robotics as well as for toxic waste cleanup, undersea, remotely operated vehicles, and other environments which require remote operations. The MMDS has three modes: (1) Manipulator Position Display (MPD) mode, (2) Joint Angle Display (JAD) mode, and (3) Sensory Substitution (SS) mode. These three modes are discussed in the paper.

Massimino, Michael J.↗
NASA NTRS1996

Design and Development of a Baseband Processor for the Advanced Communications Technology Satellite

This paper describes the implementation of the operational baseband processor (BBP) subsystem on board the NASA Advanced Communications Technology Satellite (ACTS). The BBP supports the network consisting of the NASA ground station (NGS) low burst rate (LBR) terminals, and the T1 very small aperture terminals (VSAT's), to provide flexible, demand assigned satellite switched (SS), baseband processed frequency division modulated (FDM)/time division multiple access (TDMA) operations. This paper presents an overview of the baseband processor and includes a description of the data flow, functional block diagrams, and a discussion of the implementation of BBP. A discussion of the supporting technologies for the BBP is presented. A brief summary of BBP-level performance testing is also presented. Finally, a discussion of the implications of current technology on the BBP design, if it were to be developed today, is presented.

Lee, Kerry D.↗
NASA NTRS1997

T Pyxidis: The First Cataclysmic Variable with a Collimated Jet

We present the first observational evidence for a collimated jet in a cataclysmic variable system; the recurrent nova T Pyxidis. Optical spectra show bipolar components of H(alpha) with velocities approx. 1400 km/s, very similar to those observed in the supersoft X-ray sources and in SS 433. We argue that a key ingredient of the formation of jets in the supersoft X-ray sources and T Pyx (in addition to an accretion disk threaded by a vertical magnetic field), is the presence of nuclear burning on the surface of the white dwarf.

Shahbaz, T.↗
NASA NTRS1997

Evaluation of Heat Transfer and Thermal Stability of Supercritical JP-7 Fuel

A series of electrically heated tube experiments was conducted to investigate the potential of JP-7 as a coolant under conditions relevant to a Mach 8 propulsion system. The heat transfer capabilities, carbon deposition, and material compatibility of JP-7 at surface temperatures up to 1700 F (927 C) were tested in 0.125 in. diameter tubes of 304 SS, Inconel 617, Haynes 188, Haynes 230, and 50150 Moly-Rhenium. The heat transfer to the coolant was modeled well by a Dittus-Boelter correlation at lower heat fluxes. At higher heat fluxes, audible instabilities were observed and corresponded to a significant enhancement in the coolant heat transfer. The carbon deposition rates in these tests were comparable to those in previous experiments at lower heat fluxes and much longer residence times. This result suggests that alternative paths of the deposition mechanism may be enhanced under high heat flux test conditions. Microscopic investigation of the post test tubes indicated that there was a significant layer of ordered carbon deposits that had not been seen in the tests at lower heat flux.

Linne, Diane L.↗
NASA NTRS1993

Preliminary Stratigraphic Basis for Geologic Mapping of Venus

The age relations between geologic formations have been studied at 36 1000x1000 km areas centered at the dark paraboloid craters. The geologic setting in all these sites could be characterized using only 16 types of features and terrains (units). These units form a basic stratigraphic sequence (from older to younger: (1) Tessera (Tt); (2-3) Densely fractured terrains associated with coronae (COdf) and in the form of remnants among plains (Pdf); (4) Fractured and ridged plains (Pfr); (5) Plains with wrinkle ridges (Pwr); (6-7) Smooth and lobate plains (Ps/Pl); and (8) Rift-associated fractures (Fra). The stratigraphic position of the other units is determined by their relation with the units of the basic sequence: (9) Ridge bells (RB), contemporary with Pfr; (10-11) Ridges of coronae and arachnoids annuli (COar/Aar), contemporary with wrinkle ridges of Pwr; (12) Fractures of coronae annuli (COaf) disrupt Pwr and Ps/Pl; (13) Fractures (F) disrupt Pwr or younger units; (14) Craters with associated dark paraboloids (Cdp), which are on top of all volcanic and tectonic units except the youngest episodes of rift-associated fracturing and volcanism; (15-16) Surficial streaks (Ss) and surficial patches (Sp) are approximately contemporary with Cdp. These units may be used as a tentative basis for the geologic mapping of Venus including VMAP. This mapping should test the stratigraphy and answer the question of whether this stratigraphic sequence corresponds to geologic events which were generally synchronous all around the planet or whether the sequence is simply a typical sequence of events which occurred in different places at diffferent times.

Basilevsky, A. T.↗
NASA NTRS1998

Autonomous Image Processing Algorithms Locate Region-of-Interests: The Mars Rover Application

In this report, we demonstrate that bottom-up IPA's, image-processing algorithms, can perform a new visual task to select and locate Regions-Of-Interests (ROIs). This task has been defined on the basis of a theory of top-down human vision, the scanpath theory. Further, using measures, Sp and Ss, the similarity of location and ordering, respectively, developed over the years in studying human perception and the active looking role of eye movements, we could quantify the efficient and efficacious manner that IPAs can imitate human vision in located ROIS. The means to quantitatively evaluate IPA performance has been an important part of our study. In fact, these measures were essential in choosing from the initial wide variety of IPAS, that particular one that best serves for a type of picture and for a required task. It should be emphasized that the selection of efficient IPAs has depended upon their correlation with actual human chosen ROIs for the same type of picture and for the same required task accomplishment.

Privitera, Claudio↗
NASA NTRS1998

Time-Resolved O3 Chemical Chain Reaction Kinetics Via High-Resolution IR Laser Absorption Methods

Excimer laser photolysis in combination with time-resolved IR laser absorption detection of OH radicals has been used to study O3/OH(v = 0)/HO2 chain reaction kinetics at 298 K, (i.e.,(k(sub 1) is OH + 03 yields H02 + 02 and (k(sub 2) is H02 + 03 yields OH + 202). From time-resolved detection of OH radicals with high-resolution near IR laser absorption methods, the chain induction kinetics have been measured at up to an order of magnitude higher ozone concentrations ([03] less than or equal to 10(exp 17) molecules/cu cm) than accessible in previous studies. This greater dynamic range permits the full evolution of the chain induction, propagation, and termination process to be temporally isolated and measured in real time. An exact solution for time-dependent OH evolution under pseudo- first-order chain reaction conditions is presented, which correctly predicts new kinetic signatures not included in previous OH + 03 kinetic analyses. Specifically, the solutions predict an initial exponential loss (chain "induction") of the OH radical to a steady-state level ([OH](sub ss)), with this fast initial decay determined by the sum of both chain rate constants, k(sub ind) = k(sub 1) + k(sub 2). By monitoring the chain induction feature, this sum of the rate constants is determined to be k(sub ind) = 8.4(8) x 10(exp -14) cu cm/molecule/s for room temperature reagents. This is significantly higher than the values currently recommended for use in atmospheric models, but in excellent agreement with previous results from Ravishankara et al.

Kulcke, Axel↗
NASA NTRS1998

Large Scale Testing of a Foam/Multilayer Insulation Thermal Control System (TCS) for Cryogenic Upper Stages

The development of high energy cryogenic upper stages is essential for the efficient delivery of large payloads to various destinations envisioned in future programs. A key element in such upper stages is cryogenic fluid management (CFM) advanced development/technology. Due to the cost of and limited opportunities for orbital experiments, ground testing must be employed to the fullest extent possible. Therefore, a system level test bed termed the Multipurpose Hydrogen Test Bed (MHTB), which is representative in size and shape (3 meter diameter by 3 meter long with a volume of 18 cubic meters) of a fully integrated space transportation vehicle liquid hydrogen propellant tank has been established. To date, upper stage studies have often baselined the foam/multilayer insulation (FMLI) combination concept; however, hardware experience with the concept is minimal and was therefore selected for the MHTB. The foam element (isofoam SS-1 171 with an average thickness of 3.5 centimeters) is designed to protect against ground hold/ascent flight environments, and allows for the use of a dry nitrogen purge as opposed to the more complex/heavy helium purge subsystem normally required with MLI in cryogenic applications. The MLI (45 layers of Double Aluminized Mylar with Dacron spacers) provides protection in the vacuum environment of space and is designed for an on-orbit storage period of 45 days. Several unique features were incorporated in the MLI concept and included: variable density MLI (reduces weight and radiation losses by changing the layer density), larger but fewer DAM perforations for venting during ascent to orbit (reduces radiation losses), and roll wrap installation of the MLI with a commercially established process to lower assembly man-hours and reduce seam heat leak. Thermal performance testing of the MHTB TCS was conducted during three test series conducted between September 1995 and May 1996. Results for the ground hold portion of the tests were as expected producing an average heat leak of 63 WattS/M2 at an average foam surface temperature of 170 K. The results of the simulated orbit hold test interval produced heat leaks ranging from 0.085 to 0.22 Watts/squareM at warm boundary temperatures of 164K and 305K, respectively. When compared to the performance for a traditional MLI system, a 60% reduction in orbital heat leak or boiloff was measured. Overall, the MHTB TCS demonstrated satisfactory performance for all mission phases required of a cryogenic upper stage.

Hastings, Leon↗
NASA NTRS1997

A Precessing Disk in OJ 287?

Sillanpaa et al. have demonstrated that the active galactic nucleus OJ 287 has intensity peaks that recur within a period of about 12 yr. I suggest that this is the result of the sweeping of a precessing relativistic beam across our line of sight. In analogy to Hercules X-1 and SS 433, precession is attributed to the torque exerted by a companion mass on an accretion disk. Secondary maxima observed 1.2 yr after two of these peaks may be evidence of nodding motion.

Katz, J. I.↗
NASA NTRS1999

Multi-Wavelength Superoutburst Observations of T Leonis

We present results of simultaneous superoutburst observations in the X-ray, Extreme Ultraviolet (EUV), optical, and IR bands of the tremendous outburst amplitude dwarf novae T Leonis. Near peak luminosity, a single blackbody represents a good fit to T Leo's observed continuum in the EUV spectral region, yielding a boundary layer temperature of 71,000 to 97,000K. Inclusion of the longer wavelength observations, UV to the IR, indicates that a blackbody fit is inappropriate. A single temperature fit to only the UV and red-ward data for T Leo works well, but yields a much lower temperature, near 28,000K. Using our own observations and previously obtained EUV, UV and optical (super)outburst observations for the dwarf novae U Gem and SS Cyg, the SU UMa star VW Hyi, and the TOADS, TV Crv, BC UMa, and SW UMa, we find that in all cases, high energy observations yield high temperature, small emitting regions, while fits to UV and red-ward data produce cooler temperatures from much larger emitting regions. These results are consistent with the idea that high energy data provide a direct measurement of the boundary layer while the lower energy data measure a much larger, multi-temperature region, likely to be dominated by the outburst heated inner accretion disk. High energy outburst observations show that the boundary layer temperature decreases with decreasing orbital period and UV outburst observations provide evidence for a missing or weak inner disk in the TOADs. We present a simple model of mass accretion onto the white dwarf during (super)outburst which can account for the observed correlation between temperature.

Howell, Steve B.↗
NASA NTRS1999

Cyclic Cryogenic Thermal-Mechanical Testing of an X-33/RLV Liquid Oxygen Tank Concept

An important step in developing a cost-effective, reusable, launch vehicle is the development of durable, lightweight, insulated, cryogenic propellant tanks. Current cryogenic tanks are expendable so most of the existing technology is not directly applicable to future launch vehicles. As part of the X-33/Reusable Launch Vehicle (RLV) Program, an experimental apparatus developed at the NASA Langley Research Center for evaluating the effects of combined, cyclic, thermal and mechanical loading on cryogenic tank concepts was used to evaluate cryogenic propellant tank concepts for Lockheed-Martin Michoud Space Systems. An aluminum-lithium (Al 2195) liquid oxygen tank concept, insulated with SS-1171 and PDL-1034 cryogenic insulation, is tested under simulated mission conditions, and the results of those tests are reported. The tests consists of twenty-five simulated Launch/Abort missions and twenty-five simulated flight missions with temperatures ranging from -320 F to 350 F and a maximum mechanical load of 71,300 lb. in tension.

Rivers, H. Kevin↗
NASA NTRS2000

ACTS Ka-Band Earth Stations: Technology, Performance, and Lessons Learned

The Advanced Communications Technology Satellite (ACTS) Project invested heavily in prototype Ka-band satellite ground terminals to conduct an experiments program with the ACTS satellite. The ACTS experiment's program proposed to validate Ka-band satellite and ground station technology. demonstrate future telecommunication services. demonstrate commercial viability and market acceptability of these new services, evaluate system networking and processing technology, and characterize Ka-band propagation effects, including development of techniques to mitigate signal fading. This paper will present a summary of the fixed ground terminals developed by the NASA Glenn Research Center and its industry partners, emphasizing the technology and performance of the terminals (Part 1) and the lessons learned throughout their six year operation including the inclined orbit phase of operations (Full Report). An overview of the Ka-band technology and components developed for the ACTS ground stations is presented. Next. the performance of the ground station technology and its evolution during the ACTS campaign are discussed to illustrate the technical tradeoffs made during the program and highlight technical advances by industry to support the ACTS experiments program and terminal operations. Finally. lessons learned during development and operation of the user terminals are discussed for consideration of commercial adoption into future Ka-band systems. The fixed ground stations used for experiments by government, academic, and commercial entities used reflector based offset-fed antenna systems ranging in size from 0.35m to 3.4m antenna diameter. Gateway earth stations included two systems, referred to as the NASA Ground Station (NGS) and the Link Evaluation Terminal (LET). The NGS provides tracking, telemetry, and control (TT&C) and Time Division Multiple Access (TDMA) network control functions. The LET supports technology verification and high data rate experiments. The ground stations successfully demonstrated many services and applications at Ka-band in three different modes of operation: circuit switched TDMA using the satellite on-board processor, satellite switched SS-TDMA applications using the on-board Microwave Switch Matrix (MSM), and conventional transponder (bent-pipe) operation. Data rates ranged from 4.8 kbps up to 622 Mbps. Experiments included: 1) low rate (4.8- 1 00's kbps) remote data acquisition and control using small earth stations, 2) moderate rate (1-45 Mbps) experiments included full duplex voice and video conferencing and both full duplex and asymmetric data rate protocol and network evaluation using mid-size ground stations, and 3) link characterization experiments and high data rate (155-622 Mbps) terrestrial and satellite interoperability application experiments conducted by a consortium of experimenters using the large transportable ground stations.

Reinhart, Richard C.↗
NASA NTRS2001

Large-Scale Liquid Hydrogen Testing of Variable Density Multilayer Insulation with a Foam Substrate

The multipurpose hydrogen test bed (MHTB), with an 18-cu m liquid hydrogen tank, was used to evaluate a combination foam/multilayer combination insulation (MLI) concept. The foam element (Isofoam SS-1171) insulates during ground hold/ascent flight, and allowed a dry nitrogen purge as opposed to the more complex/heavy helium purge subsystem normally required. The 45-layer MLI was designed for an on-orbit storage period of 45 days. Unique WI features include a variable layer density, larger but fewer double-aluminized Mylar perforations for ascent to orbit venting, and a commercially established roll-wrap installation process that reduced assembly man-hours and resulted in a roust, virtually seamless MLI. Insulation performance was measured during three test series. The spray-on foam insulation (SOFI) successfully prevented purge gas liquefaction within the MLI and resulted in the expected ground hold heat leak of 63 W/sq m. The orbit hold tests resulted in heat leaks of 0.085 and 0.22 W/sq m with warm boundary temperatures of 164 and 305 K, respectively. Compared to the best previously measured performance with a traditional MLI system, a 41-percent heat leak reduction with 25 fewer MLI layers was achieved. The MHTB MLI heat leak is half that calculated for a constant layer density MLI.

Martin, J. J.↗
NASA NTRS2001

Adaptive Instrument Module: Space Instrument Controller "Brain" through Programmable Logic Devices

The Adaptive Instrument Module (AIM) will be the first true demonstration of reconfigurable computing with field-programmable gate arrays (FPGAs) in space, enabling the 'brain' of the system to evolve or adapt to changing requirements. In partnership with NASA Goddard Space Flight Center and the Australian Cooperative Research Centre for Satellite Systems (CRC-SS), APL has built the flight version to be flown on the Australian university-class satellite FEDSAT. The AIM provides satellites the flexibility to adapt to changing mission requirements by reconfiguring standardized processing hardware rather than incurring the large costs associated with new builds. This ability to reconfigure the processing in response to changing mission needs leads to true evolveable computing, wherein the instrument 'brain' can learn from new science data in order to perform state-of-the-art data processing. The development of the AIM is significant in its enormous potential to reduce total life-cycle costs for future space exploration missions. The advent of RAM-based FPGAs whose configuration can be changed at any time has enabled the development of the AIM for processing tasks that could not be performed in software. The use of the AIM enables reconfiguration of the FPGA circuitry while the spacecraft is in flight, with many accompanying advantages. The AIM demonstrates the practicalities of using reconfigurable computing hardware devices by conducting a series of designed experiments. These include the demonstration of implementing data compression, data filtering, and communication message processing and inter-experiment data computation. The second generation is the Adaptive Processing Template (ADAPT) which is further described in this paper. The next step forward is to make the hardware itself adaptable and the ADAPT pursues this challenge by developing a reconfigurable module that will be capable of functioning efficiently in various applications. ADAPT will take advantage of radiation tolerant RAM-based field programmable gate array (FPGA) technology to develop a reconfigurable processor that combines the flexibility of a general purpose processor running software with the performance of application specific processing hardware for a variety of high performance computing applications.

Darrin, Ann Garrison↗