Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SPIN ORIENTATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS2004

Improved Nutation Damper for a Spin-Stabilized Spacecraft

A document proposes an improved liquid- ring nutation damper for a spin-stabilized spacecraft. The improvement addresses the problem of accommodating thermal expansion of the damping liquid. Heretofore, the problem has been solved by either (1) filling the ring completely with liquid and accommodating expansion by attaching a bellows or (2) partially filling the ring and accepting the formation of bubbles. The disadvantage of (1) is that a bellows is expensive and may not be reliable; the disadvantage of (2) is that bubbles can cause fluid lockup and consequent loss of damping. In the improved damper, the ring would be nearly completely filled with liquid, and expansion would be accommodated, but not by a bellows. Instead, an escape tube would be attached to the ring. The escape tube would be positioned and oriented so that the artificial gravitation and the associated buoyant force generated by the spin of the spacecraft would cause the bubbles to migrate toward the tip of the tube. In addition, when the spacecraft was on the launch pad, the escape tube would be at the top of the ring, so that bubbles would rise into the tube.

Woodard, Mark A.↗
DOE OSTI2020

X-ray detection of ultrashort spin current pulses in synthetic antiferromagnets

Here, we explore the ultrafast generation of spin currents in magnetic multilayer samples by applying fs laser pulses to one layer and measuring the magnetic response in the other layer by element-resolved x-ray spectroscopy. In Ni(5 nm)/Ru(2 nm)/Fe(4 nm), the Ni and Fe magnetization directions couple antiferromagnetically due to the Ruderman–Kittel–Kasuya–Yosida interaction but may be oriented parallel through an applied magnetic field. After exciting the top Ni layer with a fs laser pulse, we also find that the Fe layer underneath demagnetizes, with a 4.1±1.9% amplitude difference between parallel and antiparallel orientation of the Ni and Fe magnetizations. We attribute this difference to the influence of a spin current generated by the fs laser pulse that transfers angular momentum from the Ni into the Fe layer. Our results confirm that superdiffusive spin transport plays a role in determining the sub-ps demagnetization dynamics of synthetic antiferromagnetic layers, but also evidence large depolarization effects due to hot electron dynamics, which are independent of the relative alignment of the magnetization in Ni and Fe.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Topological antiferromagnetic semimetal for spintronics: A case study of a layered square-net system EuZnSb 2

Here, we use the first-principles and effective Hamiltonian methods to study the electronic structure and magnetic properties of a recently synthesized layered antiferromagnetic square-net topological semimetal EuZnSb2 [Phys. Rev. Res. 2, 033462 (2020)]. The main message of the paper is that effects of small changes in the band structure produced by the magnetic ordering and changes in the orientation of the Néel vector are amplified in such transport properties as the spin Hall conductivity. We predict that the effects of the broken symmetry introduced by the ordering of the Néel vector, being very weak in the bulk, are pronounced in the surface electronic dispersion, suggesting that surface probes may be more suited to measure them. The coexistence of the magnetism with many other competing phases make this material interesting and possibly useful for quantum spintronics applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS2012

Radiation Shielding System Using a Composite of Carbon Nanotubes Loaded with Electropolymers

Single-wall carbon nanotubes (SWCNTs) coated with a hydrogen-rich, electrically conducting polymer such as polyethylene, receive and dissipate a portion of incoming radiation pulse energy to electrical signals that are transmitted along the CNT axes, and are received at energy-dissipating terminals. In this innovation, an array of highly aligned nanowires is grown using a strong electric field or another suitable orientation procedure. Polyethylene (PE), polymethymlethacrylate (PMMA), or other electrically conducting polymer is spin-coated onto the SWCNTs with an average thickness of a few hundred nanometers to a few tenths of micrometers to form a PE/SWCNT composite. Alternatively, the polymer is spin-coated onto the nanowire array or an anodized alumina membrane (AAM) to form a PE/metal core shell structure, or PE can be electropolymerized using the SWCNTs or the metal nanowires as an electrode to form a PE/SWCNT core shell structure. The core shell structures can be extruded as anisotropic fibers. A monomer can be polymerized in the presence of SWCNTs to form highly cross-linked PE/SWCNT films. Alternatively, Pb colloid solution can be impregnated into a three-dimensional PE/SWCNT nanostructure to form a PW/SWCNT/Pb composite structure. A face-centered cubic (FCC) arrangement provides up to 12 interconnection channels connected to each core, with transverse channel dimensions up to 20 nm, with adequate mechanical compressive strength, and with an associated electrical conductivity of around 3 Seimens/cm for currents ranging from 0.01 to 10 mA. This threedimensional nanostructure is used as a host material to house appropriate radiation shielding material such as hydrogen- rich polymer/CNT structures, metal nanoparticles, and nanowires. Thicknesses of this material required to attenuate 10 percent, 50 percent, and 90 percent of an incident beam (gamma, X-ray, ultraviolet, neutron, proton, and electron) at energies in the range of 0 440 MeV are being determined, for example, by measuring fluence rate reduction. For example, a radiation field arrives first at an exposed surface of the innovation and produces an associated first electric field within the metal-like fingers of the three-dimensional nanostructure. This field is intensified near the exposed tips of the fingers, and this intensified field generates an intensified second electric field near the adjacent exposed tips of the coated CNSs. This generates an associated electrical current in the CNSs, and the associated electropolymer coating. The current is received by the second substrate transport component and is transported to the dissipation mechanism located contiguously to the second substrate.

McKay, Chris↗
NASA NTRS1990

Obliquity histories of Earth and Mars: Influence of inertial and dissipative core-mantle coupling

For both the Earth and Mars, secular variations in the angular separation of the spin axis from the orbit normal are suspected of driving major climatic changes. There is considerable interest in determining the amplitude and timing of these obliquity variations. If the orientation of the orbital plane were inertially fixed, and the planet were to act as a rigid body in it response to precessional torques, the spin axis would simply precess around the orbit at a fixed obliquity and at a uniform angular rate. The precession rate parameter depends on the principal moments of inertia and rotation rate of the perturbed body, and on the gravitational masses and semiminor axes of the perturbing bodies. For Mars, the precession rate is not well known, but probably lies in the interval 8 to 10 arcsec/year. Gravitational interactions between the planets lead to secular motions of the orbit planes. In the rigid body case, the spin axis still attempts to precess about the instantaneous orbit normal, but now the obliquity varies. The hydrostatic figure of a planet represents a compromise between gravitation, which attempts to attain spherical symmetry, and rotation, which prefers cylindrical symmetry. Due to their higher mean densities the cores of the Earth and Mars will be more nearly spherical than the outer layers of these planets. On short time scales it is appropriate to consider the core to be an inviscid fluid constrained to move with the ellipsoidal region bounded by the rigid mantle. The inertial coupling provided by this mechanism is effective whenever the ellipticicy of the container exceeds the ratio of precessional to rotational rates. If the mantle were actually rigid, this would be an extremely effective type of coupling. However, on sufficiently long time scales, the mantle will deform viscously and can accommodate the motions of the core fluid. A fundamentally different type of coupling is provided by electromagnetic or viscous torques. This type of coupling is likely to be most important on longer time scales. In each case, the mantle exerts an equal and opposite torque on the core.

Bills, Bruce G.↗
DOE OSTI2022

Twistronics of Janus transition metal dichalcogenide bilayers

Twisted multilayers of two-dimensional (2D) materials are an increasingly important platform for investigating quantum phases of matter, and in particular, strongly correlated electrons. The moiré pattern introduced by the relative twist between layers creates effective potentials of long wavelength, leading to electron localization. However, in contrast to the abundance of 2D materials, few twisted heterostructures have been studied until now. Here, in this study, we develop a first-principles continuum theory to study the electronic bands introduced by moire patterns of twisted Janus transition metal dichalcogenide (TMD) homo- and heterobilayers. The model includes lattice relaxation, stacking-dependent effective mass, and Rashba spin-orbit coupling. We then perform a high-throughput generation and characterization of DFT-extracted continuum models for more than a hundred possible combinations of materials and stackings. Our model predicts that the moiré physics and emergent symmetries depend on chemical composition, vertical layer orientation, and twist angle, so that the miniband wave functions can form triangular, honeycomb, and kagome networks. Rashba spin-orbit effects, peculiar of these systems, can dominate the moiré bandwidth at small angles. Our work enables detailed investigation of Janus twisted heterostructures, allowing the discovery and control of novel electronic phenomena.

36 MATERIALS SCIENCE↗
NASA NTRS1979

Some flight data extraction techniques used on a general aviation spin research aircraft

Some methods for obtaining flight data from a highly instrumented general aviation spin research aircraft are developed and illustrated. The required correction terms for the measurement of body accelerations, body velocities, and aircraft orientation are presented. In addition, the equations of motion are utilized to derive total aerodynamic coefficients for comparison with model tests and for analysis. Flight test experience is used to evaluate the utility of various instruments and calculation techniques for spin research.

Sliwa, S. M.↗
DOE OSTI2022

Spin-phonon resonances in nearly polar metals with spin-orbit coupling

In metals in the vicinity of a polar transition, interactions between electrons and soft phonon modes remain to be determined. Here we explore the consequences of spin-orbit assisted electron-phonon coupling on the collective modes of such nearly polar metals in the presence of magnetic field. We find that the soft polar phonon hybridizes with spin-flip electronic excitations of the Zeeman-split bands leading to an anticrossing. The associated energy splitting allows for an unambiguous determination of the strength of the spin-orbit mediated coupling to soft modes in polar metals by spectroscopic experiments. Here, the approach to the polar transition is reflected by the softening of the effective g factor of the hybridized spin-flip mode. Analyzing the static limit, we find that the polar order parameter can be oriented by magnetic field. This provides possibilities for alternative switching protocols in polar metallic materials. We demonstrate that the effects we predict can be observed with current experimental techniques and discuss promising material candidates.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS2003

A Macroscopic Realization of the Weak Interaction

A.J.Leggett suggested in 1977 that a permanent electric dipole moment due to the parity-nonconserving electron-nucleon interaction, even though it is extremely small, could be measured in the superfluid He-3 B because the moment should be proportional to the size of the sample in this system. If this moment is observed, it will be the first example of a macroscopic realization of the weak interaction. In our planned experiments, a high electric field of up to 6 kV/cm is applied between two parallel electrodes in the He-3 sample. We expect to observe the NMR frequency of the lowest-lying spin-wave mode trapped by the liquid crystal-like texture of the B phase rotation axis in our geometry. The interaction of the electric field and the macroscopic permanent electric dipole moment, which is oriented along the rotation axis, will cause a small change in the texture and hence a small increase in the frequency of the spin wave mode. Besides the basic ideas, we present the purpose and the design of our first cell that is under construction.

Nishimori, Arito↗
DOE OSTI2021

Facile Measurement of the Rotation of a Single Optically Trapped Nanoparticle Using the Diagonal Ratio of a Quadrant Photodiode

Optical tweezers are a powerful tool for exploring physical properties of particles in various environments through analysis of their dynamics in a trapping potential. Analysis of the trapped particle's position is often done using interferometric back-focal-plane detection microscopy in which interference between the trapping laser and the light interacting with the trapped particle is projected on a quadrant photo-diode (QPD). The QPD measurements are almost universally the voltage ratios between the transverse components of the detector (left/right; up/down) that are calibrated to ascertain particle positions and orientations (i.e., rotation). In this paper, we demonstrate how measuring the diagonal ratio of the QPD allows tracking the spinning and orbital motion of optically trapped objects with enhanced sensitivity compared to the conventional transverse ratio and reveals additional information about particle dynamics. The diagonal ratio "balances" the signal from opposite sides of the QPD, allowing common mode noise reduction and increased measurement sensitivity of the rotating nanospheres at frequencies from below 200 Hz to above 15 kHz. We show that the variability in particle rotation rates is due to slight differences in the aspect ratio of the nanoparticles. We also measure in situ a gradual acceleration in the spinning frequency of trapped nanoparticles due to photothermal shedding of surface ligands and the resulting decrease of rotational friction in solution. The accelerating particles spin at rates exceeding 30 kHz and are eventually "optically printed" onto the glass coverslip on top of the liquid cell enclosure. The diagonal ratio is a simple, readily available, and powerful enabler for measuring rotational dynamics with a 5-fold sensitivity increase over conventional QPD measurements. This affords opportunities for controlling the orientational dynamics of trapped nanoparticles, which is crucial for various applications, including nanoscale mechanical motors.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Insulator‐to‐Metal Transition and Isotropic Gigantic Magnetoresistance in Layered Magnetic Semiconductors

Magnetotransport, the response of electrical conduction to external magnetic field, acts as an important tool to reveal fundamental concepts behind exotic phenomena and plays a key role in enabling spintronic applications. Magnetotransport is generally sensitive to magnetic field orientations. In contrast, efficient and isotropic modulation of electronic transport, which is useful in technology applications such as omnidirectional sensing, is rarely seen, especially for pristine crystals. Here a strategy is proposed to realize extremely strong modulation of electron conduction by magnetic field which is independent of field direction. GdPS, a layered antiferromagnetic semiconductor with resistivity anisotropies, supports a field-driven insulator-to-metal transition with a paradoxically isotropic gigantic negative magnetoresistance insensitive to magnetic field orientations. This isotropic magnetoresistance originates from the combined effects of a near-zero spin–orbit coupling of Gd 3+ -based half-filling ƒ-electron system and the strong on-site f – d exchange coupling in Gd atoms. These results not only provide a novel material system with extraordinary magnetotransport that offers a missing block for antiferromagnet-based ultrafast and efficient spintronic devices, but also demonstrate the key ingredients for designing magnetic materials with desired transport properties for advanced functionalities.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Solid–liquid transition in a skyrmion matter

We report Monte-Carlo studies of the orientational order and melting of a 2D skyrmion lattice containing more than one million spins. Two models have been investigated, a microscopic model of lattice spins with Dzyaloshinskii–Moryia interaction that possesses skyrmions, and the model in which skyrmions are treated as point particles with repulsive interaction derived from a spin model. They produce similar results. The skyrmion lattice exhibits a sharp one-step transition between solid and liquid phases on temperature and the magnetic field. This solid–liquid transition is characterized by the kink in the magnetization. Here, the field-temperature phase diagram is computed. We show that the application of the field gradient to a 2D system of skyrmions produces a solid–liquid interface that must be possible to observe in experiments.

2D melting↗
NASA NTRS1976

Pulsar average wave forms and hollow-cone beam models

Pulsar wave forms have been analyzed from observations conducted over a wide radio-frequency range to assess the wave-form morphologies and to measure wave-form widths. The results of the analysis compare favorably with the predictions of a model with a hollow-cone beam of fixed dimensions and with random orientation of both the observer and the cone axis with respect to the pulsar spin axis. A class of three-component wave forms is included in the model by adding a central pencil beam to the hollow-cone hypothesis. The consequences of a number of discrepancies between observations and quantitative predictions of the model are discussed.

Backer, D. C.↗
NASA NTRS1981

Spin-controlled maneuver strategies using unbalanced precessions

The use of unbalanced precessions as a trajectory control technique is combined with the spin-rate control of a spin-stabilized spacecraft to minimize the amount of fuel needed to implement an overall translation maneuver Delta V. It is shown that in many cases, it is more fuel efficient to spin down the spacecraft before reorienting its spin axis in the direction of the continuous or pulsed maneuver velocity change; the additional cost of the spin variation is compensated by the reduced amount of propellant needed to reorient its spin axis by way of unbalanced precessions to and from the maneuver Delta V orientation.

Kechichian, J. A.↗
NASA NTRS1988

Material growth and characterization for solid state devices

During the period of this research grant, the process of liquid phase electroepitaxy (LPEE) was used to grow ternary and quaternary alloy III-V semiconductor thin films. Selective area growth of InGaAs was performed on InP substrates using a patterned sputtered quartz or spin-on glass layer. The etch back and growth characteristics with respect to substrate orientation were investigated. The etch back behavior is somewhat different from wet chemical etching with respect to the sidewall profiles which are observed. LPEE was also employed to grow epitaxial layers of InGaAsP alloys on InP substrates. The behavior of Mn as an acceptor dopant was investigated with low temperature Hall coefficient and photoluminescence measurements. A metal-organic vapor phase epitaxy system was partially complete within the grant period. This atmospheric pressure system will be used to deposit III-V compound and alloy semiconductor layers in future research efforts.

Collis, Ward J.↗
DOE OSTI2020

Crystal orientation dependence of interfacial magnetic anisotropy at heavy-metal/magnetic-garnet interfaces

Ferrimagnetic insulators capped with a heavy metal are becoming an increasingly interesting materials system in spintronics due to their unique ability for electrical manipulation and detection of magnetic states and spin textures via spin-orbit torques. The ability to engineer magnetic anisotropy is a powerful tool for tuning the recently discovered phenomena in these bilayers such as electrical switching or the stabilization of topological magnetic textures. Here, we observe large shifts in the magnetic anisotropy in Tm 3 Fe 5 O 13 and Y 3 Fe 5 O 12 thin films due to heavy-metal capping layers, which strongly depends on the orientation of the substrate and therefore the orientation of the epitaxial films. This work suggests large Rashba spin-orbit coupling at the metal/ferrimagneticinsulator interface, which can be engineered in spintronic devices that utilize spin-orbit torques for electrical control of the magnetization in magnetic insulators.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS1995

Venus' Free Obliquity

The predicted orientation of Venus' rotation axis relative to its orbit ran be uniquely determined given knowledge of its J2 gravity coefficient and polar moment of inertia C if its free obliquity is fully damped. This assumption seems warranted given the dominant damping mechanism: turbulent fluid friction at a core mantle boundary (CMB). This skin friction results from differential obliquity of mantle and core spin axes, and the associated damping rate could be as short as 1/10(exp 6) year. However, the observed pole orientation indicates a free obliquity amplitude epsilon approx. = 2.1 deg compared with a nominal forced amplitude of 0.5 deg. There are two plausible explanations. The most likely is that the observed obliquity is a tidally evolved end state in which core friction, modulated by CMB ellipticity and core obliquity amplitude, counterbalances solid and atmospheric tidal torques. This concept is similar to the explanation for the retrograde spin omega as an end state in which solid and atmospheric thermal tidal torques balance at the present spin rate because of the omega(sup -1) dependence of the axial thermal torque. Weaker effects such as solid and thermal tides can then compete with core friction and for plausible models, their sum tends to increase free obliquity. The obliquity balance is controlled by the nonlinear (and nearly quadratic) dependence of the CMB turbulent "skin friction" torque on obliquity.Core ellipticity also has a profound effect on tidal evolution of Venus obliquity.

Yoder, Charles F.↗
DOE OSTI2025

Searching for Phase Transitions in Artificial Kagome Spin Ice

Artificial Kagome spin ice is a metasurface consisting of small islands of polarizable magnets. These islands can be oriented by an external magnetic field applied in the same plane as the metasurface. By subsequently applying a relatively weaker field in the opposite direction of the initial field, a portion of the magnets in the lattice can be repolarized or “flipped” the other way. These flips cause instabilities in a previously uniformly aligned lattice, causing the system to interact with itself and induce changes in the overall magnetization of the metasurface. This Summer, my goal was to use this phenomenon to discern whether or not these systems could undergo a phase transition caused only by the initial change of the external magnetic field. Based on previous datasets that indicated that such a transition was observable, my task was to find and reproduce this potential phenomena. This process was conducted by repeating measurements on the system by using an external magnet to align the spin ice and then using Magnetic Force Microscopy (MFM) to probe the surface of the material to understand the changes in the magnetization over time. This report will discuss the characteristics of artificial Kagome spin ice, the methodology used to induce phase transitions, and the image processing methods used to understand the results. Although no reproducible evidence of a phase transition was found during the Summer, we were able to successfully reproduce short-term responses in the spin ice, as well as plot a hysteresis curve of the material.

77 NANOSCIENCE AND NANOTECHNOLOGY↗