Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “S STATES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

A weighted state redistribution algorithm for embedded boundary grids

State redistribution is an algorithm that stabilizes cut cells for embedded boundary grid methods. This work extends the earlier algorithm in several important ways. First, state redistribution is extended to three spatial dimensions. Second, we discuss several algorithmic changes and improvements motivated by the more complicated cut cell geometries that can occur in higher dimensions. In particular, we introduce a weighted version with less dissipation in an easily generalizable framework. Third, we demonstrate that state redistribution can also stabilize a solution update that includes both advective and diffusive contributions. Notably, the stabilization algorithm is shown to be effective for incompressible as well as compressible reacting flows. Finally, we discuss the implementation of the algorithm for several exascale-ready simulation codes based on AMReX, demonstrating ease of use in combination with domain decomposition, hybrid parallelism and complex physics.

97 MATHEMATICS AND COMPUTING↗

Synthetic routes to a nanoscale inorganic cluster [Ga{sub 13}(μ{sub 3}-OH){sub 6}(μ{sub 2}-OH){sub 18}(H{sub 2}O)](NO{sub 3}){sub 15} evaluated by solid-state {sup 71}Ga NMR

Solid-state {sup 71}Ga NMR was used to characterize a series of [Ga{sub 13}(μ{sub 3}-OH){sub 6}(μ{sub 2}-OH){sub 18}(H{sub 2}O)](NO{sub 3}){sub 15} “Ga{sub 13}” molecular clusters synthesized by multiple methods. These molecular clusters are precursors to thin film electronics and may be employed in energy applications. The synthetic routes provide varying levels of impurities in the solid phase, and these impurities often elude traditional characterization techniques such as powder X-ray diffraction and Raman spectroscopy. Solid-state NMR can provide a window into the gallium species even in amorphous phases. This information is vital in order to prevent the impurities from causing defect sites in the corresponding thin films upon gelation and condensation (polymerization) of the Ga{sub 13} clusters. This work demonstrates the resolving power of solid-state NMR to evaluate structure and synthetic quality in the solid state, and the application of high-field NMR to study quadrupolar species, such as {sup 71}Ga. - Graphical abstract: The various synthetic routes and {sup 71}Ga solid-state NMR spectra of the nanoscale inorganic cluster [Ga{sub 13}(μ{sub 3}-OH){sub 6}(μ{sub 2}-OH){sub 18}(H{sub 2}O)](NO{sub 3}){sub 15}. - Highlights: • Solid-state {sup 71}Ga NMR of hydroxo-aquo metal clusters and the impurities present. • High-field NMR capability allows for quadrupolar species, such as {sup 71}Ga, to be routinely studied. • Efficient and environmentally friendly synthetic routes have been developed to prepare hydroxo-aquo metal clusters.

36 MATERIALS SCIENCE↗

In Situ Strain Tuning of the Dirac Surface States in Bi 2 Se 3 Films

Elastic strain has the potential for a controlled manipulation of the band gap and spin-polarized Dirac states of topological materials, which can lead to pseudomagnetic field effects, helical flat bands, and topological phase transitions. However, practical realization of these exotic phenomena is challenging and yet to be achieved. Here we show that the Dirac surface states of the topological insulator Bi 2 Se 3 can be reversibly tuned by an externally applied elastic strain. Performing in situ X-ray diffraction and in situ angle-resolved photoemission spectroscopy measurements during tensile testing of epitaxial Bi 2 Se 3 films bonded onto a flexible substrate, we demonstrate elastic strains of up to 2.1% and quantify the resulting changes in the topological surface state. Our study establishes the functional relationship between the lattice and electronic structures of Bi 2 Se 3 and, more generally, demonstrates a new route toward momentum-resolved mapping of strain-induced band structure changes.

Flötotto, David↗

Evolutions of non-steady-state magnetic reconnection

The full evolutions of collisionless non-steady-state magnetic reconnection are studied with full kinetic particle-in-cell simulations. There are different stages of reconnection: the onset or early growing stage when the out-of-plane electric field (E{sub y}) structure is a monopole at the X-point, the bipolar stage when the E{sub y} structure is bipolar and the outer electron diffusion region (EDR) is being elongated over time, and the possible final steady-state stage when E{sub y} is uniform in the reconnection plane. We find the change of reconnection rate is not empowered or dependent on the length of the EDR. During the early growing stage, the EDR is elongated while the reconnection rate is growing. During the later stage, the reconnection rate may significantly decrease but the length of the inner EDR is largely stable. The results indicate that reconnection is not controlled by the downstream physics, but rather by the availability of plasma inflows from upstream. The physical mechanism of the EDR elongation is studied. The Hall current induced by the quadrupole magnetic field (B{sub y}) is discovered to play an important role in this process. The condition of forming an extended electron super-Alfvenic outflow jet structure in nature is discussed. The jet structure could be elongated during the bipolar stage, and remains stable during steady state. The sufficiency of the electron inflow is crucial for the elongation. Open boundary conditions are applied in the outflow direction.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Calculation of state-to-state cross sections for triatomic reaction by the multi-configuration time-dependent Hartree method

A framework for quantum state-to-state integral and differential cross sections of triatomic reactive scattering using the Multi-Configuration Time-Dependent Hartree (MCTDH) method is introduced, where a modified version of the Heidelberg MCTDH package is applied. Parity of the system is adopted using only non-negative helicity quantum numbers, which reduces the basis set size of the single particle functions in angular degree of freedom almost by half. The initial wave packet is constructed in the space-fixed frame, which can accurately account for the centrifugal potential. By using the reactant-coordinate-based method, the product state-resolved information can be accurately extracted. Test calculations are presented for the H + H{sub 2} reactive scattering. This work demonstrates the capability of the MCTDH method for extracting accurate state-to-state integral and differential cross sections. As an efficient scheme for high-dimensional problems, the MCTDH method may be promising for the study of product state-resolved cross sections for polyatomic reactive systems.

74 ATOMIC AND MOLECULAR PHYSICS↗

A complex guided spectral transform Lanczos method for studying quantum resonance states

A complex guided spectral transform Lanczos (cGSTL) algorithm is proposed to compute both bound and resonance states including energies, widths, and wavefunctions. The algorithm comprises of two layers of complex-symmetric Lanczos iterations. A short inner layer iteration produces a set of complex formally orthogonal Lanczos polynomials. They are used to span the guided spectral transform function determined by a retarded Green operator. An outer layer iteration is then carried out with the transform function to compute the eigen-pairs of the system. The guided spectral transform function is designed to have the same wavefunctions as the eigenstates of the original Hamiltonian in the spectral range of interest. Therefore, the energies and/or widths of bound or resonance states can be easily computed with their wavefunctions or by using a root-searching method from the guided spectral transform surface. The new cGSTL algorithm is applied to bound and resonance states of HO{sub 2}, and compared to previous calculations.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

CHARGE STATE EVOLUTION IN THE SOLAR WIND. II. PLASMA CHARGE STATE COMPOSITION IN THE INNER CORONA AND ACCELERATING FAST SOLAR WIND

In the present work, we calculate the evolution of the charge state distribution within the fast solar wind. We use the temperature, density, and velocity profiles predicted by Cranmer et al. to calculate the ionization history of the most important heavy elements in the solar corona and solar wind: C, N, O, Ne, Mg, Si, S, and Fe. The evolution of each charge state is calculated from the source region in the lower chromosphere to the final freeze-in point. We show that the solar wind velocity causes the plasma to experience significant departures from equilibrium at very low heights, well inside the field of view (within 0.6 R{sub sun} from the solar limb) of nearly all the available remote-sensing instrumentation, significantly affecting observed spectral line intensities. We also study the evolution of charge state ratios with distance from the source region, and the temperature they indicate if ionization equilibrium is assumed. We find that virtually every charge state from every element freezes in at a different height, so that the definition of freeze-in height is ambiguous. We also find that calculated freeze-in temperatures indicated by charge state ratios from in situ measurements have little relation to the local coronal temperature of the wind source region, and stop evolving much earlier than their correspondent charge state ratio. We discuss the implication of our results on plasma diagnostics of coronal holes from spectroscopic measurements as well as on theoretical solar wind models relying on coronal temperatures.

79 ASTRONOMY AND ASTROPHYSICS↗

H{sub 2}(v = 0,1) + C{sup +}({sup 2} P) {yields} H+CH{sup +} STATE-TO-STATE RATE CONSTANTS FOR CHEMICAL PUMPING MODELS IN ASTROPHYSICAL MEDIA

State-to-state rate constants for the title reaction are calculated using the electronic ground state potential energy surface and an accurate quantum wave-packet method. The calculations are performed for H{sub 2} in different rovibrational states, v = 0, 1 and J = 0 and 1. The simulated reaction cross section for v = 0 shows a rather good agreement with the experimental results of Gerlich et al., both with a threshold of 0.36 eV and within the experimental error of 20%. The total reaction rate coefficients simulated for v = 1 are two times smaller than those estimated by Hierl et al. from cross sections measured at different temperatures and neglecting the contribution from v > 1 with an uncertainty factor of two. Thus, part of the disagreement is attributed to the contributions of v > 1. The computed state-to-state rate coefficients are used in our radiative transfer model code applied to the conditions of the Orion Bar photodissociation region, and leads to an increase of the line fluxes of high-J lines of CH{sup +}. This result partially explains the discrepancies previously found with measurements and demonstrates that CH{sup +} excitation is mostly driven by chemical pumping.

74 ATOMIC AND MOLECULAR PHYSICS↗

Ground-state structure of coherent lattice-mismatched zinc-blende A{sub 1-x}B{sub x}C semiconductor alloys (x=0.25 and 0.75)

Using valence force-field and first-principles total-energy calculations, we investigate the relative stability of possible ground-state structures, famatinite, Q8, and Q16, proposed in previous ground-state searches for coherent lattice-mismatched zinc-blende A{sub 1-x}B{sub x}C (x=0.25 and 0.75) semiconductor alloys. Our total-energy calculations show that among all the alloys, the Q8 or Q16 are the possible ground-state structures with the lowest total energies, whereas the famatinite structure is not. The observed trends are explained in terms of strain and the Coulomb energy contributions in these lattice-mismatched semiconductor alloys.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Noncollective aligned and antialigned states in {sup 125}I

High-spin states in {sup 125}I were populated using the reaction {sup 82}Se({sup 48}Ca,p4n) at a beam energy of 200 MeV and {gamma}-ray coincidence events were acquired with the Gammasphere spectrometer. The level scheme of {sup 125}I was extended considerably. In particular, maximally aligned states involving all eleven particles outside the {sup 114}Sn core were observed. Comparison with cranked Nilsson-Strutinsky calculations suggests that three of these states are the final I{sub max} states in terminating bands with all spin vectors aligned along a common axis. In two of these, one spin vector is antialigned and points in the opposite direction. In one of the states two spin vectors are antialigned. This is the first observation of a state with such a structure.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Ensemble Kalman Filter for Dynamic State Estimation of Power Grids Stochastically Driven by Time-correlated Mechanical Input Power

State and parameter estimation of power transmission networks is important for monitoring power grid operating conditions and analyzing transient stability. Wind power generation depends on fluctuating input power levels, which are correlated in time and contribute to uncertainty in turbine dynamical models. The ensemble Kalman filter (EnKF), a standard state estimation technique, uses a deterministic forecast and does not explicitly model time-correlated noise in parameters such as mechanical input power. However, this uncertainty affects the probability of fault-induced transient instability and increased prediction bias. Here a novel approach is to model input power noise with time-correlated stochastic fluctuations, and integrate them with the network dynamics during the forecast. While the EnKF has been used to calibrate constant parameters in turbine dynamical models, the calibration of a statistical model for a time-correlated parameter has not been investigated. In this study, twin experiments on a standard transmission network test case are used to validate our time-correlated noise model framework for state estimation of unsteady operating conditions and transient stability analysis, and a methodology is proposed for the inference of the mechanical input power time-correlation length parameter using time-series data from PMUs monitoring power dynamics at generator buses.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Temporal evolution of ion energy distribution functions and ion charge states of Cr and Cr-Al pulsed arc plasmas

To study the temporal evolution of ion energy distribution functions, charge-state-resolved ion energy distribution functions of pulsed arc plasmas from Cr and Cr-Al cathodes were recorded with high time resolution by using direct data acquisition from a combined energy and mass analyzer. The authors find increases in intensities of singly charged ions, which is evidence that charge exchange reactions took place in both Cr and Cr-Al systems. In Cr-Al plasmas, the distributions of high-charge-state ions exhibit high energy tails 50 μs after discharge ignition, but no such tails were observed at 500 μs. The energy ratios of ions of different charge states at the beginning of the pulse, when less neutral atoms were in the space in front of the cathode, suggest that ions are accelerated by an electric field. The situation is not so clear after 50 μs due to particle collisions. The initial mean ion charge state of Cr was about the same in Cr and in Cr-Al plasmas, but it decreased more rapidly in Cr-Al plasmas compared to the decay in Cr plasma. The faster decay of the mean ion charge state and ion energy caused by the addition of Al into a pure Cr cathode suggests that the mean ion charge state is determined not only by ionization processes at the cathode spot but also by inelastic collision between different elements.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A METHODOLOGY TO SUPPORT THE DEVELOPMENT OF A NEW STATE VISION FOR THE UNITED STATES NUCLEAR INDUSTRY

A new strategy in the way in which the United States nuclear power plants (NPPs) are operated, maintained, and supported is needed. One such strategy is to transform the NPP operating model through a business-driven approach that leverages technology to enable new capabilities that improve performance and reduce cost. This paper presents a methodology for developing an achievable yet transformative new state vision that ensures continued safe and efficient operations of the United States NPP fleet. This work builds on existing guidance and leverages previous research to comprehensively address both bottom-up (i.e., utility needs) and top-down (i.e., first principles) considerations important for developing a new state vision. The proposed methodology is intended to provide industry-wide guidance for developing a new state vision that leverages both the selected vendor’s capabilities in a way that meets the utility’s modernization goals while ensuring state-of-the-art systems engineering and human factors engineering principles are applied that promote overall plant safety, performance, and efficiency.

99 GENERAL AND MISCELLANEOUS↗

State of the States 2008: Renewable Energy Development and the Role of Policy

This report provides insights into the status of renewable energy development at the state level. Renewable resources are increasing in development overall, but state development varies by resource and rates of change. The factors contributing to renewable energy development at the state level are identified and discussed, including the challenges of understanding the role of different factors in development. The report also compiles and evaluates the status of 'best practice' state policy design and connects the existence of some policies with increased renewable energy development through correlation analysis. The report also proposes a strategy for better understanding the role of policy in renewable energy development, based on market-transformation principles. Correlation analysis illustrates the potential for further application of these principles to renewable energy. The final section provides resources for state policy makers for better understanding and developing renewable energy resources.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

U.S. Aerospace and Aviation Industry: A State-By-State Analysis

President George W. Bush and the Congress created the Commission on the Future of the United States Aerospace Industry to evaluate the current and future health of the industry as well as the challenges that lie ahead for the U.S. workforce and the economy. To accomplish our mission, we commissioned a study on the economic impact of the aerospace industry nationally and on a state-by-state basis, using the best available U.S. government data. This study sought to define the core of the aerospace industry. The resulting data represents that very core those jobs specifically tied to commercial and civilian aerospace. U.S. Aerospace and Aviation: A State-by-State Analysis examines the civilian and commercial aerospace and aviation industry by employment, wages, payroll, and establishments. The report found that the U.S. civilian and commercial aerospace and aviation industry employed over 2 million workers in 2001.

STATES (UNITED STATES)↗

Clean Air as a Bonus for Achieving Energy-Related State Goals: A Review of Policies and Programs in 15 States

This report explores connections between six common areas for state action on energy-related issues — resilience, economic development, energy affordability, electrifying transportation, grid modernization, and using local resources — and reducing air emissions. Although clean air often is not a driver for such state actions, they nonetheless reduce a variety of emissions, including particulates, nitrogen oxides, sulfur dioxide, and greenhouse gases like carbon dioxide. The study spans 15 geographically diverse states: Arizona, Delaware, Florida, Georgia, Indiana, Iowa, Kentucky, Louisiana, Missouri, Ohio, Pennsylvania, South Carolina, Tennessee, Texas and Utah. While these states have not adopted mandatory climate goals, they conduct a wide range of energy-related activities that reduce greenhouse gas emissions and other air pollutants as a side benefit.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗