Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Renewable Hydrogen”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
NASA NTRS2004

Modelling and Analysis of a Regenerative Fuel Cell Propulsion System for a High Altitude Long Endurance UAV

In the search to bridge current gaps in surveillance and communication technologies, a new type of, aircraft is currently undergoing design. The idea of a High Altitude Long Endurance (HALE) aircraft is already a few decades old, but has only recently become realizable. A relay and collector of information at altitudes of 65,000 feet and higher could greatly improve standards of data exchange, homeland security, and research of the air, land and sea. NASA, as a major force in propulsion research, is exploring methods of powering an autonomous aircraft for days, weeks, or even months without refueling. Such a task requires not only high energy density, but also the ability to make use of renewable energy sources to regenerate power. Hydrogen is one of the most energy dense fuels available. Fuel cells make use of hydrogen by harnessing the energy released as it combines with oxygen to produce electricity and water. Fuel cells are envisioned to occupy future propulsion systems in cooperation with solar cells where the photovoltaic arrays harness sunlight into power which can electrolize the water byproduct into reusable hydrogen and oxygen. Modeling this type of system requires adequate assumptions of support hardware and daily transients in operation. The performance of a regenerative fuel cell propulsion system lies in the flight characteristics (altitude, density, temperature, latitude, etc.). Each subsystem is defined by many parameters which can be varied across wide ranges. Statistical and probabilistic analyses bring forward a wealth of information that can be utilized in the design process. This is necessary since the required technologies are relatively young and barely, if yet, capable. Once the modeling is complete, a design space exploration of this highly constrained scenario can be utilized to find the optimal design. The model will become an interactive environment with which experiments and tests can be run. When linked

Simpson, Mike B.↗
DOE OSTI2023

Fuel cell and electrolyzer hotbox module using conductive zirconia stacks

Modular pressurized hotbox for use and substitution in a variety of pressurized electrochemical applications to include reversible solid oxide electrolyzer and fuel cells, energy storage systems, renewable fuel production, solid-state hydrogen pumping and liquefaction, and oxygen transport membranes. This is enabled by mixed electronic and ionic conducting compositions of vanadia-yttria and vanadia-calcia stabilized zirconia and a dry powder method of manufacture for ceramic core stacks.

McLarty, Dustin↗
DOE OSTI2020

Department of Energy Hydrogen Program Plan

The DOE Hydrogen Program Plan provides a strategic view of how the Department conducts and coordinates hydrogen research, development, and demonstration (RD&D) activities under the DOE Hydrogen Program. With participation from the Offices of Energy Efficiency and Renewable Energy, Fossil Energy, Nuclear Energy, Electricity, Science, and ARPA-E, the DOE Hydrogen Program is a coordinated Departmental effort to advance the affordable production, transport, storage, and use of carbon-neutral hydrogen across different sectors of the economy. This version of the Plan updates and expands upon previous versions, including the Hydrogen Posture Plan and the DOE Hydrogen and Fuel Cells Program Plan, and provides a coordinated high-level summary of hydrogen-related activities across DOE.

08 HYDROGEN↗
DOE OSTI2021

Life Cycle Analysis of Electrofuels: Fischer–Tropsch Fuel Production from Hydrogen and Corn Ethanol Byproduct CO 2

Electrofuels from renewable H 2 and waste CO 2 streams are of increasing interest because of their CO 2 emissions reduction potentials compared to fossil counterparts. This study evaluated the well-to-wheel (WTW) greenhouse gas (GHG) emissions of Fischer-Tropsch (FT) fuels from various electrolytic H 2 pathways and CO 2 sources, using various process designs (i.e., with and without H 2 recycle) and system boundaries. Two systems with different boundaries were considered: a stand-alone plant (with CO 2 from any source) and an integrated plant with corn ethanol production (supplying CO 2 ). The FT fuel synthesis process was modeled using Aspen Plus, which showed that 45% of the carbon in CO 2 can be fixed in the FT fuel, with a fuel production energy efficiency of 58%. Using nuclear or solar/wind electricity, the stand-alone FT fuel production from various plant designs can reduce WTW GHG emissions by 90-108%, relative to petroleum fuels. When integrating the FT fuel production process with corn ethanol production, the WTW GHG emissions of FT fuels are 57-65% lower compared to petroleum counterparts. This study highlights the sensitivity of the carbon intensity of FT fuels to the system boundary selection (i.e., stand-alone vs integrated), which has different implications under various GHG emission credit frameworks.

08 HYDROGEN↗
DOE OSTI2023

Integrated Modeling and Optimal Operation of Multi-Energy System for Coastal Community

Focusing on remote, isolated, and underserved communities, a multi-energy system is designed in this research which is capable of utilizing different energy sources in a more coordinated and energy-efficient way to support various demands, such as fresh water, electricity, hydrogen, thermal demand, etc. The energy sources considered are renewables (wind, solar, marine) and natural gas. The energy conversion process includes water desalination, gas combustion, water electrolyzation, and different types of storage (hydrogen tank, electricity, thermal, etc.) are designed to serve as buffers in supply-demand balancing. Sets of experiments are designed to demonstrate the effectiveness of the proposed operating model and investigate the impact of uncertainties from renewable generations and demands.

Chen, Yang↗
DOE OSTI2024

Integration of Concentrating Solar Power with High Temperature Electrolysis for Hydrogen Production: Preprint

Hydrogen (H2) has been identified as a leading sustainable contender to replace fossil fuels in transportation and electricity generation. H2 production can be achieved by concentrating solar thermal power (CSP) systems collecting thermal energy from the sun to various chemical processes for fuel production. Fuel production via solar thermal chemical processes integrated with CSP uses the full spectrum of sunlight compared with photovoltaic power conversion and stores solar energy directly and efficiently [1]. The solar fuel production can be realized by thermochemical processes (e.g., water splitting for H2 production, carbon dioxide reduction, or methane reforming) or thermal electrochemical methods (e.g., integration with solid oxide electrolysis cell). Technology development for CSP-integrated solar fuel production requires broad technological bases from solar energy collection to chemical energy conversion. H2 generated from renewable sources can be an energy carrier for a carbon-free economy. Integrating CSP with high temperature electrolysis (HTE) using solid oxide electrolysis cells (SOEC) provides a renewable path for H2 generation. The CSP-HTE integration approach provides the benefit of thermal energy storage (TES) for continuous operation, improved capacity, and SOEC life. H2 gas has low energy density for transportation, pipeline networks are expensive, and H2 liquefaction is energy intensive. However, an alternative method for H2 distribution is to use carbon dioxide (CO2) capture and liquid hydrocarbon synthesis to convert solar energy into liquid fuels that are compatible with the existing fossil fuel infrastructure.

concentrating solar thermal power↗
DOE OSTI2023

A New Class of Proton Conductors with Dramatically Enhanced Stability and High Conductivity for Reversible Solid Oxide Cells

Reversible solid oxide cells based on proton conductors (P-ReSOCs) have potential to be the most efficient and low-cost option for large-scale energy storage and power generation, holding promise as an enabler for the implementation of intermittent renewable energy technologies and the widespread utilization of hydrogen. Here, the rational design of a new class of hexavalent Mo/W-doped proton-conducting electrolytes with excellent durability while maintaining high conductivity is reported. Specifically, BaMo(W) 0.03 Ce 0.71 Yb 0.26 O 3-δ exhibits dramatically enhanced chemical stability against high concentrations of steam and carbon dioxide than the state-of-the-art electrolyte materials while retaining similar ionic conductivity. In addition, P-ReSOCs based on BaW 0.03 Ce 0.71 Yb 0.26 O 3-δ demonstrate high peak power densities of 1.54, 1.03, 0.72, and 0.48 W cm –2 at 650, 600, 550, and 500 °C, respectively, in the fuel cell mode. During steam electrolysis, a high current density of 2.28 A cm –2 is achieved at a cell voltage of 1.3 V at 600 °C, and the electrolysis cell can operate stably with no noticeable degradation when exposed to high humidity of 30% H 2 O at –0.5 A cm –2 and 600 °C for over 300 h. Altogether, this work demonstrates the promise of donor doping for obtaining proton conductors with both high conductivity and chemical stability for P-ReSOCs.

25 ENERGY STORAGE↗
DOE OSTI2025

Optimizing semi-hydrogenation of unsaturated hydrocarbons by electrolyte engineering approach

Electrochemical hydrogenation of unsaturated hydrocarbons, when powered by renewables, represents a unique opportunity to substitute current energy-intensive synthetic routes. Modulation of adsorption energies of the organic substrate and key intermediates of the reaction is critical for fine tuning of the yield, selectivity and kinetics of the reaction. Interestingly, mounting evidence exists regarding the role of electrolyte composition in the outcome of semi-hydrogenation reactions. Nevertheless, electrolyte optimization is a complex task, owing to its hybrid nature. Indeed, it is composed of water serving as a proton source, an organic solvent necessary to dissolve the organic substrate and a conducting salt. Herein, we demonstrate that varying conducting salt and organic solvent has a dramatic impact on the outcomes of semi-hydrogenation of alkynes. By varying salt and water concentrations, we demonstrate that water does not serve as a proton source, and instead addition of an acid is necessary. While increasing the acid concentration increases the yield of the reaction, at too large concentrations the hydrogen evolution reaction becomes predominant. Furthermore, by combining electrochemical measurements with spectroscopic techniques including Fourier transform infrared (FTIR) spectroscopy and small angle X-ray spectroscopy (SAXS), we demonstrate that the electrolyte solvation structure dramatically impacts the yield of the reaction. Organic solvents weakly interacting with water, including acetonitrile, form aqueous nanoheterogeneities that prevent the organic substrate from accessing the catalyst interface and thus lead to limited yields. Instead, solvents such as dimethylformamide form homogeneous mixtures with which all reactants can access the interface, leading to yields greater than 80% for optimized compositions.

Zhang, Rongyu↗
DOE OSTI2022

Hydrogen as Part of a 100% Clean Energy System: Exploring Its Decarbonization Roles

Today's energy system uses a variety of fuels and energy carriers in molecular forms, such as coal, oil, and natural gas, each contributing to CO2 emissions (Figure 1). As solar and wind levels grow and the energy system becomes more electrified, fossil molecular fuels will contribute a progressively smaller fraction of overall energy. As shown in Figure 2, hydroelectric storage and molecules, such as coal and natural gas, provide substantial storage and dispatch functionality today that will become increasingly critical for electricity operation and stability. Emerging low-carbon gases, such as hydrogen, can support the efficient integration of renewables in the transition from today's energy system to one that is 100% clean from a carbon emissions perspective.

clean energy system↗
DOE OSTI2025

Poly-Si Passivating Contacts Hydrogenation by Microwave Annealing

Hydrogenation is a crucial step in the fabrication of high-efficiency silicon solar cells. In this study, we demonstrate the for the first time effectiveness of hydrogen activation via microwave annealing of hydrogen-rich dielectrics coated on poly-Si passivating contacts. This method is compared with conventional hydrogenation techniques, such as annealing in N2 in the presence of a hydrogen-rich source (such as hydrogenated aluminum oxide (AlOx:H), hydrogenated silicon nitride (SiNy:H), or a AlOx:H/SiNy:H stack). Key improvements observed include a reduction in J0 from 30 to <5 fA/cm2, an increase in iVoc from 690 to >730 mV, and an enhancement in effective lifetime (teff) from 0.6 to ~3.5 milliseconds on phosphorus-doped poly-Si/SiO2 passivating contact samples. With a very short annealing time of ~1-2 minutes, the samples passivated by AlOx:H, SiNy:H, or the stack show similar performance to samples subjected to 30 minutes of nitrogen annealing. Photoluminescence (PL) spectra corroborate our findings regarding the hydrogenation of the poly-Si layer and the c-Si substrate, with an increase in PL intensity after microwave annealing. Ultimately, our work suggests that microwave annealing could be a promising addition, offering flexibility to traditional firing hydrogenation processes.

14 SOLAR ENERGY↗
DOE OSTI2026

Comparative techno-economic and environmental analysis of using nuclear energy and fossil energy with carbon sequestration in U.S. Gulf Coast petroleum refineries

U.S. Gulf Coast refineries have processing capacity of approximately 9.4 million barrels of crude oil per day—about 50% of U.S. national capacity—while consuming natural gas, electricity, and hydrogen, resulting in approximately 100 million metric tonnes (MMT) of onsite CO₂ emissions in 2022. This study evaluates two alternative refinery energy supply pathways: nuclear energy (NE) and fossil energy-derived hydrogen with carbon capture and sequestration (FE-CCS; autothermal reforming), intermittent renewable sources are not considered as they cannot reliably meet continuous industrial heat and hydrogen demands. Using publicly available data for refineries, we conducted a bottom-up, facility-level assessment to estimate energy use by type, well-to-gate refinery emissions, and associated costs of integration. Compared to current refinery operations using natural gas energy supply and conventional hydrogen production (steam methane reforming without sequestration), NE and FE-CCS could produce, respectively, average emissions reductions of 37% and 42%, total abatement costs of $\$$52–$\$$221 and $\$$211–$\$$612/MT CO₂, and additional costs of about $\$$0.2–$\$$6 and $\$$3–$\$$11 per barrel of crude, respectively. Our analysis indicates that 25 out of 27 refineries have lower total additional cost ($\$$/bbl.) for the NE scenario than the FE-CCS scenario, making a strong case for NE integration with petroleum refineries. This work's main contribution is a detailed bottom-up refinery-level analysis method that can be utilized by the worldwide refining industry and stakeholders as they assess different technological options, along with their costs and environmental impacts for a specific refinery operation.

Carbon capture and sequestration↗
DOE OSTI2022

Characterizing Sustained Solar-to-Hydrogen Electrocatalysis at Low Cell Potentials Enabled by Crude Glycerol Oxidation

Unassisted solar-driven water electrolysis as a sustainable source for H 2 is limited by the high overpotential necessary to drive the oxygen evolution reaction (OER). Crude glycerol is an extremely alkaline byproduct of biodiesel synthesis that can be valorized or refined to produce more desirable chemicals. Glycerol can also be directly oxidized on an anode, replacing water oxidation, to reduce the applied cell potential requirements of electrolytic H 2 production or CO 2 reduction. An advantage of oxidizing glycerol in its crude form is the opportunity to valorize it without initial refinement. We describe an approach to replace the OER half-reaction with the sacrificial crude glycerol electrooxidation on a layered Au–Pt–Bi electrocatalyst on a Ni substrate. Compared to compositions with fewer components, the AuPtBi–Ni electrocatalyst improved the duration of performance and reduced the overall cell potential for glycerol electrooxidation in the extreme alkaline solutions representative of crude glycerol. These enhancements facilitated extended, unassisted hydrogen evolution from crude glycerol electrolysis, even under the power of a single-junction silicon solar cell at less than 1 sun illumination. We characterized the oxidation products of crude glycerol electrolysis and the subsequent products formed spontaneously in the electrolyte in the highly alkaline solution. This analysis helps to both identify the stoichiometric limits of glycerol oxidation at the low cell potentials of interest here and to understand the chemical control imparted by electrocatalysis on the ultimate compounds formed in the crude solution. Furthermore, the results for the AuPtBi electrocatalyst show that incorporating crude glycerol oxidation into integrated electrochemical systems can simultaneously simplify their design and significantly improve solar-to-hydrogen rates.

08 HYDROGEN↗
DOE OSTI2024

Modeling of H2 Dispersion at ARIES

Hydrogen is a versatile and clean energy carrier that can be produced from various renewable sources such as wind, solar, and hydropower and help decarbonize electricity grids, industry, and transportation. Using the Hydrogen Research Facility under Advanced Research on Integrated Energy Systems (ARIES) at the National Renewable Energy Laboratory's (NREL) Flatirons campus as a test bench, the study examines the feasibility, useability, and value of using computational fluid dynamics (CFD) techniques to model hydrogen dispersion. The ARIES facility was chosen because controlled hydrogen releases can be performed at a rate of 27 kg-H2/hr. Site-specific atmospheric and weather condition data such as wind speed and temperature were used as inputs to the model. The results show statistical distributions and ranges of hydrogen concentrations at locations throughout the domain. Wind conditions are found to significantly impact the release behavior, including the hydrogen cloud's direction and concentrations. At low wind speeds (below 1 mph), hydrogen forms a cloud and at higher wind speeds (> 2-4 mph) hydrogen plume stretches in the direction of wind momentum. From >100 simulations for ARIES site-specific conditions, statistical quantities combined with a clustering algorithm were used to propose sensor location at various elevations from ground.

dispersion↗
DOE OSTI2022

Recent Advances and Prospects in Design of Hydrogen Permeation Barrier Materials for Energy Applications—A Review

The hydrogen infrastructure involves hydrogen production, storage and delivery for utilization with clean energy applications. Hydrogen ingress into structural materials can be detrimental due to corrosion and embrittlement. To enable safe operation in applications that need protection from hydrogen isotopes, this review article summarizes most recent advances in materials design and performance characterization of barrier coatings to prevent hydrogen isotopes’ absorption ingress and permeation. Barriers are crucial to prevent hydride formation and unwanted hydrogen effects to increase safety, materials’ lifetime and reduce cost for applications within nuclear and renewable energy. The coating may be applied on a material that requires protection from hydrogen pick-up, transport and hydride formation in hydrogen storage containers, in pipelines, spent nuclear fuel storage or in nuclear reactors. While existing, commercial coatings that have been much in use may be satisfactory for various applications, it is desirable to evaluate whether alternative coating concepts can provide a greater resistance to hydrogen isotope permeation along with other improved properties, such as mechanical strength and thermal resistance. The information presented here is focusing on recent findings within the past 5–7 years of promising hydrogen barriers including oxides, nitrides, carbon, carbide, MAX-phases and metals and their mechanical strength, hydrogen pick-up, radiation resistance and coating manufacturing techniques. A brief introduction to hydrogen permeation is provided. Knowledge gaps were identified to provide guidance for material’s research prospects.

08 HYDROGEN↗
DOE OSTI2026

Techno-Economic Analysis of Repurposing Natural Gas Transmission Pipeline Networks to Accommodate Hydrogen Blends

Blending hydrogen into natural gas infrastructure could supplement natural gas supply and increase resilience for applications such as ammonia production, peaking and load-following power plants, and heating. The United States has an extensive network of natural gas pipelines, but the feasibility of employing this infrastructure to transport hydrogen is unclear. We analyze the costs associated with repurposing three distinct natural gas transmission pipelines in different locations within the United States to carry blends of hydrogen up to 100% via three different pipeline network modification methods and compare against the cost of building a new dedicated hydrogen pipeline. We conduct a sensitivity analysis on the hoop stress limit of the existing pipe, techno-economic parameters, emissions, and relative capacity. The results show that the capital costs required to upgrade a pipeline can vary from tens of millions to billions of dollars depending on the length and capacity of the existing pipeline section, whether the existing pipeline already operates at or below its maximum allowable operating pressure, whether future demand is expected to increase or decrease, the network modification method selected, and pipe material costs. The delivered cost of energy to end users is impacted less by the levelized cost of transporting hydrogen blends than by the cost of the natural gas and hydrogen fuels being transported. The emissions impact of blending hydrogen into natural gas transmission networks scales proportionally with the amount of energy displaced with low-emission hydrogen (such as from natural gas with carbon capture and sequestration or electrolysis powered by nuclear, renewable, or geothermal electricity), therefore low blend ratios (e.g., < 20% vol. hydrogen) will result in low emissions impacts. Factors such as permitting and right-of-way costs, the proximity of the pipeline to hydrogen demand and production, and the compatibility of and/or retrofitting costs of end-use gas-fueled technologies will likely be greater drivers in determining whether converting a particular natural gas pipeline to carry hydrogen makes economic sense.

08 HYDROGEN↗
DOE OSTI2020

A High-Rate Lithium Manganese Oxide-Hydrogen Battery

Rechargeable hydrogen gas batteries show promises for the integration of renewable yet intermittent solar and wind electricity into the grid energy storage. Here, we describe a rechargeable, high-rate, and long-life hydrogen gas battery that exploits a nanostructured lithium manganese oxide cathode and a hydrogen gas anode in an aqueous electrolyte. The proposed lithium manganese oxide-hydrogen battery shows a discharge potential of ~1.3 V, a remarkable rate of 50 C with Coulombic efficiency of ~99.8%, and a robust cycle life. A systematic electrochemical study demonstrates the significance of the electrocatalytic hydrogen gas anode and reveals the charge storage mechanism of the lithium manganese oxide-hydrogen battery. This work provides opportunities for the development of new rechargeable hydrogen batteries for the future grid-scale energy storage.

25 ENERGY STORAGE↗
DOE OSTI2022

Hydrogen Storage for Flexible Fossil Fuel Power Generation: Integration of Underground Hydrogen Storage with Gas Turbine (Final Report)

As the nation continues to encourage, through market structures and financial incentives, the proliferation of intermittent renewable electricity, how to optimize the ever-changing electric grid and identify means to retain and improve resilience, while ensuring continued reductions in GHG emissions, will be critical. According to Bloomberg, wind & solar generated 10.5% of US electricity in 2020 and that percentage continues to grow. In support of expanding renewable energy use, and to address its intermittent nature, this project will develop the Hydrogen Storage for Flexible Fossil Fuel Power Generation platform that is dispatchable, reliable, repeatable and have the ability to produce zero or negative carbon power while interfacing with geology capable of CO2 and hydrogen storage. GTI Energy (GTIE) and team members Illinois State Geological Survey (ISGS), Mitsubishi Heavy Industries America (MHIA), Ameren Illinois, Hexagon Purus, and the Low Carbon Resources Initiative (LCRI) completed a Phase I Conceptual Study under contract DE-FE0032012 for Hydrogen Storage for Flexible Fossil Fuel Power Generation: Integration of Underground Hydrogen Storage with Gas Turbine. The Hydrogen Storage for Flexible Fossil Fuel Power Generation platform addresses the intermittent nature of the expanding use of Variable Renewable Energy (VRE) generation. The low cost of the electricity (COE) generated results in greater dispatch and more operation at higher power levels (higher efficiency), fewer short intervals, and fewer start/stop cycles. The reliable, resilient system can produce zero carbon power and store hydrogen. It will demonstrate hydrogen storage in geologic formations like those used in natural gas underground storage thus enabling large scale storage of hydrogen in sedimentary strata across the United States rather than in geographically restricted salt caverns. The Phase I study confirmed the system is feasible and generates power at lower cost than other low carbon approaches. The demonstration defines the pathway for broad commercial application and will accelerate the development of larger systems suitable for centralized utility scale electricity production. The study advanced the maturity of the H 2 storage-based system with flexible power generation by completing a Pre-FEED study (Phase II). The Pre-FEED focused on the selected Energy Farm on the University of Illinois Urbana-Champaign (UIUC) site that includes above ground and underground hydrogen storage, low-carbon hydrogen production (GTI’s Compact Hydrogen Generator, CHG) with underground CO2 sequestration, and a 40-MW class gas turbine. The Pre-FEED addressed the entire system and its interconnection to the natural gas and electric grid and mitigation of key risks, such as storage behavior, load-following, and system operation. During Phase 1 of the project, the team completed key tasks, which moved the entire demonstration project, specific components and approaches closer to commercialization. These Phase I Accomplishments include: Completing System Requirements Review; Completing System Layout and Modeling - Heat & Mass Balance and Process Flow Diagram; Completing modelling of 9 turbine performance cases; Evaluating rock strata for underground storage of hydrogen and sequestration of carbon dioxide; Completing initial modelling of underground storage of hydrogen and withdrawal with evaluation of loss and water production; Identifying roadable storage for above ground hydrogen storage; Identifying existing electrical infrastructure for receiving/delivering electricity; Identifying existing gas supply infrastructure for receiving natural gas; Document concept design/development plans in required reports. Conclusions: The 12-month Feasibility study in Phase I study was completed and confirmed the system is feasible and generates power at lower cost than other low carbon approaches and even lower cost than the reference NGCC plant without carbon capture when taking advantage of 45Q carbon credits. The study enabled the fidelity of the concept to be improved and allowed identification of the requirements for the system. Defining the individual system and component requirements was performed via the system requirements review with the whole team. These requirements were then incorporated into and iterated with our Heat & Mass Balance process model and process flow diagrams were generated to reflect the overall system. This information was then used to complete the TEA and show economic feasibility. Large scale non-salt geologic storage of hydrogen is an enabling technology for a hydrogen-fired turbine that can be retrofitted into large-scale electric generating units (EGU). Our demonstration will include 428 MWh or ~4 hours full load of hydrogen storage (above and underground). Carbon capture inherent to the CHG process can capture 90% CO 2 (with upgrades to >98%). This system provides a COE of 23% savings relative to an NGCC with a post combustion amine system. Our proposed storage system decouples carbon capture and hydrogen production from power production; therefore, we expect our proposed system’s efficiency and variable COE to be superior resulting in overall higher dispatch and reduced deep cycling. Our demonstration will be full to multi-day hydrogen storage and has the potential for longer (seasonal) duration commercially. The demonstration defines the pathway for broad commercial application and will accelerate the development of larger systems suitable for centralized utility scale electricity production.

03 NATURAL GAS↗
DOE OSTI2021

Analyzing the Economic and Technical Potential of H2@Scale

H2@Scale is one of EERE's flagship initiatives to enable clean and affordable hydrogen production, storage, distribution, and utilization across multiple sectors in the economy. The January H2IQ hour will discuss results from a recent multi-laboratory analysis report quantifying the technical and economic potential of H2@Scale, given the use of hydrogen as an energy intermediate to integrate sectors in the U.S. energy system. Mark Ruth of the National Renewable Energy Laboratory, the lead author of the report, will discuss specific examples of the role hydrogen can play in industry and transportation sectors, such as steelmaking, synthetic fuels, and blending into natural gas pipelines. He will also explain how hydrogen production can be integrated with the electric grid to monetize low-cost energy and incentivize growth in renewable energy supply. The H2IQ Hour will dive into estimates for future hydrogen consumption in current and emerging sectors, given R&D advances and varying prices of natural gas and electricity.

39 EE - Hydrogen and Fuel Cell Technologies (EE-3F↗