Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Power Tower”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Intensified array camera imaging of solid surface combustion aboard the NASA Learjet

An intensified array camera was used to image weakly luminous flames spreading over thermally thin paper samples in a low gravity environment aboard the NASA-Lewis Learjet. The aircraft offers 10 to 20 sec of reduced gravity during execution of a Keplerian trajectory and allows the use of instrumentation that is delicate or requires higher electrical power than is available in drop towers. The intensified array camera is a charge intensified device type that responds to light between 400 and 900 nm and has a minimum sensitivity of 10(exp 6) footcandles. The paper sample, either ashless filter paper or a lab wiper, burns inside a sealed chamber which is filled with 21, 18, or 15 pct. oxygen in nitrogen at one atmosphere. The camera views the edge of the paper and its output is recorded on videotape. Flame positions are measured every 0.1 sec to calculate flame spread rates. Comparisons with drop tower data indicate that the flame shapes and spread rates are affected by the residual g level in the aircraft.

Weiland, Karen J.↗

Intensified array camera imaging of solid surface combustion aboard the NASA Learjet

An intensified array camera has been used to image weakly luminous flames spreading over thermally thin paper samples in a low-gravity environment aboard the NASA-Lewis Learjet. The aircraft offers 10 to 20 sec of reduced gravity during execution of a Keplerian trajectory and allows the use of instrumentation that is delicate or requires higher electrical power than is available in drop towers. The intensified array camera is a charge intensified device type that responds to light between 400 and 900 nm and has a minimum sensitivity of 10(exp 6) footcandles. The paper sample, either ashless filter paper or a lab wiper, burns inside a sealed chamber which is filled with 21, 18, or 15 pct. oxygen in nitrogen at one atmosphere. The camera views the edge of the paper and its output is recorded on videotape. Flame positions are measured every 0.1 sec to calculate flame spread rates. Comparisons with drop tower data indicate that the flame shapes and spread rates are affected by the residual g level in the aircraft.

Weiland, Karen J.↗

Lunar COTS Mission Concept: Using the Moon's Resources to Enable an Economical and Sustainable Pathway to Mars and Beyond

To support and enable future human missions to the surface of the Moon, a new plan was formulated to gradually develop an economical, evolvable and sustainable lunar infrastructure using a public/private partnerships between NASA and industry to share cost and risk in the development phase and ultimately transfer operation of these infrastructure services to its industry owners. These infrastructure services may include but are not limited to the following: lunar cargo transportation, power stations, energy storage devices, communication towers and relay satellites, and resource extraction operations. The plan is called the Commercial Orbital Transfer Services (COTS) Program, using NASA's well-proven Commercial Orbital Transportation Services (COTS) Program acquisition model.

Zuniga, A. F.↗

Computational and Physics-Based Modeling for the Development of in-Space Welding Technology

Welding will be an enabling technology for in-space assembly and manufacturing (ISAM) and in-space repair operations in support of the growing Space Economy. Prospective use cases of welding include metal repair on long-duration lunar surface missions and assembly of large structures that exceed dimensions of the currently available launch vehicle envelopes such as space arrays, tall lunar transmission towers, or even large transit vehicles powered by nuclear propulsion. There is a brief history of beam welding for in-space use. Soviet and NASA astronauts performed electron beam welds (EBW) in space in the late-1960s through mid-1980s and several parabolic flights of laser beam welding (LBW) were undertaken in the USA and Canada in the early-1990s. Work has since stagnated until the recent boom of the in-space economy has demonstrated need for continued development of EBW and LBW processes, which are desirable for their compactness, low mass, low power consumption, and high wall plug efficiency. No space-based manufacturing laboratory capable of demonstrating, developing, and applying welding processes exists, and costs are high to develop and fly individual space-based trials. This drives the current approach to develop welding technology with computational and physics-based models in tandem with earth-based experiments. Several approaches are taken to complement and drive the selection of instrumentation for planned parabolic and suborbital flights. First, a thermal model of Skylab EBW experiments is established and compared to empirical data. Next, the model is used to show variation between Earth-based and in-space weld structure and properties through exploration of key variables that define the Low earth orbit and lunar surface space environments, namely temperature (40 – 400 K), pressure (10-10 to 104 Pa), and gravity (10-6 g to 1 g). Finally, physical processes associated with heat and mass transport during welding are evaluated through several case studies across the above variable ranges demonstrating need for further research.

in-space welding↗

Use of nanofiltration to reduce cooling tower water consumption.

Nanofiltration (NF) can effectively treat cooling-tower water to reduce water consumption and maximize water usage efficiency of thermoelectric power plants. A pilot is being run to verify theoretical calculations. A side stream of water from a 900 gpm cooling tower is being treated by NF with the permeate returning to the cooling tower and the concentrate being discharged. The membrane efficiency is as high as over 50%. Salt rejection ranges from 77-97% with higher rejection for divalent ions. The pilot has demonstrated a reduction of makeup water of almost 20% and a reduction of discharge of over 50%.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Unmanned Aerial Vehicle Path Generation for Image Collection to Assist Heliostat Field Optical Characterization

This paper focuses on applications of unmanned aerial vehicles (UAVs) for measuring optical error of heliostats in concentrating solar power (CSP) plants. In CSP, there is a need to measure solar-field optical errors, which is critical for future production improvement as well as for operations and maintenance of a heliostat field. This latter need is particularly challenging because of the large number of heliostats (over 10,000 for a utility-scale power plant) that individually track the sun in the field. To address this issue, a camera-equipped UAV, with an optimized drone flight path developed and uploaded to it, collects images of a precise reflection of the tower on each heliostat to evaluate optical error sources without interrupting plant operation. Generation of the drone path for capturing the reflected images is affected by a number technical and realistic constraints, which include the camera angle used to capture the image, the blocking of the camera view due to surrounding heliostats, the location of the camera in reference to the target heliostat, and the target heliostat position with reference to the tower. The effect of these constraints on calculating the camera position will be discussed in detail in this article. An effective drone-path algorithm is generated to fulfil the need of image collection under various constraints.

concentrated solar power↗

Dispatchable Solar Power Plant Project

As penetration of intermittent renewable power increases, grid operators must manage greater variability in the supply and demand on the grid. One result is that utilities are planning to build many new natural gas peaking power plants that provide added flexibility needed for grid management. This report discusses the development of a dispatchable solar power (DSP) plant that can be used in place of natural gas peakers. Specifically, a new molten-salt tower (MST) plant has been developed that is designed to allow much more flexible operation than typically considered in concentrating solar power plants. As a result, this plant can provide most of the capacity and ancillary benefits of a conventional natural gas peaker plant but without the carbon emissions. The DSP system presented was designed to meet the specific needs of the Arizona Public Service (APS) utility 2017 peaking capacity request for proposals (RFP). The goal of the effort was to design a MST peaker plant that had the operational capabilities required to meet the peaking requirements of the utility and be cost competitive with the natural gas alternative. The effort also addresses many perceived barriers facing the commercial deployment of MST technology in the US today. These include MST project development issues such as permitting, avian impacts, visual impacts of tower CSP projects, project schedule, and water consumption. The DSP plant design is based on considerable analyses using sophisticated solar system design tools and in-depth preliminary engineering design. The resulting DSP plant design uses a 250 MW steam power cycle, with solar field designed to fit on a square mile plot of land that has a design point thermal rating of 400 MWt. The DSP plant has an annual capacity factor of about 16% tailored to deliver greater than 90% capacity during the critical Arizona summer afternoon peak. The table below compares the All-In energy cost and capacity payment of conventional combustion turbines to DSP plants. These results estimate that the cost of the DSP plant is about 10% higher than a similarly-sized and operated frame combustion turbine and slightly cheaper than an aero derivative combustion turbine when APS reference fuel and emissions costs are included. The DSP plant cost is based on a single, first-of-a-kind plant, and it is likely that subsequent plants would be less expensive.

14 SOLAR ENERGY↗

MONITORING WASTE HEAT REJECTION TO THE ENVIRONMENT VIA REMOTE SENSING

Nuclear power plants typically use waste heat rejection systems such as cooling lakes and natural draft cooling towers. These systems are designed to reduce cooling water temperatures sufficiently to allow full power operation even during adverse meteorological conditions. After the power plant is operational, the performance of the cooling system is assessed. These assessments usually rely on measured temperatures of the cooling water after it has lost heat to the environment and is being pumped back into the power plant (cooling water inlet temperature). If the cooling system performance is not perceived to be optimal, the utility will collect additional data to determine why. This paper discusses the use of thermal imagery collected from aircraft and satellites combined with numerical simulation to better understand the dynamics and thermodynamics of nuclear power plant waste heat dissipation systems. The ANS meeting presentation will discuss analyses of several power plant cooling systems based on a combination of remote sensing data and hydrodynamic modeling.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Sizing, Buckling, and Thermal-Structural Analysis of Tall Lunar Tower

Tall lunar towers enable direct collection of solar energy using solar panels that can generate power exceeding 100-kW above shadowed regions on the surface. Tall lunar towers also support solar reflectors and concentrators for solar farms, which enable various mission architectures on the lunar surface. The Tall Lunar Tower (TLT) project at NASA Langley Research Center is focused on the design, modeling, fabrication, and testing of an assembled TLT Engineering Development Unit (EDU). In this paper, the design and analysis plan of a TLT is presented and predicted buckling and thermal-structural response of the TLT EDU on the lunar surface are investigated.

Kyongchan Song↗

Sizing, Buckling, and Thermal-Structural Analysis of Tall Lunar Tower

Tall lunar towers enable direct collection of solar energy using solar panels that can generate power exceeding 100-kW above shadowed regions on the surface. Tall lunar towers also support solar reflectors and concentrators for solar farms, which enable various mission architectures on the lunar surface. The Tall Lunar Tower (TLT) project at NASA Langley Research Center is focused on the design, modeling, fabrication, and testing of an assembled TLT Engineering Development Unit (EDU). In this paper, the design and analysis plan of a TLT is presented and predicted buckling and thermal-structural response of the TLT EDU on the lunar surface are investigated.

Kyongchan Song↗

Methods of Heat-Exchange Intensification in NPP Equipment

The aims and problems of research on the means for intensifying heat exchange in the equipment of nuclear power plants are examined: nuclear reactors, steam generators, turbine condensers, heat-exchangers of dry water cooling towers, intermediate separators-steam superheaters of turbines, heat-exchange apparatus of safety systems, turbo-electro-generators, oil coolers, feed-water heaters. Methods of identifying heat-exchange are analyzed: different types of finning, turbulence generators and swirlers of one- and two-phase flows, coating on heating surfaces, systems with mixed flow. Computational recommendations are made for determining the intensity of heat emission from promising types of heat-exchange surfaces: bundles of lowfinned tubes and spiral coils.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Wind turbine power production and annual energy production depend on atmospheric stability and turbulence

Using detailed upwind and nacelle-based measurements from a General Electric (GE) 1.5sle model with a 77 m rotor diameter, we calculate power curves and annual energy production (AEP) and explore their sensitivity to different atmospheric parameters to provide guidelines for the use of stability and turbulence filters in segregating power curves. The wind measurements upwind of the turbine include anemometers mounted on a 135 m meteorological tower as well as profiles from a lidar. We calculate power curves for different regimes based on turbulence parameters such as turbulence intensity (TI) as well as atmospheric stability parameters such as the bulk Richardson number ( R B ). We also calculate AEP with and without these atmospheric filters and highlight differences between the results of these calculations. The power curves for different TI regimes reveal that increased TI undermines power production at wind speeds near rated, but TI increases power production at lower wind speeds at this site, the US Department of Energy (DOE) National Wind Technology Center (NWTC). Similarly, power curves for different R B regimes reveal that periods of stable conditions produce more power at wind speeds near rated and periods of unstable conditions produce more power at lower wind speeds. AEP results suggest that calculations without filtering for these atmospheric regimes may overestimate the AEP. Because of statistically significant differences between power curves and AEP calculated with these turbulence and stability filters for this turbine at this site, we suggest implementing an additional step in analyzing power performance data to incorporate effects of atmospheric stability and turbulence across the rotor disk.

17 WIND ENERGY↗

Permeation testing of thermal power plant cooling water impacts of Graphite Oxide (GO)/polymer membranes

The purpose of this project was to investigate how thermoelectric power plant cooling water impacts the energy demands, permeance, and ion rejection of GO/polymer membranes using extended permeation testing. Treatment of cooling tower blowdown water is challenging since this water contains scalants (e.g.: silica, calcium sulfate, calcium carbonate) which can precipitate on membranes, decreasing membrane efficiency and lifetime. In this collaboration with EPRI and a Southwestern US utility, the performance of GO/polymer membranes in desalinating cooling tower blowdown water from three natural-gas fueled power plants was evaluated. Results of cross-flow desalination test durations of three to four weeks demonstrated the long-term stability of the membranes. GO/polymer desalination membranes were shown to tolerate drinking-water level chlorination, which could reduce capital and operational costs. Biofouling and scale formation were minimal on the GO surface, suggesting that industry standard intensive cleaning steps could be reduced. Results also demonstrated pressure-tunable rejection which would allow treat-to-need water recycling, thus likely reducing energy costs for these membranes. Further development of biofouling and scaling resistant desalination membranes could lead to reduced cost for water treatment, potentially allowing for greater use of non-traditional water supplies for thermoelectric power plants.

Biedermann, Laura↗

Design, performance, and field operation of twisting heliostats for 3,000-sun concentration and high temperature

The idea is to combine the solar energy reflected from a field of many heliostats to obtain a single focus of high concentration and high power. We exploit a new type of “twisting” heliostat” in which as the mount is moved to track the sun through the day, the reflector shape is twisted to maintain a focused image of the sun’s disc on the target, through the day over a wide range of angles of incidence. By combining the light reflected by many twisting heliostats into a single focus, we are not only able to accomplish but also maintain very high concentration and temperature through the day, with higher efficiency than has previously been possible with conventional heliostats having a fixed shape. A circular field of twisting heliostats is used to power a single intense focus atop a central tower. The light from all the heliostats is relayed to an upward facing receiver at the focus via a central Cassegrain secondary reflector located above the receiver. In a specific design targeting 1 MW of power, a 100 m diameter field arrays 431 twisting heliostats, each with a 7 m2 reflector. The secondary reflector ,7.2 m in diameter, is located 24 m above the heliostat field, bringing sunlight with annual average power of 1 MW to a circular focus 0.8 m in diameter, at a concentration averaging 3,000 suns.

14 SOLAR ENERGY↗

Coagulation chemistries for silica removal from cooling tower water.

The formation of silica scale is a problem for thermoelectric power generating facilities, and this study investigated the potential for removal of silica by means of chemical coagulation from source water before it is subjected to mineral concentration in cooling towers. In Phase I, a screening of many typical as well as novel coagulants was carried out using concentrated cooling tower water, with and without flocculation aids, at concentrations typical for water purification with limited results. In Phase II, it was decided that treatment of source or make up water was more appropriate, and that higher dosing with coagulants delivered promising results. In fact, the less exotic coagulants proved to be more efficacious for reasons not yet fully determined. Some analysis was made of the molecular nature of the precipitated floc, which may aid in process improvements. In Phase III, more detailed study of process conditions for aluminum chloride coagulation was undertaken. Lime-soda water softening and the precipitation of magnesium hydroxide were shown to be too limited in terms of effectiveness, speed, and energy consumption to be considered further for the present application. In Phase IV, sodium aluminate emerged as an effective coagulant for silica, and the most attractive of those tested to date because of its availability, ease of use, and low requirement for additional chemicals. Some process optimization was performed for coagulant concentration and operational pH. It is concluded that silica coagulation with simple aluminum-based agents is effective, simple, and compatible with other industrial processes.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Wind Generation Feasibility Study for Sac & Fox Tribe of the Mississippi in Iowa (Meskwaki Nation)

The Meskwaki Nation will obtain an anemometer tower. Install the tower at the site that has been pre-qualified as the site most likely to produce maximum electric power from the wind. It will collect meteorological data from the tower's sensors for a one year period, as required for due diligence to identify the site as appropriate for the installation of a wind turbine to provide electric power for the community. Have the collected data analyzed by a meteorologist and a professionally certified wind engineer to produce the reports of expected power generation at the site, for the specific wind turbine(s) under consideration for installation.

17 WIND ENERGY↗

Wake characteristics of a tower for the DOE-NASA MOD-1 wind turbine

A 1/40th scale model of a tower concept designed for a MOD-1 wind power turbine was tested in a low speed wind tunnel. Wake wind speed profiles were measured, and from these were determined local values of wake minimum velocity ratio, average velocity ratio, and width over a range of tower elevations and wind approach angles. Comparison with results from two other all tubular models (MOD-0 and eight leg designs) tested earlier in the same tunnel indicated that wake width and flow blockage at the rotor plane of rotation were slightly larger for the MOD-1 tower than for the other two models. The differences in wake characteristics were attributed to differences in tower geometry and member dimensions.

Savino, J. M.↗

Comparing Poynting flux dominated magnetic tower jets with kinetic-energy dominated jets

Magnetic towers represent one of two fundamental forms of MHD out flows. Driven by magnetic pressure gradients, these flows have been less well studied than magneto-centrifugally launched jets even though magnetic towers may well be as common. We present new results exploring the behavior and evolution of magnetic tower outflows and demonstrate their connection with pulsed power experimental studies and purely hydrodynamic jets which might represent the asymptotic propagation regimes of magneto-centrifugally launched jets. High-resolution AMR MHD simulations (using the AstroBEAR code) provide insights into the underlying physics of magnetic towers and help us constrain models of their propagation. Our simulations have been designed to explore the effects of thermal energy losses and rotation on both towerflows and their hydro counterparts. We find these parameters have significant effects on the stability of magnetic towers, but mild effects on the stability of hydro jets. Current-driven perturbations in the Poynting Flux Dominated (PDF) towers are shown to be amplified in both the cooling and rotating cases. Our studies of the long term evolution of the towers show that the formation of weakly magnetized central jets within the tower are broken up by these instabilities becoming a series of collimated clumps which magnetization properties vary over time. In addition to discussing these results in light of laboratory experiments, we address their relevance to astrophysical observations of young star jets and outflow from highly evolved solar type stars.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗