Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Polycrystalline structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Neutron diffraction and magnetic study of the low-temperature transitions in SrMo{sub 1−x}Fe{sub x}O{sub 3−δ}

Highlights: ► SrMo{sub 1−x}Fe{sub x}O{sub 3−δ} (x = 0, 0.1, 0.2 and 0.3) were obtained as polycrystalline powders. ► Cooling, two structural transitions are identified, tetragonal and orthorhombic. ► DSC curves exhibit an endothermic peak close to 240 K. ► Magnetic behavior of the samples changes, inducing a ferromagnetic character. ► The tilt angles are appreciably high at low temperatures. -- Abstract: SrMo{sub 1−x}Fe{sub x}O{sub 3−δ} (x = 0, 0.1, 0.2 and 0.3) perovskites have recently been described as performing anode materials in solid-oxide fuel cells. In this work, we describe the structural phase transitions they undergo below room-temperature (RT), studied “in-situ” from neutron powder diffraction data and DSC measurements. At RT all the studied compositions are cubic, space group Pm-3m, with unit-cell parameters that decrease with Fe doping. Upon cooling the samples, two structural phase transitions are identified: one to a tetragonal structure with I4/mcm space group (around T{sub 1} = 240 K), and the second one to an orthorhombic Imma phase below T{sub 2} = 100 K. The magnetic properties have also been evaluated; the Fe substitution drives an evolution from a Pauli-paramagnetic state (x = 0) to a weak ferromagnetic state combined with antiferromagnetic interactions; the susceptibility and the saturation magnetization increases monotonically with increasing the Fe-doping content.

36 MATERIALS SCIENCE↗

The synthesis of CuO and NiO nanoparticles by facile thermal decomposition of metal-Schiff base complexes and an examination of their electric, thermoelectric and magnetic Properties

Highlights: • Thermal decomposition of Schiff base complexes provides a convenient and effective pathway to fabricate CuO and NiO NPs. • The electrical conduction in CuO NPs and NiO NPs is governed by intrinsic band-to-band type and large polarons conduction mechanism, respectively. • The thermoelectric measurements confirm that the NPs are P-type degenerate semiconductors. • The NPs show weak ferromagnetic ordering at room temperature and antiferromagnetic to paramagnetic transition with high dipolar interaction. - Abstract: In this study, CuO and NiO NPs have been synthesized by facile thermal decomposition of Schiff base complexes and their physical properties have been examined. The synthesized CuO and NiO NPs are crystallized in polycrystalline monoclinic and cubic structures with average particle size 17 ± 0.4 and 62 ± 1 nm, respectively. The electrical conductivity measurements confirm that the conduction in the CuO NPs is a band-to-band type while the conduction in the NiO NPs is governed by the large polaron conduction mechanism. The thermoelectric measurements confirm that the CuO and NiO NPs are P-type degenerate semiconductors with room temperature Seebeck coefficients equal to 89.9 and 12.1 mV/K, respectively. The magnetic measurements exhibit that the NPs have weak ferromagnetic ordering and antiferromagnetic to paramagnetic transition with high dipolar interaction.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal defect annealing of swift heavy ion irradiated ThO 2

Neutron total scattering and Raman spectroscopy were used to characterize the structural recovery of irradiated polycrystalline ThO 2 (2.2 GeV Au, = 1 x 10 13 ions/cm 2 ) during isochronal annealing. Here, neutron diffraction patterns showed that the Bragg signal-to-noise ratio increases and the unit cell parameter decreases as a function of isochronal annealing temperature, with the latter reaching its pre-irradiation value by 750 °C. Diffuse neutron scattering and Raman spectroscopy measurements indicate that an isochronal annealing event occurs between 275$-$425 °C. This feature is attributed to the annihilation of oxygen point defects and small oxygen defect clusters.

36 MATERIALS SCIENCE↗

Photoelectrochemical properties of CdS{sub x}Se{sub 1-x} films

CdS{sub x}Se{sub 1-x} films of different composition (0 < x < 1) were deposited by pulse plating technique at different duty cycles in the range of 10-50%. The films were polycrystalline and exhibited hexagonal structure. The band gap of the films varies from 1.68 to 2.39 eV as the concentration of CdS increases. Energy Dispersive analysis of X-rays (EDAX) measurements indicate that the composition of the films are nearly the same as that of the precursors considered for the deposition. Atomic force microscopy studies indicated that the grain size increased from 20 to 200 nm as the concentration of CdSe increased. Photoelectrochemical (PEC) cell studies indicated that the films of composition CdS{sub 0.9}Se{sub 0.1} exhibited maximum photoactivity. Mott-Schottky studies indicated that the films exhibit n-type behaviour. Spectral response measurements indicated that the photocurrent maxima occurred at the wavelength value corresponding to the band gap of the films. (author)

14 SOLAR ENERGY↗

The Bright Side and Dark Side of Hybrid Organic–Inorganic Perovskites

The previously developed bistable amphoteric native defect (BAND) model is used for a comprehensive explanation of the unique photophysical properties and for understanding the remarkable performance of perovskites as photovoltaic materials. It is shown that the amphoteric defects in the donor (acceptor) configuration capture a fraction of photoexcited electrons (holes) dividing them into two groups: higher-energy bright and lower-energy dark electrons (holes). The spatial separation of the dark electrons and dark holes and the k-space separation of the bright and dark charge carriers reduce electron-hole recombination rates, emulating the properties of an ideal photovoltaic material with a balanced, spatially separated transport of electrons and holes. The BAND model also offers a straightforward explanation for the exceptional insensitivity of the photovoltaic performance of polycrystalline perovskite films to structural and optical inhomogeneities. The blue-shifted radiative recombination of bright electrons and holes results in a large anti-Stokes effect that provides a quantitative explanation for the spectral dependence of the laser cooling effect measured in perovskite platelets.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Sn-InAs Nanowire Shadow-Defined Josephson Junctions

Hybrid superconductor–semiconductor platforms are foundational to advancing quantum information technologies, motivating the integration of materials with clean interfaces, robust superconductivity, and scalable architectures. Here, in this work, we report the synthesis and analysis of inclined InAs nanowires, conformally coated with β-Sn shells. These nanowires extend in opposite in-plane directions, forming a self-aligned, criss-cross network. This enables the deterministic formation of nanowire-shadow Josephson junctions through angle-controlled, low-temperature Sn deposition. Structural characterization shows uniform polycrystalline β-Sn shells forming a sharp, diffusion-free interface with InAs. Low-temperature transport measurements reveal a hard induced superconducting gap ≈ 600 μeV, switching currents up to ≈ 500 nA, and parallel magnetic field resilience beyond 1T. These results establish β-Sn/InAs nanowire networks as a promising platform for superconducting qubits, low-noise microwave devices, and the exploration of exotic superconducting phases including triplet pairing and topological superconductivity.

B-Sn↗

Use of Arrott plots to identify Néel temperature (T{sub N}) in metamagnetic Ni{sub 48}Co{sub 6}Mn{sub 26}Al{sub 20} polycrystalline ribbons

(Ni{sub 48}Co{sub 6})Mn{sub 26}Al{sub 20} polycrystalline ribbons with B2 structure at room temperature are investigated. Considering the presence of competing magnetic interactions, Arrott-plot analysis gives T{sub N} ∼ 170 K. A broad ferromagnetic-paramagnetic transition (T{sub C}) is observed at ∼200 K. H-T phase-diagram is used to validate the presence of competing exchange interactions that persist till very close to T{sub C}. Based on Néel theory, a cluster model is used to explain the presence of ferromagnetic and antiferromagnetic clusters in the sample. Formation of ferromagnetic clusters can be understood in terms of positive exchange interactions among the Mn atoms that are neighboring Co atoms located at Ni sites.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electronic and optical properties of Ga{sub 3−x}In{sub 5+x}Sn{sub 2}O{sub 16}: An experimental and theoretical study

Experimental measurements of optical and electronic properties and local-density approximation (LDA) calculations on polycrystalline Ga{sub 3−x}In{sub 5+x}Sn{sub 2}O{sub 16}—the so-called “T-phase” in the Ga{sub 2}O{sub 3}-In{sub 2}O{sub 3}-SnO{sub 2} ternary system—have revealed it to be a good candidate for n-type transparent conducting oxide applications, particularly in the replacement of tin-doped indium oxide as a transparent electrode in organic photovoltaics. Room temperature conductivity of over 1000 S cm{sup −1} was measured in polycrystalline bulk samples. Band structure calculations reveal a highly dispersed conduction band, corresponding to an electron effective mass of about 0.2 m{sub e}. Normalized carrier mobility and concentration trends indicate that conductivity changes in T-phase are attributable to changes in carrier concentration, with mobility remaining relatively constant through the range of processing conditions and sample composition. Screened exchange LDA calculations yield a fundamental band gap of about 2.60 eV. A relatively constant optical band gap in the range of 2.9–3.0 eV along the range of T-phase composition was measured by diffuse reflectance of bulk samples, whereas ab-initio simulations predict a decreasing fundamental band gap with increasing In-to-Ga ratio. This is attributed to an increasing Burstein-Moss shift—corresponding to increasing free electron concentration—with increasing In-to-Ga ratio.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhancement of photo sensor properties of nanocrystalline ZnO thin film by swift heavy ion irradiation

Nanocrystalline Zinc Oxide (ZnO) thin film prepared by Low cost Successive Ionic Layer Adsorption and Reaction (SILAR) method. This film was irradiated by 120 MeV Ni{sup 7+} ions with the fluence of 5x10{sup 12}ions/cm{sup 2}. The X-ray diffraction study was shows polycrystalline nature with wurtzite structure. The optical properties as absorbance were determined using UV-Spectrophotometer and band gap was also calculated. The Photo Sensor nature was calculated by I-V characteristics with different sources of light 40W, 60W and 100W.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Copper vapor-assisted growth of hexagonal graphene domains on silica islands

Silica (SiO{sub 2}) islands with a dendritic structure were prepared on polycrystalline copper foil, using silane (SiH{sub 4}) as a precursor, by annealing at high temperature. Assisted by copper vapor from bare sections of the foil, single-layer hexagonal graphene domains were grown directly on the SiO{sub 2} islands by chemical vapor deposition. Scanning electron microscopy, atomic force microscopy, Raman spectra, and X-ray photoelectron spectroscopy confirm that hexagonal graphene domains, each measuring several microns, were synthesized on the silica islands.

36 MATERIALS SCIENCE↗

Concentration Effects of Polymer Electrolyte Membrane Degradation Products on Oxygen Reduction Activity for Three Platinum Catalysts

A rotating disk electrode (RDE) along with cyclic voltammetry (CV) and linear sweep voltammetry (LSV), were used to investigate the impact of two model compounds representing degradation products of Nafion and 3M perfluorinated sulfonic acid membranes on the electrochemical surface area (ECA) and oxygen reduction reaction (ORR) activity of polycrystalline Pt, nano-structured thin film (NSTF) Pt (3M), and Pt/Vulcan carbon (Pt/Vu) (TKK) electrodes. ORR kinetic currents (measured at 0.9 V and transport corrected) were found to decrease linearly with the log of concentration for both model compounds on all Pt surfaces studied. Ultimately, model compound adsorption effects on ECA were more abstruse due to competitive organic anion adsorption on Pt surfaces superimposing with the hydrogen underpotential deposition (HUPD) region.

30 DIRECT ENERGY CONVERSION↗

Multiscale analysis in solids with unseparated scales: fine-scale recovery, error estimation, and coarse-scale adaptivity

There are several engineering applications in which the assumptions of homogenization and scale separation may be violated, in particular, for metallic structures constructed through additive manufacturing. Instead of resorting to direct numerical simulation of the macroscale system with an embedded fine scale, an alternative approach is to use an approximate macroscale constitutive model, but then estimate the model-form error using a posteriori error estimation techniques and subsequently adapt the macroscale model to reduce the error for a given boundary value problem and quantity of interest. Here, we investigate this approach to multiscale analysis in solids with unseparated scales using the example of an additively manufactured metallic structure consisting of a polycrystalline microstructure that is neither periodic nor statistically homogeneous. As a first step to the general nonlinear case, we focus here on linear elasticity in which each grain within the polycrystal is linear elastic but anisotropic.

42 ENGINEERING↗

Structural features of Sm{sub 1–x}Eu{sub x}S thin polycrystalline films

Thin polycrystalline Sm{sub 1–x}Eu{sub x}S films (x = 0.1, 0.167, 0.2, 0.25, 0.33, 0.5) were prepared by evaporation of SmS and EuS powders. Structural features of the films were investigated. The influence of Eu concentration and temperature of film deposition on the value of lattice parameter and sizes of X-гау coherent scattering regions was studied. It is shown that formation of Sm{sub 1–x}Eu{sub x}S films comes about according to the theory that was previously suggested for SmS films and that the deviation of lattice parameter is explained by the variable valence of samarium ions.

36 MATERIALS SCIENCE↗

Modulation of microstructure and optical properties of Mo-doped ZnO thin films by substrate temperature

Highlights: • Mo-doped ZnO films are obtained by sputtering at various substrate temperatures. • High-quality MZO thin films with good crystalline have been obtained at 200 °C. • Deposition temperature affects the amount of defects in the crystalline structure - Abstract: Mo-doped ZnO(MZO) films were deposited on Si (1 1 1) substrates by radio frequency sputtering at different substrate temperatures of 200, 300 and 400 °C. The effect of the substrate temperature on the structural and optical properties of the MZO films has been investigated. X-ray diffraction results reveal that all the films are polycrystalline with a hexagonal wurtzite structure with a preferential orientation according to the direction (0 0 2) plane. The crystallinity and surface morphologies of the films are strongly dependent on the growth temperature, which in turn exerts a great effect on microstructural and optical properties of the MZO films. The optical absorption measurements show high ultraviolet (UV) absorbance property of MZO with sharp and intense absorption band in this region and the optical band gap (E{sub g}) are 3.18, 3.22, 3.25 and 3.21 eV for the films deposited at room temperature, 200, 300 and 400 °C. The photoluminescence (PL) intensity of a strong broad violet–blue emission from MZO nanostructures with increasing deposited temperature was also observed. X-ray photoelectron spectroscopy (XPS) was employed to investigate the surface chemical composition of growth products.

36 MATERIALS SCIENCE↗

GBOpt: Grain boundary structure optimization using Monte Carlo and evolutionary algorithms

Polycrystalline materials are made of many small crystals separated by grain boundaries (GBs), whose atomic structure strongly influences material properties. Because the structure of a GB determines its properties, the optimal structure must be known in order to determine those impacts. There are many ways of placing atoms in the GB region, but the optimal structure is defined as the one that gives the lowest value of a target property (typically energy). GB structure optimization has been successfully demonstrated using stochastic and evolutionary methods, but no reusable, community-maintained open-source workflow has been developed. GBOpt (Grain Boundary Optimization) is an open-source Python package that creates that workflow, where we have presently implemented two approaches: Markov Chain Monte Carlo, and genetic algorithm based on elite selection. We demonstrate this capability by successfully reproducing the known optimal structures of a specific GB in two materials, and point interested readers to the GitHub repository for additional examples, including optimization for different properties. Both of the implemented approaches recovered the known structures, with the genetic algorithm approach finding the optimal structure faster on average.

99 - GENERAL AND MISCELLANEOUS↗

Molecular Dynamics Simulations of Displacement Cascades in Single and Polycrystalline Zirconia

Displacement cascades in zirconia have been studied using classical molecular dynamics simulations. Polycrystalline zirconia with nano-meter grains were created using Voronoi polyhedra construction and studied in comparison with single crystalline zirconia. The results show that displacement cascades with similar kinetic energy generated larger number of displaced atoms in polycrystalline than in the single crystal structure. The fraction of atoms with coordination number change was also higher in polycrystalline zirconia that was explained to be due to the diffusion of oxygen and relaxation at grain boundaries.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modification of the Surface of Nickel by the Femtosecond Laser Pulses

Experimental results of the formation of a periodic submicron structure on the surface of polycrystalline nickel (Ni) under laser irradiation in air and in a liquid medium (distilled water) are presented. The geometry of the formed surface structures is determined by electron-microscopy methods. When irradiated in air, the structure is formed above the base surface of the sample, and when irradiated in the liquid, it is formed below the base surface. The dimensions of the pure Ni nanoparticles formed during laser ablation of the nickel sample in the liquid were determined.

36 MATERIALS SCIENCE↗