Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Plasmons”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18
All sourcesNASA NTRSDOE OSTI
DOE OSTI2026

Inexpensive Hydrogen Storage: Propylene to Propane using Plasmonic Photocatalysis

Chemistry-based hydrogen storage media, such as liquid organic hydrogen carriers, offer an attractive alternative to physical hydrogen storage solutions. Here, we investigate propane as a possible hydrogen storage medium, attractive for its low cost and ease of availability. We report the ambient temperature and pressure hydrogenation of propylene using an antenna-reactor Al@TiO 2 −Pt single-atom plasmonic photocatalyst. Illumination at two distinct wavelengths, 450 and 800 nm, corresponds to high reactivity toward propane production. Theoretical insight into wavelength-dependent hot-carrier generation reveals nonequilibrium carriers with sufficient energies to activate both steps of propylene hydrogenation at either wavelength, the dissociation of H 2 and its incorporation into the propylene carbon− carbon double bond. Paired with light-driven propane dehydrogenation, this study demonstrates that photocatalytic cycling of propylene - propane for hydrogen storage and release can be performed under mild conditions.

alkyls↗
DOE OSTI2023

Plasmonic Terahertz Devices and Sensors Based on Carbon Electronics

Tunable terahertz (THz) photonic devices are imperative in a wide range of applications ranging from THz signal modulation to molecular sensing. One of the currently prevailing methods is based on arrays of metallic or dielectric resonators integrated with functional materials in response to an external stimulus, in which for the purpose of sensing the external stimuli may introduce inadvertent undesirable effects into the target samples to be measured. Here we developed an alternative approach by postprocessing nanothickness macro-assembled graphene (nMAG) films with widely tunable THz conductivity, enabling versatile solid-state THz devices and sensors, showing multifunctional nMAG-based applications. The THz conductivities of free-standing nMAGs showed a broad range from 1.2 x 10 3 S/m in reduced graphene oxide before annealing to 4.0 x 10 6 S/m in a nMAG film annealed at 2800 °C. We fabricated nMAG/dielectric/metal and nMAG/dielectric/nMAG THz Salisbury absorbers with broad reflectance ranging from 0% to 80%. The highly conductive nMAG films enabled THz metasurfaces for sensing applications. Taking advantage of the resonant field enhancement arising from the plasmonic metasurface structures and the strong interactions between analyte molecules and nMAG films, we have successfully detected diphenylamine with a limit of detection of 4.2 pg. Those wafer-scale nMAG films present promising potential in high-performance THz electronics, photonics, and sensors.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Phase control of coherent acoustic phonons in gold bipyramids for optical memory and manipulating plasmon–exciton coupling

Recent efforts have targeted manipulation of nanomaterial vibrational modes in applications such as chemical/mass sensing, optical switching, and phonon-driven photochemistry. While impulsive photoexcitation can generate coherent phonons, multiple excitation pulses offer the prospect of control and manipulation of coherent phonon modes for functions of optical memory and logic. In this work, we use such an approach to inject an arbitrary coherent phonon phase into a colloidal ensemble of highly monodisperse gold bipyramids. We then demonstrate that this technique can be applied to a system that exhibits plasmon-exciton coupling to further manipulate the hybridization of the system. This ability to manipulate acoustic phonons and hybridization can enable optical logic applications of acoustic phonons in addition to optical memory.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Femtosecond photoemission electron microscopy of surface plasmon polariton beam steering via nanohole arrays

Directional control over surface plasmon polariton (SPP) waves is a prerequisite for the development of miniaturized optical circuitry. Here, the efficacy of single and dual component SPP steering elements is explored through photoemission electron microscopy. Our imaging scheme relies on two-color photoemission and counter-propagating SPP generation, which collectively allow SPPs to be visualized in real space. Wave-vector difference mixing between two-dimensional arrays of nanoholes and photon momenta enables SPP steering with directionality governed by the array lattice constant. The magnitude of grating momentum required to achieve counter-propagation guarantees efficient steering over the full range of the negative half-space. In our dual component configuration, separate SPP generation and Bragg diffraction based steering optics are employed. We find that array Bragg planes principally influence the SPP angles through the array band structure, which allows us to visualize both positive and negative refractory waves.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2022

Coherent emission from surface Josephson plasmons in striped cuprates

The interplay between charge order and superconductivity remains one of the central themes of research in quantum materials. In the case of cuprates, the coupling between striped charge fluctuations and local electromagnetic fields is especially important, as it affects transport properties, coherence, and dimensionality of superconducting correlations. Here, we study the emission of coherent terahertz radiation in single-layer cuprates of the La 2-x Ba x CuO 4 family, for which this effect is expected to be forbidden by symmetry. We find that emission vanishes for compounds in which the stripes are quasi-static but is activated when c-axis inversion symmetry is broken by incommensurate or fluctuating charge stripes, such as in La 1.905 Ba 0.095 CuO 4 and in La 1.845 Ba 0.155 CuO 4 . In this case, terahertz radiation is emitted by surface Josephson plasmons, which are generally dark modes, but couple to free space electromagnetic radiation because of the stripe modulation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2021

Strengths of plasmon satellites in XPS: Real-time cumulant approach

Plasmon satellites observed in x-ray photoemission spectra (XPS) reflect many-body effects beyond the single-electron approximation. However, theoretical calculations are challenging and simplified theories based on electron gas models are not always satisfactory. Here, a cumulant Green’s function approach with a real-time time-dependent density functional theory calculation of the cumulant is described for calculations of these effects, without the need for adjustable parameters. Here, the approach yields good agreement with experimental XPS results, as illustrated for Ge and Al. Corrections due to extrinsic losses and interference are also briefly discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

In situ plasmonic tip preparation and validation techniques for scanning tunneling microscopy

Among the many parts constituting a scanning tunneling microscope, the metallic tip is the component that directly interacts with the specimen and plays a critical role in visualizing the physical quantity of interest. While tip materials such as W and Pt–Ir are commonly used for topographic imaging and their preparation is well-documented, the preparation of plasmonic materials such as Ag for tip-enhanced Raman spectroscopy is relatively less standardized. Furthermore, we present several in situ Ag tip preparation and validation techniques for the microscopist to use depending on their intended application, including atomic resolution imaging, scanning tunneling spectroscopy (STM), and tip-enhanced Raman spectro-microscopy in ultrahigh vacuum. Besides optical applications, these methods are not limited to Ag but also applicable to other STM tip materials.

47 OTHER INSTRUMENTATION↗
DOE OSTI2022

Coupled surface plasmon–phonon polariton nanocavity arrays for enhanced mid-infrared absorption

Abstract Resonant optical cavities are essential components in mid-infrared applications. However, typical film-type cavities require multilayer stacks with a micron-thick spacer due to mid-infrared wavelengths, and their performance is limited by narrow frequency tunability and angular sensitivity. We propose and experimentally demonstrate the subwavelength-scale (≈ λ 0 /150) resonant nanocavity arrays that enhance the absorption spectrum of the device in the mid-infrared (10–12 microns) via excitation of coupled surface plasmon–phonon polaritons. The proposed metal–insulator–polar dielectric (gold–silicon–silicon carbide) structure supports a guided mode of the coupled surface polaritons in the lateral direction while vertically confining the mid-infrared wave within the 80 nm thick dielectric spacer. In particular, the subwavelength-scale (≈ λ 0 /10) gratings are imposed to form Fabry–Pérot cavity arrays displaying angle-insensitive and frequency-tunable absorption of up to 80% of the optical power in the mid-infrared. Our work should benefit diverse mid-infrared applications and novel designs of polariton-based photonic devices.

42 ENGINEERING↗
DOE OSTI2024

Plasmonic surface lattice resonances in nanoparticle arrays

This work reviews the literature and provides a detailed computational analysis of the optical properties of one- and two-dimensional arrays of silver and gold nanoparticles, with emphasis on surface lattice resonances (SLRs) that arise when localized plasmon resonances (LSPRs) in the nanoparticles couple to diffraction resonances that are determined by the interparticle spacing to give polariton modes in which the two types of excitations are coherently coupled. The computations are based on the coupled dipole approximation, which provides a nearly quantitative description of the extinction spectra for arrays of this type where the particles are well separated and not too large. The computations are used to determine many characteristics of SLRs associated with the lower polariton mode that is mostly photonic in nature, and we also study the upper polariton that is dominated by the LSPR response, as well as Rayleigh anomalies (RAs) that correspond to purely diffractive excitation. The calculations explore the sensitivity of these excitations to the directions of the incident wave and polarization vectors relative to the array axis, the effect of array spacing and number of particles in the array, and the effect of nanoparticle radius and background refractive indices. Details of the physical mechanisms involved in determining blue- and/or redshifts as structural parameters are varied is provided, with SLR’s being sensitive to far-field coupling, while LSPR’s can also be sensitive to near- and intermediatefield interactions that in some cases are similar to effects found in dye molecule aggregates.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
NASA NTRS1997

Electronically Tunable Color Filter with Surface Plasmon Waves

Last year, I had reported a novel phenomenon of voltage-induced color-selective absorption with surface plasmons (Appl. Phys. Lett. 67, 2749)...A prototype ( of a tunable notch filter) has been built using liquid crystal as the EO material.

Surface↗
NASA NTRS1997

Surface Plasmon Tunable Color Filter and Projection Display

A novel projection display, based on a new phenomenon of voltage-induced color-selective absorption with surface plasmons, are able to generate bright image on a large screen with high efficiency. In addition, neither color filters or nor phosphors are needed to generate the color.

surface↗
NASA NTRS1996

Surface Plasmon Tunable Color Filter and Projection Display

A novel projection display, based on a new phenomenon of voltage-induced color-selective absorption with surface plasmons, are able to generate bright image on a large screen with high efficiency. In addition, neither color filters nor phosphors are needed to generate the color. With the incident beam of ±7° half cone angle, the color purity of this device can be as good as the CRT displays, and the contrast ratio can reach over 200:1.

projection↗
NASA NTRSDate not supplied

Spoof Plasmon Polaritons for NDE Applications an Experimental Demonstration

NASA is exploring the use of microwave spoof plasmon polaritons to detect defects in metallic structures. This work investigates the detection of simulated defects in the form of aluminum wires as small as 1.6 mm diameter and 2mm long that are placed in a grooved aluminum test article. The inclusions simulate manufacturing defects, and the sum of the delta impedance is shown to increase with increasing volume of added metal. A threshold value of 50Ω has been proposed for defect detection. In addition to detecting defects, the technique also estimates the volume of the defect.

Microwave↗
NASA NTRSDate not supplied

Spoof Plasmon Sensing for NDE Application

NASA is exploring the use of microwave spoof plasmon polaritons to detect defects in metallic structures. This work investigates the detection of simulated defects in the form of aluminum wires as small as 1.6 mm diameter and 2 mm long that are placed in a grooved aluminum test article. The inclusions simulate manufacturing defects, and the sum of the delta impedance is shown to increase with increasing volume of added metal. Based on the results, a threshold value of 50Ω has been proposed for defect detection. In addition to detecting defects, the technique also estimates the volume of the defect.

Microwave↗
NASA NTRSDate not supplied

Defect Detection in ISC Cylinder Using Spoof Plasmon Polaritons

NASA is exploring the use of microwave spoof plasmon polaritons to detect defects in integrally stiffened cylinders. This work investigates the detection of simulated defects in the form of aluminum wires as small as 10 mm long and 3.1 mm diameter that are placed in between stiffeners of an ISC. The wires simulate manufacturing inclusions defects, and the sum of the delta impedance is shown to increase with increasing volume of added metal.

spoof↗