Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Particle interactions”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

A numerical method for fully resolved simulation (FRS) of rigid particle-flow interactions in complex flows

A fictitious-domain based formulation for fully resolved simulations of arbitrary shaped, freely moving rigid particles in unsteady flows is presented. The entire fluid-particle domain is assumed to be an incompressible, but variable density, fluid. The numerical method is based on a finite-volume approach on a co-located, Cartesian grid together with a fractional step method for variable density, low-Mach number flows. The flow inside the fluid region is constrained to be divergence-free for an incompressible fluid, whereas the flow inside the particle domain is constrained to undergo rigid body motion. In this approach, the rigid body motion constraint is imposed by avoiding the explicit calculation of distributed Lagrange multipliers and is based upon the formulation developed by Patankar [N. Patankar, A formulation for fast computations of rigid particulate flows, Center for Turbulence Research Annual Research Briefs 2001 (2001) 185-196]. The rigidity constraint is imposed and the rigid body motion (translation and rotational velocity fields) is obtained directly in the context of a two-stage fractional step scheme. The numerical approach is applied to both imposed particle motion and fluid-particle interaction problems involving freely moving particles. Grid and time-step convergence studies are performed to evaluate the accuracy of the approach. Finally, simulation of rigid particles in a decaying isotropic turbulent flow is performed to study the feasibility of simulations of particle-laden turbulent flows.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nanophotonic force microscopy: Characterizing particle–surface interactions using near-field photonics

Direct measurements of particle–surface interactions are important for characterizing the stability and behavior of colloidal and nanoparticle suspensions. Current techniques are limited in their ability to measure pico-Newton scale interaction forces on submicrometer particles due to signal detection limits and thermal noise. In this paper, we present a new technique for making measurements in this regime, which we refer to as nanophotonic force microscopy. Using a photonic crystal resonator, we generate a strongly localized region of exponentially decaying, near-field light that allows us to confine small particles close to a surface. From the statistical distribution of the light intensity scattered by the particle we are able to map out the potential well of the trap and directly quantify the repulsive force between the nanoparticle and the surface. Finally, as shown in this Letter, our technique is not limited by thermal noise, and therefore, we are able to resolve interaction forces smaller than 1 pN on dielectric particles as small as 100 nm in diameter.

36 MATERIALS SCIENCE↗

Effects of field interactions upon particle creation in Robertson-Walker universes

Particle creation due to field interactions in an expanding Robertson-Walker universe is investigated. A model in which pseudoscalar mesons and photons are created as a result of their mutual interaction is considered, and the energy density of created particles is calculated in model universes which undergo a bounce at some maximum curvature. The free-field creation of non-conformally coupled scalar particles and of gravitons is calculated in the same space-times. It is found that if the bounce occurs at a sufficiently early time the interacting particle creation will dominate. This result may be traced to the fact that the model interaction chosen introduces a length scale which is much larger than the Planck length.

Birrell, N. D.↗

Origin of a sensitive dependence of calculated {beta}{beta}-decay amplitudes on the particle-particle residual interaction

In the present work the sensitivity of calculated {beta}{beta}-decay amplitudes to a realistic residual interaction is analyzed in the framework of the approach of O. A. Rumyantsev and M. H. Urin, Phys. Lett. B 443, 51 (1998). and V. A. Rodin, M. H. Urin, and A. Faessler, Nucl. Phys. A 747, 297 (2005). Both the Gamow-Teller (GT) and Fermi (F) matrix elements M{sup 2}{nu} for two-neutrino {beta}{beta} decay (2{nu}{beta}{beta} decay), along with the monopole transition contributions to the total matrix elements M{sup 0{nu}} of neutrinoless {beta}{beta} decay (0{nu}{beta}{beta} decay), are calculated within the quasiparticle random-phase approximation (QRPA). In the aforementioned approach decompositions of M{sup 2{nu}} and M{sup 0{nu}} can be obtained in terms of the corresponding energy-weighted sum rules S. It is shown that in most of the cases almost the whole dependence of M{sup 2{nu}} and M{sup 0{nu}} on the particle-particle (p-p) renormalization parameter g{sub pp} is accounted for by the g{sub pp} dependence of the corresponding sum rules S. General expressions relating S to a realistic residual particle-particle interaction are derived, which show a pronounced sensitivity of S to the singlet-channel interaction in the case of F transitions and to the triplet-channel interaction in the case of GT transitions. Thus, the sensitivity of M{sup 2{nu}} and M{sup 0{nu}} to the SU(4)-symmetry-breaking part of the p-p residual interaction is dictated by the generic structure of the {beta}{beta}-decay amplitudes. Therefore, a choice of this part in a particular calculation needs a special caution. Finally, a better isospin-consistent way of renormalization of a realistic residual p-p interaction to use in QRPA calculations is suggested.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

1.5D Quasilinear Model for Alpha Particle-TAE Interaction in ARIES ACT-I

We study the TAE interaction with alpha particle fusion products in ARIES ACT-I using the 1.5D quasilinear model. 1.5D uses linear analytic expressions for growth and damping rates of TAE modes evaluated using TRANSP profiles to calculates the relaxation of pressure profiles. NOVA-K simulations are conducted to validate the analytic dependencies of the rates, and to normalize their absolute value. The low dimensionality of the model permits calculating loss diagrams in large parameter spaces.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Projected sensitivities of the LUX-ZEPLIN experiment to new physics via low-energy electron recoils

LUX-ZEPLIN is a dark matter detector expected to obtain world-leading sensitivity to weakly-interacting massive particles interacting via nuclear recoils with a ∼7-tonne xenon target mass. This paper presents sensitivity projections to several low-energy signals of the complementary electron recoil signal type: 1) an effective neutrino magnetic moment, and 2) an effective neutrino millicharge, both for 𝑝⁢𝑝-chain solar neutrinos, 3) an axion flux generated by the Sun, 4) axionlike particles forming the Galactic dark matter, 5) hidden photons, 6) mirror dark matter, and 7) leptophilic dark matter. World-leading sensitivities are expected in each case, a result of the large 5.6 t 1000 d exposure and low expected rate of electron-recoil backgrounds in the <100 keV energy regime. A consistent signal generation, background model and profile-likelihood analysis framework is used throughout.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Mesoscale Simulations of Particulate Flows with Parallel Distributed Lagrange Multiplier Technique

Fluid particulate flows are common phenomena in nature and industry. Modeling of such flows at micro and macro levels as well establishing relationships between these approaches are needed to understand properties of the particulate matter. We propose a computational technique based on the direct numerical simulation of the particulate flows. The numerical method is based on the distributed Lagrange multiplier technique following the ideas of Glowinski et al. (1999). Each particle is explicitly resolved on an Eulerian grid as a separate domain, using solid volume fractions. The fluid equations are solved through the entire computational domain, however, Lagrange multiplier constrains are applied inside the particle domain such that the fluid within any volume associated with a solid particle moves as an incompressible rigid body. Mutual forces for the fluid-particle interactions are internal to the system. Particles interact with the fluid via fluid dynamic equations, resulting in implicit fluid-rigid-body coupling relations that produce realistic fluid flow around the particles (i.e., no-slip boundary conditions). The particle-particle interactions are implemented using explicit force-displacement interactions for frictional inelastic particles similar to the DEM method of Cundall et al. (1979) with some modifications using a volume of an overlapping region as an input to the contact forces. The method is flexible enough to handle arbitrary particle shapes and size distributions. A parallel implementation of the method is based on the SAMRAI (Structured Adaptive Mesh Refinement Application Infrastructure) library, which allows handling of large amounts of rigid particles and enables local grid refinement. Accuracy and convergence of the presented method has been tested against known solutions for a falling sphere as well as by examining fluid flows through stationary particle beds (periodic and cubic packing). To evaluate code performance and validate particle contact physics algorithm, we performed simulations of a representative experiment conducted at the University of California at Berkley for pebble flow through a narrow opening.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

New Physics at CDF

The Standard Model (SM) of particle interactions is one of the major achievements of fundamental science. However, despite its success in predicting experimental results through the years, several fundamental issues are left open such as: the origin of dark matter in the universe, the existence of a unifying theory of all known forces and interactions, why particles have the masses we observe and the hierarchy problem. Supersymmetry (SUSY) is one of the possible extensions of the SM. It proposes an additional symmetry that predicts the existence of an additional boson (fermion) for each SM fermion (boson). The appeal of SUSY is closely related to the fact that it naturally solves several of the open questions of the SM. Thus it is extensively tested in an experiment as CDF where many of its signatures can be searched for. On the other hand there is still no compelling reason to exclude other scenarios like Extra-dimensions and New Gauge Interaction Models, a priori. The CDF program in physics beyond the SM is quite rich and here we present some representative searches subdivided in two main categories: SUSY and non-SUSY searches. We present the current status of searches for physics beyond the Standard Model at the Tevatron 1.96-TeV proton-antiproton collider using data collected with the CDF experiment. We cover searches for supersymmetry, extra dimensions and new gauge bosons.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Chaotic Dynamics Driven by Particle-Core Interactions

High-intensity beams in modern linacs are frequently encircled by diffuse halos, which drive sustained particle losses and result in gradual degradation of accelerating structures. In large part, the growth of halos is facilitated by internal space-charge forces within the beams, and detailed characterization of this process constitutes an active area of ongoing research. A partial understanding of dynamics that ensue within space-charge dominated beams is presented by the particle-core interaction paradigm – a mathematical model wherein single particle dynamics, subject to the collective potential of the core, are treated as a proxy for the broader behavior of the beam. In this work, we investigate the conditions for the onset of large-scale chaos within the framework of this model, and demonstrate that the propensity towards stochastic evolution is strongly dependent upon the charge distribution of the beam. In particular, we show that while particle motion within a uniformly charged beam is dominantly regular, rapid deterministic chaos readily arises within space-charge dominated Gaussian beams. Importantly, we find that for sufficiently high values of the beam’s space charge and beam pulsation amplitude, enhanced chaotic mixing between the core and the halo can lead to an enhanced radial diffusion of charged particles. We explain our results from analytic grounds by demonstrating that chaotic motion is driven by the intersection of two principal resonances of the system, and derive the relevant overlap conditions. Additionally, our analysis illuminates a close connection between the mathematical formulation of the particle-core interaction model and the Andoyer family of integrable Hamiltonians

43 PARTICLE ACCELERATORS↗

Quantified Energy Dissipation Rates in the Terrestrial Bow Shock: Waves and Dissipation - 2

We present the first quantified measure of the energy dissipation rates, due to wave-particle interactions, in the transition region of the Earth's collision-less bow shock using data from the Time History of Events and Macro-Scale Interactions during Sub-Storms spacecraft. Our results show that wave-particle interactions can regulate the global structure and dominate the energy dissipation of collision-less shocks. In every bow shock crossing examined, we observed both low-frequency (less than 10 hertz) and high-frequency (approximately or greater than10 hertz) electromagnetic waves throughout the entire transition region and into the magnetosheath. The low-frequency waves were consistent with magnetosonic-whistler waves. The high-frequency waves were combinations of ion-acoustic waves, electron cyclotron drift instability driven waves, electrostatic solitary waves, and whistler mode waves. The high-frequency waves had the following: (1) peak amplitudes exceeding delta B approximately equal to 10 nanoteslas and delta E approximately equal to 300 millivolts per meter, though more typical values were delta B approximately equal to 0.1-1.0 nanoteslas and delta E approximately equal to 10-50 millivolts per meter (2) Poynting fluxes in excess of 2000 microWm(sup −2) (micro-waves per square meter) (typical values were approximately 1-10 microWm(sup −2) (micro-waves per square meter); (3) resistivities greater than 9000 omega meters; and (4) associated energy dissipation rates greater than 10 microWm(sup −3) (micro-waves per cubic meter). The dissipation rates due to wave-particle interactions exceeded rates necessary to explain the increase in entropy across the shock ramps for approximately 90 percent of the wave burst durations. For approximately 22 percent of these times, the wave-particle interactions needed to only be less than or equal to 0.1 percent efficient to balance the nonlinear wave steepening that produced the shock waves. These results show that wave-particle interactions have the capacity to regulate the global structure and dominate the energy dissipation of collision-less shocks.

Terrestrial bow 2↗

Early Career: The search for weakly interacting dark matter with liquid xenon

We report results from a search for weakly interacting dark matter particles obtained with the LUX experiment. LUX was located at a depth of 4850 feet at the Sanford Underground Research Facility in Lead, South Dakota from 2013 through 2016. It found no evidence for dark matter particle interactions and set new constraints on the properties of such particles for masses between 6 GeV and 100 TeV. The work reported here also characterized the performance of such experiments by developing a new calibration technique based upon a tritium beta decay source.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Improved rubber nanofillers

During this task, Silane functionalized TiO2 and HK3Ti4O4(SiO4)3 were sent to Goodyear (GY) for testing. These materials were characterized based on their interaction with the model elastomer, squalene. The Van der Waals interactions and Hamaker Constants for ZnO particles in squalene and rubber materials were characterized and it was determined that a 10-20 nm spacing was necessary between primary filler particles to maintain a stable nanocomposite. Contact angle measurements on the ZnO and ZnO-silane materials indicated that the solvent should wet the particles, and solvophobic attractions should not be present. These studies showed that the surface modification with sulfosilane coupling agents was successful, and high levels of dispersion of the particles remained possible. Further, a novel surface charging phenomenon where negative surface charging is developed in the squalene environment was observed and corroborated by measurements of particle size and of the surface modified materials in squalene. This impacts the dispersion of the particles according to the traditional colloidal interpretation of electrostatic repulsive forces between particles. Additionally, thin nanocomposite fibers were developed using electrospinning. The size and shape of the oxides did not change during the electrospinning process, although the shape of the fiber and the distribution of the particles, particularly for ZnO, was not ideal. There was an obvious increase in elastic modulus and hardness from the addition of the oxides, but differentiating the oxides, and particularly the surfactants, was difficult. The A-1289 lead to the greatest dispersion of the filler particles, while the A-1589 and the NXT produced clustered particle aggregates. This agrees with previous study of these materials in low molecular weight squalene solvent studies reported earlier. The behavior of the nanoparticle ZnO and the microparticle silica is different as well, with the ZnO being contained within the elastomer, and the SiO2 forming monolayers at the surface of the elastomer. The dynamic mechanical analysis did not show clear trends between the surface modification and the aggregate structure. In the silica particles, the NXT led to the least particle interaction, followed by the A-1289 and highest particle interaction found for the A-1589. For the nanosized ZnO, the best dispersion was found for the A-1589, with both the A-1289 and NXT exhibiting frequency dependent responses.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Nonlinear dynamics of beta-induced Alfvén eigenmode in tokamak

The beta-induced Alfvén eigenmode (BAE) excited by energetic particles in toroidal plasmas is studied in the global gyrokinetic simulations. It is found that the nonlinear BAE dynamics depends on the deviation from the marginality. In the strongly driven case, the mode exhibits a bursting state with fast and repetitive chirping. The nonlinear saturation is determined by the thermal ion nonlinearity and has no clear dependence on the linear growth rate. In the weakly driven case, the mode reaches a nearly steady state with small frequency chirping. The nonlinear dynamics is dominated by the energetic particle nonlinearity. In both cases, the nonlinear intensity oscillation and frequency chirping are correlated with the evolution of the coherent structures in the energetic particle phase space. Due to the radial variation of the mode amplitude and the radially asymmetric guiding center dynamics, the wave-particle interaction in the toroidal geometry is much more complex than the conventional one-dimensional wave-particle interaction paradigm.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Search for the standard model Higgs boson in $l\nu+b\bar{b}$ final states in 9.7 fb$^{-1}$ of $p\bar{p}$ collisions with the DØ detector

Humans have always attempted to understand the mystery of Nature, and more recently physicists have established theories to describe the observed phenomena. The most recent theory is a gauge quantum field theory framework, called Standard Model (SM), which proposes a model comprised of elementary matter particles and interaction particles which are fundamental force carriers in the most unified way. The Standard Model contains the internal symmetries of the unitary product group SU(3) c ⓍSU(2) L Ⓧ U(1) Y , describes the electromagnetic, weak and strong interactions; the model also describes how quarks interact with each other through all of these three interactions, how leptons interact with each other through electromagnetic and weak forces, and how force carriers mediate the fundamental interactions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Destruction of {sup 7}Be in big bang nucleosynthesis via long-lived sub-strongly interacting massive particles as a solution to the Li problem

We identify reactions which destroy {sup 7}Be and {sup 7}Li during big bang nucleosynthesis (BBN) in the scenario of BBN catalyzed by a long-lived sub-strongly-interacting massive particle (sub-SIMP or X particle). The destruction associated with nonradiative X captures of the nuclei can be realized only if the interaction strength between an X particle and a nucleon is properly weaker than that between two nucleons to a degree depending on the mass of X. Binding energies of nuclei to an X particle are estimated taking the mass and the interaction strength to nuclei of the X as input parameters. Nuclear reaction rates associated with the X are estimated naively and adopted in calculating evolutions of nuclear abundances. We suggest that the {sup 7}Li problem, which might be associated with as-yet-unrecognized particle processes operating during BBN, can be solved if the X particle interacts with nuclei strongly enough to drive {sup 7}Be destruction but not strongly enough to form a bound state with {sup 4}He of relative angular momentum L=1. Justifications of this scenario by rigorous calculations of reaction rates using quantum mechanical many-body models are highly desirable since this result involves many significant uncertainties.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Effect of Mach number and volume fraction in air-shock interacting with a bed of randomly distributed spherical particles

Shock-particle interaction is a fundamental problem in many engineering applications, with the dynamics being heavily influenced by the incident-shock Mach number and the particle volume fraction. In this paper we present fully resolved inviscid simulations of an incident-shock wave traveling through a bed of randomly distributed spherical particles. We vary the strength of the incident shock along with the particle volume fraction in order to study the complex wave interaction during shock-particle interaction. In this study we are interested in the early-time behavior during which the particles do not move and hence in our simulations all the particles are fixed in space. We compute the streamwise average of flow field quantities to generate the x - t contour plots to study the unsteady oscillations inside the particle bed. We observe that the transmitted shock slows down under certain conditions and it is partly due to tortuosity and partly due to weakening caused by energy dissipation. We also present the force histories of the streamwise drag and lift forces for all the particles. The random distribution of particles leads to high variability in the drag force experienced by the particles. We compute the mean peak drag force as a function of the streamwise location to study the mean behavior of the transmitted shock. Based on our findings, we propose simple modifications to improve the current point-particle models used in Euler-Lagrange simulations of shock interacting with a bed of particles.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Two-way coupled particle-turbulence interaction: Effect of numerics and resolution on fluid and particle statistics

Euler-Lagrange point-particle simulation has emerged as a premier methodology for studying dispersed particle-laden flows. This method's popularity stems from its ability to resolve fine-scale fluid structures while also tracking individual particles at reduced cost using an appropriate particle acceleration model. However, the point-particle model has known convergence issues in that refinement of the fluid grid can lead to changes in the predicted statistics. The reasons for non-convergence are twofold: the point-particle two-way coupling force in the Navier-Stokes equations requires a numerical regularization and, without careful implementation, yields a singular force on the fluid with grid refinement. The second factor that yields grid-dependent statistics is that the point-particle force model in general depends on the undisturbed fluid velocity. When the undisturbed fluid velocity is not robustly modeled in a grid-insensitive way, the calculated force for both particles and fluid will be grid-dependent, contaminating their respective statistics. While the first issue regarding regularizing the point-particle source term has received attention in the literature, the consequences of robustly modeling the undisturbed velocity in the context of grid refinement of turbulence has received little attention. Here, we consider decaying homogeneous isotropic turbulence laden with particles at different Stokes numbers. For a given Stokes number, we systematically refine the grid and demonstrate that explicitly modeling the undisturbed fluid velocity yields relative grid insensitivity for the energy of the particle and fluid phases, as well as acceleration of the particles. We also demonstrate that an appropriately defined dissipation rate is also grid-insensitive when an undisturbed fluid velocity correction is used. In contrast, when the undisturbed fluid velocity is modeled using the conventional approach of interpolating the local fluid velocity to the particle location, we show this procedure yields divergent statistics with grid refinement. In particular, we show that higher-order interpolation of the fluid velocity in two-way coupled problems is worse than lower-order interpolation, in the absence of a correction procedure to estimate the undisturbed fluid velocity. We also examine velocity derivative statistics of the fluid phase and demonstrate that these statistics are not in general convergent even when the undisturbed fluid velocity is explicitly modeled. Collectively, the observations in this paper are used to present a philosophy on the types of questions which are answerable with point-particle methods.

42 ENGINEERING↗

EVIDENCE OF LANDAU AND CYCLOTRON RESONANCE BETWEEN PROTONS AND KINETIC WAVES IN SOLAR WIND TURBULENCE

The wave–particle interaction processes occurring in the solar wind provide crucial information to understand the wave dissipation and simultaneous particle heating in plasma turbulence. One requires observations of both wave fluctuations and particle kinetics near the dissipation range, which have, however, not yet been analyzed simultaneously. Here we show new evidence of wave–particle interactions by combining the diagnosis of wave modes with the analysis of particle kinetics on the basis of measurements from the WIND spacecraft with a high cadence of about 3 s. Solar wind protons appear to be highly dynamic in their velocity distribution consisting of varying anisotropic core and beam components. The basic scenario of solar wind proton heating through wave–particle interaction is suggested to be the following. Left-handed cyclotron resonance occurs continuously, and is evident from the observed proton core velocity distribution and the concurrent quasi-parallel left-handed Alfvén cyclotron waves. Landau and right-handed cyclotron resonances are persistent and indicated by the observed drifting anisotropic beam and the simultaneous quasi-perpendicular right-handed kinetic Alfvén waves in a general sense. The persistence of non-gyrotropic proton distributions may cast new light on the nature of the interaction between particles and waves near and beyond the proton gyro-frequency.

79 ASTRONOMY AND ASTROPHYSICS↗