Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PRODUCTS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Biogenic carbon fluxes from global agricultural production and consumption

Quantification of biogenic carbon fluxes from agricultural lands is needed to generate comprehensive bottom-up estimates of net carbon exchange for global and regional carbon monitoring. We estimated global agricultural carbon fluxes associated with annual crop net primary production (NPP), harvested biomass, and consumption of biomass by humans and livestock. These estimates were combined for a single estimate of net carbon exchange (NCE) and spatially distributed to 0.05 degree resolution using MODIS satellite land cover data. Global crop NPP in 2011 was estimated at 5.25 ± 0.46 Pg C yr-1, of which 2.05 ± 0.05 Pg C yr-1 was harvested and 0.54 Pg C yr-1 was collected from crop residues for livestock fodder. Total livestock feed intake in 2011 was 2.42 ± 0.21 Pg C yr-1, of which 2.31 ± 0.21 Pg C yr-1 was emitted as CO2, 0.07 ± 0.01 Pg C yr-1 was emitted as CH4, and 0.04 Pg C yr-1 was contained within milk and egg production. Livestock grazed an estimated 1.27 Pg C yr-1 in 2011, which constituted 52.4% of total feed intake. Global human food intake was 0.57 ± 0.03 Pg C yr-1 in 2011, the majority of which is respired as CO2. Completed global cropland carbon budgets accounted for the ultimate use of ca. 80% of harvested biomass. The spatial distribution of these fluxes may be used for global carbon monitoring, estimation of regional uncertainty, and for use as input to Earth system models.

Carbon flux, croplands, livestock, MODIS↗

Moving from residual lignocellulosic biomass into high–value products: Outcomes from a long–term international cooperation

Major progress in the bioprocessing of lignocellulose to fuels and value-added chemicals has created the possibility of a low carbon-footprint economy. However, the current complexity and associated costs of lignocellulose conversion result in a higher price for ethanol than for fossil fuels. The cost of cellulosic ethanol production will be lowered by further progress in development of biorefinery technology that produces both ethanol and high-value chemicals with bio-based products that are beginning to penetrate consumer markets in the USA, Brazil, and worldwide. The cost-effectiveness of low carbon-footprint bioproducts will benefit from advances in supplying large amounts of biomass solids to the biorefinery. We describe here outcomes from a successful long-term international cooperation between the Laboratory of Renewable Resources Engineering (LORRE) at Purdue University in the United States and Brazil's Agricultural Research Corporation (EMBRAPA) and Federal University of Sâo Carlos (UFSCar), which has contributed practical pathways to enhance the biorefinery concept. Furthermore, this paper gives an overview of developments that address fundamental knowledge of lignocellulosic biomass pretreatment hydrolysis under optimized operational conditions and bioreactor configurations, and the science and engineering that contributes to the effective production of fuel and ethanol and value-added products from biomass.

09 BIOMASS FUELS↗

Transverse momentum dependence of D-meson production in Pb-Pb collisions at $ \sqrt{{\mathrm{s}}_{\mathrm{NN}}}=2.76 $ TeV

The production of prompt charmed mesons D 0 , D + and D* + , and their antiparticles, was measured with the ALICE detector in Pb-Pb collisions at the centre-of-mass energy per nucleon pair, √ s NN, of 2.76 TeV. The production yields for rapidity |y| < 0.5 are presented as a function of transverse momentum, p T , in the interval 1–36 GeV/c for the centrality class 0–10% and in the interval 1–16 GeV/c for the centrality class 30–50%. The nuclear modification factor R AA was computed using a proton-proton reference at √s = 2.76 TeV, based on measurements at √s = 7 TeV and on theoretical calculations. A maximum suppression by a factor of 5-6 with respect to binary-scaled pp yields is observed for the most central collisions at p T of about 10 GeV/c. A suppression by a factor of about 2-3 persists at the highest p T covered by the measurements. At low pT (1-3 GeV/c), the R AA has large uncertainties that span the range 0.35 (factor of about 3 suppression) to 1 (no suppression). In all p T intervals, the R AA is larger in the 30-50% centrality class compared to central collisions. Furthermore, the D-meson R AA is also compared with that of charged pions and, at large p T , charged hadrons, and with model calculations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Measurement of the production cross section of prompt J/ψ mesons in association with a W ± boson in pp collisions at $ \sqrt{s} $ = 7 TeV with the ATLAS detector

The process pp → W ± J/ψ provides a powerful probe of the production mechanism of charmonium in hadronic collisions, and is also sensitive to multiple parton interactions in the colliding protons. Using the 2011 ATLAS dataset of 4.5 fb -1 of $ \sqrt{s} $ = 7 TeV pp collisions at the LHC, the first observation is made of the production of W ± + prompt J/ψ events in hadronic collisions, using W ± → μν μ and J/ψ → μ + μ - . A yield of 27.4$ ^{+7.5} _{-6.5} $ W ± + prompt J/ψ events is observed, with a statistical significance of 5.1σ. The production rate as a ratio to the inclusive W ± boson production rate is measured, and the double parton scattering contribution to the cross section is estimated.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for direct top squark pair production in events with a Higgs or Z boson, and missing transverse momentum in $ \sqrt{s}=13 $ TeV pp collisions with the ATLAS detector

A search for direct top squark pair production resulting in events with either a same-flavour opposite-sign dilepton pair with invariant mass compatible with a Z boson or a pair of jets compatible with a Standard Model (SM) Higgs boson (h) is presented. Requirements on the missing transverse momentum, together with additional selections on leptons, jets, jets identified as originating from b-quarks are imposed to target the other decay products of the top squark pair. The analysis is performed using proton-proton collision data at √s = 13 TeV collected with the ATLAS detector at the LHC in 2015–2016, corresponding to an integrated luminosity of 36.1 fb –1 . No excess is observed in the data with respect to the SM predictions. The results are interpreted in two sets of models. In the first set, direct production of pairs of lighter top squarks (t ~ 1 ) with long decay chains involving Z or Higgs bosons is considered. The second set includes direct pair production of the heavier top squark pairs (t ~ 2 ) decaying via t ~ 2 → Zt ~ 1 or t ~ 2 → ht ~ 1 . Here, the results exclude at 95% confidence level t ~ 2 and t ~ 1 masses up to about 800 GeV, extending the exclusion region of supersymmetric parameter space covered by previous LHC searches.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of total and differential W + W - production cross sections in proton-proton collisions at √s=8 TeV with the ATLAS detector and limits on anomalous triple-gauge-boson couplings

The production of W boson pairs in proton-proton collisions at √s=8 TeV is studied using data corresponding to 20.3 fb -1 of integrated luminosity collected by the ATLAS detector during 2012 at the CERN Large Hadron Collider. The W bosons are reconstructed using their leptonic decays into electrons or muons and neutrinos. Events with reconstructed jets are not included in the candidate event sample. A total of 6636 WW candidate events are observed. Measurements are performed in fiducial regions closely approximating the detector acceptance. The integrated measurement is corrected for all acceptance effects and for the W branching fractions to leptons in order to obtain the total WW production cross section, which is found to be 71.1 ± 1.1(stat) -5.0+5.7(syst)±1.4(lumi) pb. This agrees with the next-to-next-to-leading-order Standard Model prediction of 63.2-1.4+1.6(scale)±1.2(PDF) pb. Fiducial differential cross sections are measured as a function of each of six kinematic variables. The distribution of the transverse momentum of the leading lepton is used to set limits on anomalous triple-gauge-boson couplings.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Measurement of the Zγ → $\mathcal{v}$$\bar{v}$γ production cross section in pp collisions at $\sqrt{s}=13$ TeV with the ATLAS detector and limits on anomalous triple gauge-boson couplings

The production of Z bosons in association with a high-energy photon ( Z γ production) is studied in the neutrino decay channel of the Z boson using pp collisions at $\sqrt{s}=13$ TeV. The analysis uses a data sample with an integrated luminosity of 36.1 fb -1 collected by the ATLAS detector at the LHC in 2015 and 2016. Candidate Z γ events with invisible decays of the Z boson are selected by requiring significant transverse momentum (ρ τ ) of the dineutrino system in conjunction with a single isolated photon with large transverse energy (Ε τ ). The rate of Z γ production is measured as a function of photon Ε τ , dineutrino system pT and jet multiplicity. Here, evidence of anomalous triple gauge-boson couplings is sought in Z γ production with photon Ε τ greater than 600 GeV. No excess is observed relative to the Standard Model expectation, and upper limits are set on the strength of ZZ γ and Z γγ couplings.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Immobilization of Methylosinus trichosporium OB3b for methanol production

Abstract Due to the natural gas boom in North America, there is renewed interest in the production of other chemical products from methane. We investigated the feasibility of immobilizing the obligate methanotrophic bacterium Methylosinus trichosporium OB3b in alginate beads, and selectively inactivating methanol dehydrogenase (MDH) with cyclopropane to produce methanol. In batch cultures and in semi-continuous flow columns, the exposure of alginate-immobilized cells to cyclopropane or cyclopropanol resulted in the loss of the majority of MDH activity (> 80%), allowing methanol to accumulate to significant concentrations while retaining all of M. trichosporium OB3b’s methane monooxygenase capacity. Thereafter, the efficiency of methanol production fell due to recovery of most of the MDH activity; however, subsequent inhibition periods resulted in renewed methanol production efficiency, and immobilized cells retained methane-oxidizing activity for at least 14 days.

Taylor, Anne↗

Simulation of Gas Production from Multilayered Hydrate-Bearing Media with Fully Coupled Flow, Thermal, Chemical and Geomechanical Processes Using TOUGH+Millstone. Part 3: Production Simulation Results

The TOUGH+Millstone simulator has been developed for the analysis of coupled flow, thermal and geomechanical processes associated with the formation and/or dissociation of CH 4 - /sub>-hydrates in geological media. It is composed of two constituent codes: (a) a significantly enhanced version of the TOUGH+Hydrate simulator, v2.0, that accounts for all known flow, physical, thermodynamic and chemical processes associated with the evolution of hydrate-bearing systems and includes the most recent physical properties relationships, coupled seamlessly with (b) Millstone v1.0, a new code that addresses the conceptual, computational and mathematical shortcomings of earlier codes used to describe the geomechanical response of these systems. The capabilities of the TOUGH+Millstone code are demonstrated in the simulation and analysis of the system flow, thermal, and geomechanical behavior during gas production from a realistic complex offshore hydrate deposit. In the third paper of this series, we apply the simulators described in parts 1 and 2 to a problem of gas production from a complex, multilayered system of hydrate-bearing sediments in an oceanic environment. We perform flow simulations of constant-pressure production via a vertical well and compare those results to a coupled flow-geomechanical simulation of the same process. Finally, the results demonstrate the importance of fully coupled geomechanics when modeling the evolution of reservoir properties during production.

58 GEOSCIENCES↗

Production and Fuel properties of Iso-Olefins with Controlled Molecular Structure and Obtained from Butene Oligomerization

The ability to control the molecular structure (e.g., degree of branching) of iso-olefins produced from oligomerizing light olefins is a valuable tool for tuning the final compositions of hydrocarbon fuels and targeting specific fuel properties. In this study, we demonstrated that the degree of branching of iso-olefins obtained from butene(s) oligomerization can be controlled by tuning process conditions (i.e., temperature, weight hourly space velocity [WHSV], and nature of butene feedstock) and by choosing the proper catalyst (i.e., Amberlyst-36 vs. Y/ZSM-22). In this study, we produced three types of iso-olefin mixtures: 1) a methyl-heptenes rich (74 wt.%) mixture, 2) dimethyl-hexenes rich (80–96 wt.%) mixtures, and 3) highly branched (i.e., more than three methyl substitutions) iso-olefins rich (>50 wt.%) mixtures. While dimethyl-hexenes are preferentially formed at lower temperatures (60–100°C) and WHSV (i.e., 2 hr-1), methyl-heptenes are favorably produced at higher temperatures (>100°C) and WHSVs (i.e., 7 hr-1) over Amberlyst-36. The use of either 1-butene or 2-butene as feedstock resulted in liquid products with similar branching because facile intramolecular isomerization occurs prior to oligomerization. However, the use of isobutylene feedstock forms a significantly more branched olefin product. The formation of highly branched iso-olefins also is favored at higher temperature (140°C) over Amberlyst-36. Using Y/ZSM-22 instead of Amberlyst-36 allowed preferential formation of less-branched methyl-heptenes. For each type of iso-olefins mixture, we determined fuel properties including research octane number (RON), motor octane number (MON), and octane sensitivity (S), which is the difference between RON and MON. We found that not only RON and MON but also S values increased with the degree of branching of these complex mixtures of iso-olefins. The highest RON of 99.7 and S value of 9.3 were obtained for a mixture of highly branched iso-olefins.

Dagle, Vanessa↗

Production and Catalytic Upgrading of 2,3-Butanediol Fermentation Broth into Sustainable Aviation Fuel Blendstock and Fuel Properties Measurement

With the increasing demand for sustainable supplies of aviation fuel and need to address climate change, new conversion technologies are needed to efficiently process biomass, produce high quality jet fuel blendstock, and meet carbon emission targets. This study demonstrates the synthesis, conditioning, and catalytic upgrading of 2,3-butanediol (BDO) fermentation broth into a jet fuel blendstock candidate. A high-titer 2,3-BDO fermentation broth (i.e., ~90 g/L) was produced at a 100-L scale and pretreated via nanofiltration to decrease the impurities level in the broth from 4.6 to 0.6 wt%. A novel process for catalytic upgrading of aqueous 2,3-BDO into a jet fuel blendstock candidate was developed, and each step was efficiently demonstrated. The catalytic steps include 1) 2,3-BDO dehydration into methyl ethyl ketone (MEK) over AlPO4, 2) MEK conversion into olefins over Zn1Zr10Ox, 3) oligomerization of olefins over a zeolite beta, and 4) hydrogenation over platinum/carbon. Both the model feed and real 2,3-BDO fermentation broth were tested for upgrading 2,3-BDO to MEK. With the real feed, a continuous loss of conversion (i.e., >50% loss over ~140 h time-on-stream [TOS]) was partly attributed to reversible deactivation from coking species. However, the conversion remained stable with the model feed, which demonstrates the efficiency of the first step for converting aqueous 2,3-BDO (10 wt% in water). For upgrading MEK to olefins, high selectivity to olefins (i.e., 82.5%) was obtained at high conversion levels (i.e., 93-98%) with stable conditions being achieved for > 70-hours TOS. Oligomerization of light olefins, which was demonstrated for > 270 h TOS, mainly led to the formation of dimers (C8-10) and trimers (C13-14). The oligomerized product was hydrogenated and distilled to recover the jet fraction (35 mass% or 40.9% carbon based yield), which consists mostly of desired isoalkanes (31.7 wt%), n-alkanes (24.5 wt%), and cycloalkanes (29.6 wt%). While some improvement is still needed to meet ASTM D7566 specifications for viscosity and final boiling point temperature, freezing point, density, aromatics content, and sulfur content of the jet blendstock candidate were within acceptable ranges, thus highlighting the potential of this process for production of jet fuel blendstock.

ADVANCED PROPULSION SYSTEMS,BIOMASS FUELS↗