Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHOTODETECTOR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 325 records · Page 18

Characterization and modeling of a ZnO nanowire ultraviolet photodetector with graphene transparent contact

We report the demonstration of a ZnO nanowire ultraviolet photodetector with a top transparent electrode made of a few-layered graphene sheet. The nanowires have been synthesized using a low-cost electrodeposition method. The detector is shown to be visible-blind and to present a responsivity larger than 10{sup 4} A/W in the near ultraviolet range thanks to a high photoconductive gain in ZnO nanowires. The device exhibits a peak responsivity at 370 nm wavelength and shows a sub bandgap response down to 415 nm explained by an Urbach tail with a characteristic energy of 83 meV. The temporal response of the detector and the power dependence are discussed. A model of the photoconductive mechanism is proposed showing that the main process responsible for the photoconductive gain is the modulation of the conducting surface due to the variation of the surface depletion layer and not the reduction of recombination efficiency stemming from the electron-hole spatial separation. The gain is predicted to decrease at high incident power due to the flattening of the lateral band bending in agreement with experimental data.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Evaluating the size-dependent quantum efficiency loss in a SiO{sub 2}-Y{sub 2}O{sub 3} hybrid gated type-II InAs/GaSb long-infrared photodetector array

Growing Y{sub 2}O{sub 3} on 20 nm SiO{sub 2} to passivate a 11 μm 50% cut-off wavelength long-wavelength infrared type-II superlattice gated photodetector array reduces its saturated gate bias (V{sub G,sat}) to −7 V. Size-dependent quantum efficiency (QE) losses are evaluated from 400 μm to 57 μm size gated photodiode. Evolution of QE of the 57 μm gated photodiode with gate bias and diode operation bias reveals different surface recombination mechanisms. At 77 K and V{sub G,sat}, the 57 μm gated photodiode exhibits QE enhancement from 53% to 63%, and it has 1.2 × 10{sup −5} A/cm{sup 2} dark current density at −200 mV, and a specific detectivity of 2.3 × 10{sup 12} Jones.

36 MATERIALS SCIENCE↗

Quantum dot quantum cascade infrared photodetector

We demonstrate an InAs quantum dot quantum cascade infrared photodetector operating at room temperature with a peak detection wavelength of 4.3 μm. The detector shows sensitive photoresponse for normal-incidence light, which is attributed to an intraband transition of the quantum dots and the following transfer of excited electrons on a cascade of quantum levels. The InAs quantum dots for the infrared absorption were formed by making use of self-assembled quantum dots in the Stranski–Krastanov growth mode and two-step strain-compensation design based on InAs/GaAs/InGaAs/InAlAs heterostructure, while the following extraction quantum stairs formed by LO-phonon energy are based on a strain-compensated InGaAs/InAlAs chirped superlattice. Johnson noise limited detectivities of 3.64 × 10{sup 11} and 4.83 × 10{sup 6} Jones at zero bias were obtained at 80 K and room temperature, respectively. Due to the low dark current and distinct photoresponse up to room temperature, this device can form high temperature imaging.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Breakdown mechanisms and reverse current-voltage characteristics of organic bulk heterojunction solar cells and photodetectors

We investigate the reverse current-voltage characteristics and breakdown mechanisms of organic bulk heterojunction solar cells and photodetectors. Dark current and photo current measurements at different temperatures indicate that tunneling is the dominant mechanism at high reverse voltage. A band-to-band tunneling model that accommodates either Gaussian or exponential-parabolic density of states distributions is developed and used for simulations. At high reverse bias, the model explains the observed breakdown, which differs from the bias independent dark current behavior predicted by the Onsager-Braun model. At low reverse voltage, the incorporation of shunt resistance in the model provides good agreement between the measured reverse bias characteristics and simulations.

14 SOLAR ENERGY↗

Anomalous photoconductive behavior of a single InAs nanowire photodetector

We report on a bare InAs nanowire photodetector which exhibits an anomalous photoconductive behavior. Under low-power illumination, the current is smaller than the dark current, and monotonously decreases as the excitation power increases. When the excitation power is high enough, the current starts to increase normally. The phenomenon is attributed to different electron mobilities in the “core” and “shell” of a relatively thick nanowire originating from the surface effect, which result in a quickly dropped “core current” and slowly increased “shell current” under illumination.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of proton irradiation temperature on persistent photoconductivity in zinc oxide metal-semiconductor-metal ultraviolet photodetectors

The electrical and structural characteristics of 50-nm-thick zinc oxide (ZnO) metal-semiconductor-metal ultraviolet (UV) photodetectors subjected to proton irradiation at different temperatures are reported and compared. The devices were irradiated with 200 keV protons to a fluence of 1016 cm−2. Examination of the x-ray diffraction (XRD) rocking curves indicates a preferred (100) orientation prior to irradiation, with decrease in crystal quality afterward. Additionally, peak shifts in XRD and Raman spectra of the control sample relative to well-known theoretical positions are indicative of tensile strain in the as-deposited ZnO films. Shifts toward theoretical unstrained positions are observed in the irradiated films, which indicates partial relaxation. Raman spectra also indicate increase in oxygen vacancies (VO) and zinc interstitial defects (Zni) compared to the control sample. Additionally, transient photocurrent measurements performed on each sample at different temperatures showed up to 2× increase in photocurrent decay time constants for irradiated samples vs the control. This persistent photoconductive behavior is linked to the activation of electron and hole traps near the surface, and to the desorption and reabsorption of O2 molecules on the ZnO surface under the influence of UV light. Using an Arrhenius model, trap activation energies were extracted and, by comparing with known energies from the literature, the dominant defects contributing to persistent photoconductivity for each irradiation condition were identified. The persistence of differences in photocurrent transients between different samples months after irradiation indicates that the defects introduced by the suppression of thermally activated dynamic annealing processes have a long-term deleterious effect on device performance.

Heuser, Thomas A. (ORCID:0000000225642400)↗

Intrinsic polarization-sensitive organic photodetector with self-assembled all-polymer heterojunction

Intrinsic polarization-sensitive photodetectors (IPPDs) have attracted considerable attention in recent years due to their simplicity in configuration, making them ideal candidates for compact and integrated polarization-sensitive sensing and imaging systems. Photoactive films with intrinsic optical anisotropy are necessary for IPPDs. This study reports an achievement of photoactive films based on all-polymer heterojunction films with in-plane optical anisotropy using a simple bottom-up self-assembly method. Both the donor (TQ1) and acceptor (N2200) polymers have the same spatial orientation with distinct anisotropy, approaching a dichroic ratio (DR) of 8. Polarization-sensitive light absorption is due to the uniaxially oriented polymer chains, which are dominated by lamellar packing with edge-on orientation. For IPPDs based on this anisotropic all-polymer heterojunction film, a photocurrent anisotropy was found with a polarized photocurrent ratio of 2.6. The detectivity of these IPPDs was found to be 1.9 × 1011 Jones (@ ∼600 nm, 0 V bias). Our work shows that oriented polymer donor–acceptor films fabricated using bottom-up self-assembly have great potential in applications, such as polarization detection.

Physics↗

Demonstration of a 4.32 μ m cutoff InAsSbBi n B n photodetector, a lattice-matched random alloy III–V solution for mid-wave infrared sensing

InAsSbBi nBn photodetectors are demonstrated that are lattice-matched to the underlying GaSb substrate with a 4.32 μm wavelength cutoff at 150 K that is 0.3 μm longer than that of lattice-matched InAsSb at this temperature reflecting a 0.5% Bi mole fraction in the InAsSbBi active region. A low growth temperature was utilized to facilitate the incorporation of Bi, resulting in a minority carrier lifetime on the order of 24 ns in the InAsSbBi active region. Nevertheless, the detectors exhibit a quantum efficiency of 17% at 3.3 μm wavelength with a dark current density of 50 μA/cm2 at 150 K and −0.4 V bias and the strong photoresponse turn-on characteristic of a random alloy at 4.32 μm wavelength and 150 K. A shot noise-equivalent irradiance analysis indicates that this detectors' dark-current-limited noise-equivalent irradiance of 1012 cm−2 s−1 is two orders of magnitude greater than the Rule 07 expectation for this cutoff, and dark-current-limited shot noise-equivalent irradiance performance transitions to photon-limited at 1.7 × 1015 photons/cm2 s.

Physics↗

MCP-based photodetectors for cryogenic applications

The Argonne MCP-based photo detector is an offshoot of the Large Area Pico-second Photo Detector (LAPPD) project, wherein 6 cm × 6 cm sized detectors are made at Argonne National Laboratory. We have successfully built and tested our first detectors for pico-second timing and few mm spatial resolution. We discuss our efforts to customize these detectors to operate in a cryogenic environment. Initial plans aim to operate in liquid argon. As a result, we are also exploring ways to mitigate wave length shifting requirements and also developing bare-MCP photodetectors to operate in a gaseous cryogenic environment.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Development of a novel, windowless, amorphous selenium based photodetector for use in liquid noble detectors

Detection of the vacuum ultraviolet (VUV) scintillation light produced by liquid noble elements is a central challenge in order to fully exploit the available timing, topological, and calorimetric information in detectors leveraging these media. Here in this paper, we characterize a novel, windowless amorphous selenium based photodetector with direct sensitivity to VUV light. We present here the manufacturing and experimental setup used to operate this detector at low transport electric fields (2.7–5.2 V/μm) and across a wide range of temperatures (77 K–290 K). This work shows that the first proof-of-principle windowless amorphous selenium device is robust under cryogenic conditions, responsive to VUV light at cryogenic temperatures, and preserves argon purity. These findings motivate a continued exploration of amorphous selenium devices for simultaneous detection of scintillation light and ionization charge in noble element detectors.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

A butterfly-shaped acceptor with rigid skeleton and unique assembly enables both efficient organic photovoltaics and high-speed organic photodetectors

ABSTRACT It remains challenging to design efficient bifunctional semiconductor materials in organic photovoltaic and photodetector devices. Here, we report a butterfly-shaped molecule, named WD-6, which exhibits low energy disorder and small reorganization energy due to its enhanced molecular rigidity and unique assembly with strong intermolecular interaction. The binary photovoltaic device based on PM6:WD-6 achieved an efficiency of 18.41%. Notably, an efficiency of 19.42% was achieved for the ternary device based on PM6:BTP-eC9:WD-6. Moreover, the photodetection device based on WD-6 demonstrated an ultrafast response speed (205 ns response time at λ of 820 nm) and a high cutoff frequency of −3 dB (2.45 MHz), surpassing the values of most commercial Si photodiodes. Based on these findings, we showcased an application of the WD-6-based photodetection device in high-speed optical communication. These results offer valuable insights into the design of organic semiconductor materials capable of simultaneously exhibiting high photovoltaic and photodetective performance.

Science & Technology - Other Topics↗

Ultraviolet photodetector based on Mg{sub x}Zn{sub 1-x}O films using plasma-enhanced atomic layer deposition

A plasma-enhanced atomic layer deposition (PE-ALD) system was used to deposit magnesium zinc oxide (Mg{sub x}Zn{sub 1−x}O) films with various Mg content (x). The Mg{sub x}Zn{sub 1-x}O films were applied to metal–semiconductor–metal ultraviolet (UV) photodetectors (MSM-UPDs) as an active layer. The Mg content in the Mg{sub x}Zn{sub 1-x}O films was modulated by adjusting the ZnO–MgO cycle ratios to 15:1, 12:1, and 9:1. Correspondingly, the Mg content in the Mg{sub x}Zn{sub 1-x}O films characterized using an energy dispersive spectrometer was 0.10, 0.13, and 0.16, respectively. The optical bandgap of the Mg{sub x}Zn{sub 1-x}O films increased from 3.56 to 3.66 eV with an increase in Mg content from 0.10 to 0.16. The peak position of photoresponsivity for the Mg{sub x}Zn{sub 1-x}O MSM-UPDs was also shifted from 350 to 340 nm. The UV-visible rejection ratios of the Mg{sub x}Zn{sub 1-x}O MSM-UPDs were higher than 3 orders of magnitude. In addition, excellent detectivity and noise equivalent power for the Mg{sub x}Zn{sub 1-x}O MSM-UPDs were observed at a bias voltage of 5 V. The high performance of the Mg{sub x}Zn{sub 1-x}O MSM-UPDs was achieved by PE-ALD at a low temperature.

36 MATERIALS SCIENCE↗

Ten-element photodetector for optical power and attenuation measurements

The properties of what is, to the best of our knowledge, the first ten-element polarization-dependent transmission trap detector consisting of silicon photodiodes are described. The responsivity and the transmittance of the photodetector were measured at laser wavelengths of 476.2 and 647.1nm. In particular, the effect of the polarization state of the incident radiation on the transmittance was determined. Differences in transmittance of an order of magnitude were observed between s and p polarization. These values were compared with theoretical values calculated using the Fresnel reflection formulas. The difference between the calculated and measured values was less than {+-}3x10{sup -7}. The spatial nonuniformity of the response was measured to be less than {+-}3x10{sup -4}. The transmittance was measured to be spatially uniform across a 5mmx5mm area of the trap detector aperture to within {+-}1.5x10{sup -6} for s-polarized input and within {+-}1.5x10{sup -7} for p-polarized input.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Si⁺-implanted Si-wire waveguide photodetectors for the mid-infrared

CMOS-compatible Si⁺-implanted Si-waveguide p-i-n photodetectors operating at room temperature and at mid-infrared wavelengths from 2.2 to 2.3 µm are demonstrated. Responsivities of 9.9 ± 2.0 mA/W are measured at a 5 V reverse bias with an estimated internal quantum efficiency of 2.7 – 4.5%. The dark current is found to vary from a few microamps down to less than a nanoamp after a post-implantation annealing of 350°C. The measured photocurrent dependence on input power shows a linear correspondence over more than three decades, and the frequency response of a 250 µm-length p-i-n device is measured to be ~1.7 GHz for a wavelength of λ = 2.2 µm, thus potentially opening up new communication bands for photonic integrated circuits.

42 ENGINEERING↗

Response analysis on AlGaN metal–semiconductor–metal photodetectors in a perspective of experiment and theory and the persistent photoconductivity effect

Aluminum gallium nitride (AlGaN) metal–semiconductor–metal photodetectors were successfully fabricated with different contact materials and structures and were tested with ultrafast lasers. The experimental results were compared with the finite element simulations based on APSYS and showed consistent trend in respect to the device I–V properties and response behaviors. Persistent photoconductivity (PPC) was observed for devices with both gold and aluminum contacts and various structures, and the decay time can be longer than 10 ms. The response time and responsivity were found to be affected by the bias voltage, operating temperature, and incident power. The mechanism behind the long decay time is analyzed from the perspective of the materials properties and factors influencing the decay time are examined. The nature of the metal–semiconductor contact is studied to help understand the PPC effect, and the contact showed ohmic-like behavior.

36 MATERIALS SCIENCE↗

Dynamically and continuously tunable infrared photodetector using carbon nanotubes

This report details the progress m ade in realizing a tunable photodetector based on carbon nanotubes. Results are presented for the theory and modeling of the electronic and optical properties of carbon nanotubes, the fabrication of nanotube devices, their electrical testing, and their optoelectronic characterization. The effects of gamma and proton irradiation are also discussed.

Léonard, François↗

Understanding the optoelectronic properties of doped 2D organic-inorganic halide perovskite quantum wells: towards efficient ultrafast quantum well IR photodetectors

This project, titled “Understanding the optoelectronic properties of doped 2D organic-inorganic halide perovskite quantum wells: towards efficient quantum well IR photodetectors”, was funded by the U.S. Department of Energy to explore a new class of materials that could make future light-sensing technologies, such as infrared (IR) cameras and detectors more efficient, affordable, and widely available. The research focused on special layered materials called 2D halide perovskites, which are made up of alternating organic and inorganic layers only a few atoms thick. These materials can be tuned at the atomic level to absorb and emit light in precise ways, making them very attractive for use in optoelectronic devices. The main goal of the project was to understand how these perovskite materials absorb light and move electrical charges at very small scales. However, this is not an easy task. These materials often contain a mixture of different structures in the same film, and traditional tools like regular absorption or photoluminescence spectroscopy are not good at telling those structures apart. To solve this, the research team, led by Professor Luisa Whittaker-Brooks at the University of Utah developed a powerful method called electroabsorption spectroscopy. This technique uses electric fields to highlight the unique “fingerprints” of different excitons, which are tiny packets of energy formed when light hits the material. By using this method, the team could separate overlapping signals and learn exactly how the materials respond to light under different conditions, including changes in temperature, thickness, and chemical makeup.

36 MATERIALS SCIENCE↗

Characterization of Lateral Amorphous Selenium Photodetectors for Low-Photon and VUV Detection at Cryogenic Temperatures

The performance of amorphous selenium (a-Se) as a cryogenic photodetector material is evaluated through a series of experiments using laterally structured devices operated in a custom optical test stand. These studies investigate the response of a-Se detectors to low-photon fluxes at high electric fields near avalanche conditions, the linearity of the photoconductive response over a wide dynamic range and the direct detection of narrowband 130 nm vacuum ultraviolet (VUV) illumination. At 87 K, matched-filter analysis shows reliable single-shot detection with efficiencies greater than or equal to 80 percent and area under the curve (AUC) greater than or equal to 0.85 using as few as approximately 6800 incident 401 nm photons, corresponding to approximately 3400 photons within field-active regions after accounting for geometric constraints. Measurements are performed at cryogenic temperatures using calibrated photon fluxes derived from a silicon photomultiplier reference and a characterized optical filter stack. Additional experiments using a tellurium-doped a-Se (a-SeTe) device explore the material's behavior under identical test conditions and demonstrate that avalanche is achievable in a-SeTe at cryogenic temperatures. The results demonstrate reproducible low-noise operation, VUV sensitivity and field-dependent gain behavior in a lateral a-Se architecture, representing the first reported observation of avalanche multiplication in laterally structured a-Se and a-SeTe devices at cryogenic temperatures. These findings support the potential integration of laterally structured a-Se devices into next-generation pixelated liquid-argon time projection chambers (TPCs) requiring scalable, high-field-compatible photon detection systems.

FOS: Physical sciences↗